Sizing of hybrid photovoltaic-wind energy systems

A procedure is described which determines the sizes of the PV array and wind turbine in a PV/wind energy hybrid system. Using the measured values of solar and wind energy at a given location, the method employs a simple graphical construction to determine the optimum configuration of the two generators that satisfies the energy demand of the user throughout the year.     

Matching Western US electricity consumption with wind and solar resources

The variability of wind and solar is perceived as a major obstacle in employing otherwise abundant renewable energy resources. On the basis of the available geographically dispersed data for the Western USA, we analyze to what extent the geographic diversity of these resources can offset their variability. We determine the best match to loads in the western portion of the USA that can be achieved with wind power and photovoltaics (PV) with no transmission limitations. Without storage and with no curtailment, wind and PV can meet up to 50% of loads in Western USA. It is beneficial to build more wind than PV mostly because the wind contributes at night. When storage is available, the optimal mix has almost 75% as much nominal PV capacity as wind, with the PV energy contribution being 32% of the electricity produced from wind. With only 10 GW of storage (twice the pumped hydro storage capacity that already exists in the Western Electric Coordinating Council), up to 82% of the load can be matched with wind and PV, while in the same time curtailing just 10% of the renewable energy throughout the year. Copyright © 2012 John Wiley & Sons, Ltd.     

Using CAD software to simulate PV energy yield - The case of product integrated photovoltaic operated under indoor solar irradiation

In this paper, we show that photovoltaic (PV) energy yields can be simulated using standard rendering and ray-tracing features of Computer Aided Design (CAD) software. To this end, three-dimensional (3-D) sceneries are ray-traced in CAD. The PV power output is then modeled by translating irradiance intensity data of rendered images back into numerical data. To ensure accurate results, the solar irradiation data used as input is compared to numerical data obtained from rendered images, showing excellent agreement. As expected, also ray-tracing precision in the CAD software proves to be very high. To demonstrate PV energy yield simulations using this innovative concept, solar radiation time course data of a few days was modeled in 3-D to simulate distributions of irradiance incident on flat, single- and double-bend shapes and a PV powered computer mouse located on a window sill. Comparisons of measured to simulated PV output of the mouse show that also in practice, simulation accuracies can be very high. Theoretically, this concept has great potential, as it can be adapted to suit a wide range of solar energy applications, such as sun-tracking and concentrator systems, Building Integrated PV (BIPV) or Product Integrated PV (PIPV). However, graphical user interfaces of ‘CAD-PV’ software tools are not yet available.     

The UK domestic photovoltaics industry and the role of central government

Microgeneration technologies, such as solar photovoltaics, are an increasingly popular alternative for policy makers looking to address security of supply, fuel poverty, and environmental concerns. In the UK, this industry has benefited from government support in the form of grants but there is uncertainty about how microgeneration policy will evolve in the coming years. This paper uses interviews with stakeholders from across the UK PV industry to describe the current business and policy environment before exploring microgeneration policy as a question of joined-up government. Using a policy ‘streams’ framework, it is shown that microgeneration policy in the UK remains largely the domain of one ministry and while there is potential for cross-government promotion of microgeneration, departments must be convinced that microgeneration is a solution to “their” problems before policy coordination and consistency can be improved. While the paper focuses primarily on central government, the increasingly important role of local government in microgeneration policy is also briefly discussed.     

A current and future state of art development of hybrid energy system using wind and PV-solar: A review

The wind and solar energy are omnipresent, freely available, and environmental friendly. The wind energy systems may not be technically viable at all sites because of low wind speeds and being more unpredictable than solar energy. The combined utilization of these renewable energy sources are therefore becoming increasingly attractive and are being widely used as alternative of oil-produced energy. Economic aspects of these renewable energy technologies are sufficiently promising to include them for rising power generation capability in developing countries. A renewable hybrid energy system consists of two or more energy sources, a power conditioning equipment, a controller and an optional energy storage system. These hybrid energy systems are becoming popular in remote area power generation applications due to advancements in renewable energy technologies and substantial rise in prices of petroleum products. Research and development efforts in solar, wind, and other renewable energy technologies are required to continue for, improving their performance, establishing techniques for accurately predicting their output and reliably integrating them with other conventional generating sources. The aim of this paper is to review the current state of the design, operation and control requirement of the stand-alone PV solar–wind hybrid energy systems with conventional backup source i.e. diesel or grid. This Paper also highlights the future developments, which have the potential to increase the economic attractiveness of such systems and their acceptance by the user.     

Analyzing major challenges of wind and solar variability in power systems

Ambitious policy targets together with current and projected high growth rates indicate that future power systems will likely show substantially increased generation from renewable energy sources. A large share will come from the variable renewable energy (VRE) sources wind and solar photovoltaics (PV); however, integrating wind and solar causes challenges for existing power systems. In this paper we analyze three major integration challenges related to the structural matching of demand with the supply of wind and solar power: low capacity credit, reduced utilization of dispatchable plants, and over-produced generation. Based on residual load duration curves we define corresponding challenge variables and estimate their dependence on region (US Indiana and Germany), penetration and mix of wind and solar generation. Results show that the impacts of increasing wind and solar shares can become substantial, and increase with penetration, independently of mix and region. Solar PV at low penetrations is much easier to integrate in many areas of the US than in Germany; however, some impacts (e.g. over-production) increase significantly with higher shares. For wind power, the impacts increase rather moderately and are fairly similar in US Indiana and Germany.     

Alternatives to grid extension for rural electrification: Decentralized renewable energy technologies in Vietnam

This paper examines the economic viability of stand-alone, household-sized renewable energy technologies, namely wind generator and solar PV for application in remote and rural areas of Vietnam. Three reference technologies are chosen. These are two solar PV systems of 130 and 100 Wp for solar conditions in the North and the South, respectively, and one 150 W wind turbine. It is found for all regions that levelized costs of PV energy are lower than the cost of energy from gasoline gen-set, and are cost-competitive with grid extension, especially for areas with low load density and low number of households to be electrified. Regarding wind energy, the viability is dependent on the location due to the wide variation of wind resource to topography. However, in locations with proper resources, wind energy is even more cost-competitive than solar PV. Thus, the use of either wind generator or solar PV is economically feasible in rural villages and remote areas of Vietnam. Policy recommendations for promoting the market development of renewable energy technologies are discussed in the final section of the paper.     

Assessment of renewable energy resources potential for electricity generation in Bangladesh

Renewable energy encompasses a broad range of energy resources. Bangladesh is known to have a good potential for renewable energy, but so far no systematic study has been done to quantify this potential for power generation. This paper estimates the potential of renewable energy resources for power generation in Bangladesh from the viewpoint of different promising available technologies. Estimation of the potential of solar energy in Bangladesh is done using a GIS-based GeoSpatial Toolkit (GsT), Hybrid System Optimization Model for Electric Renewables (HOMER) model and NASA Surface Meteorology and Solar Energy (SSE) solar radiation data. The potential of wind energy is estimated by developing a Bangladesh wind map using NASA SSE wind data and HOMER model. A review of country's biomass and hydro potential for electricity generation is presented. The technical potential of gird-connected solar PV is estimated at 50,174 MW. Assuming that 1000 h per year of full power is the feasible threshold for the exploitation of wind energy, the areas that satisfy this condition in the country would be sufficient for the installation of 4614 MW of wind power. The potential of biomass-based and small hydro power plants is estimated at 566 and 125 MW, respectively. The renewable energy resources cannot serve as alternative to conventional energy resources, yet they may serve to supplement the long-term energy needs of Bangladesh to a significant level.     

Optimal sizing study of hybrid wind/PV/diesel power generation unit

In this paper, a methodology of sizing optimization of a stand-alone hybrid wind/PV/diesel energy system is presented. This approach makes use of a deterministic algorithm to suggest, among a list of commercially available system devices, the optimal number and type of units ensuring that the total cost of the system is minimized while guaranteeing the availability of the energy. The collection of 6 months of data of wind speed, solar radiation and ambient temperature recorded for every hour of the day were used. The mathematical modeling of the main elements of the hybrid wind/PV/diesel system is exposed showing the more relevant sizing variables. A deterministic algorithm is used to minimize the total cost of the system while guaranteeing the satisfaction of the load demand. A comparison between the total cost of the hybrid wind/PV/diesel energy system with batteries and the hybrid wind/PV/diesel energy system without batteries is presented.The reached results demonstrate the practical utility of the used sizing methodology and show the influence of the battery storage on the total cost of the hybrid system.     

Review of research on autonomous wind farms and solar parks and their feasibility for commercial loads in hot regions

In the wake of rising cost of oil and fears of its exhaustion coupled with increased pollution, the governments world-wide are deliberating and making huge strides to promote renewable energy sources such as solar–photovoltaic (solar–PV) and wind energy. Integration of diesel systems with hybrid wind–PV systems is pursued widely to reduce dependence on fossil-fuel produced energy and to reduce the release of carbon gases that cause global climate change. Literature indicates that commercial/residential buildings in the Kingdom of Saudi Arabia (KSA) consume an estimated 10–40% of the total electric energy generated. The study reviews research work carried out world-wide on wind farms and solar parks. The work also analyzes wind speed and solar radiation data of East-Coast (Dhahran), KSA, to assess the technical and economic potential of wind farm and solar PV park (hybrid wind–PV–diesel power systems) to meet the load requirements of a typical commercial building (with annual electrical energy demand of 620,000 kWh). The monthly average wind speeds range from 3.3 to 5.6 m/s. The monthly average daily solar global radiation ranges from 3.61 to 7.96 kWh/m². The hybrid systems simulated consist of different combinations of 100 kW wind machines, PV panels, supplemented by diesel generators. NREL (and HOMER Energy's) HOMER software has been used to perform the techno-economic study. The simulation results indicate that for a hybrid system comprising of 100 kW wind capacity (37 m hub-height) and 40 kW of PV capacity together with 175 kW diesel system, the renewable energy fraction (with 0% annual capacity shortage) is 36% (24% wind + 12% PV). The cost of generating energy (COE, $/kWh) from this hybrid wind–PV–diesel system has been found to be 0.154 $/kWh (assuming diesel fuel price of 0.1$/L). The study exhibits that for a given hybrid configuration, the number of operational hours of diesel generators decreases with increase in wind farm and PV capacity. Attention has also been focused on wind/PV penetration, un-met load, excess electricity generation, percentage fuel savings and reduction in carbon emissions (relative to diesel-only situation) of different hybrid systems, cost break-down of wind–PV–diesel systems, COE of different hybrid systems, etc.     

Domestic integration of micro-renewable electricity generation in Ireland – The current status and economic reality

The utilisation of renewable energy resources for power generation is extremely important for Ireland due to the lack of indigenous fossil fuel resources. A micro-wind turbine is by far the most commonly used grid-connected micro-renewable electricity generation system for domestic applications in Ireland, followed by solar PV. Unfortunately, neither a single micro-wind turbine nor a single solar PV system can provide a continuous power supply due to variations in weather and climate conditions. The coupling of these two systems however can improve the power supply reliability by using the complementary characteristics of wind and solar energy. In this paper, a micro-renewable electricity-generation-system integration technique, tailored for applications in Ireland but generally applicable, is presented. Net present value is the parameter used to identify the optimal system. The optimal system can be a mono system, formed from a single micro-wind turbine or a single solar PV system, or a hybrid system formed from a combination of both. A renewable energy requirement is a constraint used in the integration to eliminate systems that cannot provide sufficient energy from renewable energy resources. The integration technique is applied to find the optimal system, under current Irish conditions, that can be formed from six sample micro-wind turbines and/or solar PV systems assembled from three sample solar PV modules. The analyses show that, with a 50% renewable energy requirement, the optimal system is a mono system containing a 2.4 kW micro-wind turbine; however, critically, the system is not economically viable. Four parameter studies assessing the effect of household electrical load, imported electricity price, exported electricity tariff and wind speed have also been conducted. From these studies it is seen that the most effective way to improve the financial performance of all systems is to offer a higher exported electricity tariff; installing a mono/hybrid system containing a micro-wind turbine in a location with a good wind resource can also have a significant effect.     

A mobile off-grid platform powered with photovoltaic/wind/battery/fuel cell hybrid power systems

Cross utilization of photovoltaic/wind/battery/fuel cell hybrid-power-system has been demonstrated to power an off-grid mobile living space. This concept shows that different renewable energy sources can be used simultaneously to power off-grid applications together with battery and hydrogen energy storage options. Photovoltaic (PV) and wind energy are used as primary sources and a fuel cell is used as backup power. A total of 2.7 kW energy production (wind and PV panels) along with 1.2 kW fuel cell power is supported with 17.2 kWh battery and 15 kWh hydrogen storage capacities. Supply/demand scenarios are prepared based on wind and solar data for Istanbul. Primary energy sources supply load and charge batteries. When there is energy excess, it is used to electrolyse water for hydrogen production, which in turn can either be used to power fuel cells or burnt as fuel by the hydrogen cooker. Power-to-gas and gas-to-power schemes are effectively utilized and shown in this study. Power demand by the installed equipment is supplied by batteries if no renewable energy is available. If there is high demand beyond battery capacity, fuel cell supplies energy in parallel. Automatic and manual controllable hydraulic systems are designed and installed to increase the photovoltaic efficiency by vertical axis control, to lift up & down wind turbine and to prevent vibrations on vehicle. Automatic control, data acquisition, monitoring, telemetry hardware and software are established. In order to increase public awareness of renewable energy sources and its applications, system has been demonstrated in various exhibitions, conferences, energy forums, universities, governmental and nongovernmental organizations in Turkey, Austria, United Arab Emirates and Romania.     

Renewable decentralized in developing countries: Appraisal from microgrids project in Senegal

Sahelian developing countries depend heavily on oil-import for the supply of their increasing energy demand. This setup leads to an imbalance in the balance of payment, an increase of debt and budget asphyxia, whereas renewable resources are widely and abundantly available. The objective of this paper is to carry out a feasibility analysis of off-grid stand-alone renewable technology generation system for some remote rural areas in one Sahelian country. A survey conducted in 2006, within the framework of microgrids project, in rural areas located in three different regions in Senegal (Thies, Kaolack and Fatick) permits determination of demand estimations. Two reference technologies are chosen, namely a solar photovoltaic (PV) system of 130 Wc for solar endowment and a wind turbine of 150 W for wind speed. Taking into account the life-cycle-cost and the environmental externalities costs, our results show that the levelized electricity costs of PV technology are lower than the cost of energy from the grid extension for all these three regions. Thus, decentralized PV technologies are cost-competitive in comparison to a grid extension for these remote rural areas. For wind technology viabilities results are attained with a requirement demand lower than 7. 47 KWh/year for Thies and 7.884 KWh/year for the two remaining areas, namely Kaolack and Fatick. The additional advantage of the proposed methodology is that it allows the environmental valuation of energy generated from non-renewable resource.     

风光互补发电系统的优化设计(I) CAD设计方法

给出了一整套利用CAD进行风光互补发电系统优化设计的方法。为了精确确定系统每小时的运行状态,采用了更精确地表征组件特性及评估实际获得的风光资源的数学模型。为了寻找出以最小设备投资成本满足用户用电要求的系统配置,首先在风力发电机容量固定不变的前提下,计算了与该容量风力发电机匹配的不同容量的PV方阵和蓄电池所组成的风/光/蓄组合的全年功率供给亏欠率LPSP,根据总的设备投资成本最小化的原则筛选出一组与该容量风力发电机对应的满足用户给定系统供电可靠性即LPSP值的风/光/蓄组合;然后通过改变风力发电机的容量,优选出多个与不同容量风力发电机对应的既能满足用户用电要求同时总的设备购置成本又是最低的风/光/蓄组合,比较它们的成本最终唯一确定出以最小投资成本满足用户用电要求的优化的系统配置。     

Optimal operation of microgrid using hybrid differential evolution and harmony search algorithm

This paper proposes the generation scheduling approach for a microgrid comprised of conventional generators, wind energy generators, solar photovoltaic (PV) systems, battery storage, and electric vehicles. The electrical vehicles (EVs) play two different roles: as load demands during charging, and as storage units to supply energy to remaining load demands in the MG when they are plugged into the microgrid (MG). Wind and solar PV powers are intermittent in nature; hence by including the battery storage and EVs, the MG becomes more stable. Here, the total cost objective is minimized considering the cost of conventional generators, wind generators, solar PV systems and EVs. The proposed optimal scheduling problem is solved using the hybrid differential evolution and harmony search (hybrid DE-HS) algorithm including the wind energy generators and solar PV system along with the battery storage and EVs. Moreover, it requires the least investment.     

The importance of detailed data utilization on the performance evaluation of a grid-independent hybrid renewable energy system

In this study, a multi-source hybrid power system consisting of wind turbine (WT), photovoltaic (PV) solar unit, proton exchange membrane (PEM) FC and battery is proposed. The WT and PV generation systems are considered as the main power sources for utilizing the available renewable energy. The FC system is proposed as the back-up generation combined with electrolyzer unit and battery picks up the fast load transients and ripples. In such a hybrid system, energy management plays an important role for the overall system performance and durability. From this perspective, a fuzzy logic based intelligent controller is considered in this study. Besides, a detailed minute-scale meteorological and load demand data is utilized in the simulation process and the importance of utilization of such detailed data is presented. This detailed analysis may be valuable for evaluating the feasibility of grid-independent hybrid renewable energy units for upcoming power systems.     

Optimal configuration assessment of renewable energy in Malaysia

This paper proposes the use of a PV–wind–diesel generator hybrid system in order to determine the optimal configuration of renewable energy in Malaysia and to compare the production cost of solar and wind power with its annual yield relevant to different regions in Malaysia namely, Johor, Sarawak, Penang and Selangor. The configuration of optimal hybrid system is selected based on the best components and sizing with appropriate operating strategy to provide a cheap, efficient, reliable and cost-effective system. The various renewable energy sources and their applicability in terms of cost and performance are analyzed. Moreover, the annual yield and cost of energy production of solar and wind energy are evaluated. The Simulations were carried out using the HOMER program based on data obtained from the Malaysian Meteorological Centre. Results show that, for Malaysia, a PV–diesel generator hybrid system is the most suitable solution in terms of economic performance and pollution. However, the cost of production of solar and wind energy proved to be cheaper and more environmentally friendly than the energy produced from diesel generators.     

Energy supply for water electrolysis systems using wind and solar energy to produce hydrogen: a case study of Iran

Due to acute problems caused by fossil fuels that threaten the environment, conducting research on other types of energy carriers that are clean and renewable is of great importance. Since in the past few years hydrogen has been introduced as the future fuel, the aim of this study is to evaluate wind and solar energy potentials in prone areas of Iran by the Weibull distribution function (WDF) and the Angstrom-Prescott (AP) equation for hydrogen production. To this end, the meteorological data of solar radiation and wind speed recorded at 10 m height in the time interval of 3 h in a five-year period have been used. The findings indicate that Manjil and Zahedan with yearly wind and solar energy densities of 6004 (kWh/m²) and 2247 (kWh/m²), respectively, have the greatest amount of energy among the other cities. After examining three different types of commercial wind turbines and photovoltaic (PV) systems, it becomes clear that by utilizing one set of Gamesa G47 turbine, 91 kg/d of hydrogen, which provides energy for 91 car/week, can be produced in Manjil and will save about 1347 L of gasoline in the week. Besides, by installing one thousand sets of X21-345 PV systems in Zahedan, 20 kg/d of hydrogen, enough for 20 cars per week, can be generated and 296 L of gasoline can be saved. Finally, the RETScreen software is used to calculate the annual CO₂ emission reduction after replacing gasoline with the produced hydrogen.     

Comparison of renewable fuels based on their land use using energy densities

In this article energy densities of selected renewable fuels are determined. Energy density is defined here as the annual energy production per hectare, taking energy inputs into account. Using 5 scenarios, consisting of 1 set focusing on technical differences and 1 set focusing on geographical variations, the range of energy densities currently obtained in Europe was determined for the following fuels: biodiesel from rapeseed; bioethanol from sugar beet; electricity from wood, wind and solar PV.The energy densities of the fuels produced from biomass were calculated by determining the energy contained in the energy carrier produced from the crop annually produced on 1 ha, from which the energy inputs for crop cultivation and conversion were subtracted. For wind and solar electricity, the energy density calculation was based on the energy production per turbine or cell and the number of turbines or cells per hectare after which the manufacturing energy was subtracted.Comparing the results shows that, for the average energy density scenarios, the ratio between the energy densities for wind, solar, and biomass is approximately 100:42:1, with wind electricity also having the highest energy output/input ratio.A case study was done in which the energy density was used to calculate the distance a vehicle can cover using the energy carrier annually produced per hectare. This was done for 3 regions, in Mid-Sweden, North-Netherlands, and South-East Spain. The results of the case show that wind electricity results in the largest distance covered, except in Spain, where solar electricity is the most favourable option.     

Cost effectiveness of decentralized energy supply systems taking solar and wind utilization plants into account

In this article, results are presented of annual simulations of a decentralized (regional) plant for the power and heat supply of a residential complex. This complex consists of four houses with 40 flats all in all. The annual power consumption of the complex is 157 MWh and the heat requirement is 325 MWh. The concrete dynamics of the energy demands over the year is taken into consideration. The energy supply system is composed of a power-controlled combined heat and power (CHP) plant (55 kW), a photovoltaic plant (PV array or PV plant) array for power generation as well as a field of solar thermal collectors with a short-term accumulator for water heating and a long-term accumulator for supplying heat for domestic heating purposes. Simulation results demonstrate that synergetic effects result from the combination of a CHP plant with wind power and PV plants of varying sizes, which have an effect on the cost effectiveness of the plant as a whole with the different dynamics of energy sources (wind and solar energies) and of the consumption of power and heat being the decisive factors. The power deficits of wind power and PV plants are compensated through the application of a natural gas-operated CHP plant. In almost all variants, the demand for fossil energy carriers is distinctly less than in conventional energy supply plants.