Floral Biosynthesis of Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> Nanoparticles Using <Emphasis Type="Italic">Chaenomeles</Emphasis> sp. Flower Extracts for Efficient Medicinal Applications

Manganese oxide (Mn₃O₄) and iron oxide (Fe₂O₃) nanoparticles were successfully synthesized with the flower extracts of Chaenomeles sp. This is the first ever approach to synthesize nanoparticles from Chaenomeles sp. flower extracts. The organic molecules present in the flower extracts actively converted the nitrate precursor into its corresponding nanoparticles. The organic molecules that are involved in the synthesis of nanoparticles are identified using different phytochemical and gas chromatography–mass spectrometry analyses. The identified components are glycosides, alkaloids, terpenoids, saponins, flavonoids, quinines, and steroids. The structural and chemical compositions of the synthesized powder were also analyzed. The x-ray powder diffraction analysis revealed that the particles show tetragonal and rhombohedral crystalline phases. The Fourier transform infrared spectroscopy analysis showed the functional groups that are involved in the reduction of nitrates into the corresponding nanoparticles. Energy-dispersive x-ray spectroscopy analysis confirmed the presence of the elements in the synthesized nanoparticles. Transmission electron microscopy images showed the formation of spherical nanoparticles with an average size of 30–100 nm. Antioxidant analysis showed that the synthesized nanoparticles had excellent antioxidant potential. The antibacterial study showed that they inhibit the growth of harmful bacteria such as Pseudomonas aeruginosa and Streptococcus pyogenes. Thus, this study proposes a new eco-friendly and nontoxic method to synthesize nanoparticles for medicinal applications.     

Synthesis and characterization of hollow Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> submicrospheres by a simple solvothermal synthesis

Hollow single crystal Fe₃O₄ submicrospheres, which exhibit excellent magnetic properties, have been synthesized by a simple solvothermal process. These Fe₃O₄ particles have nanocrystallites with an average diameter of about 300 nm and are constructed with a hollow sphere structure that has an inside diameter of about 70 nm. The growth of the hollow Fe₃O₄ submicrospheres involves the cooperation of Ostwald ripening and oriented re-aggregation with increasing reaction time. As the oriented aggregation continues, adjacent nanocrystals fuse together along the (311) direction and the final product is formed as hollow spheres. Optional re-aggregation of the Fe₃O₄ hollow spheres may happen in the EG and N₂H₄·H₂O solution. The synthesized Fe₃O₄ particles show different magnetic properties and can be adjustable with morphological variation.     

Corrosion Behavior and Microhardness of Ni-P-SiO<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Nano-composite Coatings on Magnesium Alloy

In the present work, nano-composites of Ni-P-SiO₂-Al₂O₃ were coated on AZ91HP magnesium alloy. The surface morphology of the nano-composite coating was studied by field emission scanning electron microscopy (FESEM). The amount of SiO₂ in the coating was determined by energy-dispersive analysis of x-ray (EDX), and the crystalline structure of the coating was examined by x-ray diffractometer (XRD). All the experiments concerning the corrosion behavior of the coating carried out in 3.5 wt.% NaCl solution and evaluated by electrochemical impedance spectroscopy (EIS) and polarization technique. The results showed that an incorporation of SiO₂ and Al₂O₃ in Ni-P coating at the SiO₂ concentration of 10 g/Land 14 g/LAl₂O₃ led to the lowest corrosion rate (i _corr = 1.3 µA/cm²), the most positive E _corr and maximum microhardness (496 VH). Furthermore, Ni-P-SiO₂-Al₂O₃ nano-composite coating possesses less porosity than that in Ni-P coating, resulting in improving corrosion resistance.     

Synthesis,Structural, and Adsorption Characteristics of γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>/SiO<Subscript>2</Subscript> Composite

The γ-Fe₂O₃/SiO₂ composite is synthesized by coprecipitation of the magnetic carrier γ-Fe₂O₃ (specific surface area S = 17 m²/g, pore volume V = 0.51 cm³/g) and silicon dioxide from a solution of sodium-liquid glass. The influence of the synthesis conditions (SiO₂ content, temperature, introduction of electrolyte into reaction mixture) on the structural and adsorption characteristics of the resulting composites is studied. Coprecipitation in the presence of electrolyte (5% NaCl) makes it possible to obtain the most highly porous composites. At SiO₂ content from 20 to 50%, S is from 70 to 150 m²/g, V is from 0.74 to 0.89 cm³/g. These composites have a large adsorption capacity for test substances: a main dye, methylene blue, and an enzyme, cytochrome C. The capacity of these composites on dye (15–40 mg/g) is approximately 10–30 times larger that of the initial iron oxide (1.2 mg/g), and on enzyme (130–280 mg/g) 3–6 times greater than the capacity of iron oxide (45 mg/g). Such composites can be used as magnetic sorbents to for purification, concentration or immobilization of water-soluble organic substances and biopolymers.     

Tunneling magnetoresistance in sintered Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> samples diluted with Fe and α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

Electric transport and magnetoresistance characteristics were investigated for Fe₃O₄-x Fe(x=0, 10, 20 wt.%) samples and Fe₃O₄-α-Fe₂O₃ samples sintered at 500°C. For composition dependence of Fe₃O₄-x Fe samples, the largest room temperature MR, 3.3% at 10 kOe, was obtained from a Fe₃O₄-10 Fe sample. For the surface heat treatment dependence of Fe₃O₄ powders, the largest room temperature MR, 4% at 10 kOe, was obtained from a Fe₃O₄-α-Fe₂O₃ sample sintered with Fe₃O₄ powders heated at 200°C in air. It was found that these enhanced MR ratios always appear together with the appropriate excess resistance which is regarded as the tunneling barrier. These enhanced MR ratios of Fe₃O₄-10 Fe and Fe₃O₄-α-Fe₂O₃ samples can be explained by the increased interparticle contact sites and the appropriate thickness of α-Fe₂O₃, respectively.     

Oxidation Behavior of NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript> Spinel-Coated Interconnects in Wet Air

Corrosion of boilers and heat exchangers is accelerated in the presence of vanadium, sodium, and sulfur from low-grade fuels. Several iron- and nickel-based alloys were immersed in 60 mol% V₂O₅–40Na₂SO₄ salt for 1000 h in order to investigate their degradation behavior at 600 °C in air. Materials performance was analyzed by means of substrate recession rate and metallographic characterization. Their corrosion mechanism is characterized by the formation of a sulfide/oxide layer adjacent to the metal, the dissolution of scale oxides in the molten deposit, and their precipitation near the outer surface of the deposit. High Ni- and Cr-containing alloys show the lowest metal loss rates. Al addition was detrimental due to low-melting eutectic AlVO₄–V₂O₅ formation. Fe–Cr-based alloys showed the highest metal loss rates. In such alloys, high Cr additions (above 20%) did not improve the performance due to the negative synergetic effect by simultaneous dissolution of Fe₂O₃ and Cr₂O₃. The predominant salt composition at the corrosion front varied from vanadate rich to sulfate rich during the exposure. This change in the attacking salt makes it difficult to find a protective material for mixed sulfate–vanadate-induced corrosion.     

Preparation and optical properties of Y<Subscript>2</Subscript>O<Subscript>3</Subscript>/SiO<Subscript>2</Subscript> powder

Y(NO3)3 and NH3·H2O were used as a raw materials,and nano-Y2O3 powder was successfully synthesized by a precipitation method.Employing TEOS as a raw material,SiO2 powder was successfully prepared by a alkoxide-hydrolysis method,and a Y2O3/SiO2 composite powder was obtained by coating.The Y2O3,SiO2,and Y2O3/SiO2 powders were characterized using X-ray diffraction(XRD),scanning electron microscopy(SEM),and Fourier transform infrared spectrophotometer(FT-IR);the Y2O3 and Y2O3/SiO2 powders were further examined ...     

Preparation and properties of a nano TiO<Subscript>2</Subscript>/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> composite superparamagnetic photocatalyst

Nano TiO₂/Fe₃O₄ composite particles with different molar ratios of TiO₂ to Fe₃O₄ were prepared via sol-gel method. X-ray diffraction, transmission electron microscopy, and vibration sample magnetometry were used to characterize the TiO₂/Fe₃O₄ particles. The photocatalytic activity of the particles was tested by degrading methyl blue solution under UV illumination (254 nm). The results indicate that with the content of TiO₂ increasing, the photocatalytic activity of the composite particles enhances, while the magnetism of the particles decreases. When the molar ratio of TiO₂ to Fe₃O₄ is about 8, both the photocatalytic activity and magnetism of the TiO₂/Fe₃O₄ particles are relatively high, and their photocatalytic activity remains well after repeated use.     

Effects of La<Subscript>2</Subscript>O<Subscript>3</Subscript> on Mechanical Properties and Corrosion Resistance of H62 Brass

In this article, the effects of lanthanum oxide (La₂O₃) on the microstructure and mechanical properties of H62 brass were investigated by using the universal testing machine, Brinell hardness tester, optical microscope, and scanning electron microscope (SEM). Immersion corrosion and electrochemical measurements were carried out to identify the influence of La₂O₃ on the corrosion behavior of the H62 brass. The phase constitution, microstructure, and phase composition of the H62 brass were analyzed by x-ray diffraction, SEM, and energy-dispersive spectrometer, respectively. The results show that the microstructure of α phase changes from dendrite grains to equiaxed grains, and the content and distribution of β phase are improved significantly. When the La₂O₃ content reaches 0.8 wt.%, the H62 brass obtains favorable comprehensive mechanical properties and the strength and hardness decrease but elongation increases, which is conducive to plastic processing. In addition, under the optimum amount of 0.8 wt.% La₂O₃ content, the corrosion rate of immersion corrosion attains the minimum values: As 12.6 g m^?2 h^?1, it decreases by 24%; as the corrosion potential changes from ?1.1327 V to ?0.328 V, it increases by 70.9%; and as the corrosion current density decreases from ?2.833 mA mm^?2 to ?3.28 mA mm^?2 corrosion, it decreases by 15.78%, when compared with H62 brass.     

Comparative analysis of the kinetics of dissolution of oxides Y<Subscript>2</Subscript>O<Subscript>3</Subscript> and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> in the iron matrix upon mechanical alloying

The kinetics of low-temperature dissolution of oxides Y₂O₃ and Fe₂O₃ in an iron matrix during mechanical alloying has been studied using electron microscopy. It has been shown that the dissolution rate upon deformation of primary coarse oxides Fe₂O₃ in α iron (and, hence, saturation of the α matrix with oxygen) during treatment in a ball mill for up to 10 h is several times higher than the dissolution rate of Y₂O₃ oxides. The high-temperature (1100°C) annealing of a mechanoalloyed mixture of Fe + 1.5% Y + 1.35% Fe₂O₃ leads to the precipitation of 60% (of the total number of particles) secondary oxides 2–5 nm in size and only of 5–7% secondary nanooxides in a mechanoalloyed mixture of Fe + 2% Y₂O₃.     

Phase Formation of the Yttrium Aluminates in the Y<Subscript>2</Subscript>O<Subscript>3</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiC System

Phase formation sequence of the yttrium aluminates in the Y₂O₃-Al₂O₃-SiC ternary system as temperature increases were investigated via x-ray diffraction (XRD). Results showed that YAM (monoclinic), YAP (perovskite) and YAG (garnet) were the yttrium aluminates presented in the solid-state reacted samples at a fixed Al₂O₃:SiC ratio of 1:1. Formation of the yttrium aluminates depended on the temperature. The YAM, YAP and YAG started to form below 1150 °C, at 1300 °C, and at 1450 °C, respectively. Accordingly, two behavior phase diagrams of the Y₂O₃-Al₂O₃-SiC ternary system were recognized, one is in the temperature range of 1150-1300 °C and the other is in 1300-1450 °C, respectively. Thereafter, the phase equilibrium was reached in the temperature range of 1450-1700 °C. Effects of SiC on the phase formation processes in the ternary system were discussed.     

Phase Relations in the Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-V<Subscript>2</Subscript>O<Subscript>5</Subscript>-MoO<Subscript>3</Subscript> System in the Solid State. The Crystal Structure of AlVO<Subscript>4</Subscript>

Phase relations in the ternary oxide system Al₂O₃-V₂O₅-MoO₃ in the solid state in air have been investigated by using the x-ray diffraction (XRD) and differential thermal analysis/thermogravimetric (DTA/TG) methods. It was confirmed that in the subsolidus area of the Al₂O₃-V₂O₅-MoO₃ system, there exist seven phases, that is Al₂O₃, V₂O_5(s.s.), MoO₃, AlVO₄, Al₂(MoO₄)₃, AlVMoO₇, and V₉Mo₆O₄₀. Seven fields, in which particular phases coexist at equilibrium, were isolated. The crystal structure of AlVO₄ has been refined from x-ray powder diffraction data. Its space group is triclinic, , Z = 6, with a = 0.65323(1) nm, b = 0.77498(2) nm, c = 0.91233(3) nm, α = 96.175(2)°, β = 107.234(3)°, γ = 101.404(3)°, V = 0.42555 nm³. The crystal structure of the compound is isotypic with FeVO₄. Infrared (IR) spectra of AlVO₄ and FeVO₄ are compared.     

Electrolytic Production of Ti<Subscript>5</Subscript>Si<Subscript>3</Subscript>/TiC Composites by Solid Oxide Membrane Technology

This paper investigated the electrolytic production of Ti₅Si₃/TiC composites from TiO₂/SiO₂/C in molten CaCl₂. The solid-oxide oxygen-ion-conducting membrane tube filled with carbon-saturated liquid tin was served as the anode, and the pressed spherical TiO₂/SiO₂/C pellet was used as the cathode. The electrochemical reduction process was carried out at 1273 K and 3.8 V. The characteristics of the obtained cathode products and the reaction mechanism of the electroreduction process were studied by a series of time-dependent electroreduction experiments. It was found that the electroreduction process generally proceeds through the following steps: TiO₂/SiO₂/C → Ti₂O₃, CaTiO₃, Ca₂SiO₄, SiC → Ti₅Si₃, TiC. The morphology observation and the elemental distribution analysis indicate that the reaction routes for Ti₅Si₃ and TiC products are independent during the electroreduction process.     

Electrochemical properties of spinel compound LiNi_（0.5）Mn_（1.2）Ti_（0.3）O_4 as cathode materials for lithium ion batteries

The electrochemical properties of spinel compound LiNi0.5Mn1.2Ti0.3O4 were investigated in this study.The chemicals LiAc·2H2O,Mn(Ac)2·2H2O,Ni(Ac)2·4H2O,and Ti(OCH3)4 were used to synthesize LiNi0.5Mn1.2Ti0.3O4 by a simple sol-gel method.The discharge capacity of the sample reached 134 mAh/g at a current rate of 0.1C.The first and fifth cycle voltammogram almost overlapped,which showed that the prepared sample LiNi0.5Mn1.2Ti0.3O4 had excellent good cycle performance.There were two oxidation peaks at 4.21 V and 4.86 V,and two reduction peaks at 4.55 V and 3.88 V in the cycle voltammogram,respectively.By electrochemical impedance spectroscopy and its fitted result,the lithium ion diffusion coefficient was measured to be approximately 7.76 × 10?11 cm2/s.     

Magnetic properties and crystallization kinetics of Zn<Subscript>0.5</Subscript>Ni<Subscript>0.5</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript>

Precursor of nanocrystalline Zn0.5Ni0.5Fe2O4 was obtained by grinding mixture of ZnSO4·7H2O,NiSO4·6H2O,FeSO4·7H2O,and Na2CO3·10H2O under the condition of surfactant polyethylene glycol(PEG)-400 being present at room temperature,washing the mixture with water to remove soluble inorganic salts and drying it at 373 K.The spinel Zn0.5Ni0.5Fe2O4 was obtained via calcining precursor above 773 K.The precursor and its calcined products were characterized by differential scanning calorimetry(DSC) ,Fourier transform infrared(FT-IR) ,X-ray diffraction(XRD) ,and vibrating sample magnetometer(VSM) .The result showed that Zn0.5Ni0.5Fe2O4 obtained at 1073 K had a saturation magnetization of 74 A·m2·kg-1.Kinetics of the crystallization process of Zn0.5Ni0.5Fe2O4 was studied using DSC technique,and kinetic parameters were determined by Kissinger equation and Moynihan et al.equation.The value of the activation energy associated with the crystallization process of Zn0.5Ni0.5Fe2O4 is 220.89 kJ·mol-1.The average value of the Avrami exponent,n,is equal to 1.59±0.13,which suggests that crystallization process of Zn0.5Ni0.5Fe2O4 is the random nucleation and growth of nuclei reaction.     

Phase Transformations During Li-Insertion into V<Subscript>2</Subscript>O<Subscript>5</Subscript> at Elevated Temperature

Recent interest in developing cathode materials for an elevated temperature operation of Li-ion batteries has motivated researchers to explore the possibility of using layered V₂O₅ as a potential candidate because of its high capacity and cyclic stability. Despite a wide lithiation voltage window of V₂O₅ (between 1.0 V and 4.0 V), compositional fluctuations, metal dissolution, and so on contribute to capacity loss at high temperatures. A first discharge of V₂O₅ to voltages below 2.0 V has been observed to be associated with a series of phase transformations at both room temperature and high temperature and has been characterized here. From structural characterization of harvested electrodes post–first discharge, a new Li-rich phase was observed to be formed at 120°C and the composition was estimated.     

Preparation of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles by acoustic and hydrodynamic cavitation techniques and corrosion inhibition release studies using its nanocontainers

The present work deals with two parts, the first one deals with the synthesis of Fe₂O₃ nanoparticles using acoustic and hydrodynamic cavitation techniques and the second one deals with layer by layer (LBL) assembly of Fe₂O₃ nanocontainers by loading a corrosion inhibitor, benzotriazole, in polyelectrolyte layers. The nanoparticles obtained from both these techniques are used as a core in the preparation of nanocontainers. The morphology of the nanoparticles and nanocontainers was analyzed by TEM. The release rate and corrosion inhibition properties of nanocontainers were evaluated for various prepared samples. Electrochemical impedance test and corrosion inhibition performance of Fe₂O₃ nanocontainers dispersed in epoxy coating were also evaluated. The presence of nanocontainers in the epoxy resin decreases the corrosion rate from 7.6 to 0.05 mm/year.     

Influences of NiCO<Subscript>3</Subscript> content on the microstructure and magnetic properties of Ni<Subscript>0.5</Subscript>Zn<Subscript>0.5</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> powders prepared by SHS

Stoichiometric Ni_0.5Zn_0.5Fe₂O₄ powders were produced by self-propagating high temperature synthesis (SHS). The effects of NiCO₃ content in the raw materials on the microstructure and magnetic properties of Ni-Zn ferrite powders were systematically studied. The Ni_0.5Zn_0.5Fe₂O₄ powders were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The magnetic properties of the powders were evaluated by vibrating sample magnetometry (VSM). The results show that the introduction of NiCO₃ into reactants improves the conversion percentage and refines the Ni_0.5Zn_0.5Fe₂O₄ particles. The increase of NiCO₃ content enhances the magnetic properties of Ni_0.5Zn_0.5Fe₂O₄. Particularly, the saturation magnetization reaches the maximum when the NiCO₃ content is 3 at.%.     

Nanostructural Free-Volume Effects in Humidity-Sensitive MgO-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Ceramics for Sensor Applications

Technologically modified spinel MgO-Al₂O₃ ceramics were prepared from Al₂O₃ and 4MgCO₃·Mg(OH)₂·5H₂O powders at sintering temperatures of 1200, 1300, and 1400 °C. Free-volume structural effects in MgO-Al₂O₃ ceramics and their electrophysical properties were studied using combined x-ray diffraction, scanning electron microscopy, Hg-porosimetry, and positron annihilation lifetime spectroscopy. It is shown that increasing of sintering temperature from 1200 to 1400 °C results in the transformation of pore size distribution in ceramics from tri- to bi-modal including open macro- and meso(micro)pores with sizes from ten to hundreds nm and nanopores with sizes up to a few nm. Microstructure of these ceramics is improved with the increase of sintering temperature, which results in decreased amount of additional phases located near grain boundaries. These phase extractions serve as specific trapping centers for positrons penetrating the ceramics. The positron trapping and ortho-positronium decaying components are considered in the mathematical treatment of the measured spectra. Classic Tao-Eldrup model is used to draw the correlation between the ortho-positronium lifetime and the size of nanopores, which is complementary to porosimetry data. The studied ceramics with optimal nanoporous structure are highly sensitive to humidity changes in the region of 31-96% with minimal hysteresis in adsorption-desorption cycles.     

Facile synthesis, magnetic and microwave absorption properties of Fe3O4/polypyrrole core/shell nanocomposite

Fe₃O₄/polypyrrole (PPy) core/shell nanocomposite, with Fe₃O₄ nanoparticle as core and PPy as shell, could be facilely synthesized via in situ chemical oxidative polymerization of pyrrole monomers on the surface of Fe₃O₄ nanoparticles. The results indicate that core/shell nanocomposite consists of Fe₃O₄ core with the mean diameter of 100 nm and adjacent PPy shell with a thickness of about 70 nm. The as-prepared Fe₃O₄/PPy core/shell nanocomposite exhibits a saturated magnetization of 20.1 emu/g and coercivity value of 368.3 Oe, respectively. The electromagnetic characteristics of Fe₃O₄/PPy core/shell nanocomposite were also investigated with a vector network analyzer in the 2-18 GHz range. The absorbing peak position moves to lower frequency with increasing the thicknesses of samples. The value of the minimum reflection loss is −22.4 dB at 12.9 GHz for Fe₃O₄/PPy core/shell nanocomposite with a thickness of 2.3 mm, and a broad peak with a bandwidth lower than −10 dB is about 5 GHz. Such strong absorption is attributed to better electromagnetic matching due to the existence of PPy and the special core/shell structure.