The novel [(dME)2(HIM)P]2Ti(IV) complex: synthesize, characterization, and its utility in ROP of d,l-lactide

The novel {2,4-bis(1,1-dimethylethyl)-6-{[(2-hydroxyethyl)imino]methyl}phenoxy}₂ titanium(IV) complex {[(dME)₂(HIM)P]₂Ti(IV)} had been synthesized and characterized by EA, XRF, IR, and NMR methods. The [(dME)₂(HIM)P]₂Ti(IV) complex was reactive and promoted ring-opening polymerization (ROP) of d,l-lactide in the presence of benzyl alcohol (BnOH). And the results showed that ROP of d,l-lactide were produced upon addition of an excess (1–8?equiv.) of external BnOH. The complex showed a living and controlled fashion (M _w/M _n?=?1.15–1.32) for ROP of d,l-lactide and could produce the poly(d,l-lactide) with average molecular weight (M _n) up to 8.87?×?10⁴?g?mol^?1. The mechanism study by ¹H NMR spectrum of poly(d,l-lactide) with terminal benzyl ester group and [(dME)₂(HIM)P]₂Ti(IV) complex revealed that the polymerization proceeded through the traditional activated monomer mechanism and the acyl-oxygen bond cleavage mode of monomer. And the ¹³C NMR spectra and TG/DSC analysis showed that poly(d,l-lactide) was essential atactic and thermal stable polymer.     

Synthesis of ε-caprolactone-b-l-lactide block copolymers by mean sequential polymerization,using diphenylzinc as initiator

Block copolymers of ε-caprolactone (CL) and l-lactide (l-LA) were synthesized by sequential polymerization using diphenylzinc as initiator. The composition of the copolymers was adjusted changing the comonomers in ratio. Copolymers were characterized by ¹H-NMR, ¹³C-NMR, DSC, and GPC. Results indicate that poly(ε-caprolactone)-b-poly(l-lactide) (PCL-b-PLA) block copolymers had a narrow molecular weight distribution and well-controlled sequences without random placement.     

Synthesis of genistein-containing star-shaped homo- and copolyesters by the ring-opening polymerization

A novel initiator, naturally occurring in soy, has been developed for a direct synthesis of aliphatic star-shaped homo- and copolyesters. The synthesis is based on one of several known isoflavones, genistein, which has been employed as an initiator of homopolymerization of poly(l-Lactide) or co-initiator of copolymerization of ε-caprolactone and l-Lactide with Sn(Oct)₂ as a catalyst. The non-toxic chemicals used allow for an inexpensive and safe for human body facile synthesis of biocompatible functionalized polymers suitable for medical and pharmaceutical applications. The obtained polymers were characterized by ¹H, ¹³C NMR, FT-IR, SEC–MALLS and MALDI-TOF MS analysis.     

Aggregation of polylactide with carboxyl groups at one chain end in the presence of metal cations

Polylactides with one or more carboxyl groups at one chain end were synthesized by cationic polymerization according to activated monomer mechanism and by application of “thiol-yne” click chemistry for subsequent functionalization. End groups of such obtained polylactides were converted into ionic groups by neutralization of polymer solutions with metal oxides, mainly calcium oxide, and the aggregation of individual stereoisomers as well as that of the mixture of poly(l-lactide) (PLLA) and poly(d-lactide) (PDLA) was investigated. The extent and progress of the aggregation was followed by viscosity measurements, and aggregated polymers in the solid state were examined by SEM and DSC. Solution viscosity increase was observed upon the aggregation of individual PLA stereoisomers, whereas PLA stereocomplex precipitation occurred in the case of the aggregation of PLLA/PDLA/metal oxide mixture.     

Non-isothermal cold crystallization behavior and kinetics of poly(l-lactide): effect of l-lactide dimer

The effects of l-lactide dimer as additives on the crystallization behavior of poly(l-lactide) (PLLA) films were studied. Hence, neat PLLA films and PLLA containing l-lactide (5 % w/w) (PLLA/La) were prepared in dichloromethane at room temperature via solution casting. The non-isothermal cold crystallization of PLLA films were studied using differential scanning calorimetry at various heating rates including 2.5, 5, 7.5, 10 and 15 °C/min. However, the X _C% was increased for PLLA/La films in comparison with neat PLLA films. The crystallization kinetics was then analyzed by the Avrami, Jeziorny, Ozawa and Mo kinetic models. It is found that all the kinetic models were established to describe the experimental data fairly well except the Ozawa model. The values of t _1/2, Z _C and F(T) indicated that the crystallization rate increased with increase in heating rates for PLLA and PLLA/La films. However, l-lactide dimer incorporated in PLLA films accelerates the crystallization process of PLLA at the high heating rate. The nucleation constant (K _g) and the surface free energy (σ _e) based on Lauritzen–Hoffman theory indicated that these parameters for PLLA/La films is lower than neat PLLA.     

Immobilized iron Schiff base histidine complexes on Al-MCM-41 and zeolite Y as catalyst for oxidation of cycloalkanes

Iron complexes of N-salicylidene-l-histidine with or without bipyridine ligand immobilized on Al-MCM-41 and zeolite Y designated as Fe(sal-l-his)(bipy)complex/Al-MCM-41 or Fe(sal-l-his)complex/Al-MCM-41 and Fe(sal-l-his)(bpy)complex/Y or Fe(sal-l-his)complex/Y respectively, were prepared and characterized by X-ray powder diffraction (XRD), FT-IR, N₂ adsorption/desorption and chemical analysis techniques. Fe(sal-l-his)/Al-MCM-41 and Fe(sal-l-his)(bipy)complex/Al-MCM-41 were found to successfully catalyze the oxidation of cyclohexane, methyl cyclohexane, cyclooctane and adamantane with H₂O₂. The oxidation results and promising catalytic behavior of Fe(sal-l-his)(bipy)complex/Al-MCM-41 for oxidation of cyclooctane with 90 % conversion and excellent selectivity toward the formation of cyclooctanone will be discussed in this presentation.     

Poly(ester amide)s based on l-lactic acid oligomers and glycine: the role of the central unit of the l-lactic acid oligomers and their molecular weight in the poly(ester amide)s properties

Novel biodegradable poly(ester amide)s (PEAs) based on l-lactic acid (l-LA) oligomers and glycine were successfully synthesized, through an easy and fast procedure, making use of inexpensive starting materials. The l-LA oligomers were prepared with different central units and different molecular weights in order to access the influence of such parameters in the final properties of the PEAs’. Both the central unit of the l-LA oligomer and its molecular weight have important influence in the PEAs’ final properties. The thermal stability is lower for the PEAs containing the l-LA with the shortest central unit and for the PEAs based on the l-LA oligomers of high molecular weight. The PEAs exhibit a semi-crystalline nature, except those derived from the l-LA oligomers with high molecular weight, which have an amorphous character. Both hydrolytic and enzymatic degradation are more pronounced in PEAs synthesized from the l-LA oligomers with low molecular weight. Different mechanisms of degradation were found for the PEAs: bulk erosion and surface erosion, for hydrolytic degradation and enzymatic degradation tests, respectively.     

Effect of l-Histidine Substitution on Sol–Gel of Transition Metal Coordinated Poly Ethyleneimine: Synthesis and Biochemical Characterization

The study was aimed to investigate the effect of chemical modification of branched poly ethyleneimine (PEI) on chelation of transition metal ions (Me²⁺) including Zn²⁺, Cu²⁺ or Ni²⁺ and sol–gel conversion thereof. To modulate chelation property of PEI, imidazole moieties were introduced into the polymer backbone by carbodiimide chemistry at different molar ratios of fmoc-protected l-histidine. The synthesis was characterized by ¹H-NMR spectroscopy and size exclusion chromatography. Potentiometric titration of PEI/Me²⁺ aqueous dispersions showed formation of stable complexes at pH above 5 depending on the degree of l-histidine substitution. FT-IR spectroscopy showed the imidazole ring of l-histidine was involved in the coordination interactions between PEI and Me²⁺. Addition of Zn²⁺ to PEI solution induced sol–gel conversion at a critical molar ratio decreasing by a higher degree of l-histidine modification. The gelation process led to formation of stable globular nanostructures as confirmed by atomic force microscopy with projected mean diameters less than 200 nm. Cellular experiment showed that l-histidine substitution enhanced cyto-compatibility of PEI, moreover cytotoxicity decreased significantly upon coordination of Zn²⁺ with the polymers. Conclusively, the coordination complexes of Zn²⁺ and l-histidine substituted PEI could serve as a nano system for biomedical applications.     

Amprometric detection of Glycine, l-Serine, and l-Alanine using glassy carbon electrode modified by NiO nanoparticles

Glassy carbon electrode modified with nickel oxide nanoparticles has been used to investigate the electrochemical oxidation of Glycine, l-Serine, and l-Alanine in an alkaloid solution. The electrochemical behavior of the modified electrode was characterized by cyclic voltammetry in detail. The electrocatalytic behavior is further exploited as a sensitive detection scheme for the above amino acids by hydrodynamic amperometry. Under optimized conditions, the calibration curves are linear in the concentration ranges of 1–200?μM for Glycine, 1–400?μM for l-Serine, and 30–200?μM for l-Alanine, respectively. The respective detection limit (S/N?=?3) and sensitivity are 0.9?μM and 24.3 nA μM^?1 for Glycine, 0.85?μM and 12.4 nA μM^?1 for l-Serine, and 29.67?μM and 0.4 nA μM^?1 for l-Alanine. The prepared electrode exhibits a satisfactory stability and long life-time, while it is stored at ambient conditions.     

Optimization of temperature swing strategy for selective cooling crystallization of α-form l-glutamic acid crystals

l-glutamic acid can be crystallized as metastable α-form and stable β-form crystal. The α-form is desired because of its prismatic shape. Production of α-form of l-glutamic acid by cooling crystallization is not well-defined and α-form solid is commercially not available. In this study, an optimal cooling strategy to selectively produce large and narrowly distributed α-crystals is found by modeling and optimizing the crystallization and polymorphic transformation of l-glutamic acid. The optimal temperature profile is found to be cooling-heating-cooling concept where short nucleation period is followed by growth period in metastable zone. The obtained α-form of L-glutamic acid by optimal strategy had improved mean size, distribution, and purity compared to constant cooling.     

Glycolyzed poly(ethylene terephthalate) waste and castor oil-based polyols for waterborne polyurethane adhesives containing hexamethoxymethyl melamine

Glycolysis of poly(ethylene terephthalate) (PET) waste using different molar ratio of poly(ethylene glycol) (PEG400), was used to produce saturated hydroxyl-functional polyester polyols with castor oil (CO) by transesterification process. The waterborne polyurethane (WBPU) adhesives were synthesized from these saturated polyester polyols, isophorone diisocyanate (IPDI), dimethylolpropionic acid (DMPA), and hexamethoxymethyl melamine (HMMM) as cross-linking agent by a conventional prepolymer process. The glycolyzed polyols and polyester polyos formations were characterized using Fourier transform infrared spectroscopy (FTIR) and the molecular weights were determined using gel permeation chromatography (GPC). The cross-linking reaction between WBPU and HMMM was verified using FTIR and ¹H NMR analysis. Thermal properties were investigated by thermogravimetric analysis (TG). Thermal stability of cross-linked WBPU significantly increased with decreasing castor oil content in the process of transesterification to obtain polyester polyol as a soft segment. The T_15% and T_50% (the temperature where 15 and 50% weight loss occurred) of WBPU increased with the decreasing of castor oil content in the obtained polyester polyols, caused by the steric hindrance of polyester polyol with higher castor oil content, in the process of cross-linking reactions with HMMM. The physico-mechanical properties of WBPU, such as hardness, adhesion test, and gloss of the dried films were also determined considering the effect of participation of HMMM in cross-linking reactions with polyurethane, on coating properties.     

An Interesting Complex: [Cd(l -trp) (d-trp)] n

A novel coordination polymer [Cd(l-trp) (d-trp)] _n (where l-trp and d-trp are l-tryptophan and d-tryptophan or (S)-2-amino-3-(3-indolyl)propionic acid and (R)-2-amino-3-(3-indolyl)propionic acid) was prepared by a solvent-thermal method and characterized by elemental analysis, IR spectra and single-crystal X-ray diffraction. The compound(monoclinic space group P2(1)/c with a = 19.759(2) Å, b = 5.2496(10) Å, c = 9.7594(16) Å, β = 97.2760(10)°, Z = 2) shows a two-dimensional plane structure. The crystallized coordination polymer has a centrosymmetric space group. Each Cd²⁺ ion coordinates with a pair of racemes, and the complex is a mesomer. Although l-trp was used, both l-trp and d-trp appear in the complex.     

Poly(l-lactide) initiated by silver N-heterocyclic carbene complexes: synthesis, characterization and properties

Poly(l-lactide) (PLLA) was successfully synthesized by ring-opening polymerization (ROP) in bulk using silver N-heterocyclic carbene (Ag–NHC) complex. The effect of reaction time, temperature and monomer/initiator ratio on polymerization process were determined. The optimum conditions were found as 130 °C, 4 h and M/I molar ratio of about 100. The polymers were characterized by FTIR, ¹H-NMR, GPC and TG. High-molecular-weight PLLA (M _w = 3.78 × 10⁴, M _n = 1.91 × 10⁴, PDI = 1.97) was synthesized by the ROP of l-lactide (LLA) with bis-(N-methyl N′-dodecylimidazole) silver(I) di-bromo argentate (1a) in bulk. The effect of different N-substituted ligand groups on the polymerization was studied. The antimicrobial activity of the synthesized polymers were investigated by using minimum inhibitory concentration test against gram positive (Staphylococcus aureus) and gram negative (Escherichia coli and Pseudomonas aeruginosa). It was observed that the synthesized polymers displayed moderate antimicrobial activity.     

Preparation of polyurethane wood adhesives by polyols formulated with polyester polyols based on castor oil

The aim of this work was the synthesis of polyester polyols from renewable sources as one of the important compounds of polymeric polyurethane (PU) adhesives. The polyester polyols were synthesized by condensation polymerization of different dicarboxylic acids with castor oil and the reaction conditions were in agreement with green chemistry principles. The preparation of PU wood adhesives was carried out by the reaction of each obtained polyester polyol with 4, 4′-diphenylmethane diisocyanate (MDI). The adhesive performance was improved by mixing the obtained polyester polyols with polypropylene glycol (PPG 400) and butanediol (BD). Different NCO/OH ratios were used to obtain adhesives with appropriate properties. The structures of the synthesized polyesters and adhesives were characterized by FTIR, thermogravimetric analysis (TGA) and lap shear strength values were also determined in various conditions such as cold water, hot water, acid and alkali solutions.     

l-Carnitine and Long-Chain Acylcarnitines are Positively Correlated with Ambulatory Blood Pressure in Humans: The SABPA Study

The prevalence of hypertension in sub-Saharan Africa is increasing rapidly, and treatment remains challenging. Although the use of l-carnitine in treatment has received much attention, studies reporting on physiological l-carnitine levels in hypertensives are limited. Our aim was to determine physiological levels of l-carnitine and acylcarnitines in African and Caucasian men, and to investigate associations between ambulatory blood pressure (BP) and carnitine levels. Participants included 101 African and 101 Caucasian teachers. Ambulatory BP measurements were conducted, and l-carnitine and acylcarnitine levels determined. African men showed significantly higher systolic BP (p < 0.001), diastolic BP (p < 0.001) and l-carnitine levels (p = 0.01). In both ethnic groups, partial regression analyses revealed a positive association between BP and l-carnitine, although in Caucasians it was with systolic (r = 0.20, p = 0.045), and in Africans with diastolic BP (r = 0.23, p = 0.023). After adjusting for confounders, an independent positive association between systolic (R ² = 0.37, β = 0.12, p = 0.041) and diastolic BP (R ² = 0.39, β = 0.14, p = 0.018) and l-carnitine and long-chain acylcarnitines (R ² = 0.38, β = 0.17, p = 0.005 and R ² = 0.39, β = 0.15, p = 0.011) were found, independent of ethnicity. Physiological l-carnitine levels were not only higher in Africans than in Caucasians but also above the expected reference range. Despite promising results on l-carnitine (and its short-chain derivatives) in hypertension treatment regimens, our findings paradoxically show that elevated BP is significantly associated with higher physiological l-carnitine and long-chain acylcarnitine levels.     

l-Lactic acid biosensor based on multi-layered graphene

Pristine graphene platelets and graphene oxide were used as electrode modifiers, aiming the investigation of their electrochemical efficacy towards β-nicotinamide adenine dinucleotide (NADH). The electrochemical detection of NADH is one of the most studied areas of bioelectroanalysis because of the ubiquity of NAD(P)H-based enzymatic reactions in nature. Commercially available graphene and laboratory prepared graphene oxide were used to modify glassy carbon electrodes and the behaviour of such modified electrodes against potassium ferricyanide (III) and NADH was reported. Relying on the graphene-modified transducer, l-lactic dehydrogenase (l-LDH) was successfully immobilised in a 1 % Nafion^® membrane. The developed biosensor, working at +250 mV versus Ag/AgCl reference electrode, was used to assess l-lactic acid in four different types of yogurts, revealing an l-lactic acid concentration ranging between 0.3 and 0.6 %.     

Porous chitosan-based adhesive patch filled with poly(l-3,4-dihydroxyphenylalanine) as a transdermal drug-delivery system

Bioadhesives have been widely used on surgical areas for more than 50 years. Despite their numerous advantages, drawbacks such as cytotoxicity and low efficiency of transdermal drug delivery have limited their applications. Consequently, bioadhesives are mainly used during emergencies. To improve the physical properties of bioadhesive materials, poly(l-3,4-dihydroxyphenylalanine) or poly(l-DOPA) was synthesized and used to fill 2 kinds of porous chitosan patches (high and medium molecular weight). Bioaddisive and patch properties such as bond strength, drug-delivery efficiency, morphology, cytotoxicity, and histology were characterized. We ascertained that the optimal combination for high bond strength was 77.9 % polymethacrylic acid (PMA, molecular weight: 9,500 Da) and 22.1 % l-DOPA. Drug release was 1.5 times faster from the poly(l-DOPA)-filled chitosan patch of medium molecular weight than from the high molecular weight patch. Further, the medium molecular weight chitosan patch was more efficient at wound healing than commercial glue. These results indicate that chitosan-based materials filled with poly(l-DOPA) can be used as adhesive patches in various fields.     

The Role of Oxazolidinones in l-Proline-Assisted Aldol-Type Reactions

In this study, the formation of oxazolidinone intermediates along the reaction coordinates of two l-proline-catalyzed reactions was investigated using high-level quantum mechanical calculations. Our results suggest that the final product is produced via routes other than the currently-adopted catalytic cycle for l-proline, including routes where oxazolidinones are directly involved.     

Hydrogenation of l-Arabinose and d-Galactose Mixtures Over a Heterogeneous Ru/C Catalyst

Complete hydrogenation of d-galactose and l-arabinose mixtures on a Ru/C catalyst was achieved with excellent selectivities exceeding 95?%. No unexpected effects of temperature and pressure were observed. A detailed kinetic model was derived to describe the simultaneous hydrogenation of the monomeric sugars.     

l-Lysine-derived optically active poly(hydrazide-imide)s: synthesis, characterization and their application in removal of heavy metal ions

Six novel poly(hydrazide-imide)s (PHI _a–f ) were prepared from the reaction of a novel l-lysine-derived chiral diacid, ethyl l-lysine-N,N’-ditrimellitoyl diacide (1), with six synthetic dihydrazides by solution polycondensation. These polymers have inherent viscosities in the range of 0.22–0.45 dl g^?1, display optical activity, and are readily soluble in polar aprotic solvents. They start to decompose (T _10%) above 248 °C and display glass-transition temperatures at 164.37–210.20 °C. All the above polymers were fully characterized by UV, FT-IR, and ¹H NMR spectroscopy, TGA, DSC, inherent viscosity measurement and specific rotation.