Konjac Glucomannan/Poly(vinyl alcohol)/Na+Rectorite Nanocomposite Films: Structure, Characteristic and Drug Delivery Behaviour

Konjac glucomannan(KGM)/poly(vinyl alcohol)(PVA)/Na⁺ modified rectorite (Na⁺REC) nanocomposite films were obtained by using a casting/solvent evaporation method. The structures and microstructures of KGM/PVA/Na⁺REC composite films were analyzed by FTIR, XRD, SEM and TEM. A wide variety of material characteristics for the KGM/PVA/Na⁺REC composite films were investigated, including the mechanical property, optical transmittance and thermal stability. The results revealed that by adding PVA more well-intercalative/exfoliated structure of composite film was obtained. As a result, the KGM/PVA/Na⁺REC composite film at low Na⁺REC and PVA content exhibited an improvement in mechanical properties and thermal stability due to a reinforcement effect. In vitro drug-controlled release studies showed a slower and more continuous release for KGM/PVA/Na⁺REC composite film in comparison with KGM/Na⁺REC composite film.     

Preparation and characterization of LDPE/PVA blend films filled with glycerin‐plasticized polyvinyl alcohol

A series of LDPE/PVA blend films were prepared via a twin‐screw extruder, and their morphology, thermal property, oxygen and water vapor permeation, surface properties, and mechanical properties were investigated as a function of the PVA content. During the extrusion process of the blend films, glycerin improved the compatibility and processing conditions between LDPE and PVA. The melting temperature (T_m), melting enthalpy (ΔH_m), crystallinity (%), and thermal stability of the thermal decomposition temperature (T_5%) of the LDPE/PVA blend films decreased with increasing PVA content. The oxygen permeabilities of the blend films decreased from 24.0 to 11.4 cm³·cm (m²·day·atm)^?1 at 23°C. The WVTR increased from 7.8 to 15.0 g(m² day)^?1 and the water uptake increased from 0.13 to 9.31%, respectively. The mechanical properties of blend films were slightly enhanced up to 2% PVA and then decreased. The physical properties of the blend films strongly varied with the chemical structure and morphology depending on the PVA and glycerin. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41985.     

Preparation of hydroxyapatite/poly(vinyl alcohol) composite film with uniformly dispersed hydroxyapatite particles using citric acid

Biocompatible hydroxyapatite (HA)/poly(vinyl alcohol) (PVA) composites and their transparent films were prepared by the coprecipitation and solvent casting method. The formation of HA in PVA composite powder was confirmed by the characteristic phosphate bands at 1100–1032 and 565 cm^?1 at FT‐IR spectra, and the weight ratio of HA to PVA was 50/50 examined by TGA. The crystal melting temperature of HA/PVA decreased compared with that of pure PVA. HA/PVA (50/50) composite powder and pure PVA were dissolved in dimethyl sulfoxide to obtain a film with HA/PVA weight ratio of 10/90. To improve HA particles' dispersity, which is one of the major factors affecting the mechanical properties of composite materials, various contents of citric acid were used for the preparation of HA/PVA films. At a citric acid concentration of 5 wt %, HA/PVA film with good dispersity of HA particles was obtained. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Effects of co‐plasticization of acetyl tributyl citrate and glycerol on the properties of starch/PVA films

Starch/polyvinyl alcohol (PVA) nanocomposite films by film blowing process were successfully obtained. Starch (1700 g), PVA (300 g), and organically modified montmorillonite (OMMT, 200 g) were blended and plasticized with acetyl tributyl citrate (ATBC) and glycerol (GLY) at weight ratios of 0/100, 5/95, 10/90, 15/85, 20/80, and 25/75. The structural, morphology, barrier, mechanical, and thermal properties of the films, as well as molecular interactions in the nanocomposites were analyzed. The 3.98 nm d‐spacing was the highest in starch/PVA nanocomposite films plasticized with ATBC/GLY ratio of 10/90. The film with ATBC/GLY (5/95) had the lowest WVP (3.01 × 10^?10 g m^?1 s^?1 Pa^?1). The longitudinal tensile strength (TS) of starch/PVA nanocomposite films gradually increased from 4.46 to 6.81 MPa with the increase of ATBC/GLY ratios. The T_g steadily increased from 49.2°C to 55.2°C and the ΔH of the nanocomposite films decreased from 81.77 to 51.43 J/g at the presence of ATBC. The addition of ATBC into GLY plasticized starch/PVA/OMMT system enhanced the intermolecular interaction in the nanocomposites. This study proved that ATBC was an excellent compatibilizer in the preparation of starch/PVA/OMMT nanocomposite films. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42544.     

Preparation and performance of PANI–PVA composite film doped with HCl

The polyaniline (PANI)–poly (vinyl alcohol) (PVA) composite film doped with HCl was prepared by adopting PVA as matrix. Effects of PVA content and film drying temperature on properties of HCl–PANI–PVA composite film were studied. A comparison was made for tensile strength, elasticity, conductivity and thermal stability of PVA, HCl–PANI or HCl–PANI–PVA. PVA film presented the highest tensile strength and elasticity (150.8?MPa and 300.0%), but its conductivity was the lowest. The conductivity of HCl–PANI–PVA was the highest (1500?S?m^?1), and tensile strength and elasticity of HCl–PANI–PVA were higher than those of HCl–PANI. The order of their thermal stability is PVA?>?HCl–PANI?>?HCl–PANI–PVA before 260°C, and the order of their thermal stability is HCl–PANI?>?HCl–PANI–PVA?>?PVA after 260°C. At the same time, the structure and conductive mechanism of composite materials were characterised and analysed through infrared and scanning electron microscopy (SEM).     

Preparation and properties of poly(urethane acrylate) (PUA) and tetrapod ZnO whisker (TZnO‐W) composite films

Tetrapod zinc oxide whiskers (TZnO‐Ws) were successfully synthesized via a thermal oxidation method and confirmed using Fourier transform infrared spectroscopy, X‐ray diffraction and scanning electron microscopy. A series of poly(urethane acrylate) (PUA)/TZnO‐W composite films with various TZnO‐W contents were prepared via a UV curing method and their physical properties were investigated to understand their possible use as packaging materials. The morphological, thermal, mechanical, antibacterial and barrier properties of the PUA/TZnO‐W composite films were interpreted as a function of TZnO‐W content. The thermal stability, barrier properties and antibacterial properties of the composite films, which were strongly dependent upon their chemical and morphological structure, were enhanced as the TZnO‐W content increased. The oxygen transmission rate and water vapor transmission rate decreased from 614 to 161 cm³ m^?2 per day and 28.70 to 28.16 g m^?2 per day, respectively. However, the mechanical strength of the films decreased due to the low interfacial interaction and poor dispersion with high TZnO‐W loading. The enhanced barrier properties and good antibacterial properties of the PUA/TZnO‐W composite films indicate that these materials are potentially suitable for many packaging applications. However, further studies are needed to increase the compatibility of polymer matrix and filler. © 2012 Society of Chemical Industry     

Properties of soy protein isolate/poly(vinyl alcohol) blend “green” films: Compatibility,mechanical properties,and thermal stability

Blend films from nature soy protein isolates (SPI) and synthetical poly(vinyl alcohol) (PVA) compatibilized by glycerol were successfully fabricated by a solution‐casting method in this study. Properties of compatibility, mechanical properties, and thermal stability of SPI/PVA films were investigated based on the effect of the PVA concentration. XRD tests confirm that the SPI/PVA films were partially crystalline materials with peaks of 2θ = 20°. And, the addition of glycerol will insert the crystalline structure and destroy the blend microstructure of SPI/PVA. Differential scanning calorimetry (DSC) tests show that SPI/PVA blend polymers have a single glass transition temperature (T_g) between 80 and 115.0°C, which indicate that SPI and PVA have good compatibility. The tension tests show that SPI/PVA films exhibit both higher tensile strength (σ_b) and percentage elongation at break point (P.E.B.). Thermogravimetric analysis (TGA) and water solubility tests show that SPI/PVA blend polymer has more stable stability than pure SPI. All the results reflect that SPI/PVA/glycerol blend film provides a convenient and promising way to prepare soy protein plastics for practical application. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Structure,electrical and optical properties of (PVA/LiAsF6) polymer composite electrolyte films

In this work, Li⁺ ion conducting polymer composite electrolyte films (PECs) were prepared based on poly (vinyl alcohol) (PVA), lithium hexafluoro arsenate (LiAsF₆), and ceramic filler TiO₂ using solution cast technique. The XRD and FTIR spectra were used to determine the complexation of the PVA polymer with LiAsF₆ salt. The ionic conductivities of the (PVA + LiAsF₆) and (PVA + LiAsF₆ + TiO₂) films have been determined by the A.C. impedance measurements in the temperature range 320–440 K. The maximum conductivity was found to be 5.10 × 10^?4 S cm^?1 for PVA:LiAsF₆ (75:25) + 5 wt% TiO₂ polymer composite film at 320 K. The calculation of Li⁺ ion transference number was carried out by the combination of A.C. impedance and D.C. polarization methods and is found to be 0.52 for PVA:LiAsF₆ (75:25) + 5 wt% TiO₂ film. Optical properties such as direct energy gap, indirect energy gap, and optical absorption edge values were investigated in pure PVA and salt complexed PVA films from their optical absorption spectra in the wavelength range of 200–600 nm. The absorption edge was found at 5.76 eV for undoped film, while it is observed at 4.87 and 4.70 eV for 20 and 25 wt% LiAsF₆ doped films, respectively. The direct band gaps for these undoped and salt doped PVA films were found to be 5.40, 5.12, and 4.87 eV, respectively, whereas the indirect band gaps were determined as 4.75, 4.45, and 4.30 eV. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Electrical conductivity of LTA‐zeolite in the presence of poly(vinyl alcohol) and poly(vinyl pyrrolidone) polymers

In this work we studied the electrical behavior of Linde type A zeolite (K⁺) in the presence of two polymers, poly(vinyl alcohol) (PVA) and poly(vinyl pyrrolidone) (PVP), with excellent film forming properties. Homogeneous composite thin films of PVA/LTA‐zeolite and PVP/LTA‐zeolite were prepared with different zeolite concentrations. The current?voltage (I?V) characteristics of the composites were measured at different applied voltages. The results show that the conductivity properties are composition‐ratio‐dependent and are also related to the type of polymers. Moreover, a well‐defined step‐like change was detected in the I?V curve of PVP/LTA‐zeolite at very high applied voltage. © 2013 Society of Chemical Industry     

Dual‐bonding structured ternary composite film of poly(vinyl alcohol)–boric acid–nanodiamond

Ternary composite films of poly(vinyl alcohol) (PVA), boric acid (BA), and detonation nanodiamond (DND) were prepared by aqueous solution method. Because of its excellent mechanical/thermal properties and low friction coefficient, DND is expected to offer PVA film superior performance if the puzzles of particle agglomeration in polymer matrix and fragile interface reaction between DND and PVA can be settled. BA was used as a crosslinking agent to form a strong network structure between DND and PVA. Investigation on microstructure of PVA/BA/DND films and bonding mechanisms therein shows that BA, DND, and PVA may crosslink by oxo‐bridges owing to the interaction of hydroxyl groups. The Young's modulus (E) of composite films was enhanced by nearly 3.3 times with only 0.8 wt % DND loading, and the antiwear, thermal stability, and waterproof properties can be significantly improved after the crosslinking. Meanwhile, the transparency of composite films can be well preserved even with large DND content. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45449.     

Effect of copper sulfate pentahydrate on the structure and properties of poly(vinyl alcohol)/graphene oxide composite films

Poly(vinyl alcohol) (PVA)/graphene oxide (GO)/copper sulfate pentahydrate (CuSO₄·5H₂O) composite films were prepared by the solution casting method, and the effect of CuSO₄·5H₂O on the structure and properties of the PVA/GO composites was investigated. Fourier transform infrared (FTIR) analysis proved the crosslinking interaction between CuSO₄·5H₂O and the ? OH group of PVA. The crystallinity of the composite films increased first and then decreased. For the composite films, the tensile strength, Young's modulus, and yield stress values improved with increasing CuSO₄·5H₂O, whereas the elongation at break decreased compared with that of the neat PVA/GO composite film. The thermogravimetric analysis (TGA) and derivative thermogravimetry (DTG) patterns of the PVA/GO/CuSO₄·5H₂O composite films showed that the thermal stability decreased; this was consistent with the TGA–FTIR analysis. A remarkable improvement in the oxygen‐barrier properties was achieved. The oxygen permeability coefficient was reduced by 60% compared to that of the neat PVA/GO composite film. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44135.     

Effect of plasticizers in poly(vinyl alcohol)‐based hybrid solid polymer electrolytes

Hybrid solid polymer electrolyte films consisting of poly(vinyl alcohol) (PVA), poly(methyl methacrylate) (PMMA), LiBF₄, and ethylene carbonate/propylene carbonate (EC/PC) were prepared with a solvent‐casting technique. The complexation was investigated with Fourier transform infrared and X‐ray diffraction. The ionic conductivities of the electrolyte films were determined with an alternating‐current impedance technique for various temperatures in the range of 302–373 K. The maximum conductivity value, 1.2886 × 10^?3 S/cm, was observed for a PVA–PMMA–LiBF₄–EC complex. Thermogravimetry/differential thermal analysis was performed to ascertain the thermal stability of the electrolyte with the maximum conductivity value. For an examination of the cyclic and reversible performance of the film, a cyclic voltammetry study was carried out. The surface morphology of the EC‐and PC‐based electrolytes was examined with scanning electron microscopy. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2794–2800, 2003     

The Effect of glycerol on the crystalline,thermal, and tensile properties of CaCl2‐doped starch/PVA films

Starch/poly(vinyl alcohol) (PVA) films with the addition of 10 wt% CaCl₂ and various content of glycerol were prepared. The effect of glycerol on the crystalline, thermal, and tensile properties of CaCl₂‐doped starch/PVA films was studied by X‐ray diffraction, thermogravimetric analysis (TGA), and tensile testing, respectively. The effect of glycerol on the miscibility of CaCl₂‐doped starch/PVA films was studied by scanning electron microscopy. The CaCl₂‐doped starch/PVA film became more homogeneous after the addition of glycerol. The addition of glycerol would increase the crystallinity of CaCl₂‐doped starch/PVA film. With the addition of 10 wt% glycerol and 10 wt% CaCl₂, the starch/PVA film showed the highest degree of crystallinity. The TGA results show that the thermal stability of CaCl₂‐doped starch/PVA film increased after the addition of glycerol. The toughness of CaCl₂‐doped starch/PVA films was enhanced with the addition of glycerol. The starch/PVA film with the addition of 10 wt% CaCl₂ and 20 wt% glycerol showed the tensile strength of 17 MPa and the elongation at break of 428%. Moreover, the water sorption of CaCl₂‐doped starch/PVA film decreased after the addition of glycerol at the low and intermediate relative humidity of 33 and 54%. POLYM. COMPOS., 37:3191–3199, 2016. © 2015 Society of Plastics Engineers     

Structure of poly(vinyl alcohol)-iodine complex formed in the amorphous phase of poly(vinyl alcohol) films

The effect of syndiotactivity of poly(vinyl alcohol) (PVA) both on the formation and thermal stability of the complex formed in the amorphous phase of PVA films is investigated, and then a model of the complex is presented. The amount of the complex formed in syndiotacticity-rich PVA is much larger than that formed in atactic PVA under a given iodine-soaking condition, and the former complex has a higher thermal stability in the soaking solution than the latter. The complex formed in the amorphous phase is proposed to have such a structure as that in which a linear polyiodine I₅^? or I₅^? with a 3.1 A? periodicity is enveloped by four PVA segments of syndiotactic configuration with extended conformation. In this model, these four PVA chains participating in a complex are supposed to be fixed by interchain hydrogen bonds. The observed X-ray meridional intensity curve of iodinated PVA film can be explained by a series of two I₅^?. © 1993 John Wiley & Sons, Inc.     

Preparation of high styrenic sulfonated polySEPS/clay composite film for proton exchange membranes (PEMs)

High styrenic sulfonated polystyrene-block-poly(ethyl-ran-propylene)-block-polystyrene (S-polySEPS) containing 65% styrene groups was prepared by sulfonation at the phenyl group. Also, S-polySEPS/clay composite film was produced by mixing organic clay with S-polySEPS in organic blending solvent (THF/DCE/IPA). The proton conductivity of the pure S-polySEPS film and S-polySEPS/clay composite films was ranged from 10^?2 to 10^?1 S cm^?1. In particular, the S-polySEPS/clay 1 wt% composite film was shown higher proton conductivity, higher ion exchange capacity (IEC) and lower water uptake than Nafion^® 117 membrane. However, the proton conductivity of the S-polyseps/clay composite films slightly was decreased with increasing the contents of organic clay. Thermogravimetric analysis (TGA) was carried out to investigate the thermal stability of S-polySEPS/clay composite films. The ¹H NMR and FT-IR analysis is used to verify the sulfonation reaction on the phenyl groups of S-polySEPS. The micro-phase separated images and dispersed organic clay state of the prepared films were confirmed by transmission electron microscopy (TEM) and X-ray diffraction (XRD).     

Roll-to-roll processable MXene-rGO-PVA composite films with enhanced mechanical properties and environmental stability for electromagnetic interference shielding

MXene films promise potential electromagnetic interference (EMI) shielding materials, but poor scalable processability, environmental instability, and weak mechanical properties severely restrict their applications. Herein, we engineer the large-area, high-performance, and compact nacre-like MXene-based composite films through cooperative co-assembly of Ti₃C₂T_X MXene and reduced graphene oxide (rGO) in the presence of polyvinyl alcohol (PVA). The resulting MXene-rGO-PVA composite films benefit from enhanced bonding strength and extra chain bridging effect of linear PVA molecules enriched with hydroxyl groups. Therefore, the composite film achieves high tensile strength (～238 MPa) and toughness (～1.72 MJ m^?3) while having high conductivity of ～32 S cm^?1. A significant EMI shielding effectiveness (41.35 dB) is also demonstrated, with an excellent absolute shielding effectiveness of ～20,200 dB cm² g^?1 at only 12-μm thickness. Moreover, due to the synergistic effect of multiple components, the composite films maintain a stable EMI shielding performance in harsh environments (sonication, hot/cold annealing, and acid solution) with mechanical properties that fluctuate only within 10% compared to the original film. More importantly, commercial polyethylene terephthalate release liner can be applied for the film coating, facilitating continuous roll-to-roll production of large-area films and future applications.     

Effect of nano-SiO2 on the compatibility of PVA/RSF blend

A series of poly(vinyl alcohol) (PVA)/regenerated silk fibroin (RSF)/nano-silicon dioxide (nano-SiO₂) blend films were prepared by solution casting method, in which nano-SiO₂ was obtained via sol?Cgel process. The structure, properties, and morphology of the films related to the compatibility were investigated by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). XRD peaks of PVA/RSF/nano-SiO₂ (1.0?wt?%) blends decreased in intensity indicated that formation of PVA and RSF crystal lattices was hindered by nano-SiO₂ particles. FTIR spectroscopy analysis of PVA/RSF/nano-SiO₂ films confirmed that both Si?CO?CC linkage and hydrogen bonding were formed among PVA, RSF, and nano-SiO₂. SEM showed that there was no obvious phase separation in PVA/RSF/nano-SiO₂ (1.0?wt?%) film although small uniform blur particles can still be found. In addition, TEM showed nano-particles were well dispersed through the PVA/RSF polymer matrix. Besides, the observed shift in glass transition temperatures (T _g) and improvement in thermal properties of composite films suggested the enhanced compatibility due to interfacial bonding and intermolecular interactions. Therefore, these results indicated that the compatibility of PVA/RSF was improved effectively by the addition of nano-SiO₂.     

Thermal and flammability studies of poly(vinyl alcohol) composites filled with sodium hydroxide

Poly(vinyl alcohol) (PVA) is a polymer of great value due to its wide spread applications. The present article describes the effect of sodium hydroxide on the flammability, thermal degradation, and tensile strength properties of PVA. The PVA/sodium hydroxide composite films at different loading levels of sodium hydroxide, i.e., 0.5, 1, 2, 3, and 4.5 wt % were prepared by solution casting technique. Dynamic thermogravimetry was used to study the thermal degradation behavior of samples at four different linear heating rates, i.e., 2.5, 5, 10, and 20 °C min^?1 under nitrogen atmosphere. The degradation activation energy values were calculated using reliable and preferred multiple‐heating rate methods. Limiting oxygen index (LOI) and UL 94 tests were carried out to check the flammability behavior of the samples. The presence of sodium hydroxide in PVA brought significant changes in the thermal and flammability performance. PVA/sodium hydroxide samples though showed lower initial decomposition temperature, but overall more thermal stability results as evidenced from the higher activation energy and char residue values. LOI and UL 94 tests indicate that sodium hydroxide greatly enhanced the flame retardancy of PVA/sodium hydroxide films. Based on the thermal and flammability level, the optimum concentration of sodium hydroxide is worked out. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Fabrication and characteristics of graphene oxide/nanocellulose fiber/poly(vinyl alcohol) film

Poly(vinyl alcohol) (PVA), PVA/nanocellulose fiber (CNF), and PVA/CNF/graphene oxide (GO) films were prepared simply by casting stable aqueous mixed solutions. FTIR investigation indicated that hydrogen bonding existed between the interface of GO and PVA‐CNF. Scanning electron microscopy and X‐ray diffraction analysis showed that GO was uniformly dispersed in PVA‐CNF matrix. Introducing CNF into PVA caused a significant improvement in tensile strength, and further incorporating GO into PVA/CNF matrix led to a further increase. The tensile strength of the neat PVA film, PVA/CNF composite, and PVA/CNF/GO film (0.6 wt % GO) was 43, 69, and 80 MPa, respectively. Moreover, when incorporating 8 wt % CNF into PVA matrix, O₂ permeability and water absorption decreased from 13.36 to 11.66 cm³/m²/day and from 164.2% to 98.8%, respectively. Further adding 0.6 wt % GO into PVA/CNF matrix resulted in a further decrease of permeability and water absorption to 3.19 cm³/m²/day and 91.2%, respectively. Furthermore, for all composite samples, the transmittance of visible light was higher than 67% at 800 nm. CNF and GO‐reinforced PVA with high mechanical and barrier properties are potential candidates for packaging industry. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45345.     

Transparent and thermally stable improved poly (vinyl alcohol)/Cloisite Na/ZnO hybrid nanocomposite films: Fabrication,morphology and surface properties

A series of poly(vinyl alcohol)/Cloisite Na⁺-Tyrosine/Zinc oxide (PVA/Cloisite Na⁺-Tyr/ZnO) bionanocomposites were prepared by dispersing ZnO nanoparticles in solution containing mixture of the PVA and modified Cloisite Na⁺. Structure of nanocomposite coatings was investigated by X-ray diffraction and Fourier-transform infrared spectroscopy. The thermal stability and optical properties of bionanocomposite were characterized by thermogravimetric analysis and UV–vis spectroscopy, respectively. The introduction of ZnO nanoparticles into PVA/Cloisite Na⁺-Tyr mixed solutions significantly increased the thermal stability of the obtained films. The results revealed that the high UV-shielding efficiency of the composites: for a film containing 6.0 wt% of ZnO nanocrystals, over 92% of UV light at wavelengths of 368 nm was absorbed while the optical transparency in the visible region was slightly below that of a PVA/Cloisite Na⁺-Tyr film.