Solid-phase extraction materials based on molecularly imprinted polymers for recognition of pyrethroids

A novel recognition material for detection of kinds of pyrethroids was successfully synthesized by molecular imprinting technology. 3-Phenoxybenzoic acid (PBA) usually could be the antigen to prepare the polyclonal antibody. In this work, the recognition material was prepared utilizing PBA as the template, methacrylicacid as the functional monomer and ethylene glycol dimethacrylate as the crosslinker. The recognition material was characterized by atomic force microscope, adsorption equilibrium and selectivity experiments. The results showed that the recognition material has been successfully prepared and recognized four pyrethroids (fenpropathrin, deltamethrin, fenvalerate, and cyhalothrin). The recognition material was utilized as sorbents in solid-phase extraction for separation and detection of pyrethroids in practically samples. Under the optimal conditions, the recoveries were ranging from 74.3 to 111.0%. Therefore, novel materials for pyrethroids are very promising for future applications. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48919.     

A molecularly imprinted polymer as artificial receptor for the detection of indole‐3‐carbinol

Molecularly imprinting polymer technology is used to prepare a molecularly imprinted polymer (MIP) for the selective recognition of indole‐3‐carbinol (I3C), a chemopreventive and chemotherapeutic phytochemical associated with the anticancer activities of cruciferous vegetables. Prepolymerization study via nuclear magnetic resonance technique is done to choose the best functional monomer that establishes more interaction with the template. The prepared MIP is tested before in batch experiments and subsequently used as solid‐phase extraction sorbent for the selective detection of I3C from standard solutions. In order to verify the selectivity of the MIP, the binding of structurally related compounds, such as indole‐3‐acetonitrile, teophylline, and tryptophan, on the polymer is investigated. The experiments indicate that the MIP is highly selective for I3C with an association constant of K_a = (1.37 ± 0.07) × 10³ M^?1. Standard mixture solution loaded on MIP‐SPE cartridge give a recovery of 95% for I3C, while the other compounds are totally eluted during washing step. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40819.     

Preparation of molecularly imprinted polymer coatings with the multiple bulk copolymerization method for solid‐phase microextraction

The multiple bulk copolymerization method, which was developed in our previous works, was further investigated with prometryn, tetracycline, and propranolol as templates for the preparation of molecularly imprinted polymer (MIP) coatings on silicon fibers for solid‐phase microextraction. The preparation conditions (e.g., the solvent, monomer, crosslinker, component proportions, polymerization time, and number of coating procedures) were investigated systemically in an effort to enhance the coating thickness, surface morphology, and reproducibility. The methodology was examined, and some common specialties were explored in the preparation of three MIP‐coated fibers. Even after the coating procedure was repeated 10 times, the prometryn, tetracycline, and propranolol MIP‐coated fibers were prepared reproducibly with coating‐thickness relative standard deviations of 2.6, 3.0, and 5.1%, respectively; they were highly homogeneous, and a compact morphological structure was obtained. The extraction capacities of prometryn, tetracycline, and propranolol with corresponding MIP‐coated fibers were approximately 10.4, 3.9, and 3.3 times as much as those with the nonimprinted polymer (NIP)‐coated fibers, respectively, and the selectivity factors of prometryn, tetracycline, and propranolol MIP coatings for the template molecules and structural analogues were 2.2–10.4, 2.2–3.9, and 1.3–3.3, respectively, in comparison with the corresponding NIP coatings. In comparison with commercial polydimethylsiloxane/divinylbenzene coatings that were approximately 3 times thicker, the extracted amounts of prometryn, tetracycline, and propranolol were 4.2, 12.3, and 7.7 times higher with prometryn, tetracycline, and propranolol MIP coatings, respectively. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and characterization of magnetic molecularly imprinted polymers for selective recognition of 3‐methylindole

In this work, magnetic molecularly imprinted polymers (MMIPs) were used as novel adsorbents for selective adsorption of 3‐methylindole from model oil. The MMIPs were synthesized by precipitation polymerization and surface molecularly imprinted technique, using Fe₃O₄ nanoparticles as magnetically susceptible component, methylacrylic acid as dressing agent and functional monomer, ethylene glycol dimethacrylate as crosslinker, and 3‐methylindole as template molecule. The MMIPs were characterized by Fourier‐transform infrared spectroscopy, scanning electron microscopy, vibrating sample magnetometer, and thermogravimetric analyzer, respectively. The adsorption performances of MMIPs were investigated by batch adsorption experiments in terms of kinetics, isotherms, and selective recognition adsorption, respectively. The results indicate that MMIPs have high recognition ability and fast binding kinetics for 3‐methylindole. Meanwhile, the adsorption equilibrium time was about 2 h and the equilibrium adsorption amount was ～38 mg g^?1 at 298 K. The heterogeneous MMIPs were modeled with pseudo‐second‐order and Langmuir isotherm equation. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2859–2866, 2013     

Using molecularly imprinted polymer for protecting functional group in organic reaction

In this study, a novel method of selective protecting group based on molecularly imprinted polymer for regioselective organic reaction is reported. The simplicity, convenience and feasibility of this method may be illustrated by the protection of hydroxyl group at C17 or C3 of β‐estradiol in the reaction between β‐estradiol and diphenylphosphinic chloride. Polymers to protect hydroxyl group at C17 or at C3, both demonstrated excellent protection effect. In polymers imprinted with 2‐methyl‐cyclopentanol template to protect hydroxyl group at C17, the proportion of 3‐phosphate was almost as high as 100%. In molecularly imprinted polymer synthesized using 5,6,7,8‐Tetrahydro‐2‐naphthol as a template to protect hydroxyl group at C3, the proportion of 17‐phosphate reached 98.2%. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Molecular imprinted solid‐phase extraction of huperzine A from Huperzia Serrata

On the basis of the non‐covalent interaction between template and monomer, porous molecularly imprinted polymers (MIPs) were synthesized by a thermal‐initiated polymerization method using huperzine A as template, acrylamide, or methacrylic acid as function monomer, ethylene glycol dimethacrylate as cross‐linking agent. The interaction between template and functional monomers was studied by UV spectrophotometry, which showed a formation of huperzine A‐monomer complexes with stoichiometric ratio of 1 : 2 in the pre‐polymerized systems. The resultant MIP particles were tested in the equilibrium binding experiment to analyze their adsorption ability to huperzine A, and were characterized by Fourier Transform Infrared (FTIR) study. The recognition properties of MIP were estimated in solid‐phase extraction by selecting four compounds (isolated from the Chinese herb Huperzia serrata) as substrates, and were compared with and prior to those of the NIP. High affinity and adsorption of MIP1 which was prepared in chloroform with huperzine A as imprinted molecule, and acrylamide (AM) as functional monomer, made an attractive application of MIP1 in separation processes. In final, using MIP1 solid‐phase extraction micro‐column, huperzine A was enriched and separated from the real extraction sample of Huperzia serrata. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Graphene‐based molecularly imprinted polymer for separation and pre‐concentration of trace polycyclic aromatic hydrocarbons in environmental water samples

A composite of reduced graphene oxide and pyrene‐imprinted polymer was synthesized and employed as a solid phase for extraction of five selected polycyclic aromatic hydrocarbons (PAHs) from water samples. Gas chromatography‐time of flight/mass spectrometry was employed in the analysis of the extracts. The composite was prepared by a free radical polymerization of methacrylic acid and 4‐vinylpyridine as monomers and ethylene glycol dimethacrylate as a crosslinker. The adsorption studies were carried out through batch binding studies. The binding capacity for the imprinted and non‐imprinted composite was 101.83 and 68.21 µg g^?1, respectively. The adsorption followed the pseudo 2nd order and well fitted the Langmuir isotherm. Mean recoveries ranging from 73% to 105.4% for both spiked deionized water and environmental water samples were obtained when the imprinted composites were employed in solid phase extraction of the PAHs. The composites could be re‐used for five times without a significant loss in recoveries. The proposed method was employed for the analysis of spiked environmental water samples and did not show significant changes in the recoveries showing there were no matrix interferences. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45300.     

One‐pot method for obtaining hydrophilic tetracycline‐imprinted particles via precipitation polymerization in ethanol

In this study, we used a green, one‐pot method to synthesize hydrophilic molecularly imprinted polymers (MIPs) via the precipitation polymerization of hydrophilic monomers in ethanol. The as‐prepared materials were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, dynamic light scattering, and water contact angle measurements (27.3 ± 0.1°). As compared to the imprinting and nonimprinting processes, tetracycline (TC), as a template molecule, had an important effect on the morphology of the MIPs, and the possible mechanism is discussed in detail. We also discuss the effects of the parameters on the binding performance as determined by batch adsorption experiments in pure water. The adsorption capacity increased with increasing concentration and temperature at an optimum pH of 5.0. The Langmuir isotherm fitted the data better, with a maximal concentration of 45.75 μmol/g at 318 K. The kinetic properties of the MIPs (within 3.0 h) toward TC were analyzed with pseudo‐first‐order and pseudo‐second‐order kinetic equations and the intraparticle diffusion model. The MIPs exhibited specific recognition toward TC, and other competitive antibiotics were used as references. All of the results indicate that the MIPs exhibited a large adsorption capacity and great specific recognition for TC. The high affinity to TC of the MIPs, with its fast and easy fabrication, provides them with potential applications in the selective separation of the TC antibiotics from an aqueous environment. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40071.     

Fabrication of ordered microporous styrene‐acrylonitrile copolymer blend imprinted membranes for selective adsorption of phenol from salicylic acid using breath figure method

Highly selective, ordered microporous molecularly imprinted membranes (MIMs) for phenol were synthesized by breath figure (BF) method using styrene‐acrylonitrile copolymer (SAN) as the membrane matrix and molecularly imprinted polymer nanoparticles (nano‐MIPs) as the imprinted nanoparticles. The nano‐MIPs were synthesized by oil‐in‐water emulsion polymerization using 4‐vinyl pyridine (4‐VP), methyl methacrylate (MMA) or cinnamic acid (CA) as the functional monomer, respectively. The prepared nano‐MIPs were characterized by transmission electron microscope (TEM) and Raman, whereas MIMs were characterized by SEM, membrane flux, and selective adsorption experiments. Morphological analysis exhibited that the addition of nano‐MIPs improved the formation of ordered and well‐defined porous membrane morphology. Compared with MMA‐MIM and CA‐MIM, the 4‐VP‐MIM exhibited higher membrane flux, adsorption capacity, and stronger selective binding for phenol as well as excellent permeation selectivity for phenol. Moreover, the selective effect of 4‐VP‐MIM on phenol was strongly affected by the amount of 4‐VP imprinted nanoparticles (nano‐4‐VP‐MIPs). The experimental data revealed that the 4‐VP‐MIM containing 2.0 wt % of nano‐4‐VP‐MIPs exhibited the highest separation selectivity for the template phenol, whose selectivity coefficients for phenol relative to salicylic acid (SA) and p‐hydroxybenzoic acid (p‐HB) were 5.6770 and 5.5433, respectively, which was close to the predicted selectivity coefficient value. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42350.     

Surface molecularly imprinted polymers based on yeast prepared by atom transfer radical emulsion polymerization for selective recognition of ciprofloxacin from aqueous medium

To achieve selective recognition of water‐soluble ciprofloxacin (CIP), an effective method was developed for the preparation of surface molecularly imprinted polymers based on the yeast particles (yeast@MIPs) via atom transfer radical emulsion polymerization (ATREP). The reactions were carried out in the nontoxic and green emulsion system at room temperature, which was environment friendly with low energy consumption. In this study, the yeast, for the advantages of low cost, easily available source and abundant active groups on the cell wall, was selected as an ideal biological support substrate. The prepared yeast@MIPs was characterized by FT‐IR, SEM, TEM, EDS, and elemental analysis techniques. Batch mode adsorption studies were carried out to investigate the specific adsorption equilibrium, kinetics, selective recognition, and reuse ability of yeast@MIPs. The experimental static adsorption data of CIP on to yeast@MIPs were well‐described by Langmuir, Freundlich, and pseudo‐second‐order models. The maximum static adsorption capacity for CIP of yeast@MIPs was 18.48 mg g^?1, and the adsorption equilibrium could be reached in 60 min. The selectivity coefficients for CIP relative to enrofloxacin, tetracycline, and sulfadiazine were 1.212, 2.002, and 10.65, which demonstrated CIP of high affinity and selectivity over three competitive antibiotics. In addition, the reusability of the material without obvious deterioration (8.52% loss) in performance was observed at least four repeated cycles. And the yeast@MIPs was used to determine CIP from spiked shrimp samples by HPLC analysis. These results showed that yeast was a well‐defined substrate and ATREP was a promising technique for the preparation of surface molecularly imprinted polymers targeting templates. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40310.     

Selective solid‐phase extraction of metal for water decontamination

Metal‐contaminated industrial effluent is a major concern for human health. Therefore, the removal of metal is of primary importance. In this study, metals were selectively extracted from water. Selective metal recovery was studied with a crown‐ether‐based polymer, wherein the selectivity was observed for strontium over lead. Parameters influencing the metal recovery, such as the contact time, adsorbent dosage, and metal‐ion concentration, were evaluated. Interestingly, the adsorption rate of strontium was exponentially increased for the initial 4 h, and lead was adsorbed exponentially after 6 h. Notably, 98% strontium adsorption and 64% lead adsorption were obtained in 24 h. The Langmuir adsorption isotherm was in good agreement and demonstrated that the reactive sites of the adsorbent were homogeneous with monolayer metal adsorption with an adsorbent. The Freundlich adsorption isotherm was not obeyed by both metals. The pseudo‐first‐order and pseudo‐second‐order kinetics indicated that strontium was adsorbed by chemisorption and lead was adsorbed by physisorption. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 132, 42849.     

Molecular‐imprinted nylon membranes for the permselective binding of phenylalanine as optical‐resolution membrane adsorbents

Nylon 6, nylon 6,6, and terephthalic phenylene polyamide (TPPP) were functionalized by phase‐inversion molecular imprinting to add L ‐phenylalanine recognition ability. Formic acid containing 20 wt % nylon and 8 wt % L ‐phenylalanine was used as the solvent for the cast solution of the imprinting process. The resultant porous membranes behaved as membrane adsorbents that separated the L /D mixture of the substrate. The imprinted nylon 6 and nylon 6,6 presented high selectivity to the L ‐form substrate with respect to the TPPP membranes, but the imprinted TPPP membranes showed higher binding capacity with 0.57 μmol/g for L ‐phenylalanine. The apparent partition coefficients of L ‐ and D ‐forms by the imprinted membranes were 6.8, 4.2, and 1.7 for nylon 6, nylon 6,6, and TPPP, respectively. The separation manner of the L ‐ and D ‐forms from the mixture was also confirmed by membrane filtration under 1.5 kgf/cm² of applied pressure. The imprinted nylon 6, nylon 6,6, and TPPP membranes had separation factors of L ‐ and D ‐phenylalanines of 1.1, 1.1, and 1.2, respectively. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 620–626, 2005     

Bio‐inspired synthesis of molecularly imprinted nanocomposite membrane for selective recognition and separation of artemisinin

Inspired from the highly bioadhesive performance of mussel protein, a simple, yet efficient synthetic method for efficiently imprinting of Artemisinin (Ars) was developed to prepare the bio‐inspired molecularly imprinted membranes (MIMs) via atom transfer radical polymerization (ATRP). In this work, attributed to the unique properties of polydopamine (pDA) modified layers and ATRP technology, the uniform recognition sites for efficiently selective extraction of the Ars with high stability could be obtained on the MIMs surfaces. In addition, the maximum adsorption capacity of the MIMs is 158.85 mg g^?1 by the Langmuir isotherm model, which is remarkable higher than NIMs. Additionally, because of the formation of the uniform specific recognition cavities on membrane surfaces, the as‐prepared MIMs exhibited a rapid adsorption dynamics and well‐fitted for the pseudo‐second‐order rate equation, also, possessed an excellent per‐selectivity performance (β_{artemether/Ars} values is 0.18) of template molecule, which clearly demonstrated the potential value of this method in the selective separation and purification of Ars. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43405.     

Designing and preparing of quercetin surface‐imprinted material and its molecular recognition characteristics

Quercetin is an important compound of flavonoids. In this work, quercetin molecule surface‐imprinted material with high performance was prepared using a novel surface‐imprinting technique of “synchronously graft‐polymerizing and imprinting.” The modified micron‐sized silica gel particles containing amino groups were used as matrix, methacrylic acid (MAA) was used as functional monomer, and N,N′‐Methylenebisacrylamide (MBA) was used as crosslinker. In dimethyl formamide solution of quercetin, MAA molecules arranged automatically around the template quercetin molecule by right of hydrogen bonding interactions of two type, ordinary hydrogen bond and π‐type hydrogen bond. By initiating the surface‐initiating system of – , the graft/cross‐linking polymerization of MAA on SiO₂ particles and the quercetin molecule surface‐imprinting were simultaneously carried out, forming quercetin molecule surface‐imprinted material MIP‐PMAA/SiO₂. With another two flavonoids, rutin and genistein, as contrasting substances, the molecule recognition character of the quercetin molecule surface‐imprinted material MIP‐PMAA/SiO₂ was investigated with batch and column methods. The experimental results show that the imprinted material MIP‐PMAA/SiO₂ possesses special recognition selectivity and excellent binding affinity for quercetin molecule. The binding capacity of MIP‐PMAA/SiO₂ for quercetin is 0.325 mmol/g, and its selectivity coefficients for quercetin relative to rutin and genistein are 7.69 and 4.40, respectively. The main conditions of imprinting process affect the property of MIP‐PMAA/SiO₂ greatly, and the optimal molar ratio of monomer MAA to crosslinker MBA is 7 : 1 and appropriate molar ratio of monomer MAA to template quercetin is equal to 6 : 1. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41112.     

Magnetic molecularly imprinted polymer nanoparticles coupled with high performance liquid chromatography for solid‐phase extraction of carvedilol in serum samples

Herein, we report a magnetic molecularly imprinted polymers (m‐MIPs) using Fe₃O₄ as a magnetic component, carvedilol as a template molecule for the solid‐phase extraction (MISPE) as the sample clean‐up technique combined with high‐performance liquid chromatography (HPLC) and for the controlled release of carvedilol at different pH values of 1.0 (simulated gastric fluid), 6.8 (simulated intestinal fluid), and 7.4 (simulated biological fluid). The adsorption kinetics was modeled with the pseudo‐first‐order and pseudo‐second‐order kinetics, and the adsorption isotherms were fitted with Langmuir and Freundlich models. The performance of the m‐MIPs for the controlled release of carvedilol was assessed and results indicated that the magnetic MIPs also have potential applications in controlled drug release. Furthermore, the m‐MIPs were applied to the extraction of carvedilol from human blood plasma samples. Carvedilol can be quantified by this method in the 2–350 μg L^?1 concentration range. The limit of detection and limit of quantification in plasma samples are 0.13 and 0.45 μg L^?1. The results from HPLC showed good precision (3.5% for 50.0 μg L^?1) and recoveries (between 85 and 93) using m‐MIP from human plasma samples. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41209.     

Preparation and application of tectoridin‐imprinted magnetite nanoparticles

In this work, the tectoridin‐imprinted magnetite nanoparticles (TIMNPs) were firstly prepared by using tectoridin as template molecule, methacrylic acid as functional monomer, styrene as crosslinking agent, and superparamagnetic Fe₃O₄ particles as magnetic component. TIMNPs with a size of about 161 nm were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), Fourier transform infrared (FT‐IR), X‐ray diffraction (XRD), vibrating sample magnetometer (VSM), and thermogravimetric analysis (TGA). Rebinding experiments were carried out to determine the specific binding properties and adsorption selectivity. The maximum number of binding sites was 69.58 μmol/g and there was only one kind of binding sites existed in TIMNPs. The relative separation factors for tectoridin with its analogues such as baicalin and atenolol were 2.63 and 2.66, respectively. The results indicated that the synthesized TIMNPs had excellent saturation magnetization, binding capacity, and absorption selectivity. TIMNPs could be one of the most promising candidates for tectoridin extraction. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43806.     

Molecularly imprinted polymer membranes for substance‐selective solid‐phase extraction from aqueous solutions

Thin‐layer molecularly imprinted polymer (MIP) composite membranes for selective binding of monocrotophos (MCP) pesticide from aqueous solutions were developed. The procedure was based on commercially available membrane modules that were rinsed with prepolymerization imprinting mixtures. After the in situ polymerization and generation of MIP films on the membranes within the modules, the membranes were evaluated in terms of affinity toward the target molecule MCP. MIP membranes with different porogens and different monomers on Nylon‐6 membranes were prepared. It was shown that MIP membranes synthesized with methacrylic acid as monomer and toluene as porogens on the Nylon‐6 membranes provided a highly selective binding of MCP from aqueous solutions under the optimized elution conditions. With the novel surface modification technique, the low nonspecific binding properties of the microfiltration membrane could successfully be combined with the receptor properties of molecular imprints, yielding substance‐specific MIP composite membranes. The high affinity of these synthetic membranes to MCP pesticide together with their straightforward and inexpensive preparation could be applied in a fast preconcertration step, solid‐phase extraction, by a simple microfitration for the determination of MCP in water. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4468–4473, 2006     

Side chain functionality dominated the chromatography of N‐protected amino acid on molecularly imprinted polymer

Molecularly imprinted polymer (MIP) with N^α‐protected amino acid as the print molecule was prepared and used as the stationary phase for the chromatographic study of molecular recognition. Particles of MIP were prepared by photopolymerization of 4‐vinylpyridine in the presence of tert‐butyloxycarbonyl‐L ‐tyrosine (Boc‐L ‐Tyr) and packed into a column for the chromatographic resolution of Boc‐L ‐Tyr and tert‐butyloxycarbonyl‐L ‐phenylalanine (Boc‐L ‐Phe). These two N^α‐protected amino acids that differ from each other in the side chain with one hydroxyl group on the benzene ring could be well separated on the MIP. A separation factor of about two was achieved by using a mixture of acetonitrile (99.5 v/v %) and acetic acid (0.5 v/v %) as the mobile phase. Results suggest that the interaction between hydroxyl group in the side chain of amino acid and pyridine in the polymer dominated the selective adsorption of print molecule on the MIP. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Preparation and characteristics of a dummy molecularly imprinted polymer for phenol

A dummy molecularly imprinted polymers (DMIP) for phenol was synthesized by a thermal polymerization method with acrylamide as the functional monomer, ethylene dimethacrylate as the crosslinker, 2,2‐azobisisobutyronitrile as the free‐radical initiator, acetonitrile as the porogenic solvent, and sulfadiazine, a phenol analogue, as the template. In comparison to other adsorbents, the synthesized DMIP showed a higher capacity and rate of adsorption. The adsorption amount of the DMIP adsorbents for phenol reached 6.09 ± 0.15 mg/g, and the adsorption rate of the DMIP was about 0.406 ± 0.01 mg g^?1·min^?1. The results indicate that the Freundlich model fit the adsorption model of DMIP for phenol. The adsorption model of DMIP for phenol was multilayer adsorption. This showed that the DMIP synthesized by bulk polymerization could be used as a novel adsorbent for the removal of phenol from contaminated water. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Water‐compatible imprinted polymers based on CS@SiO2 particles for selective recognition of naringin

Molecularly imprinted polymers are being proposed for the development of novel biorecognition elements for active components. In this study, an imprinted chitosan coated silica nanoparticles (I‐CS@SiO₂) polymer was prepared by a simple procedure, in which, naringin (NG) with antioxidant activity, acted as a template, silica as a matrix and CS as a functional polymer. The binding properties were discussed by the equilibrium binding experiment method. Experiments show that the adsorption characteristics of I‐CS@SiO₂ are better than that of nonimprinted polymer. It exhibited high selectivity for NG when compared with the nonimprinted polymer, with an imprinting factor α of 1.74. Scatchard analysis of the I‐CS@SiO₂ indicated that there was a class of binding sites during the I‐CS@SiO₂ recognizing NG: The dissociation constant of K_D is 0.016 mmol L^?1, the maximum apparent binding capacity of B_max is 6.56 μmol g^?1. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40491.