Improved hydrogen storage performance of MgH2–NaAlH4 composite by addition of TiF3

In a previous paper, it was demonstrated that a MgH₂–NaAlH₄ composite system had improved dehydrogenation performance compared with as-milled pure NaAlH₄ and pure MgH₂ alone. The purpose of the present study was to investigate the hydrogen storage properties of the MgH₂–NaAlH₄ composite in the presence of TiF₃. 10 wt.% TiF₃ was added to the MgH₂–NaAlH₄ mixture, and its catalytic effects were investigated. The reaction mechanism and the hydrogen storage properties were studied by X-ray diffraction, thermogravimetric analysis, differential scanning calorimetry (DSC), temperature-programmed-desorption and isothermal sorption measurements. The DSC results show that MgH₂–NaAlH₄ composite milled with 10 wt.% TiF₃ had lower dehydrogenation temperatures, by 100, 73, 30, and 25 °C, respectively, for each step in the four-step dehydrogenation process compared to the neat MgH₂–NaAlH₄ composite. Kinetic desorption results show that the MgH₂–NaAlH₄–TiF₃ composite released about 2.4 wt.% hydrogen within 10 min at 300 °C, while the neat MgH₂–NaAlH₄ sample only released less than 1.0 wt.% hydrogen under the same conditions. From the Kissinger plot, the apparent activation energy, E_A, for the decomposition of MgH₂, NaMgH₃, and NaH in the MgH₂–NaAlH₄–TiF₃ composite was reduced to 71, 104, and 124 kJ/mol, respectively, compared with 148, 142, and 138 kJ/mol in the neat MgH₂–NaAlH₄ composite. The high catalytic activity of TiF₃ is associated with in situ formation of a microcrystalline intermetallic Ti–Al phase from TiF₃ and NaAlH₄ during ball milling or the dehydrogenation process. Once formed, the Ti–Al phase acts as a real catalyst in the MgH₂–NaAlH₄–TiF₃ composite system.     

Adiabatic burning velocity of H2–O2 mixtures diluted with CO2/N2/Ar

Global warming due to CO₂ emissions has led to the projection of hydrogen as an important fuel for future. A lot of research has been going on to design combustion appliances for hydrogen as fuel. This has necessitated fundamental research on combustion characteristics of hydrogen fuel. In this work, a combination of experiments and computational simulations was employed to study the effects of diluents (CO₂, N₂, and Ar) on the laminar burning velocity of premixed hydrogen/oxygen flames using the heat flux method. The experiments were conducted to measure laminar burning velocity for a range of equivalence ratios at atmospheric pressure and temperature (300 K) with reactant mixtures containing varying concentrations of CO₂, N₂, and Ar as diluents. Measured burning velocities were compared with computed results obtained from one-dimensional laminar premixed flame code PREMIX with detailed chemical kinetics and good agreement was obtained. The effectiveness of diluents in reduction of laminar burning velocity for a given diluent concentration is in the increasing order of argon, nitrogen, carbon dioxide. This may be due to increased capabilities either to quench the reaction zone by increased specific heat or due to reduced transport rates. The lean and stoichiometric H₂/O₂/CO₂ flames with 65% CO₂ dilution exhibited cellular flame structures. Detailed three-dimensional simulation was performed to understand lean H₂/O₂/CO₂ cellular flame structure and cell count from computed flame matched well with the experimental cellular flame.     

CO2 reforming of CH4 by combination of cold plasma jet and Ni/γ-Al2O3 catalyst

CO₂ reforming of CH₄ to synthesis gas was investigated by cold plasma jet (CPJ) only and combination of cold plasma jet with Ni/γ-Al₂O₃ catalyst at atmospheric pressure. The higher selectivity of H₂ and CO, and higher energy efficiency was obtained by this novel process. The optimum experimental conditions are: CH₄ = 3.33 Nl/min, CO₂ = 5.00 Nl/min, N₂ = 8.33 Nl/min, and the input power at 770 W. The results showed that, for the plasma only, the conversions of CH₄ and CO₂ were 46% and 34%, the selectivities of CO and H₂ were 85% and 78%, the energy efficiency was 2.9 mmol/kJ, respectively; for the combination of cold plasma jet with Ni/γ-Al₂O₃ catalyst, the conversions of CH₄ and CO₂ were increased by 14% and 6%, the yield of H₂ and CO increased by 18% and 11%, the energy efficiency reached at 3.7 mmol/kJ, respectively. And the catalyst hasn't accessorial heating. The CPJ method has the advantage of simple processing and is easy to be industrialized.     

Oxidative steam reforming of ethanol over Ni/Al2O3 catalysts promoted by CeO2, ZrO2 and CeO2–ZrO2

Oxidative steam reforming of ethanol at low oxygen to ethanol ratios was investigated over nickel catalysts on Al₂O₃ supports that were either unpromoted or promoted with CeO₂, ZrO₂ and CeO₂–ZrO₂. The promoted catalysts showed greater activity and a higher hydrogen yield than the unpromoted catalyst. The characterization of the Ni-based catalysts promoted with CeO₂ and/or ZrO₂ showed that the variations induced in the Al₂O₃ by the addition of CeO₂ and/or ZrO₂ alter the catalyst's properties by enhancing Ni dispersion and reducing Ni particle size. The promoters, especially CeO₂–ZrO₂, improved catalytic activity by increasing the H₂ yield and the CO₂/CO and the H₂/CO values while decreasing coke formation. This results from the addition of ZrO₂ into CeO₂. This promoter highlights the advantages of oxygen storage capacity and of mobile oxygen vacancies that increase the number of surface oxygen species. The addition of oxygen facilitates the reaction by regenerating the surface oxygenation of the promoters and by oxidizing surface carbon species and carbon-containing products.     

Catalytic effect of MgFe2O4 on the hydrogen storage properties of Na3AlH6–LiBH4 composite system

The effect of MgFe₂O₄ on the hydrogen storage properties of the composite Na₃AlH₆4LiBH₄ was studied for the first time, where it was found that MgFe₂O₄ addition decreased the onset desorption temperature of Na₃AlH₆4LiBH₄. Hydrogen (～9.5 wt%) was released in three stages and the dehydrogenation temperatures were reduced to 80 °C, 350 °C, and 430 °C for the first, second, and third stage, respectively. The absorption kinetics of Na₃AlH₆4LiBH₄ was also significantly improved due to the catalytic effect of MgFe₂O₄. Using Kissinger analysis, the apparent activation energies of decomposition of the Li₃AlH₆ and NaBH₄ stages in Na₃AlH₆4LiBH₄-10 wt% MgFe₂O₄ were calculated to be 72 and 141 kJ/mol, respectively. These values were considerably lower than the corresponding values for the undoped composite. X-ray diffraction analysis revealed the formation of new products such as MgO and Fe during the heating process. Our results suggest that MgFe₂O₄ enhanced the hydrogen storage properties of Na₃AlH₆4LiBH₄ through the formation of active species, such as MgO and Fe.     

Effects of MoS2 addition on the hydrogen storage properties of 2LiBH4–MgH2 systems

A 2LiBH₄–MgH₂–MoS₂ composite was prepared by solid-state ball milling, and the effects of MoS₂ as an additive on the hydrogen storage properties of 2LiBH₄–MgH₂ system together with the corresponding mechanism were investigated. As shown in the TG–DSC and MS results, with the addition of 20 wt.% of MoS₂, the onset dehydrogenation temperature is reduced to 206 °C, which is 113 °C lower than that of the pristine 2LiBH₄–MgH₂ system. Meanwhile, the total dehydrogenation amount can be increased from 9.26 wt.% to 10.47 wt.%, and no gas impurities such as B₂H₆ and H₂S are released. Furthermore, MoS₂ improves the dehydrogenation kinetics, and lowers the activation energy (E_a) 34.49 kJ mol⁻¹ of the dehydrogenation reaction between Mg and LiBH₄ to a value lower than that of the pristine 2LiBH₄–MgH₂ sample. According to the XRD test, Li₂S and MoB₂ are formed by the reaction between LiBH₄ and MoS₂, which act as catalysts and are responsible for the improved hydrogen storage properties of the 2LiBH₄–MgH₂ system.     

Enhanced hydrogen reversibility of nanoconfined LiBH4–Mg(BH4)2

This study shows the hydrogen desorption kinetics and reversible hydrogen storage properties of 0.55LiBH₄–0.45Mg(BH₄)₂ melt-infiltrated in different nanoporous carbon aerogels with different BET surface areas of 689 or 2660 m²/g and pore volumes of 1.21 or 3.13 mL/g. These investigations clearly show a significantly improved hydrogen storage capacity after four cycles of hydrogen release and uptake for bulk 0.55LiBH₄–0.45Mg(BH₄)₂ and infiltrated in carbon aerogel and the high surface area scaffold, where 22, 36 and 58% of the initial hydrogen content remain after four cycles of hydrogen release and uptake, respectively. Nanoconfinement in high surface area carbon aerogel appears to facilitate hydrogen release illustrated by release of 13.3 wt% H₂ (93%) and only 8.4 wt% H₂ (58%) from bulk hydride in the first cycle using the same physical condition. Notably, nanoconfinement also appear to have a beneficial effect on hydrogen uptake, since 8.3 wt% H₂ (58%) is released from the high surface area scaffold and only 3.1 wt% H₂ (22%) from the bulk sample during the fourth hydrogen release.     

Effect of N2/CO2 dilution on laminar burning velocity of H2–air mixtures at high temperatures

The laminar burning velocities of H₂–air mixtures diluted with N₂ or CO₂ gas at high temperatures were obtained from planar flames observed in externally heated diverging channels. Experiments were conducted for an equivalence ratio range of 0.8–1.3 and temperature range of 350–600 K with various dilution rates. In addition, computational predictions for burning velocities and their comparison with experimental results and detailed flame structures have been presented. Sensitivity analysis was carried out to identify important reactions and their contribution to the laminar burning velocity. The computational predictions are in reasonably good agreement with the present experimental data (especially for N₂ dilution case). The burning velocity maxima was observed for slightly rich mixtures and this maxima was found to shift to higher equivalence ratios (Ф) with a decrease in the dilution. The effect of CO₂ dilution was more profound than N₂ dilution in reducing the burning velocity of mixtures at higher temperatures.     

Hydrogen storage properties of destabilized MgH2–Li3AlH6 system

To improve the dehydrogenation properties of MgH₂, a novel hydrogen storage system, MgH₂–Li₃AlH₆, is prepared by mechanochemical milling. Three physical mixtures containing different mole ratios (1:4, 1:1 and 4:1) of MgH₂ and Li₃AlH₆ are studied and there exists a mutual destabilization effect between the components. The last mixture shows a capacity of 6.5 wt% H₂ with the lowest starting temperature of dehydrogenation (170 °C). First, Li₃AlH₆ decomposes into Al, LiH and H₂, and then the as-formed Al can easily destabilize MgH₂ to form the intermetallic compound Mg₁₇Al₁₂ at a temperature of 235 °C, which is about 180 °C lower than the decomposition temperature of pristine MgH₂. Finally, the residual MgH₂ undergoes a self-decomposition whose apparent activation energy has been reduced by about 22 kJ mol⁻¹ compared with pristine MgH₂. At a constant temperature of 250 °C, the mixture can dehydrogenate completely under an initial vacuum and rehydrogenate to form MgH₂ under 2 MPa H₂, showing good cycle stability after the first cycle with a capacity of 4.5 wt% H₂. The comparison between 4 MgH₂ + Li₃AlH₆ and 4 MgH₂ + LiAlH₄ mixtures is also investigated.     

The catalyst-free hydrolysis behaviors of NaBH4–NH3BH3 composites

NaBH₄–NH₃BH₃ composites were prepared by high-energy ball-milling processes for hydrogen generation through hydrolysis. After ball milling, there were no new phases found in the XRD patterns of NaBH₄–NH₃BH₃ composites. The experimental results demonstrate that when the molar ratios of NaBH₄–NH₃BH₃ composites range from 1:4 to 2:1, these composites can release above 90% hydrogen in 30 min at 70 °C. Comparing with neat NaBH₄ or NH₃BH₃, the hydrolysis properties of these composites are greatly enhanced. And the hydrolysis reaction mechanism is turned out to be more explicit as Na₂B₄O₅(OH)₄·8H₂O appears in the hydrolysis products. Since the preparation processes of these composites are simple and cost-effective and the hydrolysis of these composites achieves efficient hydrogen release, it is promising that this kind of composites can be applied in hydrogen generation.     

Improved hydrogen storage performance of the LiNH2–MgH2–LiBH4 system by addition of ZrCo hydride

Significant improvements in the hydrogen absorption/desorption properties of the 2LiNH₂–1.1MgH₂–0.1LiBH₄ composite have been achieved by adding 3wt% ZrCo hydride. The composite can absorb 5.3wt% hydrogen under 7.0 MPa hydrogen pressure in 10 min and desorb 3.75wt% hydrogen under 0.1 MPa H₂ pressure in 60 min at 150 °C, compared with 2.75wt% and 1.67wt% hydrogen under the same hydrogenation/dehydrogenation conditions without the ZrCo hydride addition, respectively. TPD measurements showed that the dehydrogenation temperature of the ZrCo hydride-doped sample was decreased about 10 °C compared to that of the pristine sample. It is concluded that both the homogeneous distribution of ZrCo particles in the matrix observed by SEM and EDS and the destabilized N–H bonds detected by IR spectrum are the main reasons for the improvement of H-cycling kinetics of the 2LiNH₂–1.1MgH₂–0.1LiBH₄ system.     

Raman spectroscopic observation of dehydrogenation in ball-milled LiNH2–LiBH4–MgH2 nanoparticles

In situ Raman spectroscopy was used to monitor the dehydrogenation of ball-milled mixtures of LiNH₂–LiBH₄–MgH₂ nanoparticles. The as-milled powders were found to contain a mixture of Li₄BN₃H₁₀ and Mg(NH₂)₂, with no evidence of residual LiNH₂ or LiBH₄. It was observed that the dehydrogenation of both of Li₄BN₃H₁₀ and Mg(NH₂)₂ begins at 353 K. The Mg(NH₂)₂ was completely consumed by 415 K, while Li₄BN₃H₁₀ persisted and continued to release hydrogen up to 453 K. At higher temperatures Li₄BN₃H₁₀ melts and reacts with MgH₂ to form Li₂Mg(NH)₂ and hydrogen gas. Cycling studies of the ball-milled mixture at 423 K and 8 MPa (80 bar) found that during rehydrogenation of Li₄BN₃H₁₀ Raman spectral modes reappear, indicating partial reversal of the Li₄BN₃H₁₀ to Li₂Mg(NH)₂ transformation.     

Reversible hydrogenation/dehydrogenation performances of the Na2LiAlH6–Mg(NH2)2 system

Complex hydrides and Metal–N–H-based materials have attracted considerable attention due to their high hydrogen content. In this paper, a novel amide–hydride combined system was prepared by ball milling a mixture of Na₂LiAlH₆–Mg(NH₂)₂ in a molar ratio of 1:1.5. The hydrogen storage performances of the Na₂LiAlH₆–1.5Mg(NH₂)₂ system were systematically investigated by a series of dehydrogenation/hydrogenation evaluation and structural analyses. It was found that a total of ∼5.08 wt% of hydrogen, equivalent to 8.65 moles of H atoms, was desorbed from the Na₂LiAlH₆–1.5Mg(NH₂)₂ combined system. In-depth investigations revealed that the variable milling treatments resulted in the different dehydrogenation reaction pathways due to the combination of Al and N caused by the energetic milling. Hydrogen uptake experiment indicated that only ∼4 moles of H atoms could be reversibly stored in the Na₂LiAlH₆–1.5Mg(NH₂)₂ system perhaps due to the formation of AlN and Mg₃N₂ after dehydrogenation.     

Combination of CO2 reforming and partial oxidation of methane to produce syngas over Ni/SiO2 and Ni–Al2O3/SiO2 catalysts with different precursors

Ni/SiO₂ and Ni–Al₂O₃/SiO₂ catalysts were prepared by incipient wetness impregnation using citrate and nitrate precursors and tested with a reaction of combination of CO₂ reforming and partial oxidation of methane to produce syngas (H₂/CO). The catalytic activity of Ni/SiO₂ and Ni–Al₂O₃/SiO₂ greatly depended on interaction between NiO and support. NiO strongly interacted with support formed small nickel particles (about 4 nm for NiSC which is abbreviation of Ni/SiO₂ prepared with Nickel citrate precursor) after reduction. The small nickel particles over NiSC catalysts exhibited a good catalytic performance.     

Rh promoted and ZrO2/Al2O3 supported Ni/Co based catalysts: High activity for CO2 reforming,steam–CO2 reforming and oxy–CO2 reforming of CH4

Ni (2.5 wt%) and Co (2.5 wt%) supported over ZrO₂/Al₂O₃ were prepared by following a hydrolytic co-precipitation method. The synthesized catalysts were further promoted by Rh incorporation (0.01–1.00 wt%) and tested for their catalytic performance for dry CO₂ reforming, combined steam–CO₂ reforming and oxy–CO₂ reforming of methane for production of syngas. The catalysts were characterized by using N₂ physical adsorption, XRD, H₂–TPR, SEM, CO₂–TPD, NH₃–TPD, TEM and TGA. The results revealed that ZrO₂ phase was in crystalline form in the catalysts along with amorphous Al oxides. Ni and Co were confirmed to be in their respective spinel phases that were reducible to metallic form at 800 °C under H₂. Ni and Co were well dispersed with their nano-crystalline nature. The catalyst with 0.2% loading of Rh showed superior performance in the studied reactions for reforming of methane. This catalyst also showed good coke resistance ability for dry CO₂ reforming reaction with 3.8 wt% of carbon formation during the reaction as compared to 11.6 wt% carbon formation over the catalyst without Rh. The catalyst performance was stable throughout the reaction time for CH₄ conversions, irrespective of carbon formation with slight decline (～1%) in CO₂ conversion. For dry CO₂ reforming reaction, this catalyst showed good conversion for both CH₄ and CO₂ (67.6% and 71.8% respectively) with a H₂/CO ratio of 0.84, while for the Oxy-CO₂ reforming reaction, the activity was superior with CH₄ and CO₂ conversions (73.7% and 83.8% respectively) and H₂/CO ratio of 1.05.     

Dehydriding properties of γ-AlH3

AlH₃ is a promising hydrogen storage material due to its high hydrogen capacity (10 wt%) and relatively low dehydriding temperature. In this work, γ-AlH₃ was prepared by organometallic synthesis method and the effects of ball milling on dehydriding properties of γ-AlH₃ were investigated systematically. Experimental results shows that as-prepared γ-AlH₃ releases about 8.3 wt% of hydrogen in the temperature range of 130–160 °C at a heating rate of 2 °C/min. Ball milling significantly improves the dehydriding behavior of γ-AlH₃. DSC-MS analysis reveals that the dehydriding temperature of γ-AlH₃ ball-milled for 10 h decreases by around 30 °C. In addition, the dehydriding activation energy of γ-AlH₃ ball-milled for 2 h decreased from 87 to 68 kJ/mol. Isothermal dehydriding measurements demonstrate that duration needed to release 90% hydrogen for as-prepared γ-AlH₃ is 280 min, but it takes only 82 min after ball milled for 10 h to release the same amount of hydrogen. Moreover, the dehydriding path of γ-AlH₃ is changed by ball milling. As-prepared γ-AlH₃ transforms to α-AlH₃ before dehydriding, while ball-milled γ-AlH₃ prefers to dehydride directly without firstly transforming to α-AlH₃.     

Effect of RuO2–CoS2 anode nanostructured on performance of H2S electrolytic splitting system

An innovative, nanostructured composite, anode electrocatalyst, material has been developed for the electrolytic splitting of (100%) H₂S feed content gas operating at 135 kPa and 150 °C. A new class of anode electrocatalyst with general composition, RuO₂–CoS₂ has shown great stability and desired properties at typical operating conditions. This configuration showed stable electrochemical operation over the period of 24 h and also exhibited a maximum current density of (0.019 A/cm²). The kinetic behaviors of various anode-based electrocatalysts demonstrated that, exchange current density, which is a direct measure of the electrochemical reaction, increased with RuO₂–CoS₂-based anodes. Moreover, high levels of feed utilization were possible using these materials. Electrochemical performance, current density, and sulfur tolerance were enhanced compared to the other tested anode configurations. The structural, microstructural and surface behavior of RuO₂–CoS₂ anode electrocatalyst was investigated in detail.     

Steam reforming of ethanol over Co3O4–Fe2O3 mixed oxides

Co₃O₄, Fe₂O₃ and a mixture of the two oxides Co–Fe (molar ratio of Co₃O₄/Fe₂O₃ = 0.67 and atomic ratio of Co/Fe = 1) were prepared by the calcination of cobalt oxalate and/or iron oxalate salts at 500 °C for 2 h in static air using water as a solvent/dispersing agent. The catalysts were studied in the steam reforming of ethanol to investigate the effect of the partial substitution of Co₃O₄ with Fe₂O₃ on the catalytic behaviour. The reforming activity over Fe₂O₃, while initially high, underwent fast deactivation. In comparison, over the Co–Fe catalyst both the H₂ yield and stability were higher than that found over the pure Co₃O₄ or Fe₂O₃ catalysts. DRIFTS-MS studies under the reaction feed highlighted that the Co–Fe catalyst had increased amounts of adsorbed OH/water; similar to Fe₂O₃. Increasing the amount of reactive species (water/OH species) adsorbed on the Co–Fe catalyst surface is proposed to facilitate the steam reforming reaction rather than decomposition reactions reducing by-product formation and providing a higher H₂ yield.     

Syngas production by CO2 reforming of coke oven gas over Ni/La2O3–ZrO2 catalysts

Syngas production by CO₂ reforming of coke oven gas (COG) was studied in a fixed-bed reactor over Ni/La₂O₃–ZrO₂ catalysts. The catalysts were prepared by sol–gel technique and tested by XRF, BET, XRD, H₂-TPR, TEM and TG–DSC. The influence of nickel loadings and calcination temperature of the catalysts on reforming reaction was measured. The characterization results revealed that all of the catalysts present excellent resistance to coking. The catalyst with appropriate nickel content and calcination temperature has better dispersion of active metal and higher conversion. It is found that the Ni/La₂O₃–ZrO₂ catalyst with 10 wt% nickel loading provides the best catalytic activity with the conversions of CH₄ and CO₂ both more than 95% at 800 °C under the atmospheric pressure. The Ni/La₂O₃–ZrO₂ catalysts show excellent catalytic performance and anti-carbon property, which will be of great prospects for catalytic CO₂ reforming of COG in the future.     

H2 and CO production over a stable Ni–MgO–Ce0.8Zr0.2O2 catalyst from CO2 reforming of CH4

Ni–Ce_0.8Zr_0.2O₂ and Ni–MgO–Ce_0.8Zr_0.2O₂ catalysts were investigated for H₂ production from CO₂ reforming of CH₄ reaction at a very high gas hourly space velocity of 480,000 h⁻¹. Ni–MgO–Ce_0.8Zr_0.2O₂ exhibited higher catalytic activity and stability (CH₄ conversion >95% at 800 °C for 200 h). The outstanding catalytic performance is mainly due to the basic nature of MgO and an intimate interaction between Ni and MgO.