Multi-objective optimization of shield construction parameters based on random forests and NSGA-II

Metro shield construction will inevitably cause changes in the stress and strain state of the surrounding soil, resulting in stratum deformation and surface settlement (SS), which will seriously endanger the safety of nearby buildings, roads and underground pipe networks. Therefore, in the design and construction stage, optimizing the shield construction parameters (SCP) is the key to reducing the SS rate and increasing the safe driving speed (DS). However, optimization of existing SCP are challenged by the need to construct a unified multiobjective model for optimization that are efficient, convenient, and widely applicable. This paper innovatively proposes a hybrid intelligence framework that combines random forest (RF) and non-dominant classification genetic algorithm II (NSGA-II), which overcomes the shortcomings of time-consuming and high cost for the establishment and verification of traditional prediction models. First, RF is used to rank the importance of 10 influencing factors, and the nonlinear mapping relationship between the main SCP and the two objectives is constructed as the fitness function of the NSGA-II algorithm. Second, a multiobjective optimization framework for RF-NSGA-II is established, based on which the optimal Pareto front is calculated, and reasonable optimized control ranges for the SCP are obtained. Finally, a case study in the Wuhan Rail Transit Line 6 project is examined. The results show that the SS is reduced by 12.5% and the DS is increased by 2.5% with the proposed framework. Meanwhile, the prediction results are compared with the back-propagation neural network (BPNN), support vector machine (SVM), and gradient boosting decision tree (GBDT). The findings indicate that the RF-NSGA-II framework can not only meet the requirements of SS and DS calculation, but also used as a support tool for real-time optimization and control of SCP.     

A review of digital twin in product design and development

In the era of digitalization, there are many emerging technologies, such as the Internet of Things (IoT), Digital Twin (DT), Cloud Computing and Artificial Intelligence (AI), which are quickly developped and used in product design and development. Among those technologies, DT is one promising technology which has been widely used in different industries, especially manufacturing, to monitor the performance, optimize the progresses, simulate the results and predict the potential errors. DT also plays various roles within the whole product lifecycle from design, manufacturing, delivery, use and end-of-life. With the growing demands of individualized products and implementation of Industry 4.0, DT can provide an effective solution for future product design, development and innovation. This paper aims to figure out the current states of DT research focusing on product design and development through summarizing typical industrial cases. Challenges and potential applications of DT in product design and development are also discussed to inspire future studies.     

An IIoT-driven and AI-enabled framework for smart manufacturing system based on three-terminal collaborative platform

Smart manufacturing has great potential in the development of network collaboration, mass personalised customisation, sustainability and flexibility. Customised production can better meet the dynamic user needs, and network collaboration can significantly improve production efficiency. Industrial internet of things (IIoT) and artificial intelligence (AI) have penetrated the manufacturing environment, improving production efficiency and facilitating customised and collaborative production. However, these technologies are isolated and dispersed in the applications of machine design and manufacturing processes. It is a challenge to integrate AI and IIoT technologies based on the platform, to develop autonomous connect manufacturing machines (ACMMs), matching with smart manufacturing and to facilitate the smart manufacturing services (SMSs) from the overall product life cycle. This paper firstly proposes a three-terminal collaborative platform (TTCP) consisting of cloud servers, embedded controllers and mobile terminals to integrate AI and IIoT technologies for the ACMM design. Then, based on the ACMMs, a framework for SMS to generate more IIoT-driven and AI-enabled services is presented. Finally, as an illustrative case, a more autonomous engraving machine and a smart manufacturing scenario are designed through the above-mentioned method. This case implements basic engraving functions along with AI-enabled automatic detection of broken tool service for collaborative production, remote human-machine interface service for customised production and network collaboration, and energy consumption analysis service for production optimisation. The systematic method proposed can provide some inspirations for the manufacturing industry to generate SMSs and facilitate the optimisation production and customised and collaborative production.     

Design of data feature-driven 1D/2D convolutional neural networks classifier for recycling black plastic wastes through laser spectroscopy

In this study, two types of convolutional neural network (CNN) classifiers are designed to handle the problem of classifying black plastic wastes. In particular, the black plastic wastes have the property of absorbing laser light coming from spectrometer. Therefore, the classification of black plastic wastes remains still a challenging problem compared to classifying other colored plastic wastes using existing spectroscopy (i.e., NIR). When it comes the classification problem of black plastic wastes, effective classification techniques by the laser spectroscopy of Fourier Transform-Infrared Radiation (FT-IR) with Attenuated Total Reflectance (ATR) and Raman to analyze the classification problem of black plastic wastes are introduced. Due to the strong ability of extracting spatial features and remarkable performance in image classification, 1D and 2D CNN through data features are designed as classifiers. The technique of chemical peak points selection is considered to reduce data redundancy. Furthermore, through the selection of data features based on the extracted 1D data with peak points is introduced. Experimental results demonstrate that 2DCNN classifier designed with the help of 2D data feature selection as well as 1DCNN classifier shows the best performance compared with other reported methods for classifying black plastic wastes.     

Digital twin-driven clamping force control for thin-walled parts

Clamping quality is one of the main factors that will affect the deformation of thin-walled parts during their processing, which can then directly affect parts’ performance. However, traditional clamping force settings are based on manual experience, which is a random and inaccurate manner. In addition, dynamic clamping force adjustment according to clamping deformation is rarely considered in clamping force control process, which easily causes large clamping deformation and low machining accuracy. To address these issues, this study proposes a digital twin-driven clamping force control approach to improve the machining accuracy of thin-walled parts. The total factor information model of clamping system is built to integrate the dynamic information of the clamping process. The virtual space model is constructed based on finite element simulation and deep neural network algorithm. To ensure bidirectional mapping of physical-virtual space, the workflow of clamping force control and interoperability method between digital twin models are elaborated. Finally, a case study is used to verify the effectiveness and feasibility of the proposed method.     

Energy consumption mode identification and monitoring method of process industry system under unstable working conditions

Process industry systems under unstable working conditions are prone to potential anomalies, deviating from the original transition trajectory, and taking longer than expected to return to stability due to persistent disturbances from uncertainties and experience-based regulation errors. The energy waste caused by this situation has not received sufficient attention, and cannot be addressed by existing energy consumption monitoring methods. Herein, an energy consumption mode (ECM) identification and monitoring method under unstable working conditions is proposed, consisting of ECM identification model and multi-mode dynamic monitoring model, focusing on the variation rules of the correlation between energy consumption and other states of the system. In the ECM identification stage, the ECM correlation parameters that reflect the comprehensive production information are selected. Then, given the transfer characteristics of ECM, a Hidden Semi-Markov Model (HSMM) is constructed to fit the migration between modes and the duration within modes. The Variational Bayesian Gaussian Mixture Model is introduced to improve the HSMM, which solves the problem of lacking prior knowledge of ECM and achieves the automatic classification and online identification of ECM. In the dynamic monitoring stage of multi-ECMs, a series of dynamic kernel principle component analysis models are established, and the corresponding monitoring thresholds are set for each ECM. By calculating the maximum of the posteriori probability and the mode thresholds, the ECMs under unstable conditions can be accurately identified and automatically monitored. Compared with previous methods, the proposed method reduces the false detection rate and missed detection rate of abnormal ECM identification to 1.04% and 1.31% in the actual slag grinding production process, which proves its effectiveness.     

Advanced Electronic Signatures and eIDAS – Analysis of the Concept

We discuss the model of electronic signatures as described by the European eIDAS Regulation from the perspective of common understanding of electronic signatures in the cryptographic community. We show that these two perspectives do not present the same picture. The discrepancies between them may become opportunities as well as barriers for rapid deployment of electronic signatures and seals in business and administration.We focus particularly on validation of advanced electronic signatures and its interplay with the data protection requirements of GDPR. We show that by tweaking the existing technical standards one can reduce the number of problems and achieve compliance with both GDPR and eIDAS.Among others, we wish to bring attention to the evolving regulatory framework that without any doubt will have a substantial impact on the ecosystem of electronic signatures.     

A design method for an intelligent manufacturing and service system for rehabilitation assistive devices and special groups

The maturity of Industrial 4.0 technologies (smart wearable sensors, Internet of things [IoT], cloud computing, etc.) has facilitated the iteration and digitization of rehabilitation assistive devices (RADs) and the innovative development of intelligent manufacturing systems of RADs, expanding the value-added component of smart healthcare services. The intelligent manufacturing service mode, based on the concept of the product life cycle, completes the multi-source data production process analysis and the optimization of manufacturing, operation, and maintenance through intelligent industrial Internet of things and other means and improves the product life cycle management and operation mechanism. The smart product-service system (PSS) realizes the value-added of products by providing users with personalized products and value-added services, service efficiency, and sustainable development and gradually forms an Internet-product-service ecosystem. However, research on the PSS of RADs for special populations is relatively limited. Thus, this paper provides an overview of an IoT-based production model for RADs and a smart PSS-based development method of multimodal healthcare value-added services for special people. Taking the hand rehabilitation training devices for autistic children as a case, this paper verifies the effectiveness and availability of the proposed method. Compared with the traditional framework, the method used in this paper primarily helps evaluate rehabilitation efficacy, personalizes schemes for patients, provides auxiliary intelligent manufacturing service data and digital rehabilitation data for RAD manufacturers, and optimizes the product iteration development procedures by combining user-centered product interaction, multimodal evaluation, and value-added design. This study incorporates the iterative design of RADs into the process of smart PSS to provide some guidance to the RADs design manufacturers.     

Counterfactual inference to predict causal knowledge graph for relational transfer learning by assimilating expert knowledge --Relational feature transfer learning algorithm

Transfer learning (TL) is a machine learning (ML) method in which knowledge is transferred from the existing models of related problems to the model for solving the problem at hand. Relational TL enables the ML models to transfer the relationship networks from one domain to another. However, it has two critical issues. One is determining the proper way of extracting and expressing relationships among data features in the source domain such that the relationships can be transferred to the target domain. The other is how to do the transfer procedure. Knowledge graphs (KGs) are knowledge bases that use data and logic to graph-structured information; they are helpful tools for dealing with the first issue. The proposed relational feature transfer learning algorithm (RF-TL) embodies an extended structural equation modelling (SEM) as a method for constructing KGs. Additionally, in fields such as medicine, economics, and law related to people’s lives and property safety and security, the knowledge of domain experts is a gold standard. This paper introduces the causal analysis and counterfactual inference in the TL domain that directs the transfer procedure. Different from traditional feature-based TL algorithms like transfer component analysis (TCA) and CORelation Alignment (CORAL), RF-TL not only considers relations between feature items but also utilizes causality knowledge, enabling it to perform well in practical cases. The algorithm was tested on two different healthcare-related datasets — sleep apnea questionnaire study data and COVID-19 case data on ICU admission — and compared its performance with TCA and CORAL. The experimental results show that RF-TL can generate better transferred models that give more accurate predictions with fewer input features.     

The use of PCA and signal processing techniques for processing time-based construction settlement data of road embankments

Instrumentation is beneficial in civil engineering for monitoring structures during their construction and operation. The data collected can be used to observe real-time response and develop data-driven models for predicting future behaviour. However, a limited number of sensors are usually used for on-site civil engineering construction due to cost restrictions and practicalities. This results in relatively small raw datasets, which often contain errors and anomalies. Interpreting and making judicious use of the available dataset for developing reliable predictive model represents a significant challenge. Therefore, it is essential to pre-process and clean the data for improving their quality. To date, little investigation has been performed in the application of such data cleaning methods to geotechnical engineering datasets collected from full-scale sites. The purpose of this study is to apply simple and effective data pre-processing techniques to site-data collected from a highway embankment constructed on a sequence of soil layers of different physical make-up and non-linear consolidation characteristics. Various cleaning methods were applied to magnetic extensometer data collected for monitoring settlement within foundation soils beneath the embankment. PCA was used to explore raw data, identify and remove outliers. Numerous filtering and smoothing methods were used to clean noise in the data and their results were further compared using RMSE and NMSE. The methods adopted for data pre-processing and cleaning proved very effective for capturing the raw settlement behaviour on site. The findings from this study would be useful to site engineers regarding complex decision-making relating to ground response due to embankment construction. This also has positive prospects for developing dynamic prediction models for embankment settlement.     

Deterministic and probabilistic ship pitch prediction using a multi-predictor integration model based on hybrid data preprocessing,reinforcement learning and improved QRNN

The deterministic and probabilistic prediction of ship motion is important for safe navigation and stable real-time operational control of ships at sea. However, the volatility and randomness of ship motion, the non-adaptive nature of single predictors and the poor coverage of quantile regression pose serious challenges to uncertainty prediction, making research in this field limited. In this paper, a multi-predictor integration model based on hybrid data preprocessing, reinforcement learning and improved quantile regression neural network (QRNN) is proposed to explore the deterministic and probabilistic prediction of ship pitch motion. To validate the performance of the proposed multi-predictor integrated prediction model, an experimental study is conducted with three sets of actual ship longitudinal motions during sea trials in the South China Sea. The experimental results indicate that the root mean square errors (RMSEs) of the proposed model of deterministic prediction are 0.0254°, 0.0359°, and 0.0188°, respectively. Taking series #2 as an example, the prediction interval coverage probabilities (PICPs) of the proposed model of probability predictions at 90%, 95%, and 99% confidence levels (CLs) are 0.9400, 0.9800, and 1.0000, respectively. This study signifies that the proposed model can provide trusted deterministic predictions and can effectively quantify the uncertainty of ship pitch motion, which has the potential to provide practical support for ship early warning systems.     

A cooperative game theory based user-centered medical device design decision approach under uncertainty

The medical device conceptual design decision-making is a process of coordinating pertinent stakeholders, which will significantly affect the quality of follow-up market competitiveness. However, as the most challenging parts of user-centered design, traditional methods are mainly focusing on determining the priorities of the evaluation criteria and forming the comprehensive value (utility) of the conceptual scheme, may not fully deal with the interaction and interdependent between the conflicts of interest among stakeholders and weigh the ambiguous influence on the overall design expectations, which results in the unstable decision-making results. To overcome this drawback, this paper proposes a cooperative game theory based decision model for device conceptual scheme under uncertainty. The proposed approach consists of three parts: first part is to collect and classify needs of end users and professional users based on predefined evaluation criteria; second part is using rough set theory technique to create criteria correlation diagram and scheme value matrix from users; and third part is developing the fuzzy coalition utility model to maximize the overall desirability through the criteria correlation diagram with the conflict of interests of end and professional users considered, and then selecting the optimal scheme. A case study of blood pressure meter is used to illustrate the proposed approach and the result shows that this approach is more robust compared with the widely used the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) approach.     

A three-stage multi-objective heterogeneous integrated model with decomposition-reconstruction mechanism and adaptive segmentation error correction method for ship motion multi-step prediction

Reliable and accurate ship motion prediction is essential for ship navigation at sea and marine operations. Although previous studies have yielded rich results in the field of ship motion prediction, most of them have ignored the importance of the dynamic characteristics of ship motion for constructing forecasting models. Besides, the limitations of the single model and the autocorrelation characteristics of the residual series are also unfavorable factors that hinder the forecasting performance. To fill these gaps, a multi-objective heterogeneous integration model based on decomposition-reconstruction mechanism and adaptive segmentation error correction method is proposed in this paper for ship motion multi-step prediction. Specifically, the proposed model is divided into three stages, which are decomposition-reconstruction mechanism, multi-objective heterogeneous integration model and adaptive segmentation error correction method. The effectiveness of the proposed model is verified using four sets of real ship motion data collected from two sites in the South China Sea. The evaluation results show that the proposed model can effectively improve the prediction performance and outperforms other traditional models and state-of-the-art models in the field of ship motion prediction. Prospectively, the model proposed in this study can be used as an effective aid to ship warning systems and has the potential for practical application in ship marine operations.     

Palette designer: A color-code design tool

The US Federal Aviation Administration (FAA) has developed a standard set of colors for coding information on air traffic control (ATC) displays. A significant complication was that the air traffic controller population includes people who have color-vision deficiencies (CVDs). We wrote a software tool to assist the FAA in selecting a preliminary color set. It accepts a set of luminances and chromaticity coordinates as input and: (1) Draws graphics and calculates color-related figures of merit to predict whether the set will be acceptable for color-normal and CVD users; (2) Flags colors and pairings that violate human factors criteria; and (3) Allows designers to adjust the colors and see the resulting changes immediately. The tool has been used to perform a pilot study for the FAA’s color-set development project and should be useful for designing other color-coding sets, also.     

Are knee savers and knee pads a viable intervention to reduce lower extremity musculoskeletal disorder risk in residential roofers?

One factor commonly associated with musculoskeletal disorder risk is extreme postures. To lessen this risk, extreme postures should be reduced using proactive and prevention-focused methods. The effect of combinations of two interventions, knee pads and knee savers, on lower extremity kinematics during deep or near full flexion kneeling on differently sloped surfaces was analyzed. Nine male subjects were requested to keep a typical resting posture while kneeling on a sloped roofing simulator with and without knee pads and knee savers. Three-dimensional peak knee kinematics were recording using a motion capture system. The kinematic data were analyzed with a two-way—4(intervention) X 3(slope)—repeated measure analysis of variance (ANOVA). It was observed that knee pads did not alter lower extremity kinematics in a way that may reduce musculoskeletal injury risk, but they do provide comfort. Knee savers did statistically significantly reduce peak lower extremity kinematics, however these changes were small and it is uncertain if the changes will reduce musculoskeletal injury risk. This study has provided initial data that supports the use of knee savers as a potential intervention to reduce musculoskeletal disorder risk due to lower extremity joint angles on a sloped surface, nonetheless, further testing involving other musculoskeletal disorder risk factors is needed prior to a conclusive recommendation.     

Poly(vinyl alcohol)-based photosensitive water-borne coating for low-temperature color-filter production

A photosensitive water-borne overcoat comprising poly(vinyl alcohol), a glycoluril crosslinker, and a water-soluble photoacid generator was developed. The passivation coating has two features: low-temperature processability and applicability to organic-solvent-susceptible films. Photo-exposure and subsequent baking at 85 °C and development with water produced PGMEA-insoluble and transparent overcoat patterns. Uncured color patterns that were susceptible to the PGMEA-based coating solution remained intact after water-based overcoat application. By exploiting the features of the passivation coating, color patterns of green, red, and white were produced onto a glass substrate at a process temperature of 85 °C.     

Production logistics digital twins: Research profiling,application, challenges and opportunities

In the era of Industry 4.0, Production Logistic Digital Twins (PLDTs) have garnered remarkable attention from both academic and industrial communities. This is evident from the growing number of research publications on PLDTs in international scientific journals and conferences. However, given the diversity and complexity of production logistics activities, there is a pressing need for systematic literature review to chart past research and identify potential directions for future endeavors. Therefore, this study primarily focuses on the application of Digital Twins (DTs) in Production Logistics (PL). Firstly, an analysis of PLDTs research profiling is carried out based on general trends, keywords, application scenarios, and basic functions. Secondly, the functional characteristics of PLDTs are examined while summarizing their advantages and limitations across various application scenarios such as transportation, packaging, warehousing, material distribution, and information processing. And the roles played by smart technologies such as Internet of Things (IoT) in PLDTs system are discussed. Finally, possible challenges and future directions of PLDTs in industrial application are presented, accompanied by appropriate classification and extensive recommendations.     

Effect of working position and cold environment on muscle activation level and fatigue in the upper limb during manual work tasks

Several occupational groups are exposed to periods of low ambient temperatures while performing manual work tasks outdoors. Work tasks typically include heavy lifting, tool handling, and overhead work. This study evaluated the effect of working position and cold environment on muscle activation level (%RMS_max) and fatigue in the upper limb during manual work tasks. Fourteen male participants (25 ± 3 years, 80.9 ± 6.4 kg, 182 ± 5 cm) completed a 2-h test protocol consisting of five test periods alternating with four work periods, wearing identical sets of clothing, under cold (−15 °C) and control (5 °C) conditions. The work periods consisted of manual work at the hip level, manual overhead work, and a lifting exercise. The test periods consisted of isometric maximal voluntary contractions (MVC) and seated rest. Skin temperatures decreased during cold exposure, especially in the extremities. %RMS_max in the forearm was higher in the cold condition both during overhead work and work at the hip level than that for the same work in the control condition, especially at the end of the test when the difference was approximately 25% (equating to 2–3 %RMS_max). For the middle deltoid muscle, the %RMS_max was approximately three times (or 10 %RMS_max) higher during overhead work than work at the hip level, but there was no additional cost of working in the cold. Signs of deltoid muscle fatigue (decrease in electromyography median power frequency and an increase in %RMS_max) were observed during the overhead work periods in both temperature conditions. No decrease in MVC, as a sign of overall muscle fatigue, was observed in either condition.Relevance to industryThis study demonstrated that when wearing suitable cold-weather protective clothing, the adverse effect of work posture is much higher than that of cold on muscle demand and physical strain.     

A digital twin-based multidisciplinary collaborative design approach for complex engineering product development

With the ever-increasing demand for personalized product functions, product structure becomes more and more complex. To design a complex engineering product, it involves mechanical, electrical, automation and other relevant fields, which requires a closer multidisciplinary collaborative design (MCD) and integration. However, the traditional design method lacks multidisciplinary coordination, which leads to interaction barriers between design stages and disconnection between product design and prototype manufacturing. To bridge the gap, a novel digital twin-enabled MCD approach is proposed. Firstly, the paper explores how to converge the MCD into the digital design process of complex engineering products in a cyber-physical system manner. The multidisciplinary collaborative design is divided into three parts: multidisciplinary knowledge collaboration, multidisciplinary collaborative modeling and multidisciplinary collaborative simulation, and the realization methods are proposed for each part. To be able to describe the complex product in a virtual environment, a systematic MCD framework based on the digital twin is further constructed. Integrate multidisciplinary collaboration into three stages: conceptual design, detailed design and virtual verification. The ability to verify and revise problems arising from multidisciplinary fusions in real-time minimizes the number of iterations and costs in the design process. Meanwhile, it provides a reference value for complex product design. Finally, a design case of an automatic cutting machine is conducted to reveal the feasibility and effectiveness of the proposed approach.