The homo and copolymerisation of 2-(dimethylamino)ethyl methacrylate in supercritical carbon dioxide

This paper describes the free radical dispersion homopolymerisation of 2-(dimethylamino) ethyl methacrylate (DMA) and copolymerisation of DMA with methyl methacrylate (MMA) in supercritical carbon dioxide (scCO₂). The polymerisations are performed in the presence of two commercially available stabilisers, poly(dimethylsiloxane) monomethacrylate macromonomer (PDMS-mma) and the carboxylic acid terminated perfluoropolyether (Krytox 157FSL). Dry, fine powdered polymer product was produced for the copolymer under optimised conditions, but only aggregated solid is formed for homo poly(DMA). The effect of reaction time, stabiliser, copolymer composition and reaction pressure on the yield, molecular weight and morphology of the copolymers has been investigated.     

Phase behavior for the poly[2-(2-ethoxyethoxy)ethyl acrylate] and 2-(2-ethoxyethoxy)ethyl acrylate in supercritical solvents

Pressure-composition (p, x) isotherms were obtained for the carbon dioxide + 2-(2-ethoxyethoxy)ethyl acrylate [2-(2-EE)EA] system at five temperatures (313.2 K, 333.2 K, 353.2 K, 373.2 K, and 393.2 K) and pressure up to 22.86 MPa. The carbon dioxide + 2-(2-EE)EA system exhibits type-I phase behavior with a continuous mixture critical curve. The experimental results for carbon dioxide + 2-(2-EE)EA mixtures are correlated using the Peng–Robinson equation of state (PR-EOS) using mixing rule including two adjustable parameters. The critical property of 2-(2-EE)EA is estimated with the Joback–Lyderson method.Experimental data up to 485 K and 206.6 MPa are reported for binary and ternary mixtures of poly(2-(2-ethoxyethoxy)ethyl acrylate) [P(2-(2-EE)EA)] + carbon dioxide + 2-(2-EE)EA, P(2-(2-EE)EA) + carbon dioxide + dimethyl ether (DME), P(2-(2-EE)EA) + carbon dioxide + propylene and P(2-(2-EE)EA) + carbon dioxide + 1-butene systems. High-pressure cloud-point data are also reported for P(2-(2-EE)EA) in supercritical carbon dioxide, propane, propylene, butane, 1-butene, and DME at temperature to 474 K and a pressure range of (8.45–206.6) MPa. Cloud-point behavior for the P(2-(2-EE)EA) + carbon dioxide + 2-(2-EE)EA system were measured in changes of the pressure–temperature (p, T) slope and with 2-(2-EE)EA mass fraction of 0.0 wt%, 5.9 wt%, 14.9 wt%, 30.3 wt% and 60.2 wt%. With 0.650 2-(2-EE)EA to the P(2-(2-EE)EA) + carbon dioxide solution, the cloud point curves take on the appearance of a typical lower critical solution temperature boundary. The P(2-(2-EE)EA) + carbon dioxide + (0.0–46.6) wt% DME systems change the (p, T) curve from upper critical solution temperature region to lower critical solution temperature region as the DME mass fraction increases. Also, the impact by propylene and 1-butene mass fraction for the P(2-(2-EE)EA) + carbon dioxide + propylene and 1-butene system is measured at temperatures to 454 K and a pressure range of (75.7 to 119.6) MPa.     

Copolymerizations of 2-(dimethylamino)ethyl methacrylate with (methyl)acrylates initiated by a neutral Pd(II)-based complex

The copolymerization reactions of 2-(dimethylamino)ethyl methacrylate (DMAEMA) with methyl methacrylate (MMA), butyl methacrylate (n-BMA), methyl acrylate (MA), and butyl acrylate (n-BA), respectively, by an environmentally stable palladium acetylide Pd(PPh₃)₂(CCPh)₂ (PPP) have been investigated. PPP shows relatively high catalytic activity for these copolymerizations. Reactivity ratios of these copolymerizatins have been measured and calculated by the Kelen-Tüdös method for the first time, and their values are as follows: (1) r_DMAEMA=1.13, r_MMA=1.07; (2) r_DMAEMA=0.77, r_n-BMA=0.84; (3) r_DMAEMA=1.54, r_MA=0.09; (4) r_DMAEMA=0.71, r_n-BA=0.14. The mechanism of these copolymerizations was discussed and a radical mechanism was proposed.     

(S)-2-(ethyl propionate)-(O-ethyl xanthate)- and (S)-2-(Ethyl isobutyrate)-(O-ethyl xanthate)-mediated RAFT polymerization of vinyl acetate

(S)-2-(Ethyl propionate)-(O-ethyl xanthate) (X1) and (S)-2-(Ethyl isobutyrate)-(O-ethyl xanthate) (X2) were used as the reversible addition-fragmentation chain transfer (RAFT) agents for the radical polymerization of vinyl acetate (VAc). The former showed the better chain transfer ability in the polymerization at 60°C. Kinetic study with both RAFT agents showed pseudo-first order kinetics up to around 85% monomer conversion. Molecular weight of the resulting polymer increased linearly with increase in the monomer conversion up to around 85%. The observed molecular weights calculated from ¹H-NMR spectrum [M_n(NMR)] are close to the corresponding theoretical molecular weights [M_n(theor)]. The corresponding polydispersity index (PDI) of the resulting polymers remained almost constant at around 1.2 up to ∼ 65% monomer conversion and then increased gradually with the further increase in the monomer conversion. Chain-end analysis of the resulting polymers by ¹H-NMR showed clearly that polymerization started with the radical forming out of the xanthate mediator. The negligible homo-chain extension and the hetero-chain extension involving synthesis of poly(VAc)-b-poly(NVP) diblock copolymer were occurred. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis of well-defined poly[(2-β-D-glucopyranosyloxy)ethyl acrylate] by atom transfer radical polymerization

The ‘living’ radical polymerization of 2-(2′,3′,4′,6′-tetra-O-acetyl-β-D -glucopyranosyloxy)ethyl acrylate (AcGEA) by atom transfer radical polymerization (ATRP) is reported. It has been found that the polymerization kinetics are first-order, the molecular weights increase linearly with conversion, and the molecular weight distribution remains narrow when the polymerization conversion is below 70%. Well-defined P(AcGEA) was obtained, and the O-protecting acetyl groups of P(AcGEA) were quantitatively removed by reacting with dilute CH₃ONa solution in CHCl₃/CH₃OH to afford well-defined poly[(2-β-D -glucopyranosyloxy)ethyl acrylate] (PGEA). © 1999 Society of Chemical Industry     

Fast, multi-responsive microgels based on photo-crosslinkable poly(2-(dimethylamino)ethyl methacrylate)

Multi-responsive microgels based on poly(2-(N,N-dimethylamino)ethyl methacrylate) were developed and their properties were investigated. The primary goal of this research was to speed up the stimulus-response time of the hydrogels to a level usable for actuator applications, by reducing the diffusion distance of water. The gels were prepared by a UV induced photodimerization of a copolymer of 2-(dimethylamino)ethyl methacrylate and 4-cinnamoyl-phenyl methacrylate. Patterning studies showed that these materials can be used as photo-resist materials with high resolution at short exposure times. They showed lower critical solution temperature behavior in water, as well as pH dependent solubility and swelling ratios. While 1 mm thick gels showed response times to temperature and pH-changes of several hours, Si-supported microgels of 300 nm thickness had response times in the range of only a few seconds. The copolymer was prepared by free radical copolymerization, and the reactivity ratios were determined with the extended Kelen Tudos method. Spin-coating of this copolymer on Si supports and subsequent UV-irradiation yielded microgels of variable thickness (200 nm-15 μm), which was determined by confocal scanning laser microscopy. Surface plasmon resonance spectroscopy measurements demonstrated the fast, stimuli-responsive swelling behavior, while differential scanning calorimetry gave insight into the morphology of the networks.     

Block, blocky gradient and random copolymers of 2-ethylhexyl acrylate and acrylic acid by atom transfer radical polymerization

The controlled synthesis of low-T_g poly(2-ethylhexyl acrylate) (P2EHA) and derived random, block and blocky gradient copolymers via atom transfer radical polymerization (ATRP) is described. After optimizing the reaction conditions for the homopolymerization of 2EHA via ATRP, the synthesis of a variety of copolymers with poly(t-butyl acrylate) (PtBuA) was investigated. First, AB-block copolymers were targeted, starting from P2EHA and PtBuA as macroinitiators. Second, random copolymers of tBuA and 2EHA with different monomer ratios were synthesized. Finally, the synthesis of “blocky” gradient copolymers via a one-pot procedure was investigated, starting with the homopolymerization of tBuA, followed by the addition of 2EHA. The hydrolysis of the PtBuA-segments to poly(acrylic acid) (PAA), which was carried out with methanesulfonic acid, resulted in block, blocky gradient and random copolymers consisting of PAA and P2EHA. Solubility testing of the copolymers in slightly basic water (pH ∼ 9) demonstrated that the gradient structure significantly enhances solubility compared to the block copolymer structures with equal composition. The polymers have been characterized by MALDI-TOF MS, GPC and ¹H NMR.     

Surface-initiated atom transfer radical polymerization of polyhedral oligomeric silsesquioxane (POSS) methacrylate from flat silicon wafer

A polyhedral oligomeric silsesquioxane (POSS) methacrylate monomer, i.e. 3-(3,5,7,9,11,13,15-heptacyclopentyl-pentacyclo [9.5.1.1.^3,91.^5,151^7,13]-octasiloxane-1-yl) propyl methacrylate (POSS-MA), was directly grafted from flat silicon wafers using surface-initiated atom transfer radical polymerization (ATRP). Two methods were used to improve the system livingness and control of polymer molecular weights. By ‘adding free initiator’ method, a linear relationship between the grafted poly(POSS-MA) layer thickness and monomer conversion was observed. By ‘adding deactivator’ method, the poly(POSS-MA) thickness increased linearly with reaction time. Poly(POSS-MA) layers up to 40 nm were obtained. The chemical compositions measured by X-ray photoelectron spectroscopy (XPS) agreed well with their theoretical values. Water contact angle measurements revealed that the grafted poly(POSS-MA) was extremely hydrophobic. The surface morphologies of the grafted polymer layers were studied by an atom force microscopy (AFM).     

Modeling and theoretical development in controlled radical polymerization

Controlled radical polymerization (CRP) systems have gained increasing interests for the past two decades. Numerous publications may be found in the literature reporting experimental and modeling work on various CRP processes, including their use in surface modification through grafting. Knowledge of underlying mechanism behind polymerization systems is valuable for product design and process optimization. This information may be obtained through the combination of modeling and experimental studies. In this review, published studies on kinetic and stochastic based modeling for CRP systems are summarized. Their relevance in model discrimination of proposed mechanisms is discussed. This review also includes various parameter estimation studies, that is crucial to obtain accurate simulation predictions. Existing issues on the fundamental mechanism in CRP processes are also addressed.     

端羟基聚丙烯酸异辛酯及聚丙烯酸异辛酯-氨酯的制备及表征

采用原子转移自由基聚合(ATRP)合成了分子量与设计分子量(2000)大小相符的聚丙烯酸异辛酯,再以N-甲基单乙醇胺作为亲核试剂,对活性端基溴进行亲核取代,得到了分子量可控、分子量分布较窄的线型端羟基聚丙烯酸异辛酯。以此为原料与甲苯二异氰酸酯(TDI)反应,制备得到了聚丙烯酸异辛酯-氨酯。利用核磁共振谱(1HNMR)、差示扫描量热仪(DSC)、热重示差扫描量热仪(TGA)对合成的端羟基聚丙烯酸异辛酯及聚丙烯酸酯异辛酯-氨酯的结构、热稳定性等进行了表征。结果表明,利用端羟基聚丙烯酸异辛酯成功地制备了聚丙烯酸异辛酯-氨酯,由凝胶渗透色谱仪(GPC)测得其分子量为10200,玻璃化转变温度为-54℃,是一种新型的丙烯酸酯与聚氨酯的共聚物。     

Preparation and characterization of polyaniline N‐grafted with poly(ethyl acrylate) synthesized via atom transfer radical polymerization

Polyaniline (PANI) N‐grafted with poly(ethyl acrylate) (PEA) was synthesized by the grafting of bromo‐terminated poly (ethyl acrylate) (PEA‐Br) onto the leucoemeraldine form of PANI. PEA‐Br was synthesized by the atom transfer radical polymerization of ethyl acrylate in the presence of methyl‐2‐bromopropionate and copper(I) chloride/bipyridine as the initiator and catalyst systems, respectively. The leucoemeraldine form of PANI was deprotonated by butyl lithium and then reacted with PEA‐Br to prepare PEA‐g‐PANI graft copolymers containing different amounts of PEA via an N‐grafting reaction. The graft copolymers were characterized by Fourier transform infrared spectroscopy, elemental analysis, and thermogravimetric analysis. Solubility testing showed that the solubility of PANI in chloroform was increased by the grafting of PEA onto PANI. The morphology of the PEA‐g‐PANI graft copolymer films was observed by scanning electron microscopy to be homogeneous. The electrical conductivity of the graft copolymers was measured by the four‐probe method. The results show that the conductivity of the PANI decreased significantly with increasing grafting density of PEA onto the PANI backbone up to 7 wt % and then remained almost constant with further increases in the grafting percentage of PEA. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

甲基丙烯酸二乙氨基乙酯的合成

以甲基丙烯酸和草酰氯为原料,配比为n（甲基丙烯酸）：n（草酰氯）=1：1．08,草酰氯法合成了甲基丙烯酰氯：以二乙氨基乙醇与甲基丙烯酰氯为原料,乙醚为溶剂进行酰基化反应,配比为n（甲基丙烯酰氯）：n（二乙氨基乙醇）=1：1．6,冰浴下反应4h,合成了一种用途广泛的多功能单体甲基丙烯酸二乙氨基乙酯（DEAM）,相对于甲基丙烯酰氯的收率为94．4％。     

1,2,3-Triazolium-based poly(acrylate ionic liquid)s

Nitroxide-mediated radical polymerization of a tailor-made acrylate carrying a 1,2,3-triazole group with an undecanoyl spacer affords a well-defined (M_n = 7860 g mol⁻¹ and D = 1.39) neutral polyacrylate precursor. A series of 1,2,3-triazolium-based poly(ionic liquid)s (TPILs) is then obtained by straightforward quaternization of the 1,2,3-triazole groups with methyl iodide and subsequent anion metathesis reactions. Among the prepared materials, TPIL with bis(trifluoromethane)sulfonimide anion exhibits low glass transition temperature (T_g = −40 °C), high thermal stability (T_d10 = 325 °C) and anhydrous ionic conductivity of 4 × 10⁻⁶ S cm⁻¹ at 30 °C, as measured by differential scanning calorimetry, thermogravimetric analysis and broadband dielectric spectroscopy, respectively.     

Diffusion and controlled release characteristics of pH-sensitive poly(2-(dimethyl amino)ethyl methacrylate-co-2-hydroxyethylacrylate) hydrogels

The authors describe a facial development of pH-responsive hydrogels composed of 2-(dimethylamino)ethylmethacrylate and 2-hydroxyethylacrylate via free-radical polymerization at 29°C. The hydrogels were characterized by FTIR, SEM, and XRD studies. The diffusional exponent (n), hydrogel network parameters such as average molecular weight between crosslinks (M_c), and polymer-solvent interaction (χ) were calculated by using swelling data. The hydrogels were encapsulated with 5-fluorouracil, the in vitro release data indicated that the maximum drug release was significantly achieved in pH 1.2 rather than in pH 7.4 and it was enhanced up to 30 h. These results suggested that the gels are highly useful for anticancer drug delivery applications.     

Octadecyl acrylate - Methyl methacrylate block and gradient copolymers from ATRP: Comb-like stabilizers for the preparation of micro- and nano-particles of poly(methyl methacrylate) and poly(acrylonitrile) by non-aqueous dispersion polymerization

Three random and three block copolymers of methyl methacrylate (MMA) and octadecyl acrylate (ODA) were synthesized by atom transfer radical polymerization. These copolymers were assessed for their application as stabilizers in the one-step non-aqueous dispersion (NAD) polymerization of MMA and of acrylonitrile (AN) in a non-polar solvent mixture of hexane and dodecane. In all cases stable spherical micro-particle colloidal dispersions were formed with particle diameters in the range of 62-2725 nm for PMMA. Uniform monodisperse PMMA particles with standard deviations in size distributions of less than 5% were obtained in two cases demonstrating the utility of ODA:MMA copolymers as replacement preformed stabilizers in the one-step synthesis of MMA micro-spheres. Overall the block copolymer PMMA₆₄-block-PODA₃₆ gave greater control over size when varying the solvent:monomer ration than a related gradient PMMA-PODA copolymer. These copolymers were further used as stabilizers in the one-step NAD polymerization of MMA with ethylene glycol dimethacrylate (EGDMA) under similar conditions allowing for the preparation of monodisperse cross-linked PMMA particles with diameters ranging from 110 to 1700 nm. The general utility of the copolymers as stabilizers was demonstrated by the NAD polymerization of acrylonitrile (AN) in non-polar solvent mixture of hexane and dodecane giving ‘crumpled’ latex dispersions with particle diameters in the range 85-483 nm.     

Acetylation of poly(2-hydroxyethyl acrylate) gel beads obtained from sedimentation polymerization

Sedimentation polymerization of an aqueous 2-hydroxyethyl acrylate solution with some crosslinkers was carried out using a simple sedimentation polymerization apparatus to give millimeter-size and very narrow size distributed poly(2-hydroxyethyl acrylate) (PHEA) gel beads. Also, heterogeneous acetylation of the resulting PHEA gel beads with acylating agents such as acetic anhydride, a mixture of acetic anhydride and pyridine, and chloroacetic anhydride was performed under various conditions. The selective esterification of PHEA gel beads proceeded smoothly in toluene from surface to give a novel core-shell type gel consisting of an unreacted core and acetylated shell, and finally afforded almost quantitatively acetylated PHEA gel. The unreacted core became small while maintaining a spherical shape during reaction. The reaction resembled to that of the corresponding cylindrical PHEA gel, and was strongly affected by the network structure of the obtained PHEA gel beads and the reactivity of acylating agents.     

退化转移自由基聚合制备氯丁二烯-丙烯酸丁酯嵌段共聚物

采用退化转移自由基聚合,用溶液聚合和乳液聚合2种方法制备了氯丁二烯-丙烯酸丁酯嵌段聚合物,通过凝胶渗透色谱、核磁共振氢谱及动态光散射仪对聚合物进行了分析。结果表明,用以碘仿作链转移剂的氯丁二烯低温乳液聚合得到的聚氯丁二烯为大分子链转移剂,以偶氮二异丁腈为引发剂,进行丙烯酸丁酯的溶液聚合,制得了氯丁二烯-丙烯酸丁酯嵌段共聚物。用以碘仿作为链转移剂进行氯丁二烯的低温乳液聚合得到的聚氯丁二烯为种子乳液,然后加入第2单体丙烯酸丁酯进行乳液聚合,制得了氯丁二烯-丙烯酸丁酯嵌段聚合物。     

Synthesis of densely grafted copolymers by nitroxide-mediated radical polymerization of styrene using poly(phenylacetylene)s as a macroinitiator

Poly(phenylacetylene)s carrying alkoxyamine moieties in the side chain were prepared by Rh-catalyzed homopolymerization of 1-(4-ethynylphenyl)-1-(2,2,6,6-tetramethyl-1-piperidinyloxyl)ethane (1) and random copolymerization of 1 and 4-methoxy-1-ethynylbenzene (2a) or 4-decyloxy-1-ethynylbenzene (2b). ¹H NMR spectra showed that the poly(phenylacetylene)s adopted a cis-transoid structure. Using the poly(phenylacetylene)s as the macroinitiator the nitroxide-mediated radical polymerization of styrene (St) was carried out at 120 °C to yield densely grafted copolymers as a light yellow powder. The side chain lengths of the graft copolymers were determined by both ¹H NMR and conversion of St, which agreed with each other. The SEC profiles of the graft copolymers were unimodal at low conversions but were not unimodal at high conversion: a shoulder was observed in the high molecular=weight region and a small peak was observed in the low molecular=weight region. ¹H NMR measurements of the graft copolymers indicated that the copolymers adopted a trans-transoid structure, revealing that isomerization from cis-transoid to trans-transoid forms took place during the polymerization of St at 120 °C.     

乙二醇二乙氨基乙基丁基醚存在下的丁二烯负离子聚合

研究了以乙二醇二乙氨基乙基丁基醚(GABE)为调节剂,正丁基锂为引发剂的丁二烯负离子聚合的聚合动力学及聚合物的微观结构。结果表明,随着GABE用量的增加,丁二烯的聚合速率增加,聚丁二烯中1,2-结构质量分数增加,聚合温度升高,聚合速率增加,但聚丁二烯中1,2-结构质量分数有所降低。     

甲基丙烯酸-N,N-2-甲基乙胺酯原子转移自由基聚合动力学研究

A kinetic model was developed to describe the atom transfer radical polymerization (ATRP) of 2-(N,N-dimethylamino) ethyl methacrylate (DMAEMA). The model was based on a polymerization mechanism,which included the atom transfer equilibrium for primary radical, the propagation of growing polymer radical, and the atom transfer equilibrium for the growing polymer radical. An experiment was carried out to measure the conversion of monomer, the number-average molecular weight of polymer and molecular weight distribution for the ATRP process of DMAEMA. The experimental data were used to correlate the kinetic model and rate constants were obtained. The rate constants of activation and deactivation in the atom transfer equilibrium for primary radical are 1.0 x 104 L·mol-1.s-1 and 0.04 L·mol-1.s-1, respectively. The rate constant of the propagation of growing polymer radical is 8.50 L·mol-1.s-1, and the rate constants of activation and deactivation in the atom transfer equilibrium for growing polymer radical are 0.045 L.mol-1.s-1 and 1.2 × 105 L·mol-1.s- 1, respectively. The values of the rate constants represent the features of the ATRP process. The kinetic model was used to calculate the ATRP process of DMAEMA. The results show that the calculations agree well with the measurements.