Poly[(N‐isopropylacrylamide)‐co‐(itaconic acid)] hydrogels with poly(ethylene glycol)

The aim of the work reported here was to investigate temperature‐ and pH‐sensitive hydrogels of N‐isopropylacrylamide (NIPAM) and itaconic acid (IA) and their semi‐interpenetrating polymer networks (semi‐IPNs) with varying contents of poly(ethylene glycol) (PEG). The stimuli responsiveness, swelling behaviour and mechanical properties of the hydrogels and semi‐IPNs were studied in order to investigate the effect of various amounts of PEG. Pulsed‐gradient spin‐echo NMR experiments were carried out to investigate the diffusion process. The pH sensitivity increased with an increasing amount of PEG in the semi‐IPNs, while the overall rate of water uptake was diffusion‐controlled (n < 0.5). For certain PEG contents (5 and 10 wt%), the semi‐IPNs exhibited better mechanical properties than the poly(NIPAM‐co‐IA) copolymer. The calculated values of the self‐diffusion coefficients of water indicated facilitated diffusion of water through the system with increased amounts of PEG, while the self‐diffusion coefficients of a model compound, metoprolol tartrate, showed no significant dependence on the amount of PEG. According to the results obtained and compared to results reported in the literature, the investigated semi‐IPNs may have potential applications in the controlled release of macromolecular active agents such as proteins and peptides. Copyright © 2009 Society of Chemical Industry     

Blood protein adsorption onto macroporous semi‐interpenetrating polymer networks (IPNs) of poly(ethylene glycol) (PEG) and poly(2‐hydroxyethyl methacrylate) (PHEMA) and assessment of in vitro blood compatibility

This work reports a study of the adsorption of fibrinogen (Fgn) onto the surface of semi‐interpenetrating polymer networks (IPNs) of poly(ethylene glycol) (PEG) and poly(2‐hydroxyethyl methacrylate) (PHEMA). The semi‐IPNs were prepared by polymerizing 2‐hydroxyethyl methacrylate with a redox system and in the presence of PEG and crosslinker ethyleneglycol dimethacrylate. The proposed spongy IPNs were characterized by Fourier transform infrared and environmental scanning electron microscopy methods, and network structural parameters, such as molecular weight between crosslinks and crosslink density, were calculated using swelling measurements. The adsorption of Fgn was carried out onto the spongy IPNs and kinetic constants of the adsorption process as well as isotherm constants were evaluated. The adsorption process was also studied under varying pH, ionic strengths, and chemical architecture of the IPNs. The anti‐thrombogenic behaviour of the polymer matrices was judged using in vitro tests. Copyright © 2006 Society of Chemical Industry     

Thermal and pH dual‐responsive hydrogels based on semi‐interpenetrating network of poly(N‐isopropylacrylamide) and collagen nanofibrils

Hydrogels with environment‐sensitive properties have great potential applications in the controlled drug release field. In this paper, hybrid hydrogels with semi‐interpenetrating polymer networks (semi‐IPNs), composed of poly(N‐isopropylacrylamide) (PNIPAM) as the thermo‐sensitive component by in situ polymerization and self‐assembled collagen nanofibrils as the pH‐sensitive framework, were prepared for controlled release of methyl violet as a model drug. From Fourier transform infrared spectroscopy and scanning electron microscopy, it was indicated that the crosslinking of PNIPAM in the presence of collagen nanofibrils led to the formation of semi‐IPNs with homogeneous porous structure, and the semi‐IPNs showed improved thermal stability and elastic properties compared with the native collagen as determined using differential scanning calorimetry and rheologic measurements. Furthermore, the semi‐IPNs possessed swelling behaviors quite different from those of neat collagen or PNIPAM hydrogel under various pH values and temperatures. Correspondingly, as expected, the drug release behavior in vitro for semi‐IPNs performed variously compared with that for single‐component semi‐IPNs, which revealed the tunable performance of semi‐IPNs for release ability. Finally the thermo‐ and pH‐responsive mechanism of the semi‐IPNs was illuminated to provide guidance for the application of the thermo‐ and pH‐sensitive collagen‐based hybrid hydrogels in controlled drug delivery systems. © 2019 Society of Chemical Industry     

Swelling and diffusion characteristics of novel semi‐interpenetrating network hydrogels composed of poly[(acrylamide)‐ co‐(sodium acrylate)] and poly[(vinylsulfonic acid), sodium salt]

A series of novel semi‐interpenetrating polymer networks (IPNs) composed of poly[(acrylamide)‐co‐(sodium acrylate)] with varying amounts (5, 10, and 15 wt%) of poly[(vinylsulfonic acid), sodium salt] was synthesized. The semi‐IPN hydrogels were characterized by infrared spectroscopy. The swelling behavior of these IPNs was studied in distilled water/physiological solutions/buffer solutions/salt solutions. As the amount of poly[(vinylsulfonic acid), sodium salt] increased in the network, the swelling capacity of the semi‐IPNs increased considerably. The swelling and diffusion characteristics such as water penetration velocity (v), diffusion exponent (n), and diffusion coefficient (D) were calculated in distilled water, as well as in other physiological solutions. The highest swelling capacity was noted in urea and glucose solutions. The semi‐IPN hydrogels followed non‐Fickian diffusion behavior in water and physiological fluids, whereas Fickian behavior was observed in buffer solutions. The stimuli‐responsive characteristics towards physiological fluids, salt concentration, and temperature of these semi‐IPN hydrogels were also investigated. The swelling behavior of the semi‐IPNs decreased markedly with an increase of the concentration of the salt solutions. Copyright © 2006 Society of Chemical Industry     

Semi‐interpenetrating polymer networks based on polyurethane and polyvinylpyrrolidone. II. Dielectric relaxation and thermal behaviour

Semi‐interpenetrating polymer networks (semi‐IPNs) based on crosslinked polyurethane (PU) and linear polyvinylpyrrolidone (PVP) were synthezised, and their thermal and dynamic mechanical properties and dielectric relaxation behavior were studied to provide insight into their structure, especially according to their composition. The differential scanning calorimetry results showed the glass transitions of the pure components: one glass‐transition temperature (T_g) for PU and two transitions for PVP. Such glass transitions were also present in the semi‐IPNs, whatever their composition. The viscoelastic properties of the semi‐IPNs reflected their thermal behavior; it was shown that the semi‐IPNs presented three distinct dynamic mechanical relaxations related to these three T_g values. Although the temperature position of the PU maximum tan δ of the α‐relaxation was invariable, on the contrary the situation for the two maxima observed for PVP was more complex. Only the maximum of the highest temperature relaxation was shifted to lower temperatures with decreasing PVP content in the semi‐IPNs. In this study, we investigated the molecular mobility of the IPNs by means of dielectric relaxation spectroscopy; six relaxation processes were observed and indexed according the increase in the temperature range: the secondary β‐relaxations related to PU and PVP chains, an α‐relaxation due to the glass–rubber transition of the PU component, two α‐relaxations associated to the glass–rubber transitions of the PVP material, and an ionic conductivity relaxation due to the space charge polarization of PU. The temperature position of the α‐relaxation of PU was invariable in semi‐IPNs, as observed dynamic mechanical analysis measurements. However, the upper α‐relaxation process of PVP shifted to higher temperatures with increasing PVP content in the semi‐IPNs. We concluded that the investigated semi‐IPNs were two‐phase systems with incomplete phase separation and that the content of PVP in the IPNs governed the structure and corresponding properties of such systems through physical interactions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1191–1201, 2003     

Curing and mechanical properties of dicyanate/poly(ether sulfone) semi‐interpenetrating polymer networks

Semi‐interpenetrating polymer networks (semi‐IPNs) composed of a dicyanate resin and a poly(ether sulfone) (PES) were prepared, and their curing behavior and mechanical properties were investigated. The curing behavior of the dicyanate/PES semi‐IPN systems catalyzed by an organic metal salt was analyzed. Differential scanning calorimetry was used to study the curing behavior of the semi‐IPN systems. The curing rate of the semi‐IPN systems decreased as the PES content increased. An autocatalytic reaction mechanism was used to analyze the curing reaction of the semi‐IPN systems. The glass‐transition temperature of the semi‐IPNs decreased with increasing PES content. The thermal decomposition behavior of the semi‐IPNs was investigated. The morphology of the semi‐IPNs was investigated with scanning electron microscopy. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1079–1084, 2003     

A study on water and dye sorption capacities of novel ternary acrylamide/sodium acrylate/PEG semi IPN hydrogels

Here, a novel ternary semi interpenetrating polymer networks (semi IPNs) have been synthesized. An effective role to develop mechanically strong polymeric materials has been through the preparation of interpenetrating polymer networks (IPNs). The highly swelling superabsorbent semi IPNs were prepared by introducing poly(ethylene glycol), (PEG) into an acrylamide/sodium acrylate, (AAm/SA) hydrogels. For swelling characterization, swelling experiments were performed in water at 25 °C, gravimetrically. Water uptake and dye sorption properties of AAm/SA hydrogels and AAm/SA/PEG semi IPNs were investigated as a function of chemical composition of the hydrogels. AAm/SA hydrogels and AAm/SA/PEG semi IPNs were used in experiments on sorption of water-soluble cationic dye such as “Janus Green B” (JGB). For sorption of JGB into AAm/SA hydrogels and AAm/SA/PEG semi IPNs were studied by batch sorption technique at 25 °C. For the analysis of sorption mechanism and for calculation of some binding parameters of JGB from aqueous solutions, some linearization methods such as Klotz, Scatchard, and Langmuir linearization methods have been used.     

Thermal characterizations of semi‐interpenetrating polymer networks composed of poly(ethylene oxide) and poly(N‐isopropylacrylamide)

Poly(N‐isopropylacrylamide) (PNIPAAm)/poly(ethylene oxide) (PEO) semi‐interpenetrating polymer networks (semi‐IPNs) synthesized by radical polymerization of N‐isopropylacrylamide (NIPAAm) in the presence of PEO. The thermal characterizations of the semi‐IPNs were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dielectric analysis (DEA). The melting temperature (T_m) of semi‐IPNs appeared at around 60°C using DSC. DEA was employed to ascertain the glass transition temperature (T_g) and determine the activation energy (E_a) of semi‐IPNs. From the results of DEA, semi‐IPNs exhibited one T_g indicating the presence of phase separation in the semi‐IPN, and T_gs of semi‐IPNs were observed with increasing PNIPAAm content. The thermal decomposition of semi‐IPNa was investigated using TGA and appeared at around 370°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3922–3927, 2003     

Rheological properties of poly(ethylene glycol)/poly(N‐isopropylacrylamide‐co‐2‐acrylamido‐2‐methylpropanesulphonic acid) semi‐interpenetrating networks

For the increasing demands of multifunctional materials in applications such as drug delivery system, a pH‐ and temperature‐responsive polyelectrolyte copolymer gel system was studied using rheometry. Rheological properties, determined by plate–plate rheometry in oscillatory shear, of hydrogels formed by free radical initiated copolymerization of N‐isopropylacrylamide (NIPA) and 2‐acrylamido‐2‐methylpropanesulphonic acid (AMPS) in the presence of methylene bisacrylamide (MBAA) as crosslinker are compared with the properties of semi‐interpenetrating network (SIPN) polyelectrolyte gels made by incorporation of poly(ethylene glycol) with molar mass 6000 g mol^?1 (PEG6000). Based on our systematic studies for this PEG/SIPN system, the effects of initiator and crosslinker concentration, relative proportions of comonomer units in the main chains, PEG6000 content and temperature on viscoelastic properties, unusual high storage moduli at small strain for the SIPN were discussed. The SIPN gel with characteristics of PEG molecules as well as pH and temperature responsiveness from AMPS and NIPA units has potential application in drug delivery system design. Ice‐like rheological behavior of the PEG/AMPS‐NIPA SIPN gels at low temperature was first time reported and water remains homogeneous without phase separation in PEG/AMPS‐NIPA SIPN hydrogels at low temperature may be considered as an ideal candidate for water storage material. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Temperature‐ and pH‐sensitive IPNs grafted onto polyurethane by gamma radiation for antimicrobial drug‐eluting insertable devices

Temperature‐ and pH‐sensitive interpenetrating polymer networks (IPNs) and semi‐interpenetrating polymer networks (s‐IPNs) were γ‐ray grafted onto polyurethane (Tecoflex^®; TFX) to obtain vancomycin‐eluting implantable medical devices with minimized risk of infections. N‐isopropylacrylamide (NIPAAm) was grafted onto TFX catheters and films via a preirradiation oxidative method (method P) or via a direct method (method D). The PNIPAAm network facilitated acrylic acid (AAc) inclusion and subsequent polymerization/crosslinking, under specific reaction conditions. IPNs and s‐IPNs systems were characterized regarding the amount of grafted polymers, surface properties (FTIR‐ATR, ESEM, EDX), thermal behavior (DSC), and their temperature‐ and pH‐responsiveness. Loading and release of vancomycin for preventing in vitro growth of Staphylococcus aureus were also evaluated. Antimicrobial activity tests and hemo‐ (hemolysis, protein adsorption, thrombogenicity) and cyto‐compatibility (cell viability and production of cytokines and NO) assays indicated that the modification of TFX by γ‐radiation may improve the performance of polyurethanes for biomedical applications. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39992.     

Preparation and properties of catalyzed polyimide/dicyanate semi‐interpenetrating networks for polymer gas membrane with suppressed CO2‐plasticization

The work presents an approach to reduce the plasticization of polymeric membranes caused by condensable gases, and particularly the effect of plasticization caused on polyimides by CO₂ at high pressure. A technical polyimide, Matrimid^®, was chosen as a reference of polyimide membrane and the approach applied consisted of incorporating reactive oligomers to have cross‐linkable mixed systems, which do not plasticize at high CO₂ pressure. Films of semi‐interpenetrating networks (semi‐IPNs) based on Matrimid^® and phenolphthalein dicyanate as cross‐linking monomer in ratios 90/10, 80/20, and 70/30, were prepared using a catalyst to lower the curing temperature from 280 to 180°C. Semi‐IPNs properties such as thermal stability, mechanical properties, glass transition temperatures, or density were measured to characterize the films and were correlated with the dicyanate monomer content. The CO₂ gas permeation behavior of the three semi‐IPNs was studied using a CO₂ feed pressure ranging from 1 to 30 atm. The gas separation properties were mainly explained attending to the density of the films, which depended on the dicyanate content used. In the three catalyzed semi‐IPNs, the CO₂ permeability coefficients remained almost constant all along the investigated range of CO₂ pressure while Matrimid^® treated at 180°C did show a clear tendency to plasticization over a critical feed pressure of about 17 bar. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation and antidehydration of interpenetrating polymer network hydrogels based on 2‐hydroxyethyl methacrylate and N‐vinyl‐2‐pyrrolidone

This work reports the preparation of 2‐hydroxyethyl methacrylate (HEMA)/N‐vinyl‐2‐pyrrolidone (NVP) interpenetrating polymer network (IPN) hydrogels by UV‐initiated polymerization in the presence of free radical photoinitiator Darocur 1173 and cationic photoinitiator 4,4′‐dimethyl diphenyl iodonium hexafluorophosphate. The polymerization mechanism was investigated by the formation of gel network. The structure and morphology of the HEMA/NVP IPN hydrogels were characterized by fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM). The results showed that the IPN gels exhibited homogeneous morphology. The dehydration rates of HEMA/NVP IPN hydrogels were examined by the gravimetric method. The results revealed that the hydrogels had a significant improvement of antidehydration ability in comparison with poly(2‐hydroxyethyl methacrylate)(PHEMA) hydrogel embedded physically with poly(N‐vinyl‐2‐pyrrolidone)(PVP). © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Cure kinetics and physical properties of dicyanate/polyetherimide semi‐IPNs

The curing behavior and physical properties of dicyanate/polyetherimide (PEI) semi‐interpenetrating polymer network (IPN) systems were investigated. Differential scanning calorimetry (DSC) was used to study the curing behavior of the dicyanate/PEI semi‐IPN systems. The curing rate of the semi‐IPN system decreased as the PEI content increased. An autocatalytic reaction mechanism can describe well the curing kinetics of the semi‐IPN systems. The reaction kinetic parameters were determined by fitting DSC conversion data to the kinetic equation. The glass transition temperature of the semi‐IPNs decreased with increasing PEI content. Two glass transitions due to phase‐separated morphology were observed for the semi‐IPN containing over 15 phr (parts per hundred parts of dicyanate resin) PEI. The thermal stability and dynamic mechanical properties of the semi‐IPNs were measured by thermal analysis.     

Engineering properties of poly(vinyl chloride)–poly(butyl methacrylate) semi‐1 and semi‐2 interpenetrating polymer networks

Semi‐1 and semi‐2 interpenetrating polymer networks (IPNs) of poly(vinyl chloride) (PVC) and in situ formed poly(butyl methacrylate) (PBMA) have been synthesized using diallyl phthalate and ethylene glycol dimethacrylate as the crosslinkers of PVC and PBMA, respectively. These were then characterized with reference to their mechanical, thermal, and morphological properties. The mechanical and thermal characteristics revealed modification over the unmodified polymeric systems in relation to their phase morphologies. The semi‐1 IPNs displayed a decrease in their mechanical parameters of modulus and UTS while semi‐2 IPNs exhibited a marginal increase in these two values. The semi‐1 IPNs, however, also revealed a decrease in the elongation and toughness values away from the normal behavior. The thermomechanical behavior of both the systems is in conformity with their mechanicals in displaying the softening characteristics of the system and stabilization over unmodified PVC. The DSC thermograms are also correlated to these observations along with the heterogeneous phase morphology which is displayed by both the systems especially at higher concentration of PBMA incorporation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Radiation synthesis and environmental responsiveness of semi‐interpenetrating polymer networks composed of poly(dimethyl–aminoethyl methacrylate) and poly(ethylene oxide)

Semi‐interpenetrating polymer networks (semi‐IPNs) composed of poly(dimethyl–aminoethyl methacrylate) (PDMAEMA) and poly(ethylene oxide) (PEO) were synthesized by γ‐radiation; three semi‐IPNs with 80 : 20, 90 : 10, and 95 : 5 weight ratios of DMAEMA/PEO were obtained by use of this technique. The gel–dose curves showed that the hydrogels were characterized by a structure typical of semi‐IPNs and the results of elemental analysis supported this point. The temperature‐induced phase transition of semi‐IPNs with the composition of 95 : 5 was still retained, with the lower critical solution temperature of PDMAEMA shifting from 40 to 27°C. The temperature sensitivity of the other two semi‐IPNs gradually disappeared. The pH sensitivity of three semi‐IPNs was still retained but the pH shifted slightly to lower values with increasing PEO content in the semi‐IPNs. The effect of PEO content in semi‐IPNs on their environmental responsiveness was discussed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2995–3001, 2004     

The swelling behaviors and network parameters of cationic starch‐g‐acrylic acid/poly(dimethyldiallylammonium chloride) semi‐interpenetrating polymer networks hydrogels

Amphiphilic semi‐interpenetrating polymer networks (semi‐IPN) hydrogels were prepared by a sequential‐IPN method by acrylic acid graft copolymerization into cationic starch in mild aqueous media of poly(dimethyldiallylammonium chloride). Some main factors were investigated to evaluate the swelling of hydrogels, and the network parameters M_c were given accordingly to elaborate the interaction between polymers. The chemical structure of the resulting hydrogel was confirmed using Fourier transform infrared spectroscopy. The cationic starch‐based semi‐IPN hydrogels achieved a high swelling capacity of 1070 g/g in deionized water and 94 g/g in 0.9 wt % NaCl solution, respectively) and high compressive stress in a high water content. Besides, a different pH‐dependent behavior was found for this semi‐IPN hydrogel. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Swelling kinetics,mechanical properties,and release characteristics of chitosan‐based semi‐IPN hydrogels

Two series of pH‐sensitive semi‐interpenetrating network hydrogels (semi‐IPN) based on chitosan (CS) natural polymer and acrylamide (AAm) and/or N‐hydroxymethyl acrylamide (HMA) monomers by varying the monomer and CS ratios were synthesized by free radical chain polymerization. 5‐Fluorouracil (5‐FU), a model anticancer drug, has been added to the feed composition before the polymerization. The characterization of gels indicated that the drug is molecularly dispersed in the polymer matrix. The swelling kinetics of drug‐loaded gels have decreased with increased HMA content at 37°C in both distilled water and buffer solutions with a pH of 2.1 or 7.4. Elastic modulus of the gels increased with the increase in HMA content and higher CS concentration enhanced the elastic modulus positively. Moreover, cumulative release percentages of the gels for 5‐FU were ca. 10% higher in pH 2.1 than those in pH 7.4 media. It was determined that they can be suitable for the use in both gastric and colon environments. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41886.     

Morphology,mechanical properties,and failure topography of semi‐interpenetrating polymer networks based on natural rubber and polystyrene

Semi‐interpenetrating networks (semi‐IPNs) were prepared from natural rubber (NR) and polystyrene (PS) by the sequential method. In these semi‐IPNs the NR phase was crosslinked while the PS phase was uncrosslinked. Different initiating systems such as dicumyl peroxide (DCP), benzoyl peroxide (BPO), and the azobisisobutyronitrile (AIBN) system were used for polymerizing the PS phase. The blend ratio was varied by controlling the swelling of NR in the styrene monomer. The mechanical properties of the semi‐IPNs, namely, density, tensile strength, tear strength, elongation at break, tension set, tensile set, impact strength, and hardness, were determined. The morphology of different IPNs was studied using scanning electron microscopy. A compact morphology with a homogeneous phase distribution was observed in the semi‐IPNs. The properties of the semi‐IPN do not change much with the initiating system. However, in most cases, the DCP initiating system showed slightly superior performance. The tensile and tear‐strength values of the IPNs were found to increase with increasing plastomer content. The crosslink density of the semi‐IPNs also increased with increase in the polystyrene content. The experimental values were compared with theoretical models such as series, parallel, Halpin Tsai, Coran, Takayanaki, Kerner, and Kunori. The tensile and tear‐fracture surfaces were examined using a scanning electron microscope. The fracture patterns were correlated with the strength and nature of the failure. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 2327–2344, 2000     

Poly(vinyl acetate)/polyacrylate semi‐interpenetrating polymer networks. II. Thermal,mechanical, and morphological characterization

The thermal, dynamic mechanical, and mechanical properties and morphology of two series of semi‐interpenetrating polymer networks (s‐IPNs) based on linear poly(vinyl acetate) (PVAc) and a crosslinked n‐butyl acrylate/1,6‐hexanediol diacrylate copolymer were investigated. The s‐IPN composition was varied with different monoacrylate/diacrylate monomer ratios and PVAc concentrations. The crosslinking density deeply affected the thermal behavior. The results showed that a more densely crosslinked acrylate network promoted phase mixing and a more homogeneous structure. The variation in the linear polymer concentration influenced both the morphology and mechanical properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

The effect of composition and the level of crosslinking of the poly(methylmethacrylate) phase on the properties of natural rubber‐poly(methylmethacrylate) semi‐2 interpenetrating polymer networks

The effects of the PMMA content and the cross‐linker level in the poly(methylmethacrylate) component on the dynamic and physico‐mechanical properties of semi‐2 interpenetrating polymer networks based on natural rubber and poly(methylmethacrylate) were determined. The miscibility of the components in these semi‐2 interpenetrating polymer networks was determined using the loss tangent data, obtained from dynamic mechanical thermal analysis and the interphase contents were calculated from modulated scanning calorimetric data. Some component mixing in these semi‐2 interpenetrating polymer networks was evident from these modulated differential scanning calorimetric and dynamic mechanical thermal analysis data. The degree of component mixing increased with cross‐linker level in the PMMA phase. The PMMA content in the semi‐2 IPNs has a significant effect on the tensile and hysteresis behavior of these semi‐2 interpenetrating polymer networks. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012