Grafting of telechelic poly(lactic‐co‐glycolic acid) onto O2 plasma‐treated polypropylene flakes

An operating window, which is bounded by two temperatures and draw ratios, defines the stable and defect‐free stretching region of a polymer film. Physical properties including the coefficient of thermal expansion (CTE), birefringence, and Young's modulus of a recyclable polyimide (PIR) film were measured under stretching conditions. While values of birefringence and Young's modulus increased with increasing stretching stress in the machine direction, the CTE was found to decrease. A semiempirical model for the prediction of birefringence and Young's modulus under stretching conditions was developed, from which the CTE could be estimated from the Young's modulus data. Theoretically evaluated physical properties were found to be in qualitative agreement with the experimental data. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Water‐assisted formation of honeycomb films of poly(L‐lactic‐co‐glycolic acid)

The ordered honeycomb structures of poly(L ‐lactic‐co‐glycolic acid) and poly(D ,L ‐lactic‐co‐glycolic acid) fabricated in a humid atmosphere were reported in this paper. It was found that surfactants were important in the formation of honeycomb films of hydrophobic polymer. The affecting factors, such as the environment temperature, the atmosphere humidity, and the concentration of the polymer solution of the honeycomb porous structure, were also tested. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1013–1018, 2006     

Hemocompatibility of electrospun halloysite nanotube‐ and carbon nanotube‐doped composite poly(lactic‐co‐glycolic acid) nanofibers

One of the major problems of nanofiber scaffold or other devices like cardiovascular or blood‐contacting medical devices is their weak mechanical properties and the lack of hemocompatibility of their surfaces. In this study, halloysite nanotubes (HNTs) and carbon nanotubes (CNTs) were incorporated within poly(lactic‐co‐glycolic acid) (PLGA) nanofibers and the mechanical property and hemocompatibility of both types of composite nanofibers with different doping levels were thoroughly investigated. The morphology and internal distribution of the doped nanotubes within the nanofibers were characterized using scanning electron microscopy and transmission electron microscopy. Mechanical properties of the electrospun nanofibers were tested using a material testing machine. The hemocompatibility of the composite nanofibers was examined through hemolytic and anticoagulant assay, respectively. We show that the doped HNTs or CNTs are distributed in the nanofibers with a coaxial manner and the incorporation of HNTs or CNTs does not significantly change the morphology of the PLGA nanofibers. Importantly, the incorporation of HNTs or CNTs within PLGA nanofibers significantly improves the mechanical property of PLGA nanofibers, and PLGA nanofibers with or without doping of the HNTs and CNTs display good anticoagulant property and negligible hemolytic effect to human red blood cells. With the enhanced mechanical property, great hemocompatibility, and previously demonstrated biocompatibility of both HNTs‐ and CNTs‐doped composite PLGA nanofibers, these composite nanofibers may be used as therapeutic artificial tissue/organ substitutes for tissue engineering applications. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Formation of ordered microporous films with water as templates from poly(D,L‐lactic‐co‐glycolic acid) solution

Recently a method that uses water droplets at the air–solution interface as an ordered template was reported for the preparation of ordered micrometer‐size honeycomb structures. Here we show that the method can also be used for formation of honeycomb‐like porous films from random copolymers with certain hydrophilicity, besides those polymers with defined structures such as block copolymers, starlike homopolymers, amd amphiphilic polymers. This demonstrates that the stabilization of water droplets is the key factor for the regular structure. Also we indicate that size and structure of the films can be regulated by such variables as concentration and atmospheric humidity. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1846–1850, 2003     

Ethylenediamino bridged bis(β‐cyclodextrin)/ poly(DL‐lactic‐co‐glycolic acid) nanoparticles prepared by modified double emulsion method: Effect of polyvinyl alcohol on nanoparticle properties

This study continues long‐standing efforts to develop protein delivery systems based on cyclodextrin‐conjugated polyester in our laboratory. The crude products of ethylenediamino bridged bis(β‐cyclodextrin)‐conjugated poly(DL ‐lactic‐co‐glycolic acid) were used in this study to make full use of unreacted reactant. With bovine serum albumin (BSA) as a model protein, the encapsulation effects (the encapsulation efficiency and particle size) of nanoparticles were similar to those of using pure conjugated products. Besides, a water‐in‐oil‐in‐water emulsification technique was conveniently modified. By adding polyvinyl alcohol (PVA) in the internal aqueous phase, a more stabilized emulsion was formed. Consequently, less PVA (～ 0.05%) was needed in the outer aqueous phase and less PVA (0.14 g/g nanoparticles) remained in the nanoparticles. This modification resulted in improved encapsulation efficiency (～ 89–94%) of BSA and an enlarged particle size (340–390 nm). Furthermore, the burst release of BSA at the 1st day was less pronounced (7–12% of the encapsulated amount) than that of nanoparticles with no PVA added in the internal aqueous phase. Degradation studies using transmission electron microscope and gel permeation chromatography suggested that the mechanism for protein release was mainly through nanoparticles erosion. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Characterization of a novel bioactive poly[(lactic acid)‐co‐(glycolic acid)] and collagen hybrid matrix for dermal regeneration

Different strategies have been explored for the purpose of autologous or allogeneic dermal regeneration. We have developed a hybrid matrix by lyophilizing collagen within a poly[(lactic acid)‐co‐(glycolic acid)] (10:90, molar composition) knitted mesh, in order to assimilate the advantages of natural and synthetic materials. The porosity of the mesh was found to be almost 95 %, using Micro‐Computed Tomography Analysis, while the mechanical properties were comparable to native skin. In vitro biocompatibility was analyzed by culturing rat dermal fibroblasts in the matrices over 10 days. The cells were able to attach, proliferate and remain viable within the hybrid matrices. Subsequently, in vivo biocompatibility was analyzed by implanting the matrices subcutaneously in immunocompetent rats, for 2 weeks. Histological analysis showed that the poly[(lactic acid)‐co‐(glycolic acid)]–collagen hybrid matrices evoked minimal host tissue response in vivo. This study forms the basis of using poly[(lactic acid)‐co‐(glycolic acid)]–collagen hybrid matrices for our future work to develop a bioactive matrix for dermal regeneration. Copyright © 2005 Society of Chemical Industry     

Preparation of magnetic poly(lactic‐co‐glycolic acid) microspheres with a controllable particle size based on a composite emulsion and their release properties for curcumin loading

Because of their unique magnetic features and good biocompatibility, magnetic poly(lactic‐co‐glycolic) acid (PLGA) microspheres have great application potential in magnetic targeted drug‐delivery systems. In this research, magnetic PLGA microspheres with controllable particle sizes were successfully prepared from a composite emulsion with a T‐shaped microchannel reactor. A water‐in‐oil‐in‐water composite emulsion was generated by the injection of a dichloromethane/gelatin water‐in‐oil initial emulsion into the microchannel together with a coating aqueous phase, that is, the aqueous solution of glucose and poly(vinyl alcohol). The mean particle size of the microspheres could be controlled by the manipulation of the osmotic pressure difference between the internal and external aqueous phases via changes in the glucose concentration. Curcumin, a drug with an inhibitory effect on tumor cells, was used to exemplify the release properties of the magnetic PLGA microspheres. We found that the mean particle size of the microspheres ranged from 16 to 207 μm with glucose concentrations from 0 to 20 wt %. The resulting microspheres showed a rapid magnetic response, good superparamagnetism, and a considerable magnetocaloric effect, with a maximum magnetic entropy of 0.061 J·kg^?1·K^?1 at 325 K. An encapsulation efficiency of up to 77.9% was achieved at a loading ratio of 3.2% curcumin. A release ratio of 72.4% curcumin from the magnetic PLGA microspheres was achieved within 120 h in a phosphate‐buffered solution. The magnetic PLGA microspheres showed potential to be used as drug carriers for magnetic targeted tumor therapy. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43317.     

Intrinsic factor and vitamin B12 complex‐loaded poly[lactic‐co‐(glycolic acid)] microspheres: preparation,characterization and drug release

BACKGROUND: Vitamin B12 is an essential vitamin required by all mammals. Absorption of vitamin B12 is facilitated by binding of intrinsic factor–vitamin B₁₂ complex to specific receptors in the ileum. In humans a deficiency of this vitamin or a lack of intrinsic factor leads to pernicious anaemia. The major objective of the present study was to prepare intrinsic factor–vitamin B12 complex‐loaded poly[lactic‐co‐(glycolic acid)] (PLGA)‐based microparticles and to investigate their release kinetics. RESULTS: PLGA copolymer was synthesized by the ring‐opening polymerization method and characterized using gel permeation chromatography, Fourier transform infrared spectroscopy and ¹H NMR. The glass transition temperature measurement showed a single T_g at 40 °C. The intrinsic factor–vitamin B12 complex‐loaded PLGA microspheres were prepared by a water‐in‐oil‐in‐water double emulsion solvent extraction/evaporation technique. An environmental scanning electron microscopy investigation demonstrated that the PLGA particles had a mean particle diameter of 38 µm. Interestingly, different drug release patterns (bi‐ and triphasic ones) were observed for vitamin B12‐loaded and intrinsic factor–vitamin B12 complex‐loaded microspheres. In contrast to the rapid release of vitamin B12 by itself, in vitro release tests showed that intrinsic factor and vitamin B12 in the complex were released from PLGA microspheres in a sustained manner over 15 days. CONCLUSION: PLGA microspheres can be an effective carrier for the intrinsic factor–vitamin B12 complex. Copyright © 2007 Society of Chemical Industry     

Effect of Processing Variables on the Morphology of Electrospun Poly[(lactic acid)‐co‐(glycolic acid)] Nanofibers

A systematic study of the effects of , flow rate, voltage, and composition on the morphology of electrospun PLGA nanofibers is reported. It is shown that changes of voltage and flow rate do not appreciably affect the morphology. However, the of PLGA predominantly determines the formation of bead structures. Uniform electrospun PLGA nanofibers with controllable diameters can be formed through optimization. Further, multi‐walled carbon nanotubes can be incorporated into the PLGA nanofibers, significantly enhancing their tensile strength and elasticity without compromising the uniform morphology. The variable size, porosity, and composition of the nanofibers are essential for their applications in regenerative medicine.

     

Preparation and evaluation of novel blend microspheres of poly(lactic‐co‐glycolic)acid and pluronic F68/127 for controlled release of repaglinide

The objective of the present work was to study the release behavior of plain and blend microspheres (MS) of PLGA and Pluronic F68/127. In this study, a novel blend MS of poly(D ,L ‐lactic‐co‐glycolic acid) (PLGA) and Pluronic F68/127 (PLF68/127) were prepared by the emulsion–solvent evaporation method. Repaglinide, an antidiabetic drug with a very short half‐life, was successfully encapsulated into the blend MS. Various formulations were prepared by varying the ratio of PLGA and PLF68/127. Drug encapsulation up to 91% was achieved as measured by UV spectroscopy. Scanning electron microscopy showed that MS have smooth surfaces even after incorporation of PLF68/127. Particle size, as measured by using laser light scattering technique, gave an average size ranging from 12 to 47 μm. Differential scanning calorimetry (DSC) was performed to understand the crystalline nature of the drug after encapsulation into MS. DSC revealed the crystalline dispersion in the polymer matrix. In vitro release experiments performed in simulated intestinal fluid, indicated the dependence of release rate on the amount of PLF68/127 present in the MS; slow release was extended up to 153 h. Release data have been fitted to an empirical equation to compute the diffusional exponent (n), which indicated that the release mechanism to be non‐Fickian type. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Reactive blending of poly(L‐lactic acid) with poly(ethylene‐co‐vinyl alcohol)

Poly(L ‐lactic acid) (PLLA) was blended with poly(ethylene‐co‐vinyl alcohol) (EVOH) in the presence of an esterification catalyst to induce reaction between the hydroxyl groups of EVOH and the terminal carboxylic group of PLLA. Nascent low‐molecular‐weight PLLA, obtained from a direct condensation polymerization of L ‐lactic acid in bulk state, was used for the blending. Domain size of the PLLA phase in the graft copolymer was much smaller than that corresponding to a PLLA/EVOH simple blend. The mechanical properties of the graft copolymer were far superior to those of the simple blend, and the graft copolymer exhibited excellent mechanical properties even though the biodegradable fraction substantially exceeded the percolation level. The grafted PLLA reduced the crystallization rate of the EVOH moiety. Melting peak temperature (T_m) of the PLLA phase was not observed until the content of PLLA in the graft reaction medium went over 60 wt %. The modified Sturm test results demonstrated that biodegradation of EVOH‐g‐PLLA took place more slowly than that of an EVOH/PLLA simple blend, indicating that the chemically bound PLLA moiety was less susceptible to microbial attack than PLLA in the simple blend. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 886–890, 2005     

Multiblock copolymers based on segments of poly (D,L‐lactic‐glycolic acid) and poly(ethylene glycol) or poly(ϵ‐caprolactone): A comparison of their thermal properties and degradation behavior

A comparison of the thermal properties of two classes of poly(D,L ‐lactic‐glycolic acid) multiblock copolymers is reported. In particular, the results of differential scanning calorimetry, and thermogravimetric analysis of copolymers containing poly(ethylene glycol) (PEG) or diol‐terminated poly(ϵ‐caprolactone) (PCDT) segments are described. The influence of the chemical structure and the length of PEG and PCDT on thermal stability, degree of crystallinity and glass transition temperature (T_g ) is discussed. Finally, an evaluation of the hydrolytic behavior in conditions mimicking the physiological environment is reported. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1721–1728, 2000     

Compatible and crystallization properties of poly(lactic acid)/poly(butylene adipate‐co‐terephthalate) blends

Differential scanning calorimetry (DSC), wide angle X‐ray diffraction (WAXD) and dynamic mechanical analysis (DMA) properties of poly(lactic acid)/ poly(butylene adipate‐co‐terephthalate) (PLA/PBAT) specimens suggest that only small amounts of poor PLA and/or PBAT crystals are present in their corresponding melt crystallized specimens. In fact, the percentage crystallinity, peak melting temperature and onset re‐crystallization temperature values of PLA/PBAT specimens reduce gradually as their PBAT contents increase. However, the glass transition temperatures of PLA molecules found by DSC and DMA analysis reduce to the minimum value as the PBAT contents of PLA_xPBAT_y specimens reach 2.5 wt %. Further morphological and DMA analysis of PLA/PBAT specimens reveal that PBAT molecules are miscible with PLA molecules at PBAT contents equal to or less than 2.5 wt %, since no distinguished phase‐separated PBAT droplets and tan δ transitions were found on fracture surfaces and tan δ curves of PLA/PBAT specimens, respectively. In contrast to PLA, the PBAT specimen exhibits highly deformable properties. After blending proper amounts of PBAT in PLA, the inherent brittle deformation behavior of PLA was successfully improved. Possible reasons accounting for these interesting crystallization, compatible and tensile properties of PLA/PBAT specimens are proposed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Facile fabrication of highly flexible poly(lactic acid) film using alternate multilayers of poly[(butylene adipate)‐co‐terephthalate]

Poly(lactic acid) (PLA) and poly[(butylene adipate)‐co‐terephthalate] (PBAT) are both commonly used biodegradable polymers. In this study, co‐extrusion of PLA and PBAT was used to create alternately multilayered films in order to obtain high‐flexibility PLA film. The incorporation of PBAT provides enhanced flexibility to PLA and the effect is more distinct in the PLA/PBAT multilayer film as the number of layers increases. Through differential scanning calorimetric and wide‐angle X‐ray scattering analyses, the crystallinity of PLA is shown to decrease more in the multilayer film than in the blended film. Transparency is also enhanced in the multilayer film. The fabrication of alternate multilayered film by co‐extrusion of PLA and PBAT shows a new method of preparing a flexible, transparent and fully biodegradable film, which is impossible through a blending process. © 2014 Society of Chemical Industry     

Miscibility of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) with high molecular weight poly(lactic acid) blends determined by thermal analysis

An important strategy used in the polymer industry in recent years is blending two bio‐based polymers to attain desirable properties similar to traditional thermoplastics, thus increasing the application potential for bio‐based and bio‐degradable polymers. Miscibility of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) with poly(L ‐lactic acid) (PLA) were characterized using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). Three different grades of commercially available PLAs and one type of PHBV were blended in different ratios of 50/50, 60/40, 70/30, and 80/20 (PHBV/PLA) using a micro‐compounder at 175°C. The DSC and TGA analysis showed the blends were immiscible due to different stereo configuration of PLA polymer and two distinct melting temperatures. However, some compatibility between PHBV and PLA polymers was observed due to decreases in PLA's glass transition temperatures. Additionally, the blends do not show clear separation by SEM analysis, as observed in the thermal analysis. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Influence of phthalic anhydride and bioxazoline on the mechanical and morphological properties of biodegradable poly(lactic acid)/poly[(butylene adipate)‐co‐terephthalate] blends

Poly(lactic acid) (PLA)/poly[(butylene adipate)‐co‐terephthalate] (PBAT) blends were fabricated by melt blending, with 2,2′‐(1,3‐phenylene)bis(2‐oxazoline) (BOZ) and phthalic anhydride (PA) used as compatibilizers. It was found that a small amount of BOZ or PA greatly increased the elongation at break of the PLA/PBAT blends without sacrificing their high tensile strength. Scanning electron microscopy results revealed that the PBAT particles became finer and were uniformly dispersed in the matrix when the compatibilizers were incorporated, which indicated that the interfacial bonding and compatibilization between PLA and PBAT were improved in the presence of the compatibilizers. Compared with PLA/PBAT blends, the molecular weight of PLA/PBAT/PA/BOZ blends was increased due to chain‐extending reactions. Differential scanning calorimetry results suggested PBAT decreased the crystallization rate and crystallinity of PLA in the blends. Moreover, the glass transition temperature of PBAT was further decreased when the compatibilizers were used. © 2013 Society of Chemical Industry     

Thermal properties of blends of poly(hydroxybutyrate‐co‐hydroxyvalerate) and poly(styrene‐co‐acrylonitrile)

Thermal properties of blends of poly(hydroxybutyrate‐co‐hydroxyvalerate) (PHBV) and poly(styrene‐co‐acrylonitrile) (SAN) prepared by solution casting were investigated by differential scanning calorimetry. In the study of PHBV‐SAN blends by differential scanning calorimetry, glass transition temperature and melting point of PHBV in the PHBV‐SAN blends were almost unchanged compared with those of the pure PHBV. This result indicates that the blends of PHBV and SAN are immiscible. However, crystallization temperature of the PHBV in the blends decreased approximately 9–15°. From the results of the Avrami analysis of PHBV in the PHBV‐SAN blends, crystallization rate constant of PHBV in the PHBV‐SAN blends decreased compared with that of the pure PHBV. From the above results, it is suggested that the nucleation of PHBV in the blends is suppressed by the addition of SAN. From the measured crystallization half time and degree of supercooling, interfacial free energy for the formation of heterogeneous nuclei of PHBV in the PHBV‐SAN blends was calculated and found to be 2360 (mN/m)³ for the pure PHBV and 2920–3120 (mN/m)³ for the blends. The values of interfacial free energy indicate that heterogeneity of PHBV in the PHBV‐SAN blends is deactivated by the SAN. This result is consistent with the results of crystallization temperature and crystallization rate constant of PHBV in the PHBV‐SAN blends. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 673–679, 2000     

Swelling–deswelling behavior of poly(acrylamide‐co‐maleic acid) hydrogels

In this study the poly(acrylamide‐co‐maleic acid) hydrogels containing small amounts of maleic acid have been synthesized, and the effect of pH, ionic strength, and nature of counterions on the equilibrium water uptake has been investigated. The incorporation of small amount of maleic acid results in the transition of swelling mechanism from Fickian to non‐Fickian. The equilibrium mass swelling has been found to increase with pH of the swelling medium while increase in ionic strength causes a decrease in the swelling. The amount of maleic acid present in the hydrogel affects the swelling behavior in rather an unusual way. With lower acid contents, the equilibrium mass swelling increases while higher concentrations of maleic acid cause a decrease in the degree of swelling. The hydrogels have been found to undergo a number of swelling–deswelling cycles when pH of the swelling medium changes from 8.0 to 2.0. Hydrogels require more time to deswell compared to the time required for swelling, which has been explained on the basis of the fact that gels follow different mechanisms for the two processes. Various swelling parameters such as equilibrium mass swelling, diffusion coefficient, intrinsic diffusion coefficient, swelling exponent, etc., have been evaluated. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2782–2789, 2001     

Morphology and thermal behavior of organo‐bentonite clay/poly(styrene‐co‐methacrylic acid)/poly(isobutyl methacrylate‐co‐4‐vinylpyridine) nanocomposites

Poly(styrene‐co‐methacrylic acid) containing 29 mol % of methacrylic acid (SMA‐29) and poly(isobutyl methacrylate‐co‐4‐vinylpyridine) containing 20 mol % of 4‐vinylpyridine (IBM4VP‐20) were synthesized, characterized, and used to elaborate binary and ternary nanocomposites of different ratios with a 3% by weight hexadecylammonium‐modified bentonite from Maghnia (Algeria) by casting method from tetrahydrofuran (THF) solutions. The morphology and the thermal behavior of these binary and ternary elaborated nanocomposites were investigated by X‐ray diffraction, scanning electron microscopy, FTIR spectroscopy, differential scanning calorimetry, and thermogravimetry. Polymer nanocomposites and nanoblends of different morphologies were obtained. The effect of the organoclay and its dispersion within the blend matrix on the phase behavior of the miscible SMA29/IBM4VP20 blends is discussed. The obtained results showed that increasing the amount of SMA29 in the IBM4VP20/SMA29 blend leads to near exfoliated nanostructure with significantly improved thermal stability. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and properties of poly(ether‐ester‐amide)/poly(acrylonitrile‐co‐butadiene‐co‐styrene) antistatic blends

A novel antistatic agent poly(ether‐ester‐amide) (PEEA) based on caprolactam, polyethylene glycol, and 6‐aminocaproic acid was successfully synthesized by melting polycondensation. The structure, thermal properties, and antistatic ability of the copolymer were characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analyses, and ZC36 megohmmeter. Test results show that PEEA is a block copolymer with a melting point of 217°C and a thermal decomposition temperature of 409°C, together with a surface resistivity of 10⁸ Ω/sq. Antistatic poly(acrylonitrile‐co‐butadiene‐co‐styrene) (ABS) materials were prepared by blending different content of PEEA to ABS resin. The antistatic performances, morphology, and mechanical properties were investigated. It is indicated that the surface resistivity of PEEA/ABS blends decrease with the increasing PEEA content, and the excellent antistatic performance is obtained when the antistatic agent is up to 10–15%. The antistatic performance is hardly influenced by water‐washing and relative humidity, and a permanent antistatic performance is available. The antistatic mechanism is investigated. The compatibility of the blends was studied by scanning electron microscopy images. The ladder distribution of antistatic agent is formed, and a rich phase of antistatic agent can be found in the surface layer. The elongations at break of the blend are improved with the increasing antistatic agent; the tensile strength and the notched impact strength kept almost the same. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.