Porous copper fiber sintered felts with surface microchannels for methanol steam reforming microreactor for hydrogen production

In this study, a laser micro-milling technique was introduced into the fabrication process of surface microchannels with different geometries and dimensions on the porous copper fiber sintered felts (PCFSFs). The PCFSFs with surface microchannels as catalyst supports were then used to construct a new type of laminated methanol steam reforming microreactor for hydrogen production. The microstructure morphology, pressure drop, velocity and permeability of PCFSF with surface microchannels were studied. The effect of surface microchannel shape (rectangular, stepped, and polyline) and catalyst loading amount on the reaction performance of methanol steam reforming microreactor for hydrogen production was further investigated. Our results show that the PCFSF with rectangular microchannels demonstrated a lower pressure drop, higher average velocity and higher permeability compared to the stepped and polyline microchannel. Furthermore, the PCFSF with rectangular microchannels also exhibited the highest methanol conversion and H₂ flow rate. The best reaction performance of methanol steam reforming microreactor for hydrogen production was obtained using PCFSF with rectangular microchannels when 0.5 g catalyst was loaded.     

Hydrogen production from cylindrical methanol steam reforming microreactor with porous Cu-Al fiber sintered felt

In this study, the porous Cu-Al fiber sintered felt (PCAFSF) was fabricated by low temperature solid-phase sintering method. The laminated PCAFSF as the catalyst support was used for cylindrical methanol steam reforming microreactor for hydrogen production. The two-layer impregnation method was employed to coat the Cu/Zn/Al/Zr catalyst on the PCAFSF. The material composition, specific surface area and catalyst loading of PCAFSF were also measured. The effect of the fiber material, surface morphology and porosity on the reaction performance of methanol steam reforming microreactor for hydrogen production was further investigated. Our results show that the PCAFSF demonstrated much higher methanol conversion and H₂ flow rate compared to the porous Cu fiber sintered felt (PCFSF) and porous Al fiber sintered felt (PAFSF) having the same porosity. Furthermore, the rough PCAFSF showed much higher methanol conversion and H₂ flow rate compared to the smooth PCAFSF. In case of the PCAFSF, the methanol conversion and H₂ flow rate were increased with the decrease of Cu fiber weight and the increase of Al fiber weight. The best reaction performance of microreactor for hydrogen production was obtained using the three layer PCAFSFs with 80% porosity and 1.12 g Cu fiber/1.02 g Al fiber.     

Oriented linear cutting fiber sintered felt as an innovative catalyst support for methanol steam reforming

A kind of oriented linear cutting fiber sintered felt as an innovative catalyst support for methanol steam reforming was proposed. Multiple long copper fibers fabricated by cutting method were arranged in parallel and then sintered together in a mold pressing equipment under the condition of high temperature and protective gas atmosphere. The characteristics of oriented linear cutting fiber sintered felt coated with Cu/Zn/Al/Zr catalyst for methanol steam reforming were experimental investigated under different GHSVs and reaction temperatures. Results indicated that the structure of sintered felt was the key influencing factor for the reaction performances on the condition of low GHSV or reaction temperature whereas the structure of sintered felt showed little influences with high GHSV or reaction temperature. By the analysis of SEM image and ultrasonic vibration testing method, it was found that the coarse surface pattern of cutting fiber could effectively enhance the adhesion intensity between the catalyst and the copper fibers, as well as present relatively large specific surface area in the microchannels. And hence the oriented linear cutting fiber sintered felt present better performances of methanol steam reforming than the oriented linear copper wire sintered felt on the condition of low GHSV or reaction temperature.     

Preparing a novel gradient porous metal fiber sintered felt with better manufacturability for hydrogen production via methanol steam reforming

The porous copper fiber sintered felts with gradient porosity structure (gradient PCFSFs) as catalyst supports is beneficial for heat and mass transfer for methanol steam reforming (MSR). However, the previously developed gradient PCFSF based on the velocity distribution introduces curved interface between different porosity portions, making the mold pressing method for its preparation more sensitive to tiny process changes. To improve its manufacturability, a novel gradient PCFSF with planar interface (PCFSF-SLR) is proposed in this paper by fabrication with multi-step mold pressing and solid phase sintering method using cutting copper fibers. Furthermore, MSR experiments under different gas hourly space velocities and reaction temperatures are conducted to verify the characteristics of PCFSF-SLR loaded with Cu/Zn/Al/Zr catalyst. The results have shown that the reaction characteristics of the PCFSF-SLR were similar to those with curved interfaces, and PCFSF-SLRs with a middle portion porosity of 0.9 have better hydrogen production performance and lower carbon monoxide concentration. More importantly, the results indicated that the methanol conversion and hydrogen flow rate of the gradient PCFSF with planar interface and porosity of 0.7-0.9-0.8 were close or even almost the same with that of the best gradient PCFSFs with curved interface and porosities of 0.7-0.9-0.8 and 0.8-0.9-0.7. Therefore, the proposed PCFSF-SLR provides a superior alternative to gradient PCFSFs with better manufacturability.     

Numerical study of flow distribution uniformity for the optimization of gradient porosity configuration of porous copper fiber sintered felt for hydrogen production through methanol steam reforming micro-reactor

A macroscopic numerical method is proposed to study the flow distribution uniformity of a novel porous copper fiber sintered felt (PCFSF), which has gradient porosities and was developed as the methanol steam reforming micro-reactor catalyst support for hydrogen production for fuel cell applications. The macroscopic porous media developed by the ANSYS/FLUENT software is used to represent the PCFSF. Our results indicate that the gradient porosity can reshape the flow distribution of PCFSFs greatly, thus producing significant influence on their performance. It is further revealed that, for a PCFSF with a determined gradient porosity configuration but different reactant feed directions, the velocity uniformity can be used as a quantitative criterion to evaluate the performance of hydrogen production. Furthermore, new gradient PCFSFs are produced according to the flow distribution of original gradient PCFSFs. The preliminary experimental results of the new gradient PCFSFs of 0.8-0.9-0.7 and 0.7-0.9-0.8 exhibit better methanol conversion and H₂ flow rate. This indicates that the numerical method can be used for the optimization of PCFSFs' gradient porosity configuration, which consists of the shape and position of the interfaces between different porosity portions, the number of interfaces and the porosity distribution in different portions.     

Factors influencing methanol steam reforming inside the oriented linear copper fiber sintered felt

A kind of oriented linear copper fiber sintered felt as a catalyst support for methanol steam reforming is briefly introduced in this work. The sintered felt porosity, sintered felt length and manifold shape as three fundamental influencing factors are experimental investigated their effects on the performances of methanol steam reforming. Experimental results indicate that the sintered felt with moderate porosity and long sintered felt length can effectively enhance the reaction performances of methanol steam reforming. The sintered felt with symmetric triangle manifold can achieve better reaction performances than the one with oblique triangle manifold. However, it is also found that the structural parameters of sintered felt and manifold shape show little influence on the methanol steam reforming at low GHSVs and reaction temperatures. Among these influencing factors, the sintered felt length showed much more influences on the performances of methanol steam reforming than the sintered felt porosity and manifold shape at high reaction temperature.     

Design and performance evaluation of flexible tubular microreactor for methanol steam reforming reaction

To obtain the flexible microreactor for potential application in constrained space, a novel flexible tubular microreactor was designed by using a corrugated shell and a high porosity porous copper fiber rod (PCFR) as catalyst support. The effect of placement position, bending direction, and bending angle on reaction performance of flexible tubular microreactor was investigated. Then, the stability of flexible tubular microreactor was further evaluated. The experimental results showed that the placement position and bending direction had a significant influence on the reaction performance of flexible tubular microreactor. Methanol conversion of flexible tubular microreactor with the vertical placement was 6.67% higher than that with horizontal placement. Higher methanol conversion and H₂ flow rate were obtained when the microreactor bent along the vertical direction. The reaction performance of flexible tubular microreactor was found to decrease as the bending angle increased, and the methanol conversion decreased by around 14.07% with a bend of 90°. When the flexible tubular microreactor was horizontal placed with a bend of 60° in the vertical direction, the reaction performance of microreactor was not changed little after 20 cyclic bending. After continuous bending for 10 h, the methanol conversion and H₂ flow rate of flexible tubular microreactor were 70.58% and 0.88 mol/h, showing good reaction performance.     

Feasibility study of porous copper fiber sintered felt: A novel porous flow field in proton exchange membrane fuel cells

A novel porous flow field made of the porous copper fiber sintered felt (PCFSF) is developed for proton exchange membrane (PEM) fuel cells. The feasibility of this material is systematically investigated involving fabrication, characterization and application. The experimental results reveal that a lower cutting speed helps prevent the fibers from formation failure and morphological defects. A lower feed rate and a smaller back-cutting depth both reduce the equivalent diameter of the copper fibers. The sintering temperature, time and pressure combine to affect the formation quality of the PCFSF which has three-dimensional network structure with open pores distributed stochastically. The wettability tests show that the PCFSF is hydrophobic and the contact angle increases with the increase of porosity. The corrosion behaviors of the PCFSF in simulated PEM fuel cell environment prove that the PCFSF without any coating and alloying treatment is not quite competent, although the Cu corrosion does not critically happen in the tested fuel cell. The resistance tests demonstrate that the combined total electrical resistance of the composite bipolar plate is smaller than the graphite plate. The single-cell tests show that the performance of the fuel cell with the PCFSF flow field is acceptable. The effects of the operating parameters such as the anode operating pressure and cathode air flow rate are also explored.     

A novel thermally autonomous methanol steam reforming microreactor using SiC honeycomb ceramic as catalyst support for hydrogen production

Methanol steam reforming (MSR) is an attractive option for in-situ hydrogen production and to supply for transportation and industrial applications. This paper presents a novel thermally autonomous MSR microreactor that uses silicon carbide (SiC) honeycomb ceramic as a catalyst support to enhance energy conversion efficiency and hydrogen production. The structural design and working principle of the MSR microreactor are described along with the development of a 3D numerical model to study the heat transfer and fluid flow characteristics. The simulation results indicate that the proposed microreactor has a significantly low drop in pressure and more uniform temperature distribution in the SiC ceramic support. Further, the microreactor was developed and an experimental setup was conducted to test its hydrogen production performance. The experimental results show that the developed microreactor can be operated as thermally autonomous to reach its target working temperature within 9 min. The maximum energy efficiency of the microreactor is 67.85% and a hydrogen production of 316.37 ml/min can be achieved at an inlet methanol flow rate of 360 μl/min. The obtained results demonstrate that SiC honeycomb ceramic with high thermal conductivity can serve as an effective catalyst support for the development of MSR microreactors for high volume and efficient hydrogen production.     

Feasibility of preparing additive manufactured porous stainless steel felts with mathematical micro pore structure as novel catalyst support for hydrogen production via methanol steam reforming

In this paper, an additive manufacturing prepared porous stainless steel felt (AM-PSSF) is proposed as a novel catalyst support for hydrogen production via methanol steam reforming (MSR). In the method, 316 L stainless steel powder with diameter of 15–63 μm is processed by the additive manufacturing technology of selective laser melting (SLM). To accomplish the preparation, the reforming chamber where the AM-PSSF is embedded is firstly divided into an all-hexahedron mesh. Then, the triply periodic minimal surface (TPMS) unit with mathematical form, high interconnectivity and large specific surface area is mapped into the hexahedrons based on shape function, forming the fully connected three-dimensional (3D) micro pore structure of the AM-PSSF. By correlating the mathematical parameter and the porosity of the TPMS unit, and taking into account the SLM process, the porosity of the AM-PSSF is well controlled. Based on the designed 3D pore structure model, the AM-PSSF is produced using standard SLM process. The application of the AM-PSSF as catalyst support for hydrogen production through MSR indicates that: 1) both the naked and catalyst-coated AM-PSSF have the characteristics of high porosity, large specific surface area and high connectivity; 2) the MSR hydrogen production performance of the AM-PSSF is better than that of the commercial stainless steel fiber sintered felt. The feasibility of AM-PSSF as catalyst support for MSR hydrogen production may pave a better way to balance different requirements for catalyst support, thanks to the excellent controllability provided by AM on both the external shape and the internal pore structure, and to the produced rough surface morphology that benefits the catalyst adhesion strength. In addition, catalyst support with pore structures that are more accommodated with the flow field and the reaction rate of MSR reaction may be prepared in future, since the entire catalyst support structure, from macro scale to micro scale, is under control.     

Development of methanol steam reforming microreactor based on stacked wave sheets and copper foam for hydrogen production

Methanol steam reforming has been used for in-situ hydrogen production and supply for proton exchange membrane fuel cell (PEMFC), while its power density and energy efficiency still needs to be improved. Herein, we present a novel methanol steam reforming microreactor based on the stacked wave sheets and copper foam for highly efficient hydrogen production. The structural of stacked wave sheets and copper foam, and their roles in the microreactor are described, methanol catalytic combustion is adopted to supply heat for methanol steam reforming reaction and enables the microreactor to work automatically. For catalyst carrier, a fractal body-centered cubic model is established to study the flow characteristics and chemical reaction performances of the copper foam with coated catalyst layer. Both simulation and experimental results showed that the reformate flowrate increases with the increasing of microreactor layers and methanol solution flowrate, the discrepancies of methanol conversion between simulation and experimental tests are less than 7%. Experimental results demonstrated that the reformate flowrate of 1.0 SLM can be achieved with methanol conversion rate of 65%, the output power of the microreactor is 159 W and power density is 395 W/L. The results obtained in this study indicates that stacked wave sheets and copper foam can uniform the reactant flow and improve the hydrogen production performances.     

One-step growth of CuO/ZnO/CeO2/ZrO2 nanoflowers catalyst by hydrothermal method on Al2O3 support for methanol steam reforming in a microreactor

CuO/ZnO/CeO₂/ZrO₂ nanoflowers catalyst was grown on an Al₂O₃ foam ceramic by a one-step hydrothermal process, while a naked Al₂O₃ foam ceramic and an Al₂O₃ foam ceramic grown with ZnO nanorods that directly impregnated into the catalyst precursor solution were also fabricated simultaneously. The morphology, composition, redox property and specific surface area of catalysts on the three ceramics were investigated in detail. The catalyst-loaded ceramics were used as catalyst supports in a microreactor to study the catalytic performance for methanol steam reforming. Results showed that the microreactor with Al₂O₃ support grown with nanoflowers catalyst achieved 99.8% methanol conversion rate, 0.16 mol/h H₂ flow rate at 310 °C, and an inlet methanol flow rate of 0.048 mol/h. Moreover, the microreactor exhibited 92% methanol conversion rate after 30 h continuous reaction.     

Structural design of self-thermal methanol steam reforming microreactor with porous combustion reaction support for hydrogen production

To replace the traditional electric heating mode and increase methanol steam reforming reaction performance in hydrogen production, methanol catalytic combustion was proposed as heat-supply mode for methanol steam reforming microreactor. In this study, the methanol catalytic combustion microreactor and self-thermal methanol steam reforming microreactor for hydrogen production were developed. Furthermore, the catalytic combustion reaction supports with different structures were designed. It was found that the developed self-thermal methanol steam reforming microreactor had better reaction performance. Compared with A-type, the △T_max of C-type porous reaction support was decreased by 24.4 °C under 1.3 mL/min methanol injection rate. Moreover, methanol conversion and H₂ flow rate of the self-thermal methanol steam reforming microreactor with C-type porous reaction support were increased by 15.2% under 10 mL/h methanol-water mixture injection rate and 340 °C self-thermal temperature. Meanwhile, the CO selectivity was decreased by 4.1%. This work provides a new structural design of the self-thermal methanol steam reforming microreactor for hydrogen production for the fuel cell.     

Hydrogen production employing Cu/Zn-BTC metal-organic framework on cordierite honeycomb ceramic support in methanol steam reforming process within a microreactor

Three metal-organic frameworks Cu-BTC, Zn-BTC, and Cu/Zn-BTC were prepared and impregnated in nitrate solutions to obtain the precursors. After calcination, three metal-BTC-derived CuO/ZnO/CeO₂/ZrO₂ catalysts were obtained. The samples were characterized and the catalyst-coated cordierite honeycomb ceramics were used in a microreactor for methanol steam reforming at different reaction conditions. Results showed that the Cu/Zn-BTC-derived catalyst exhibited the most fine and uniform particles, the best reducibility, the largest specific surface area, and the optimal surface elemental state due to the difference in the formation mechanisms, resulting in its remarkable catalytic performance. The ceramic support coated with Cu/Zn-BTC-derived catalyst could achieve 100% methanol conversion rate and 0.336 mol/h H₂ output at 260 °C in the microreactor. Stability tests demonstrated that the Cu/Zn-BTC-derived catalyst could maintain its excellent performance without deactivation within 30 h continuous reaction, which was connected with the Ce–Zr–O solid solution with high concentration of oxygen vacancies and surface oxygen.     

Hydrogen production in microreactor using porous SiC ceramic with a pore-in-pore hierarchical structure as catalyst support

Porous SiC ceramic as catalyst support with porous CuO/ZnO/CeO₂/ZrO₂ catalyst was fabricated via solution combustion method and used in a microreactor. A pore-in-pore hierarchical structure was formed on the support by using glycol as the fuel. The effects of fuel/nitrates molar ratio on the particle size, residual carbon, reducibility and structure of catalyst on the support were investigated. The optimal content of glycol was proposed and the catalytic performance of microreactor was further studied. Results showed that the catalyst loading amount was about 20% weight of the whole support and the loading intensity was strong. Moreover, the microreactor achieved a 100% methanol conversion rate at 280 °C and the conversion rate stayed around 95% after 30 h reaction by using the support over the optimal content of glycol, which exhibited excellent superiority in the methanol steam reforming process.     

A study of steam methanol reforming in a microreactor

Steam reforming of methanol is investigated numerically considering both heat and mass transfer of the species in a packed bed microreactor. The numerical results are shown to be in good agreement with experimental data [M.T. Lee, R. Greif, C.P. Grigoropoulos, H.G. Park, F.K. Hsu, J. Power Sources Transport in, 166 (2007) 194–201] with a BASF F3-01(CuO/ZnO/Al₂O₃) catalyst. A correlation for the conversion efficiency of methanol has been obtained as a function of the operating temperature and a dimensionless time parameter which represents the ratio of the characteristic time of the methanol flow to the time for chemical reaction. The results show that for the constant wall temperature condition the steam reforming process of methanol results in a nearly uniform temperature throughout the microreactor over the range of operating conditions.     

A performance study of methanol steam reforming in an A-type microchannel reactor

The methanol steam reforming (MSR) performance in a microchannel reactor is directly related to the flow pattern design of the microchannel reactor. Hydrogen production improvements can be achieved by optimal design of the flow pattern. In this study, an A-type microchannel reactor with a flow pattern design of one inlet and two outlets was applied to conduct the MSR for hydrogen production. The MSR performance of the A-type microchannel reactor was investigated through numerical analysis by establishing a three-dimensional simulation model and compared with that of the conventional Z-type microchannel reactor. Experiments were also conducted to test the MSR performance and validate the accuracy of the simulation model. The results showed that compared with the conventional Z-type microchannel reactor, the species distributions in the A-type microchannel reactor were more homogeneous. In addition, compared with the Z-type microchannel reactor, the A-type microchannel reactor was shown to effectively increase the methanol conversion rate by up to 8% and decrease the pressure drop by about 20%, regardless of a slightly higher CO mole fraction. It was also noted that with various quantities of microchannels and microchannel cross sections, the A-type microchannel reactor was still more competitive in terms of a higher methanol conversion rate and a lower pressure drop.     

Methanol steam reforming microreactor with novel 3D-Printed porous stainless steel support as catalyst support

In order to study the methanol steam reforming performance of the 3D-printed porous support for hydrogen production, three dimensional (3D) printing technology was proposed to fabricate porous stainless steel supports with body-centered cubic structure (BCCS) and face-centered cubic structure (FCCS). Catalyst loading strength of the 3D-printed porous stainless steel supports was studied. Moreover, methanol steam reforming performance of different 3D-printed porous supports for hydrogen production was experimentally investigated by changing reaction parameters. The results show that the 3D-printed porous stainless steel supports with BCCS and FCCS exhibit better catalyst loading strength, and can be used in the microreactor for methanol steam reforming for hydrogen production. Compared with 90 pores per inch (PPI) Fe-based foam support, 3D-printed porous stainless steel supports with FCCS and BCCS show the similar methanol steam reforming performance for hydrogen production in the condition of 6500 mL/(g·h) gas hourly space velocity (GHSV) with 360 °C reaction temperature. This work provides a new idea for the structural design and fabrication of the porous support for methanol steam reforming microreactor for hydrogen production.     

Synergetic integration of a methanol steam reforming cell with a high temperature polymer electrolyte fuel cell

In this work an integrated unit, combining a methanol steam-reforming cell (MSR-C) and a high temperature polymer electrolyte membrane fuel cell (HT-PEMFC) was operated at the same temperature (453 K, 463 K and 473 K) allowing thermal integration and increasing the system efficiency of the combined system. A novel bipolar plate made of aluminium gold plated was built, featuring the fuel cell anode flow field in one side and the reformer flow field on the other. The combined unit (MSR-C/HT-PEMFC) was assembled using Celtec^® P2200N MEAs and commercial reforming catalyst CuO/ZnO/Al₂O₃ (BASF RP60). The water/methanol vaporisation originates oscillations in the vapour flowrate; reducing these oscillations increase the methanol conversion from 93% to 96%. The MSR-C/HT-PEMFC showed a remarkable high performance at 453 K. The integrated unit was operated during ca. 700 h at constant at 0.2 A cm^?2, fed alternately with hydrogen and reformate at 453 K and 463 K. Despite the high operating temperature, the HT-PEMFC showed a good stability, with an electric potential difference decreasing rate at 453 K of ca. 100 μV h^?1. Electrochemical impedance spectroscopy (EIS) analysis revealed an overall increase of the ohmic resistances and charge transfer resistances of the electrodes; this fact was assigned to phosphoric acid losses from the electrodes and membrane and catalyst particle size growth.     

Trapezoidal cavity for high reforming temperature performance of auto-thermal methanol steam reforming micro-reactor for hydrogen production

To realize high reforming temperature performance of auto-thermal methanol steam reforming micro-reactor (ATMSRM) for hydrogen production (HP) and enhance its long-term HP performance, a trapezoidal cavity on methanol steam reforming (MSR) chamber plate is proposed. A numerical simulation model of the ATMSRM for HP is built. The influence of different geometric sizes of the trapezoidal cavity on reforming temperature performance of ATMSRM is investigated by the numerical simulation model. The reforming temperature performance and HP performance of ATMSRMs using the optimal trapezoidal cavity, the combustion reaction support (CRS) with optimal multiple micro-channels and the non-optimization are compared. The reforming temperature performance and HP performance of the size-enlarged ATMSRM with the optimal trapezoidal cavity are also studied. The results show that compared to other trapezoidal cavities, reforming temperature difference per 1 °C (△TA) of the ATMSRM using the F-type trapezoidal cavity with 50 mm length, 76 mm width, 0.4 mm front end depth and 0.2 mm back end depth is smaller, which is 0.01709 °C °C^?1 under 0.9 mL/min combustion methanol injection rate and 4 mL/h reforming methanol-water mixture injection rate. Compared with ATMSRMs using the CRS with optimal multiple micro-channels and the non-optimization, ATMSRM using F-type trapezoidal cavity has a better comprehensive HP performance. Compared with non-enlarged ATMSRM using F-type trapezoidal cavity, size-enlarged ATMSRM using F-type trapezoidal cavity has bigger △TA, larger reforming methanol conversion rate, higher hydrogen yield and more carbon monoxide selectivity. This research work offers a new method for enhancing reforming temperature performance of ATMSRM for HP.