Preparation and dehydrogenation properties of two cobalt-based ammine borohydrides: CoCl3·3NH3/3LiBH4 and CoCl2·3NH3/2LiBH4

Two new cobalt-based ammine borohydrides were prepared via ball milling of LiBH₄ and CoCl_n·3NH₃ (n = 3, 2) with molar ratios of 3:1 and 2:1, respectively. X-ray diffraction (XRD) results revealed the as-prepared composites having amorphous state. Thermogravimetric analysis-mass spectrometry (TG-MS) measurements showed that the two composites mainly release H₂, concurrent with the evolution of a small amount of NH₃. Further results showed that the excessive addition of LiBH₄ can suppress the liberation of NH₃, resulting in the release of H₂ with a high purity (>99 mol.%). By combination with the temperature-programmed-desorption (TPD) results, the CoCl₃·3NH₃/4LiBH₄ and CoCl₂·3NH₃/3LiBH₄composites can release 7.3 wt.% (4.2 wt.% including LiCl) and 4.2 wt.% (2.0 wt.% including LiCl) pure hydrogen, respectively, in the temperature range of 25–300 °C. Isothermal dehydrogenation results reveal that CoCl₃·3NH₃/3LiBH₄ shows favorable dehydrogenation rate at low temperatures, releasing about 5.2 wt.% (2.9 wt.% including LiCl) of hydrogen within 45 min at 80 °C.     

NH3BH3/LiBH4·NH3 modified by metal hydrides for advanced dehydrogenation

The significantly enhanced dehydrogenation performance of binary complex system, NH₃BH₃/LiBH₄·NH₃, were achieved through a chemical modification of LiH to form ternary composites of x (LiH–NH₃BH₃)/LiBH₄·NH₃. Among the studied composites, 3LiH–3NH₃BH₃/LiBH₄·NH₃ released ca. 10 wt. % high-pure hydrogen (>99.9 mol%) below 100 °C with fast kinetics, while less than 8 wt. % hydrogen, accompanied with a fair number of volatile byproducts, were released from 3NH₃BH₃/LiBH₄·NH₃ at the same conditions. Further investigations revealed that the hydrogen emission from x (LiH–NH₃BH₃)/LiBH₄·NH₃ composites is based on the combination mechanism of H^δ+ and H^δ− through the interaction between LiH–NH₃BH₃ and NH₃ group in LiBH₄·NH₃, in which the controllable protic hydrogen source from the stabilized NH₃ group played a crucial role in providing optimal stoichiometric ratio of H^δ+ and H^δ−, and thus leading to the significant improvement of dehydrogenation capacity and purity.     

LiBH4·NH3BH3: A new lithium borohydride ammonia borane compound with a novel structure and favorable hydrogen storage properties

Mechanically milling ammonia borane and lithium borohydride in equivalent molar ratio results in the formation of a new complex, LiBH₄·NH₃BH₃. Its structure was successfully determined using combined X-ray diffraction and first-principles calculations. LiBH₄·NH₃BH₃ was carefully studied in terms of its decomposition behavior and reversible dehydrogenation property, particularly in comparison with the component phases. In parallel to the property examination, X-ray diffraction and Fourier transformation infrared spectroscopy techniques were employed to monitor the phase evolution and bonding structure changes in the reaction process. Our study found that LiBH₄·NH₃BH₃ first disproportionates into (LiBH₄)₂·NH₃BH₃ and NH₃BH₃, and the resulting mixture exhibits a three-step decomposition behavior upon heating to 450 °C, totally yielding ∼15.7 wt% hydrogen. Interestingly, it was found that h-BN was formed at such a moderate temperature. And owing to the in situ formation of h-BN, LiBH₄·NH₃BH₃ exhibits significantly improved reversible dehydrogenation properties in comparison with the LiBH₄ phase.     

Nanoconfinement of LiBH4·NH3 towards enhanced hydrogen generation

Successful synthesis of LiBH₄·NH₃ confined in nanoporous silicon dioxide (LiBH₄·NH₃@SiO₂) was achieved via a new “ammonia-deliquescence” method, which avoids the involvement of any solvents during the process of synthesis. Compared to the pure LiBH₄·NH₃, the confined LiBH₄·NH₃@SiO₂ exhibited significantly improved dehydrogenation properties, which not only suppressed the emission of NH₃, but also decreased the onset dehydrogenation temperature to 60 °C, thus leading to an enhanced conversion of NH₃ to H₂. In the temperature range of 60–300 °C, the mole ratio of H₂ release for the confined LiBH₄·NH₃@SiO₂ is 85 mol % of the total gas evolved, compared to 2.66 mol % for the pristine LiBH₄·NH₃. Isothermal dehydrogenation results showed that the LiBH₄·NH₃@SiO₂ is able to release about 1.26, 2.09, and 2.35 equiv. of hydrogen, at 150 °C, 200 °C, and 250 °C, respectively. From analysis of the Fourier transform infrared, Raman, and nuclear magnetic resonance spectra of the confined LiBH₄·NH₃@SiO₂ sample heated to various temperatures, as well as its dehydrogenation product under NH₃ atmosphere, it is proposed that the improved dehydrogenation of LiBH₄·NH₃@SiO₂ is mainly attributable to two crucial factors resulting from the nanoconfinement: (1) stabilization of the NH₃ in the nanopores of SiO₂, and (2) enhanced combination of LiBH₄ and NH₃ groups, leading to fast dehydrogenation at low temperature.     

Enhanced dehydrogenation and rehydrogenation properties of LiBH4 catalyzed by graphene

The investigation of thermally induced dehydrogenation of LiBH₄ reveals that LiBH₄ doped with the graphene catalysts shows superior dehydrogenation and rehydrogenation performance to that of Vulcan XC-72, carbon nanotube and BP2000 doped LiBH₄. For doping with 20 wt.% graphene, thermal dehydrogenation of LiBH₄ is found to start at ca. 230 °C and a total weight loss of 11.4 wt.% can be obtained below 700 °C. With increased loading of graphene within a LiBH₄ sample, the onset dehydrogenation temperature and the two main desorption peaks from LiBH₄ are found to decrease while the hydrogen release amount is found to increase. Moreover, variation of the equilibrium pressure obtained from isotherms measured at 350–450 °C indicate the dehydrogenation enthalpy is reduced from 74 kJ mol⁻¹ H₂ for pure LiBH₄ to ca. 40 kJ mol⁻¹ H₂ for 20 wt.% graphene doped LiBH₄. Importantly, the reversible dehydrogenation/rehydrogenation process was achieved under 3 MPa H₂ at 400 °C for 10 h, with a capacity of ca. 4.0 wt.% in the tenth cycle. Especially, LiBH₄ is reformed and new species, Li₂B₁₀H₁₀, is detected after the rehydrogenation process.     

Li2(NH2BH3)(BH4)/LiNH2BH3: The first metal amidoborane borohydride complex with inseparable amidoborane precursor for hydrogen storage

A novel lithium amidoborane borohydride complex, Li₂(NH₂BH₃)(BH₄), was synthesized using mechanochemical method and its crystal structure was successfully determined by a combination of X-ray diffraction (XRD) analysis and first-principles calculations. Interestingly, this compound does not exist as a pure phase, but requires almost equivalent amount of amorphous LiAB as a stabilizing agent. In this paper, we report a careful study of the structure, property, and dehydrogenation mechanism of the 1:1 Li₂(NH₂BH₃)(BH₄)/LiAB composite. This composite can release ∼8 wt% H₂ at 100 °C via a two-step dehydrogenation process, with dehydrogenation kinetics better than the parenting phases. The composite and its dehydrogenation products were characterized by the combined XRD, Fourier transformation infrared (FTIR) spectroscopy, and solid-state ¹¹B MAS NMR techniques. Selective deuterium labeling was performed to elucidate a reaction sequence for the hydrogen release by analyzing the released gases.     

Structural and reaction pathway analyses of Mg(BH4)2·2NH3 for hydrogen storage : A first-principles study

Mg(BH₄)₂·2NH₃ is a relatively new compound considered for hydrogen storage. The fundamental properties of the compound were comprehensively studied using first-principles calculations, such as crystal structure and electronic structure, reaction Gibbs free energy and possible reaction pathway. The calculated crystal structure is in good agreement with the experimental and other theoretical results. Results from electronic density of states (DOS) and electron localization function (ELF) show the covalent characteristics of the N–H and the B–H bonds, and the weak ionic interactions between the Mg atom and the NH₃ ligands or the (BH₄)⁻ ligands. The reaction Gibbs free energies of several possible decomposition reactions were calculated between 0 and 700 K. All the reactions are exothermic. The most likely reaction pathway of the dehydrogenation reaction was clarified to show five distinct steps.     

Hydrogen generation from noncatalytic hydrolysis of LiBH4/NH3BH3 mixture for fuel cell applications

Ammonia borane (NH₃BH₃) and lithium borohydride (LiBH₄) are promising hydrides as they contain 19.6 wt.% and 18.5 wt.% hydrogen respectively. However, hydrolysis of NH₃BH₃ needs catalysts or high temperature to initiate the release of hydrogen. On the other hand, hydrolysis of LiBH₄ is incomplete, because the agglomeration of LiBH₄ and its products limits its full utilization. In the present work, hydrolysis performance of LiBH₄/NH₃BH₃ mixture was investigated. The results show that LiBH₄/NH₃BH₃ mixture can fully release its theoretical amount of hydrogen at room temperature without catalysts. In the presence of LiBH₄, NH₃BH₃ can be fully hydrolyzed at room temperature. In return, in the presence of NH₃BH₃, the agglomeration can be avoided resulting in a complete hydrolysis process. Our results indicate that the improvements are attributed to the intermolecular electron migration between LiBH₄ and NH₃BH₃, which changes the reactivity of these compounds. Hydrolytic heat of LiBH₄ also contributes to the promoted hydrolysis of NH₃BH₃. Our results present a novel strategy for noncatalytic hydrolysis of NH₃BH₃ and LiBH₄ for proton exchange membrane fuel cell applications.     

Fundamental environmental reactivity testing and analysis of the hydrogen storage material 2LiBH4·MgH2

While the storage of hydrogen for portable and stationary applications is regarded as critical in bringing PEM fuel cells to commercial acceptance, little is known of the environmental exposure risks posed in utilizing condensed phase chemical storage options as in complex hydrides. It is thus important to understand the effect of environmental exposure of metal hydrides in the case of accident scenarios. Simulated tests were performed following the United Nations standards to test for flammability and water reactivity in air for a destabilized lithium borohydride and magnesium hydride system in a 2 to 1 molar ratio respectively. It was determined that the mixture acted similarly to the parent, lithium borohydride, but at slower rate of reaction seen in magnesium hydride. To quantify environmental exposure kinetics, isothermal calorimetry was utilized to measure the enthalpy of reaction as a function of exposure time to dry and humid air, and liquid water. The reaction with liquid water was found to increase the heat flow significantly during exposure compared to exposure in dry or humid air environments. Calorimetric results showed the maximum normalized heat flow of the fully charged material was 6 mW/mg under liquid phase hydrolysis; and 14 mW/mg for the fully discharged material also occurring under liquid phase hydrolysis conditions.     

Dust cloud combustion characterization of a mixture of LiBH4 destabilized with MgH2 for reversible H2 storage in mobile applications

This study discusses results of an experimental program to determine dust cloud combustion characteristics of 2LiBH₄ + MgH₂ binary system in air. The determined parameters of hydrided and partially-dehydrided states of this system include: maximum deflagration pressure rise (P_MAX), maximum rate of pressure rise (dP/dt)_MAX, minimum ignition temperature (T_C), minimum explosible concentration (MEC), minimum ignition energy (MIE), and explosion severity index (K_St). Impact of dust particle size on the measured parameters is evaluated for the partially-dehydrided state. For dust of same mean particle size, results show the hydrided state to be more explosible in air compared to its partially-dehydrided state. Moreover, MIE of the partially-dehydrided mixture is identified in the test with lowest ignition delay time (IDT) and highest dust cloud concentration (DC). Taguchi's mixed-levels design of experiments (DoE) methodology is employed to calculate dust's MIE response surface as a function of DC and IDT. The one-at-a-time effect and interaction effect between DC and IDT on dust MIE are determined. The core insights of this contribution are useful for quantifying risks in mobile and stationary H₂ storage applications, informing H₂ safety standards, and augmenting property databases of H₂ storage materials.     

Hydrogen desorption from LiBH4 destabilized by chlorides of transition metal Fe,Co, and Ni

The dehydrogenation temperature of LiBH₄ was considerably decreased to 230 °C–300 °C when it was manually mixed with FeCl₂, CoCl₂ and NiCl₂ in a molar ratio of 2:1. Mixing LiBH₄ with NiCl₂ or FeCl₂ led to complete hydrogen desorption from LiBH₄, i.e. 18.3 wt% hydrogen was achieved with respect to the weight of LiBH₄. However, the CoCl₂ addition resulted in less hydrogen release due to the formation of diborane. Ball milling treatment for the mixtures of LiBH₄ and these chlorides further decreased hydrogen desorption temperatures. The results indicate that LiBH₄ could be effectively destabilized by the chlorides of Fe, Co and Ni. Small doping of these chlorides into LiBH₄ was found to be effective in enhancing dehydrogenation kinetics of the remaining LiBH₄ due to the formation of metal borides.     

TiF4-doped Mg(AlH4)2 with significantly improved dehydrogenation properties

A significant decrease in the dehydrogenation temperature of Mg(AlH₄)₂ was achieved by low-energy ball milling with TiF₄. Approximately 8.0 wt% of hydrogen was released from the Mg(AlH₄)₂-0.025TiF₄ sample with an on-set temperature of 40 °C, which represents a decrease of 75 °C relative to pristine Mg(AlH₄)₂. In contrast to the three-step reaction for pristine Mg(AlH₄)₂, hydrogen desorption from the TiF₄-doped sample involves a two-step process because the Ti-based species participates in the dehydrogenation reaction. The presence of TiF₄ alters the nucleation and growth of the dehydrogenation product, significantly decreasing the activation energy barrier of the first step in the dehydrogenation of Mg(AlH₄)₂. Further hydrogenation measurements revealed that the presence of the Ti-based species was also advantageous for hydrogen uptake, as the on-set hydrogenation temperature was only 100 °C for the dehydrogenated TiF₄-doped sample, compared with 130 °C for the additive-free sample.     

Promoted hydrogen release from 3LiBH4/MnF2 composite by doping LiNH2: Elimination of diborane release and reduction of decomposition temperature

The evolution of diborane accompanying H₂ release during the decomposition of transition metal borohydrides reduces the purity of evolved hydrogen and results in capacity loss during cycling. To solve the problem, a small amount of LiNH₂ is doped into a 3LiBH₄/MnF₂ composite and the decomposition properties are investigated. The results show that after doping LiNH₂, the formation of diborane during decomposition is effectively suppressed meanwhile the decomposition temperature is significantly reduced. Around 5 wt.% pure hydrogen can be released at 95–140 °C from 5 wt.% LiNH₂-doped 3LiBH₄/MnF₂ composite. These improvements in the decomposition performance are mainly attributed to the prevention of the formation of B–H–B bonds for B₂H₆ and the destabilization of B–H bonds in borohydrides by the interaction of BH₄⁻ and NH₂⁻.     

Comparative study on the dehydrogenation properties of TiCl4-doped LiAlH4 using different doping techniques

Lithium aluminum hydride (LiAlH₄) is an attractive hydrogen storage material because of its comparatively high gravimetric hydrogen storage capacity. In this study, titanium tetrachloride (TiCl₄), which is liquid at room temperature, was chosen as dopant because of its high catalytic efficiency regarding the dehydrogenation of LiAlH₄. Three low-energy doping methods (additive dispersion via ball milling at low rotation speed, magnetic stirring and magnetic stirring in ethyl ether) with different TiCl₄ concentrations were compared in order to obtain optimum dehydrogenation properties of LiAlH₄. At 80 °C, TiCl₄-doped LiAlH₄ can release up to 6.5 wt.%-H₂, which opens the way to use of exhaust heat of PEM fuel cells to trigger the hydrogen release from LiAlH₄.     

Confinement effects on structural,electronic properties and dehydrogenation thermodynamics of LiBH4

Confinement effect on the structural, electronic and thermodynamic properties of LiBH₄ is investigated by density functional theory. The thermodynamically and dynamically stable confinement structure is testified to be γ-LiBH₄@C₃₁Ti according to the adsorption energy and vibrational frequency calculations. The tridentate structure formed by [BH₄]⁻ and Li⁺ in the unconfined LiBH₄ changes into bidentate structure in γ-LiBH₄@C₃₁Ti. We observe that both the occupied and unoccupied states of H 1s, B 2s, B 2p, Li 2s, and Li 2p orbitals in the partial DOSs of γ-LiBH₄@C₃₁Ti shift to high energy level and the splits of DOS peaks occur at the states of H 1s, B 2p, and Li 2p orbitals. Different from the first-step decomposition reaction of LiBH₄, the one for γ-LiBH₄@C₃₁Ti changes into 2LiBH₄@C₃₁Ti → 2LiH + 2B@C₃₁Ti + 3H₂. Moreover, the reaction enthalpy for the first-step decomposition reaction of γ-LiBH₄@C₃₁Ti decreases to 5.864 eV, which is smaller than that (17.204 eV) of LiBH₄. According to the hydrogen removal energy calculations, we observe that the confinement effects make the removal of the first and second hydrogen atoms in γ-LiBH₄@C₃₁Ti easy.     

Influence of titanium and nickel dopants on the dehydrogenation properties of Mg(AlH4)2: Electronic structure mechanisms

The structures and dehydrogenation properties of pure and Ti/Ni-doped Mg(AlH₄)₂ were investigated using the first-principles calculations. The dopants mainly affect the geometric and electronic structures of their vicinal AlH₄ units. Ti and Ni dopants improve the dehydrogenation of Mg(AlH₄)₂ in different mechanisms. In the Ti-doped case, Ti prefers to occupy the 13-hedral interstice (Ti_iA) and substitute for the Al atom (Ti_Al), to form a high-coordination structure TiH_n (n = 6, 7). The Ti 3d electrons hybridize markedly with the H 1s electrons in Ti_Al and with the Al 3p electrons in Ti_iA, which weakens the Al–H bond of adjacent AlH₄ units and facilitates the hydrogen dissociation. A TiAl₃H₁₃ intermediate in Ti_iA is inferred as the precursor of Mg(AlH₄)₂ dehydrogenation. In contrast, Ni tends to occupy the octahedral interstice to form the NiH₄ tetrahedron. The tight bind of the Ni with its surrounding H atoms inhibits their dissociation though the nearby Al–H bond also becomes weak. Therefore, Ti is the better dopant candidate than Ni for improving the dehydrogenation properties of Mg(AlH₄)₂ because of its abundant activated hydrogen atoms and low hydrogen removal energy.     

On the decomposition of the 0.6LiBH4-0.4Mg(BH4)2 eutectic mixture for hydrogen storage

The dehydrogenation reaction of the 0.6LiBH₄-0.4Mg(BH₄)₂ eutectic system was investigated by Temperature-Programmed-Desorption and Pressure-Composition-Isotherm methods, in the range of 25–540 °C and 0.1–150 bar of p(H₂). A sequence of four decomposition steps was found by TPD measurements; they occur at 235, 315, 365 and 460 °C for p(H₂) = 3 bar, with a clear T decrease with respect to pure LiBH₄ and Mg(BH₄)₂. In the PCI experiments, the first two steps could not be resolved but appeared merged in a single process. The amounts of H₂ release at each step and the Δ_rH and Δ_rS values derived from van’t Hoff plots were analyzed and compared with known results for relevant possible reactions. A scheme of interpretation was then proposed for all four processes. In particular, a fraction of LiBH₄ and Mg(BH₄)₂ would react together in the range of 300–350 °C according to 2LiBH₄ + Mg(BH₄)₂ → 2B + 2LiH + MgB₂ + 7H₂, thus explaining the quite large H₂ yield therein observed. The first and fourth steps correspond to decompositions of pure remaining Mg(BH₄)₂ and LiBH₄, respectively, and the third one to dehydrogenation of MgH₂ produced in the first step.     

Enhanced hydrogen storage properties of LiBH4-MgH2 composite by the catalytic effect of MoCl3

Though LiBH₄-MgH₂ system exhibits an excellent hydrogen storage property, it still presents high decomposition temperature over 350 °C and sluggish hydrogen absorption/desorption kinetics. In order to improve the hydrogen storage properties, the influence of MoCl₃ as an additive on the hydrogenation and dehydrogenation properties of LiBH₄-MgH₂ system is investigated. The reversible hydrogen storage performance is significantly improved, which leads to a capacity of about 7 wt.% hydrogen at 300 °C. XRD analysis reveals that the metallic Mo is formed by the reaction between LiBH₄ and MoCl₃, which is highly dispersed in the sample and results in improved dehydrogenation and hydrogenation performance of LiBH₄-MgH₂ system. From Kissinger plot, the activation energy for hydrogen desorption of LiBH₄-MgH₂ system with additive MoCl₃ is estimated to be ∼43 kJ mol⁻¹ H₂, 10 kJ mol⁻¹ lower than that for the pure LiBH₄-MgH₂ system indicating that the kinetics of LiBH₄-MgH₂ composite is significantly improved by the introduction of Mo.     

Effect of Al on the hydrogen storage properties of Mg(BH4)2

The various Mg–B–Al–H systems composed of Mg(BH₄)₂ and different Al-sources (metallic Al, LiAlH₄ and its decomposition products) have been investigated as potential hydrogen storage materials. The role of Al was studied on the dehydrogenation and the rehydrogenation of the systems. The results indicate that the different Al-sources exhibit a similar improving effect on the dehydrogenation properties of Mg(BH₄)₂. Taking the Mg(BH₄)₂ + LiAlH₄ system as an example, at first LiAlH₄ rapidly decomposes into LiH and Al, then Mg(BH₄)₂ decomposes into MgH₂ and B, finally the MgH₂ reacts with Al, LiH and B, which forms Mg₃Al₂ and MgAlB₄. The system starts to desorb H₂ at 140 °C and desorbs 3.6 wt.% H₂ below 300 °C, while individual Mg(BH₄)₂ starts to desorb H₂ at 250 °C and desorbs only 1.3 wt.% H₂ below 300 °C. The isothermal desorption kinetics of the Mg–B–Al–H systems is about 40% faster than that of Mg(BH₄)₂ at the hydrogen desorption ratio of 90%. In addition, the Mg–B–Al–H systems show partial reversibility at moderate temperature and pressure. For Al-added system, the product of rehydrogenation is MgH₂, while for LiAlH₄-added system the product is composed of LiBH₄ and MgH₂.