White‐LED backlight control for motion‐blur reduction and power minimization in large LCD TVs

Abstract— A 1‐D LED‐backlight‐scanning technique and a 2‐D local‐dimming technique for large LCD TVs are presented. These techniques not only reduce the motion‐blur artifacts by means of impulse representation of images in video, but also increase the static contrast ratio by means of local dimming in the image(s). Both techniques exploit a unique feature of an LED backlight in large LCD TVs in which the whole panel is divided into a pre‐defined number of regions such that the luminance in each region is independently controllable. The proposed techniques are implemented in a Xilinx FPGA and demonstrated on a Samsung 40‐in. LCD TV. Measurement results show that the proposed techniques significantly reduce the motion‐blur artifacts, enhance the static contrast ratio by about 3×, and reduce the power consumption by 10% on average.     

Guiding principles for high‐quality moving picture in LCD TVs

Abstract— The moving‐picture quality of several LCD modules was evaluated by using the quantitative parameter, normalized blurred edge width (N‐BEW), or the N‐BEW value normalized by time (N‐BET), measured and calculated by the developed time‐sequence‐image integration system which has taken LCD‐response characteristics and human‐vision characteristics into consideration. The quality of several LCD TVs is also discussed by using subjective evaluation and the unified quantitative parameter moving‐picture response time (MPRT), which is based on N‐BEW. According to the experimental and calculated results, it is clear that the value of N‐BET can express moving‐picture quality, which depends on the liquid‐crystal response time and the hold‐type character of LCDs. Also, it is confirmed that the value of MPRT can express the moving‐picture quality by comparison with subjective evaluation. The target values of MPRT and N‐BET for the motion‐blur‐less picture are deduced by extrapolating the subjective evaluation results. Then, guidelines to improve the moving picture quality are demonstrated.     

Evaluation of motion performance on scanning‐backlight LCDs

Abstract— The scanning‐backlight technique to improve the motion performance of LCDs is introduced. This technique, however, has some drawbacks such as double edges and color aberration, which may become visible in moving patterns. A method combining accurate measurements of temporal luminance transitions with the simulation of human‐eye tracking and spatiotemporal integration is used to model the motion‐induced profile of an edge moving on a scanning‐backlight LCD‐TV panel that exhibits the two drawbacks mentioned above. The model results are validated with a perception experiment including different refresh rates, and a high correspondence is found between the simulated apparent edge and the one that is perceived during actual motion. Apart from the motion‐induced edge blur, the perception of a moving line or square‐wave grating can also be predicted by the same method starting from the temporal impulse and frame‐sequential response curves, respectively. Motion‐induced image degradation is evaluated for both a scanning‐ and continuous‐backlight mode based on three different characteristics: edge blur, line spreading, and modulation depth of square‐wave grating. The results indicate that the scanning‐backlight mode results in better motion performance.     

Evaluation of liquid‐crystal‐display motion blur with moving‐picture response time and human perception

Abstract— The moving‐picture response time (MPRT) for measuring liquid‐crystal‐display (LCD) motion blur was studied by several organizations in 2001. To determine the LCD motion blur that humans perceive, subjective evaluation experiments using the method of adjustment was conducted to find a strong correlation between perceived motion blur and extended blurred edge time (EBET) of the MPRT measurements. MPRT thus clearly indicates the degree of which humans perceive motion blur.     

Motion‐blur characterization with simulation method for mobile LCDs

Abstract— A simulation method based on measured liquid‐crystal responses and human‐vision properties was proposed to characterize the motion blur of LCDs. A perceptual experiment was implemented to validate the simulation model within different viewing conditions by changing the visual angle. The results indicate that the smaller visual angle of the mobile display has no statistic significant effect on smooth‐pursuit eye tracking when perceiving a moving block on a screen. The calculation process of quantitative metric was presented based on the measured light behavior and the simulation model. In the end, the different motion‐blur reduction approaches were evaluated for mobile LCDs.     

Effect of moving pictures on visual task performance and fatigue using 4K OLED and LCD TVs

This study compared the effects of 4K organic light‐emitting diode (OLED) and liquid‐crystal display (LCD) TVs on human visual task performance and fatigue when viewing moving pictures. In experiments conducted, subjects were asked to locate 35 icons among a total of 276 on‐screen icons at four moving picture speeds. From the results obtained, it was determined that OLED TVs (emissive type) exhibit superior characteristics for hit rate and false alarm rate compared with LCD TVs (non‐emissive‐type). The evaluation results of a simulator sickness questionnaire administered to ascertain fatigue levels also indicated that OLED TVs induce relatively little fatigue at fast‐moving picture speeds of 10 ppf or more compared with LCD TVs. Thus, this study confirms that OLED TVs, given their ultrafast response time characteristics, are superior in terms of moving picture images to LCD TVs.     

Modeling motion‐induced color artifacts from the temporal step response

Abstract— LCD motion blur is a well‐known phenomenon, and a lot of research is attributed to characterize and improve it. Until recently, most studies were focused on explaining the effects visible in black‐and‐white patterns, and hence color effects were ignored. However, when a colored pattern is moving over a colored background, an additional motion‐induced artifact becomes visible, which is referred to as chromatic aberration. To describe this phenomenon, our model to characterize the appearance of moving achromatic patterns is extended in such a way that it now calculates the apparent image from the temporal step response of the individual primary colors. The results of a perception experiment indicate that there is a good correspondence between the apparent image predicted with the model and the actual image perceived during motion.     

Motion‐blur characterization on liquid‐crystal displays

Abstract— In this paper, several methods to characterize motion blur on liquid‐crystal displays are reviewed. Based on the assumptions of smooth‐pursuit eye tracking and one‐frame temporal luminance integration, a simple algorithm has been proposed to calculate the normalized blurred edge width (N‐BEW) and motion‐picture response time (MPRT) with a one‐frame‐time moving‐window function to LC temporal step response curves. A custom measurement system with a fast‐eye‐sensitivity‐compensated photodiode has been developed to characterize motion blur based on LC response curves (LCRCs). MPRT values obtained by using the algorithm mentioned above and those from the smooth‐pursuit‐camera methods agree. Perception experiments were conducted to validate the correspondence between the simulated results and actual perceived images by the human eyes. In addition, the insufficiency of MPRT to evaluate motion blur on impulse‐type light‐generation LCDs, by analyzing the measurement results of a scanning backlight LCD, is discussed.     

Perceptually‐motivated Real‐time Temporal Upsampling of 3D Content for High‐refresh‐rate Displays

High‐refresh‐rate displays (e. g., 120 Hz) have recently become available on the consumer market and quickly gain on popularity. One of their aims is to reduce the perceived blur created by moving objects that are tracked by the human eye. However, an improvement is only achieved if the video stream is produced at the same high refresh rate (i. e. 120 Hz). Some devices, such as LCD TVs, solve this problem by converting low‐refresh‐rate content (i. e. 50 Hz PAL) into a higher temporal resolution (i. e. 200 Hz) based on two‐dimensional optical flow. In our approach, we will show how rendered three‐dimensional images produced by recent graphics hardware can be up‐sampled more efficiently resulting in higher quality at the same time. Our algorithm relies on several perceptual findings and preserves the naturalness of the original sequence. A psychophysical study validates our approach and illustrates that temporally up‐sampled video streams are preferred over the standard low‐rate input by the majority of users. We show that our solution improves task performance on high‐refresh‐rate displays.     

Fast‐response liquid‐crystal displays using crossed fringe fields

Abstract— A fast‐response and wide‐view liquid‐crystal display (LCD) using the crossed fringe‐field‐switching (CFFS) mode is proposed, where the fringe‐field electrodes exist on both the top and bottom substrates. The bottom fringe field is used to turn on the LC directors and the top fringe field is used to assist in the LC decay process. The decay time is reduced by ～2× compared to that of the conventional FFS mode between the full bright and dark states, and more than a 2× improvement is obtained for other gray‐scale transitions. This CFFS mode also preserves the wide‐view characteristics as the conventional FFS mode. Its applications to LCD TVs and monitors for reducing image blur are addressed.     

Analysis of response‐time compensation for black‐frame insertion

Abstract— An impulsive driving technique has been widely adopted for the elimination of motion blur in LCDs. Although the problem of slow temporal response time is very well known for LCDs, the inherent motion blur of moving objects in hold‐type displays has a more‐serious impact on display performance. It is well known that even very fast LCDs with zero response time still suffer from the motion‐blur artifact due to hold‐type driving effects. However, a fast temporal response is also critical in order to maximize the blur‐reduction effect even in the case of impulsive driving. In this paper, the special behavior of LC molecules in an impulsive driving environment has been analyzed especially for the case of black‐frame insertion, and we propose an effective means to implement optimized response‐time compensation (RTC) for the black‐frame insertion technique.     

A perceived sharpness metric based on the luminance slope and overshoot of the motion‐induced edge‐blur profile

To reduce perceived motion blur on liquid crystal displays, typically various techniques such as overdrive, scanning backlight, black‐data insertion, black‐field insertion, and frame rate up‐conversion are widely employed by the liquid crystal display industry. These techniques aim to steepen the edge transitions by improving the dynamic behavior of the light modulation. However, depending on the implementation, this may result in the perception of irregularly shaped motion‐induced edge‐blur profiles. It is not yet fully understood how these irregularities in the steepened edge‐blur profiles contribute to the perceived sharpness of moving objects. To better understand the consequences of several motion‐blur reduction techniques, a perception experiment is designed to evaluate the perceived sharpness of typical motion‐induced edge‐blur profiles at several contrast levels. Relevant characteristics of these profiles are determined on the basis of the perception results by means of regression analysis. As a result, a sharpness metric with two parameters is established, where one parameter relates to the edge slope and the other to the overshoot/undershoot part of the motion‐induced edge‐blur profile.     

New technologies for advanced LCD‐TV performance

Abstract— Samsung intends to be the world leader in LCD‐TV through a combination of superior product technology, advanced process execution, and aggressive capitalization. This paper explores and updates Samsung's latest developments toward its goal of ultimate LCD‐TV performance and market leadership. Samsung's development of Super PVA (S‐PVA) represents a key performance achievement. S‐PVA is a new technology which enables screen quality advantages over S‐IPS and MVA, including high transmittance, >1000:1 contrast ratio, and wide angle of view with no off‐axis image inversion. This new technology is described in detail. This paper also addresses the other remaining performance issues facing LCD‐TV, including Samsung's plans for addressing these challenges. Until recently, inter‐gray response time and associated motion blur were significant issues for achieving quality LCD‐TV images. Samsung has invented DCC‐II technology to achieve sub‐10‐msec response time, and this achievement is described. Other technology advancements, including next‐generation color performance and ultra‐low black performance, are discussed. Samsung has announced the development of a 57‐in. full‐HD (1920 × 1080) LCD‐TV panel, the world's largest, based on S‐PVA technology. This product represents the culmination of many technical breakthroughs, and is discussed herein. Samsung's LCD manufacturing strategy, which includes the world's first generation 7 LCD fab, is also described.     

Motion‐adaptive alternate gamma drive for flicker‐free motion‐blur reduction in 100/120‐Hz LCD TV

Abstract— LCD motion blur is a well‐known phenomenon, and several approaches have been developed to address it. This includes very‐high‐performance approaches based on motion‐compensated frame rate conversion (MC‐FRC) and very‐low‐cost approaches based on impulsive driving. Impulsive‐driving schemes are attractive because of their low cost, but suffer from two significant issues — loss of luminance and large‐area flicker. A new impulsive‐driving approach using motion‐adaptive alternate gamma driving (MA‐AGD), which removes motion blur and preserves the original luminance level without causing large‐area flicker, is proposed.     

A high image quality organic light‐emitting diode display with motion blur reduction for ultrahigh resolution and premium TVs

In this paper, we present a high image quality organic light‐emitting diode (OLED) display with motion blur reduction technology. Our latest work includes driving method that reduces motion blur using an adaptive black data insertion, brightness compensation technology, the simple structure pixel with low capacitance coupling for horizontal noise, and the multifunction integrated gate driver. The moving picture response time (MPRT) value of the OLED display panel with a fast response time was significantly affected by the frame frequency and the compensation driving method. The MPRT value of the large‐size OLED display panels was significantly decreased by using the integrated gate driver circuit with an MPRT reduction method. The decrease in the MPRT value originated from the turning of the emitting pixels off in advance resulting from providing black data. The integrated gate drivers were designed to achieve the normal display, the black data insertion, and the compensation mode. The MPRT value of the 65‐in. ultrahigh‐definition (UHD) OLED panels was decreased to 3.4 ms by using an integrated gate driver circuit. The motion blur of large‐size OLED display panels was significantly reduced due to a decrease in the MPRT value.     

Registration Based Non‐uniform Motion Deblurring

This paper proposes an algorithm which uses image registration to estimate a non‐uniform motion blur point spread function (PSF) caused by camera shake. Our study is based on a motion blur model which models blur effects of camera shakes using a set of planar perspective projections (i.e., homographies). This representation can fully describe motions of camera shakes in 3D which cause non‐uniform motion blurs. We transform the non‐uniform PSF estimation problem into a set of image registration problems which estimate homographies of the motion blur model one‐by‐one through the Lucas‐Kanade algorithm. We demonstrate the performance of our algorithm using both synthetic and real world examples. We also discuss the effectiveness and limitations of our algorithm for non‐uniform deblurring.     

Advanced impulsive‐driving technique for Super‐PVA panel

Abstract— Super‐PVA (S‐PVA) technology developed by Samsung has demonstrated excellent viewing‐angle performance. However, S‐PVA panels can place extra demands on charging time due to the time‐multiplexed driving scheme required to separately address two subpixels. Specifically, a 2G‐1D pixel structure theoretically requires subpixel charging in one‐half of the time available for a conventional panel. In this paper, a new LCD driving scheme, super impulsive technology (SIT), is proposed to improve motion‐blur reduction by driving an S‐PVA LCD panel at 120 Hz. The proposed scheme allows a 120‐Hz 2G‐1D panel to be driven with an adequate charging‐time margin while providing an impulsive driving effect for motion‐blur reduction. Considering that the cost of a 2G‐1D S‐PVA panel is comparable to that of a conventional 60‐Hz panel, this method achieves good performance at a reasonable price. The detailed algorithm and implementation method are explored and the performance improvements are verified.     

A psychophysical study of improvements in motion‐image quality by using high frame rates

Abstract— The ideal frame rate for the highest motion‐image quality with respect to blur and jerkiness is presented. In order to determine the requirements for avoiding these impairments, motion images from a high‐speed camera and computer graphics were combined with a high‐speed display to perform a psychophysical evaluation. The camera, operating at 1000 fps, and image processing were used to simulate various frame rates and shutter speeds, and a 480‐Hz CRT display was used to present motion images simulating various frame rates and time characteristics of the display. Subjects were asked to evaluate the difference in quality between motion images at various frame rates. A frame rate of 480 fps was chosen to be an appropriate reference frame rate that, as a first estimation, enables coverage up to the human‐dynamic‐resolution (HDR) limit based on another experiment using real moving charts. The results show that a frame rate of 120 fps provides good improvement compared to that of 60 fps, and that the maximum improvement beyond which evaluation is saturated is found at about 240 fps for representative standard‐resolution natural images.     

Characterizing displays by their temporal aperture: A theoretical framework

Abstract— The spatio‐temporal aperture and sample rate of a video display determines both the static and dynamic resolution of the video signal that is rendered. The dynamic display characteristics like the visibility of large‐area flicker, motion judder, and motion blur can be derived from the frame rate and the temporal extent of the pixel aperture (i.e., the temporal aperture). For example, liquid‐crystal displays (LCDs) have an aperture that is relatively small in the spatial dimension and wide in the temporal domain. Consequently, moving objects displayed on an LCD suffer from motion blur. Especially in TV applications, the temporal dimension has a large impact on the overall picture quality. The temporal aperture, together with the frame rate, is shown to predict the amount of perceived large‐area flicker, motion judder, and motion blur and also the performance of motion‐blur reduction algorithms for LCDs. From this analysis it is further determined how to obtain the optimal temporal aperture of a television display, for which not only properties of the human visual system (HVS), but also the properties of the video signal have to be taken into account.     

IPS‐mode dynamic LCD‐TV realization with low black luminance and high contrast by adaptive dynamic image control technology

Abstract— In this paper, an active backlight control technology and a data‐processing algorithm has been developed to improve the image quality in IPS‐mode LCD TVs. The image‐blinking problem caused by repeatedly abrupt changes in the backlight luminance was solved by using algorithms [Fba (flexible‐boundary algorithm) and Cfa (cumulative feedback algorithm)] and an optimized number of backlight dimming steps based on human perception. In the IPS‐mode 42‐in. TFT‐LCD panel, the dynamic contrast ratio can be more than twice the typical level by means of a lower black luminance and a higher white luminance. Additionally, the power consumption and LCD temperature were lowered.