Improved image quality of a high‐transflective tRGB‐t/rW TFT‐LCD

Abstract— This work combines a very simple resolution rescaling method, a well‐known RGB‐to‐YUV converting technique and a detection strategy into an optimized switchable mechanism in order to eliminate the problems of obvious zigzag profiles caused by the special layouts of transflective tRGB‐t/rW TFT‐LCDs and the poor reflective gray‐level contrast ratio effected by the minimum white data in the transmissive RGB‐W + subpixel rendering algorithms. Finally, a transflective tRGB‐t/rW TFT‐LCD is revealed not only to have no visible zigzag profiles and high visibility of reflective gray‐level contrast ratio, but also to have extreme reflectance and transmittance. The excellent optical performance of the proposed system makes it particularly suitable for single‐panel applications that need both high‐transmissive main displays and high‐reflective subdisplays.     

A novel pixel memory using integrated voltage‐loss‐compensation (VLC) circuit for ultra‐low‐power TFT‐LCDs

Abstract— A novel pixel memory using an integrated voltage‐loss‐compensation (VLC) circuit has been proposed for ultra‐low‐power TFT‐LCDs, which can increase the number of gray‐scale levels for a single subpixel using an analog voltage gray‐scale technique. The new pixel with a VLC circuit is integrated under a small reflective electrode in a high‐transmissive aperture‐ratio (39%) 3.17‐in. HVGA transflective panel by using a standard low‐temperature‐polysilicon process based on 1.5‐μm rules. No additional process steps are required. The VLC circuit in each pixel enables simultaneous refresh with a very small change in voltage, resulting in a two‐orders‐of‐magnitude reduction in circuit power for a 64‐color image display. The advanced transflective TFT‐LCD using the newly proposed pixel can display high‐quality multi‐color images anytime and anywhere, due to its low power consumption and good outdoor readability.     

Transflective twisted‐nematic liquid‐crystal display with double twisted‐nematic cell and twisted liquid‐crystal retarder

Abstract— Two configurations, (i) a double‐cell‐gap twisted nematic (DTN) liquid‐crystal display (LCD) and (ii) a single‐cell‐gap twisted‐nematic (TN) liquid‐crystal display (LCD) using a twisted LC retarder, were optimized for transflective liquid‐crystal displays. For the DTN configuration, both the single‐cell‐gap approach and the double‐cell‐gap approach were considered. The optimized configurations exhibit a high contrast ratio, wide viewing angles, and achromatic (black/white) switching in both the transmissive and reflective modes. They are easy to fabricate and also possess a perfect dark state. Both are suitable for high‐quality transflective TFT‐LCDs.     

A dual‐gap RGBW transflective TFT‐LCD with adjustable color gamut

Abstract— An adjustable‐color‐gamut dual‐gap RGBW transflective liquid‐crystal display that uses a four‐color manufacturing process and a color‐processing algorithm to achieve the appropriate color performance in both the transmissive and reflective modes is presented. Based on superior‐color‐transformation units, the total brightness and color gamut can be modified under different ambience. The highest NTSC color gamut in the reflective mode (reflectance, 4.4%) that has been fabricated successfully for a RGBW 1.5‐in. dual‐gap panel is 23% with a 7%, 17%, and 40% NTSC color gamut in the transmissive mode by using different algorithms. Compared to a typical RGB panel, it not only provides flexibility for any environment but also satisfies a variety of personal requirements. Based on personal preference, users have more choices to adjust the LCD settings such as color saturation, brightness, etc. The smart RGBW TRLCD will definitely become the developing trend towards sunlight‐readable LCDs in the near future.     

Full‐color transflective cholesteric LCD with image‐enhanced reflector

Abstract— A full‐color bistable transflective cholesteric liquid‐crystal display (Ch‐LCD) was demonstrated by using an imbedded image‐enhanced reflector (IER) on top of each transmissive subpixel. The RGB colors were achieved by patterning conventional color filters on a black‐and‐white Ch‐LCD. In addition, the IER on top of each transmissive subpixel provides similar paths for the transmissive backlight and the reflected ambient light. A simple transflective Ch‐LCD was demonstrated.     

Transflective IPS‐LCD with improved reflective contrast ratio

Abstract— In order to improve the reflective contrast ratio of transflective IPS‐LCDs, a novel pixel design for a normally white reflective IPS has been proposed. In this design, the large‐inter‐electrode‐spacing layout using a novel driving method and a double‐layered electrode have effectively reduced the light leakage. By applying these two technologies, a transflective IPS‐LCD has been successfully demonstrated with a high contrast ratio (15:1) in the reflective mode and a wide‐viewing‐angle characteristic in the transmissive mode.     

Transflective ferroelectric liquid‐crystal display with a single‐cell gap

Abstract— A ferroelectric liquid‐crystal (FLC) display was optimized as a transflective liquid‐crystal display (LCD). In this configuration, the single‐cell‐gap approach was considered. The optimized configuration exhibits a high contrast ratio, wide viewing angles, and achromatic (black/white) switching in both the transmissive and reflective modes. Because no double‐cell‐gap structure, no subpixel separation, and no patterning polarizers and retarders are included in the configuration, the configuration is easy to fabricate and also possess a perfect dark state. This configuration is also suitable for bistable applications.     

Next‐generation mobile LCDs with in‐cell retarders

Abstract— In‐cell retarders can be a major breakthrough for mobile LCDs. When a patterned in‐cell retarder replaces the external retarders on transflective LCDs, brighter and thinner transflective LCDs with lower power consumption and wider viewing angle can be obtained. Additionally, when in‐cell retarders are applied in reflective LCDs, the thickness of the LCD is considerably reduced without affecting the optical performance of the reflective LCD. This paper presents the technology needed to make in‐cell retarders and the performance of reflective and transflective LCDs with in‐cell retarders.     

Single‐cell‐gap transflective liquid‐crystal display and the use of photoalignment technology

Abstract— In this paper, transflective liquid‐crystal‐display (LCD) technology will be reviewed, and several new single‐cell‐gap transflective LCD configurations are proposed. Photoalignment technology is studied especially for transflective‐LCD applications. In order to realize the optimal performance of the display as well as a matched transmittance/reflectance voltage curve (TVC/RVC) for the transflective configurations, two different single‐cell‐gap transflective‐LCD approaches will be discussed. The first one is the dual‐mode single‐cell‐gap approach, in which different liquid‐crystal modes are applied to the transmissive and reflective subpixels of the transflective LCD. The other approach is the single‐mode s ingle‐cell‐gap approach, in which an in‐cell retardation film is applied to adjust the performance and TVC/RVC matching of a transflective LCD. Photoalignment technology is used to fabricate the dual‐mode liquid‐crystal cell in the first approach and also the in‐cell retardation film in the second approach. Prototypes of the proposed configurations have been fabricated, which show good performance and a matched TVC/RVC.     

A new driving method to compensate for row‐line signal‐propagation delays in an AMLCD

Abstract— The row‐line and data‐line that make up of a TFT‐LCD panel can be modeled as a distributed resistance and capacitance network. As TFT‐LCD panels become larger and provide higher resolution, the induced signal propagation delay time from the row and column lines become an appreciable part of the line time. In particular, the row signal‐propagation delay time is traditionally accommodated by waiting for the worst‐case propagation time before the start of a new line. This conventional method, however, reduces the subpixel charging time. A new driving method, Horizontal Line Delay Compensation (H‐LDC), has been implemented and verified to compensate for row‐line propagation delay. The benefit of longer subpixel charging time is of particular interest to large‐area high‐resolution fast‐refresh‐rate LCD TVs.     

Electrical models of TFT‐LCD panels for circuit simulations

Abstract— As thin‐film‐transistor liquid‐crystal‐display (TFT‐LCD) panels become larger and provide higher resolution, the propagation delay of the row and column lines, the voltage modulation of Vcom, and the response time of the liquid crystal affect the display images now more than in the past. It is more important to understand the electrical characteristics of TFT‐LCD panels these days. There are several commercial products that simulate the electrical and optical performance of TFT‐LCDs. Most of the simulators are made for panel designers. However, this research is for circuit, system, and panel designers. It is made in a SPICE and Cadence environment as a commercial circuit‐design tool. For circuit and system designers, it will help to design the circuit around a new driving method. Also, it can be easily modified for every situation. It also gives panel designers design concepts. This paper describes the electrical model of a 15‐in. XGA (1024 × 768) TFT‐LCD panel. The parasitic resistance and capacitance of the panel are obtained by 3‐D simulation of a subpixel. The accuracy of these data is verified by the measured values of an actual panel. The developed panel simulation platform, the equivalent circuit of a 1 5‐in. XGA panel, is simulated by HSPICE. The results of simulation are compared with those of experiment, according to changing the width of the OE signal. The proposed simulation platform for modeling TFT‐LCD panels can be especially applied to large‐sized LCD TVs. It can help panel and circuit designers to verify their ideas without making actual panels and circuits.     

A dual‐cell‐gap transflective liquid‐crystal display with identical response time in transmissive and reflective regions

Abstract— A dual‐cell‐gap transflective liquid‐crystal display (TR‐LCD) with identical response time in both the transmissive and reflective regions is demonstrated. In the transmissive region, strong anchoring energy is used to decrease the response time, while in the reflective region, weak anchoring energy is used to increase the response time. And overdrive voltage technology is adopted to make the response time identical in both the transmissive and reflective regions. The device structure and operating principle of the TR‐LCD was analyzed, the anchoring energy in the transmissive and reflective regions was designed, and the response time and electro‐optic characteristics of the TR‐LCD was calculated. The simulated dual‐cell‐gap TR‐LCD demonstrated good performances.     

LED‐backlight feedback control system with integrated amorphous‐silicon color sensor on an LCD panel

Abstract— Thin‐film‐transistor liquid‐crystal displays (TFT‐LCDs) have the largest market share of all digital flat‐panel displays. An LCD backlighting system employing a three‐color red‐green‐blue light‐emitting diode (RGB‐LED) array is very attractive, considering its wide color gamut, tunable white point, high dimming ratio, long lifetime, and environmental compatibility. But the high‐intensity LED has problems with thermal stability and degradation of brightness over time. Color and white luminance levels are not stable over a wide range of temperature due to inherent long‐term aging characteristics. In order to minimize color point and brightness differences over time, optical feedback control is the key technology for any LED‐backlight system. In this paper, the feasibility of an optical color‐sensing feedback system for an LED backlight by integrating the amorphous‐silicon (a‐Si) color sensor onto the LCD panel will be presented. To minimize the photoconductivity degradation of a‐Si, a new laser exposure treatment has been applied. The integrated color‐sensor optical‐feedback‐controlled LED‐backlight system minimized the color variation to less than 0.008 Δu'v' (CIE1976) compared to 0.025 for an open‐loop system over the temperature range of 42–76°C.     

Advanced IPS technology for mobile applications

Abstract— In‐plane‐switching LCD (IPS‐LCD) technologies originally developed for LCD monitors and TV applications are applied to mobile applications. Advantages of the IPS mode over other optical modes for mobile applications are quantitatively clarified. The panel achieves stable color reproduction and chromaticity in the viewing‐angle range for mobile displays. Superiority of the IPS mode over other optical modes is discussed also from the viewpoints of stability in chromaticity during the brightness change and the driving power consumption. A transflective IPS mode with good performance is accomplished by the use of a proper optical design. A new structure, IPS‐Pro, which enables sunlight readability by increasing the transmittance, i.e., the brightness of the panel, without additional cost and power consumption in contrast to additional fabrication processes required to fabricate the transflective mode is realized. Furthermore, to improve the users' convenience, an automatic luminance control system and a controllable viewing‐angle device are developed. The panels developed fulfill the market requirements of increasing the function and performance variations and will be the most appropriate ones to be applied to mobile appliances, such as cellular phones, digital still cameras, music players, GPS, mobile TV sets, etc.     

A single‐cell‐gap transflective LCD using active‐level‐shift technology

Abstract— A single‐cell‐gap transflective LCD using active‐level‐shift (ALS) technology has been developed and is presented. An efficient pixel architecture has recently been designed to apply different voltages on transmissive and reflective subpixels through two separated storage capacitors, formed by a boosting electrode and pixel electrodes. A 2.2‐in. vertical‐alignment‐mode (VA) transflective LCD prototype with a similar gamma for both the transmissive and reflective areas was obtained. Compared to a conventional dual‐cell‐gap design, the new single‐cell‐gap design achieves a 17% higher aperture ratio and the contrast increased from 200:1 to 500:1.     

Development of “Advanced TFT‐LCD” with good legibility under any ambient light intensity

A new LCD referred to as an “Advanced TFT‐LCD” has been developed. It consists of both transmissive and reflective electrodes in every pixel. Its subjective legibility and characteristics, such as contrast ratio, color gamut, and luminance, have been investigated at several ambient illumination intensities. As a result, it was confirmed that Advanced TFT‐LCDs offer better legibility than transmissive LCDs under any ambient illumination intensity.     

Double‐faced TFT‐LCD having one LC panel and one lighting system

Abstract— We have developed a novel liquid‐crystal‐display (LCD) system referred to as a “Double‐Faced LCD.” It has only one LC panel and one lighting system, but it works not only as a transmissive‐type LCD from one side but also as a reflective‐type LCD from the other side. Therefore, the thickness and the weight of the Double‐Faced LCD can be reduced compared to those of conventional LC modules that have two LC panels and two lighting systems.     

Switchable transmissive and reflective liquid‐crystal display using a multi‐domain vertical alignment

Abstract— A wide‐view transflective liquid‐crystal display (LCD) capable of switching between transmissive and reflective modes in response to different ambient‐light conditions is proposed. This transflective LCD adopts a single‐cell‐gap multi‐domain vertical‐alignment (MVA) cell that exhibits high contrast ratio, wide‐viewing angle, and good light transmittance (T) and reflectance (R). Under proper cell optimization, a good match between the VT and VR curves can also be obtained for single‐gamma‐curve driving.     

Latest developments for “system‐on‐glass” displays using low‐temperature poly‐Si TFTs

Abstract— A 2.3‐in.‐diagonal QVGA‐formatted “System‐On‐Glass” display has been developed by using low‐temperature poly‐Si TFT‐LCD technology. This display fully integrates 6‐bit RGB digital interface drivers as well as all the power supply circuitry to drive the LCD, which requires neither external driver ICs nor power‐supply ICs. This paper discusses the newly developed TFT circuit technologies used in this LCD. The development trend of the “System‐On‐Glass” display is also reviewed.     

DIA‐PDP with high luminous efficacy and increased vertical resolution

Abstract— A PDP utilizing a new cell configuration to improve the vertical resolution and luminous efficacy is proposed. In this configuration, a delta subpixel arrangement is adopted because it reduces the vertical pixel pitch by half and increases the vertical resolution. In this configuration, R, G, B subpixels form triangles which are diamond shaped, the rational for calling this technology “DIAPDP.” High luminous efficacy is achieved by reducing the reflectivity of the panel. The lower reflectivity enables increased transmittivity of the light‐reduction filter which is part of the PDP panel, thus ensuing sufficient contrast under bright conditions. The higher transmittivity increases the luminous efficacy with the filter. Results obtained for a 46‐in. panel demonstrate a 33% increase in the luminous efficacy when using the filter. The DIA cell configuration is further modified to be a “clustered DIA” in order to improve the color mixing. Through subjective evaluation, the color mixing was compared with that of panels based on a trio subpixel arrangement and DIA, and the effect on color mixing was confirmed. The luminous efficacy of clustered DIA is also shown to be equal to that of DIA.