Synthesis of amphiphilic macrocyclic graft copolymer consisting of a poly(ethylene oxide) ring and multi-poly(?-caprolactone) lateral chains

A series of amphiphilic macrocyclic graft copolymers composed of a hydrophilic poly(ethylene oxide) as ring and hydrophobic poly(?-caprolactone) as lateral chains with different grafting lengths and densities of side chains were prepared by a combination of anionic ring-opening polymerization and coordination-insertion ring-opening polymerization. The anionic ring-opening copolymerization of ethylene oxide (EO) and ethoxyethyl glycidyl ether (EEGE) was carried out first using triethylene glycol and diphenylmethyl potassium (DPMK) as co-initiators, and a linear α,ω-dihydroxyl poly(ethylene oxide) with pendant protected hydroxymethyls (l-poly(EO-co-EEGE)) was obtained. The monomer reactivity ratios of these compounds are r_1(EO) = 1.20 ± 0.01 and r_2(EEGE) = 0.76 ± 0.02, respectively. Then the ring closure of l-poly(EO-co-EEGE) was achieved via an ether linkage by reaction with tosyl chloride (TsCl) in the presence of solid KOH. The crude cyclized product containing the linear chain-extended polymer was hydrolyzed in acidic conditions first and then purified by treating with α-CD. The pure cyclic copolymer of EO and glycidol (Gly) with multipendant hydroxymethyls [c-poly(EO-co-Gly)] as the macroinitiator was used further to initiate the ring-opening polymerization of ?-caprolactone (CL), and a series of amphiphilic macrocyclic graft copolymers c-PEO-g-PCL were obtained. The final products and intermediates were characterized by GPC, NMR and MALDI-TOF in detail.     

Preparation of star copolymers with three arms of poly(ethylene oxide-co-glycidol)-graft-polystyrene and investigation of their aggregation in water

The star graft copolymers with three arms composed of poly(ethylene oxide) (PEO) as main chain and polystyrene (PS) as side chains were prepared by sequential anionic ring-opening copolymerization of ethylene oxide and ethoxyethyl glycidyl ether (EEGE), and then atom transfer radical polymerization (ATRP) of styrene. The anionic ring-opening copolymerization of EO and EEGE was carried out using 2-ethyl-2-hydroxymethyl-1,3-propanediol as trifunctional initiator and diphenylmethyl potassium (DPMK) as deprotonating agent. The resulting three-arm star copolymer [poly(EO-co-EEGE)]₃ could be easily hydrolyzed to unmask the pendant hydroxyl groups without affecting the PEO chains. The switch from the first to the second mechanism was completed by the reaction of the multi-pendant hydroxyl groups of three-arm PEO chain with 2-bromoisobutyryl bromide. The obtained poly(ethylene oxide-co-2-bromoisobutyryloxyglycidyl ether), [poly(EO-co-BiBGE)]₃, was used as macroinitiators to initiate the polymerization of styrene in bulk at 90 °C by ATRP. The final products and intermediates were characterized by NMR, SEC and IR in detail. The amphiphilic star graft copolymers synthesized can form micelles in water. The critical micelle concentration (cmc) determined by fluorescence spectra was about 5 × 10⁻⁷ g/mL. Sphere micelles were observed by transmission electron microscopy (TEM) at low copolymer concentration (6 × 10⁻⁵ g/mL), but the micelle shape became irregular when the copolymer concentration increased to 6 × 10⁻⁴ g/mL.     

Design of novel poly(methyl vinyl ether) containing AB and ABC block copolymers by the dual initiator strategy

A new set of block copolymers containing poly(methyl vinyl ether) (PMVE) on one hand and poly(tert-butyl acrylate), poly(acrylic acid), poly(methyl acrylate) or polystyrene on the other hand, have been prepared by the use of a novel dual initiator 2-bromo-(3,3-diethoxy-propyl)-2-methylpropanoate. The dual initiator has been applied in a sequential process to prepare well-defined block copolymers of poly(methyl vinyl ether) (PMVE) and hydrolizable poly(tert-butyl acrylate) (PtBA), poly(methyl acrylate) (PMA) or polystyrene (PS) by living cationic polymerization and atom transfer radical polymerization (ATRP), respectively. In a first step, the Br and acetal end groups of the dual initiator have been used to generate well-defined homopolymers by ATRP (resulting in polymers with remaining acetal function) and living cationic polymerization (PMVE with pendant Br end group), respectively. In a second step, those acetal functionalized polymers and PMVE-Br homopolymers have been used as macroinitiators for the preparation of PMVE-containing block copolymers. After hydrolysis of the tert-butyl groups in the PMVE-b-ptBA block copolymer, PMVE-b-poly(acrylic acid) (PMVE-b-PAA) is obtained. Chain extension of the AB diblock copolymers by ATRP gives rise to ABC triblock copolymers. The polymers have been characterized by MALDI-TOF, GPC and ¹H NMR.     

Synthesis and characterization of poly(vinyl chloride‐co‐vinyl acetate)‐graft‐poly[(meth)acrylates] by atom transfer radical polymerization

The graft polymerization of methyl methacrylate and butyl acrylate onto poly(vinyl chloride‐co‐vinyl acetate) with atom transfer radical polymerization (ATRP) was successfully carried out with copper(I) thiocyanate/N,N,N′,N′,N″‐pentamethyldiethylenetriamine and copper(I) chloride/2,2′‐bipyridine as catalysts in the solvent N,N‐dimethylformamide. For methyl methacrylate, a kinetic plot of ln([M]₀/[M]) (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) versus time for the graft polymerization was almost linear, and the molecular weight of the graft copolymer increased with increasing conversion, this being typical for ATRP. The formation of the graft polymer was confirmed with gel permeation chromatography, ¹H‐NMR, and Fourier transform infrared spectroscopy. The glass‐transition temperature of the copolymer increased with the concentration of methyl methacrylate. The graft copolymer was hydrolyzed, and its swelling capacity was measured. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 183–189, 2005     

Amphiphilic gradient poly(styrene-co-acrylic acid) copolymer prepared via nitroxide-mediated solution polymerization. Synthesis, characterization in aqueous solution and evaluation as emulsion polymerization stabilizer

A well-defined, amphiphilic poly(styrene-co-acrylic acid) copolymer was synthesized in a single step by nitroxide-mediated controlled free-radical copolymerization of styrene and acrylic acid, without protection of the acid groups: M_n=6500 g mol⁻¹, M_w/M_n=1.5 and a composition of F_AA=0.70±0.03 in acrylic acid. In addition to the good control over molar mass and molar mass distribution, the copolymer exhibited a narrow composition distribution with a slight gradient. Such copolymer was an efficient stabilizer for the emulsion polymerizations of styrene and of mixtures of methyl methacrylate and n-butyl acrylate, until 45 wt% solids. A low amount (typically 3-4 wt% based on the monomer(s)) was needed for a good stabilization. This is approximately a decade lower than the required amount of random, amphiphilic copolymers prepared via conventional free-radical polymerization. The performances were, however, below those of analogous diblock copolymers, but the great advantage is the very easy synthetic procedure.     

Thermal polymerization of methyl (meth)acrylate via reversible addition-fragmentation chain transfer (RAFT) process

Thermal polymerization of methyl (meth)acrylate (MMA) was carried out using 2-cyanoprop-2-yl-1-dithionaphthalate (CPDN) and cumyl dithionaphthalenoate (CDN) as chain transfer agents. The kinetic study showed the existence of induction period and rate retardation, especially in the CDN mediated systems. The molecular weights of the polymers increased linearly with the monomer conversion, and the molecular weight distributions (M_w/M_ns) of the polymers were relatively narrow up to high conversions. The maximum number-average molecular weights (M_ns) reached to 351?900 g/mol (M_w/M_n = 1.47) and 442?400 g/mol (M_w/M_n = 1.29) in the systems mediated by CPDN and CDN, respectively. Chain-extension reactions were also successfully carried out to obtain higher molecular weight PMMA and PMMA-block-polystyrene (PMMA-b-PSt) copolymer with controlled structure and narrow M_w/M_n. Thermal polymerization of methyl acrylate (MA) in the presence of CPDN, or benzyl (2-phenyl)-1-imidazolecarbodithioate (BPIC) also demonstrated “living”/controlled features with the experimented maximum molecular weight 312?500 g/mol (M_w/M_n = 1.57). The possible initiation mechanism of the thermal polymerization was discussed.     

Study of interfacial tension in poly(ethylene oxide)/polystyrene/diblock copolymer system by electric deformation method

We investigated the interfacial tension γ between poly(ethylene oxide) (PEO) and polystyrene (PS) focusing our attention on the dependence of γ on the molecular weight (M) of PEO and the surfactant effect of poly(ethylene oxide-b-styrene) diblock copolymer [P(EO-b-S)]. Measurements of γ were carried out by observing electric deformation of droplets of PEO suspended in bulk PS or in a concentrated solution of PS in dioctylphthalate (DOP). The results indicate that γ between PEO and PS is almost independent of M of PEO in the high molecular weight region, but exhibits a minimum around M = 500. Addition of 1 wt% of P(EO-b-S) to the PEO/PS system causes a decrease of γ due to the surfactant effect of the copolymer, but γ is almost independent of further addition of the copolymer. The decrement of the interfacial tension Δγ increases with increasing molecular weight of P(EO-b-S).     

Polyallene-based graft copolymer via 6-methyl-1,2-heptadien-4-ol and methyl methacrylate

A series of well-defined graft copolymers with a polyallene-based backbone and poly(methyl methacrylate) side chains were synthesized by the combination of living coordination polymerization of 6-methyl-1,2-heptadien-4-ol and atom transfer radical polymerization of methyl methacrylate. We first prepared poly(alcohol) with polyallene repeating units via 6-methyl-1,2-heptadien-4-ol by living coordination polymerization initiated by [(η³-allyl)NiOCOCF₃]₂, followed by transforming the pendant hydroxyl groups into halogen-containing ATRP initiation groups. Next, grafting-from route was used for the synthesis of the well-defined graft copolymer with excellent solubility: poly(methyl methacrylate) was grafted to the backbone via ATRP of methyl methacrylate. This kind of graft copolymer is the first example of graft copolymer via allene derivative and methacrylic monomer.     

Synthesis of novel amphiphilic graft copolymers composed of poly(ethylene oxide) as backbone and polylactide as side chains

A well-defined amphiphilic comb-like copolymer of poly(ethylene oxide)(PEO) as main chain and polylactide (PLA) as side chain was successfully prepared via a combination of anionic polymerization and coordination-insertion ring-opening polymerization. The anionic copolymerization of ethylene oxide (EO) and ethoxyethyl glycidyl ether (EEGE) was carried out using potassium 2-(2-methoxyethoxy)ethoxide as initiator, and then ethoxyethyl groups of EEGE units of the copolymers obtained were removed by hydrolysis. Two copolymers of methoxypoly(ethylene oxide-co-glycidol) [mpoly(EO-co-Gly)] were formed with multiple hydroxyl sites (the molar ratio values of Gly to EO in copolymers: 1/10.6 and 1/5.2; Mn: 10,100 and 5,020 respectively), and them were used further to initiate the ring-opening polymerization of lactide in the presence of stannous octoate, and a well-defined comb-like copolymer of PEO as main chain and PLA as side chain was obtained. The intermediate and final products of PEO-g-PLA were characterized by GPC and NMR in detail.     

Migration of additives in polymer coatings: fluorinated additives and poly(vinylidene chloride)-based matrix

In order to combine the properties of polymers based on vinylidene chloride (VC₂) (barrier properties towards many gases) and fluorinated polymers (low surface energy, improvement of the chemical resistance), a diblock terpolymer poly(VC₂-co-MA)-b-(PFDA) was synthesized by RAFT process. The first block is a statistical copolymer of vinylidene chloride (VC₂) and methyl acrylate (MA) (M_n=6800 g mol⁻¹ and PDI=1.4), the second block is a homopolymer of 1H,1H,2H,2H-perfluorodecyl acrylate (FDA). The diblock terpolymer, when used in a coating formulation based on a poly(VC₂-co-MA) matrix, migrates towards the surface of the coating and fluorinated moieties are located at the surface. The migration of the additive was clearly shown by scanning electron microscopy EDX and by measurements of surface energy, and the influence of the nature of the solvents used to prepare the coating was clearly established. These results indicate that the driving force for the migration is the surface energy of the additive.     

Polyisobutylene-based miktoarm star polymers via a combination of carbocationic and atom transfer radical polymerizations

Poly(isobutylene-b-styrene) (PIB-PS) copolymers and polyisobutylene (PIB) homopolymers were synthesized via quasiliving carbocationic polymerization from the initiator 3,3,5-trimethyl-5-chlorohexyl acetate, which contains a protected hydroxyl group. The PIB block was created at −70 °C in a methylcyclohexane/methyl chloride (60:40) cosolvent system, using TiCl₄ as co-initiator, followed optionally by sequential addition of styrene. Using a strong base, the acetate head group of the resulting block copolymer was cleaved to yield a hydroxyl group, which was subsequently esterified with the branching agent 2,2-bis((2-bromo-2-methyl)propionatomethyl)propionyl chloride (BPPC) to create dual initiating sites for atom transfer radical polymerization (ATRP). ATRP of tert-butyl acrylate was carried out using a Cu(I)Br/1,1,4,7,7-pentamethyldiethylenetriamine (PMDETA) catalyst system. In some cases, the ester side chains of the poly(tert-butyl acrylate) (PtBA) blocks were cleaved to create poly(acrylic acid) (PAA) blocks. The final miktoarm star polymers had compositions that were very close to theoretical.     

Synthesis of linear tetrablock quaterpolymers via atom transfer radical polymerization and a click coupling approach

We report the synthesis of a well-defined linear tetrablock quaterpolymer of poly(butyl acrylate)-b-polystyrene-b-poly(methyl acrylate)-b-poly(methyl methacrylate) by combining atom transfer radical polymerization (ATRP) and a click coupling approach. For this purpose, polystyrene-b-poly(butyl acrylate) (AB) was prepared by ATRP using macroinitiator as α-trimethylsilyl(TMS)-alkyne ω-bromo polystyrene. The α-(TMS) end of the AB diblock copolymer was deprotected using tetrabutylammonium fluoride (TBAF) in THF. The ω-azide end of the CD diblock copolymer was made from poly(methyl methacrylate)-b-poly(methyl acrylate) (CD) via transformation of the bromine chain end by a simple nucleophilic substitution reaction with NaN₃ in DMF. Click coupling between the ω-azide end in CD diblock copolymer with the α-alkyne end in the AB diblock copolymer was then performed by Cu¹-catalyzed (3+2) cycloaddition. Gel permeation chromatography (GPC), FT-IR and ¹H NMR spectroscopy confirmed the successful formation of a linear ABCD tetrablock copolymer via ATRP and click coupling.     

A novel perfluorocyclobutyl aryl ether-based graft copolymer via 2-methyl-1,4-bistrifluorovinyloxybenzene and styrene

A series of novel perfluorocyclobutyl aryl ether-containing graft copolymers with polystyrene side chains were synthesized by the combination of thermal step-growth [2π + 2π] cycloaddition polymerization of aryl bistrifluorovinyl ether monomer and atom transfer radical polymerization (ATRP) of styrene. We first synthesized a new aryl bistrifluorovinyl ether monomer of 2-methyl-1,4-bistrifluorovinyloxybenzene in two steps using commercially available 2-methylhydroquinone as starting material and the corresponding perfluorocyclobutyl aryl ether-based homopolymer with methoxyl end groups was prepared through the homopolymerization of this monomer in diphenyl ether. Next, the pendant methyls of this fluoropolymer were mono-brominated by N-bromosuccinimide and benzoyl peroxide so as to be converted to ATRP initiation groups. The targeted poly(2-methyl-1,4-bistrifluorovinyloxybenzene)-g-polystyrene with relatively narrow molecular weight distributions (M_w/M_n ≤ 1.38) was obtained by the combination of bulk ATRP of styrene at 110 °C using CuBr/bpy as catalytic system and the grafting-from strategy. These fluorine-containing graft copolymers show excellent solubility in common organic solvents.     

Synthesis of comb-shaped copolymers by combination of reversible addition-fragmentation chain transfer polymerization and cationic ring-opening polymerization

Comb-shaped graft copolymers with poly(methyl acrylate) as a handle were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization and ring-opening polymerization (ROP) techniques in three steps. First, copolymers of poly(styrene-co-chloromethyl styrene), poly(St-co-CMS), were prepared by RAFT copolymerization of St and CMS using 1-(ethoxycarbonyl)prop-1-yl dithiobenzoate (EPDTB) as RAFT agent. Second, the polymerization of MA using poly(St-co-CMS)-SC(S)Ph as macromolecular chain transfer agent produced block copolymer poly(St-co-CMS)-b-PMA. Third, cationic ring-opening polymerization of THF was performed using poly(St-co-CMS)-b-PMA/AgClO₄ as initiating system to produce comb-shaped copolymers. The structures of the poly(St-co-CMS), poly(St-co-CMS)-b-PMA and final comb-shaped copolymers were characterized by ¹H NMR spectroscopy and gel permeation chromatography (GPC).     

Poly(tert-butyl acrylate-b-isobutylene-b-styrene) terpolymer from a carbocationic initiator containing a latent radical initiating site

A poly(isobutylene-b-styrene) (PIB-PS) copolymer was synthesized via quasi-living carbocationic polymerization from an initiator containing a latent site for atom transfer radical polymerization (ATRP) initiation. The initiator, 3,3,5-trimethyl-5-chlorohexyl acetate (TMCHA), was synthesized in four steps from methyl 3,3-dimethyl-4-pentenoate. The PIB block was created at −70 °C in a methylcyclohexane/methyl chloride (60:40) cosolvent system, using TiCl₄ as the catalyst, followed by sequential addition of styrene. The acetate head group of the resulting block copolymer was converted to a hydroxyl group using a strong base and subsequently esterified with 2-bromopropionyl bromide to create an initiating site for ATRP of tert-butyl acrylate, which was carried out using a Cu(I)Br/1,1,4,7,7,-pentamethyl-diethylenetriamine (PMDETA) catalyst system. The final terpolymers had compositions that were very close to theoretical.     

Amphiphilic cylindrical brushes with poly(acrylic acid) core and poly(n-butyl acrylate) shell and narrow length distribution

Core-shell cylindrical polymer brushes with poly(t-butyl acrylate)-b-poly(n-butyl acrylate) (PtBA-b-PnBA) diblock copolymer side chains were synthesized via ‘grafting from’ technique using atom transfer radical polymerization (ATRP). The formation of well-defined brushes was confirmed by GPC and ¹H NMR. Multi-angle light scattering (MALS) measurements on brushes with 240 arms show that the radius of gyration scales with the degree of polymerization of the side chains with an exponent of 0.57±0.05. The hydrolysis of the PtBA block of the side chains resulted amphiphilic cylindrical core-shell nanoparticles. In order to obtain a narrow length distribution of the brushes, the backbone, poly(2-hydroxyethyl methacrylate), was synthesized by anionic polymerization in addition to ATRP. The characteristic core-shell cylindrical structure of the brush was directly visualized on mica by scanning force microscopy (SFM). Brushes with 1500 block copolymer side chains and a length distribution of l_w/l_n=1.04 at a total length l_n=179 nm were obtained. By choosing the proper solvent in the dip-coating process on mica, the core and the shell can be visualized independently by SFM.     

Synthesis of PAA-g-PNIPAM well-defined graft polymer by sequential RAFT and SET-LRP and its application in preparing size-controlled super-paramagnetic Fe3O4 nanoparticles as a stabilizer

A series of well-defined double hydrophilic graft copolymers, poly(acrylic acid)-g-poly(N-isopropylacrylamide) (PAA-g-PNIPAM), was employed as a novel water-soluble coating for constructing superparamagnetic iron oxide nanoparticles. The copolymer was synthesized via a three-step procedure: firstly, a well-defined hydrophobic PtBA-based backbone, poly(tert-butyl 2-((2-chloropropanoyloxy)-methyl)acrylate)-co-poly(tert-butyl acrylate), (PtBCPMA₁₉-co-PtBA₁₈), was prepared through RAFT copolymerization of a new trifunctional acrylic monomer, tert-butyl 2-((2-chloropropanoyloxy)methyl)acrylate and tert-butyl acrylate; secondly, taking this backbone as a macroinitiator to initiate SET-LRP of N-isopropylacrylamide resulted in well-defined (poly(tert-butyl 2-((2-chloropropanoyloxy)methyl)-acrylate)-co-poly(tert-butyl acrylate))-g-poly(N-isopropylacrylamide) ((PtBCPMA-co-PtBA)-g-PNIPAM) amphiphilic graft copolymers with relatively narrow polydispersities (M_w/M_n ≤ 1.31); thirdly, handling (PtBCPMA-co-PtBA)-g-PNIPAM in acidic conditions afforded PAA-g-PNIPAM graft copolymers. The resulting PAA-g-PNIPAM copolymers were directly utilized as a polymeric stabilizer in the preparation of superparamagnetic Fe₃O₄ nanoparticles. The particle size can be readily tuned in the range of 12.1–23.2 nm by varying the amount of PAA-g-PNIPAM copolymer or the length of PNIPAM side chain. Besides, the structure and properties of prepared Fe₃O₄/polymer nanocomposites were characterized by XRD, FT-IR, TGA, TEM, and magnetic measurement in detail.     

Synthesis and properties of polymer brush consisting of poly(phenylacetylene) main chain and poly(dimethylsiloxane) side chains

A novel polymer brush consisting of poly(phenylacetylene) (PPA) main chain and poly(dimethylsiloxane) (PDMS) side chains was synthesized by the polymerization of phenylacetylene-terminated PDMS macromonomer (M-PDMS). The macromonomer was prepared by the esterfication of monohydroxy-ended PDMS (PDMS-OH, degree of polymerization (DP) = 42) with p-ethynylbenzoic acid. The polymerization of M-PDMS using [(nbd)RhCl]₂/Et₃N catalyst led to polymer brush, poly(M-PDMS), with M_n up to 349?000 (DP of main chain 104). Poly(M-PDMS) with narrow molecular weight distribution (M_n = 39?900, M_w/M_n = 1.11) was obtained with a vinyl-Rh catalyst, [Rh{C(Ph)CPh₂}(nbd){P(4-FC₆H₄)₃}]/(4-FC₆H₄)₃P. Poly(M-PDMS)s were brown to orange viscous liquids and soluble in organic solvents such as toluene and CHCl₃. The UV-vis absorptions of poly(M-PDMS) were observed in the range of 350-525 nm, which are attributable to the PPA main chain.     

Synthesis of poly[dimethylsiloxane-block-oligo(ethylene glycol) methyl ether methacrylate]: an amphiphilic copolymer with a comb-like block

AB amphiphilic comb-like block copolymers of poly(oligo[ethylene glycol] methyl ether methacrylate) and polydimethylsiloxane were synthesised with a methodology based on atom transfer radical polymerization (ATRP). The anionic ring opening polymerisation of hexamethylcyclotrisiloxane followed by reaction with 3-(chlorodimethylsilyl) propyl 2-bromo-2-methylpropanoate propyldimethylchlorosilane gave suitable macroinitiators for the ATRP of oligo[ethylene glycol] methyl ether methacrylate. The latter synthetic procedure was optimised by performing a number of syntheses varying the reaction solvent, catalytic complex and the temperature used. Copolymers with relatively high polydispersity indices (M_w/M_n>1.3) could be synthesised at room temperature by employing a Cu(I)Br:N,N,N′,N′,N″-pentamethyldiethylenetriamine complex in n-propanol with Cu(II)Br. The optimum reaction conditions employed a Cu(I)Cl:N-(n-propyl)-2-pyridyl(methanimine) complex with an n-propanol/water mixture or toluene as solvent at 90 °C. This gave block copolymers of the desired molecular weights and polydispersity indices of less than 1.1. The block copolymers were characterised with ¹H NMR and ¹³C NMR spectroscopy and size exclusion chromatography.     

Synthesis and thermal properties of poly(methyl methacrylate)‐poly(L‐lactic acid)‐poly(methyl methacrylate) tri‐block copolymer

Poly(methyl methacrylate)‐poly(L ‐lactic acid)‐poly(methyl methacrylate) tri‐block copolymer was prepared using atom transfer radical polymerization (ATRP). The structure and properties of the copolymer were analyzed using infrared spectroscopy, gel permeation chromatography, nuclear magnetic resonance (¹H‐NMR, ¹³C‐NMR), thermogravimetry, and differential scanning calorimetry. The kinetic plot for the ATRP of methyl methacrylate using poly(L ‐lactic acid) (PLLA) as the initiator shows that the reaction time increases linearly with ln[M]₀/[M]. The results indicate that it is possible to achieve grafted chains with well‐defined molecular weights, and block copolymers with narrowed molecular weight distributions. The thermal stability of PLLA is improved by copolymerization. A new wash‐extraction method for removing copper from the ATRP has also exhibits satisfactory results. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012