Si含量对CO_2加氢制烃铁基催化剂的影响

以湿固相研磨法制备不同硅含量的铁基催化剂,采用X射线衍射、H2程序升温还原和傅里叶红外光谱对催化剂进行表征,在V(H_2)∶V(CO_2)∶V(N_2)=16∶8∶1、反应压力1.6 MPa、反应温度230℃、反应时间48 h和空速6 000 m L·(h·g-cat)-1条件下,在固定床反应器中考察催化剂的CO_2加氢制烃反应活性和烃类选择性。结果表明,随着Si O_2掺入量增加,催化剂的还原性能降低,结晶度呈下降趋势,CO_2转化率下降,但C5+烃类产物选择性在硅含量为10%时达到最大,为38.6%。     

ZrO2/SiO2- and La2O3/Al2O3-supported platinum catalysts for CH4/CO2 reforming

Surface-phase ZrO₂ on SiO₂ (SZrOs) and surface-phase La₂O₃ on Al₂O₃ (SLaOs) were prepared with various loadings of ZrO₂ and La₂O₃, characterized and used as supports for preparing Pt/SZrOs and Pt/SLaOs catalysts. CH₄/CO₂ reforming over the Pt/SZrOs and Pt/SLaOs catalysts was examined and compared with Pt/Al₂O₃ and Pt/SiO₂ catalysts. CO₂ or CH₄ pulse reaction/adsorption analysis was employed to elucidate the effects of these surface-phase oxides.

The zirconia can be homogeneously dispersed on SiO₂ to form a stable surface-phase oxide. The lanthana cannot be spread well on Al₂O₃, but it forms a stable amorphous oxide with Al₂O₃. The Pt/SZrOs and Pt/SLaOs catalysts showed higher steady activity than did Pt/SiO₂ and Pt/Al₂O₃ by a factor of three to four. The Pt/SZrOs and Pt/SLaOs catalysts were also much more stable than the Pt/SiO₂ and Pt/Al₂O₃ catalysts for long stream time and for reforming temperatures above 700 °C. These findings were attributed to the activation of CO₂ adsorbed on the basic sites of SZrOs and SLaOs.     

Mechanistic study of partial oxidation of methane to synthesis gas over supported rhodium and ruthenium catalysts using in situ time-resolved FTIR spectroscopy

In situ time-resolved FTIR spectroscopy was used to study the reaction mechanism of partial oxidation of methane to synthesis gas and the interaction of CH₄/O₂/He (2/1/45) gas mixture with adsorbed CO species over SiO₂ and γ-Al₂O₃ supported Rh and Ru catalysts at 500–600°C. It was found that CO is the primary product for the reaction of CH₄/O₂/He (2/1/45) gas mixture over H₂ reduced and working state Rh/SiO₂ catalyst. Direct oxidation of methane is the main pathway of synthesis gas formation over Rh/SiO₂ catalyst. CO₂ is the primary product for the reaction of CH₄/O₂/He (2/1/45) gas mixture over Ru/γ-Al₂O₃ and Ru/SiO₂ catalysts. The dominant reaction pathway of CO formation over Ru/γ-Al₂O₃ and Ru/SiO₂ catalysts is via the reforming reactions of CH₄ with CO₂ and H₂O. The effect of space velocity on the partial oxidation of methane over SiO₂ and γ-Al₂O₃ supported Rh and Ru catalysts is consistent with the above mechanisms. It is also found that consecutive oxidation of surface CO species is an important pathway of CO₂ formation during the partial oxidation of methane to synthesis gas over Rh/SiO₂ and Ru/γ-Al₂O₃ catalysts.     

Liquid phase methanol reforming with water over silica supported Pt–Ru catalysts

The mechanism of the liquid phase methanol reforming reaction over silica supported Pt–Ru catalyst was investigated by kinetic studies, employing a pyrex glass reactor with reflux condensers connected to a closed gas circulation system under ambient pressure. The rate of H₂ formation over Pt–Ru/SiO₂ catalysts was more than 20 times faster than that over Pt/SiO₂ catalysts with high selectivity for CO₂ (72.3%), indicating a marked addition effect of Ru. In the case of HCHO–H₂O reaction over Pt–Ru/SiO₂, the H₂ formation rate was five times larger than that in the CH₃OH–H₂O reaction but selectivity to CO₂ was only 4%. On the contrary, in the HCOOCH₃–H₂O and HCOOH–H₂O reactions, both high activity and selectivity were observed over Pt–Ru/SiO₂. These results clearly indicate that the CO₂ formation does not proceed via HCHO decomposition and following water gas shift reaction. We propose the following pathway for liquid phase methanol reforming reaction over Pt–Ru/SiO₂; a partly dehydrogenated methanol (CH₂OH^*) is the initial reaction intermediate, from which H₂ and CO₂ are formed through HCOOCH₃ and HCOOH as the successive reaction intermediates.     

MnOx助剂对Fe/SiO2催化剂费-托合成制低碳烯烃动力学的影响

探讨了MnO_x助剂对Fe/SiO₂催化剂经由费-托反应(Fischer-Tropsch)制备低碳烯烃(FTO)的影响。通过浸渍法制备了Fe₂₀/SiO₂和Fe₂₀-Mn_1.0/SiO₂催化剂,结果表明MnO_x助剂显著提升了CO转化率和C₂～C₄烯烃的时空收率。程序升温吸附实验表明MnO_x助剂增加了Fe基催化剂表面碱性,促进了CO的解离吸附。运用幂指数模型,研究了Fe₂₀/SiO₂和Fe₂₀-Mn_1.0/SiO₂催化剂上FTO反应动力学,得到了各产物生成活化能与H₂/CO反应级数。最后,结合动力学研究与程序升温表征结果,对Fe基催化剂FTO反应机理,尤其是MnO_x助剂提高Fe₂₀/SiO₂催化剂上低碳烯烃选择性的作用进行了讨论。     

助剂二氧化硅对CO2加氢制备甲醇CuO-ZnO-Al2O3-ZrO2催化剂性能的影响

采用共沉淀法制备了一系列CuO-ZnO-Al₂O₃-ZrO₂(CZAZ)催化剂,用于二氧化碳加氢合成甲醇。通过加入少量的助剂二氧化硅得到了一系列CZAZ/SiO₂改性催化剂。采用XRD、BET、H₂-TPR、NH₃-TPD以及CO₂-TPD等技术进行表征,研究了助剂二氧化硅含量对催化剂的物理化学性质以及组织结构的影响。结果表明,助剂二氧化硅的含量对催化剂的组织结构具有较大的影响。同时评价了该组催化剂参与二氧化碳加氢合成甲醇反应的催化性能。测试结果表明,采用助剂二氧化硅质量分数为4%的改性催化剂,表现出较为优良的催化活性。助剂二氧化硅促进了活性组分氧化铜的分散,并且经过二氧化硅改性的CZAZ催化剂具有更大的比表面积,这些因素都对该催化剂在二氧化碳加氢合成甲醇方面的良好表现起到重要作用。     

逆水煤气变换耦合乙烷脱氢反应中载体对氧化铬催化剂性能的影响

研究了在逆水煤气变换耦合乙烷脱氢反应中担载型氧化铬催化剂的活性,考察了多种载体对于催化剂反应性能的影响。结果表明,不同的载体所担载的氧化铬催化剂具有不同的催化性能。其中二氧化硅担载的氧化铬催化剂具有较高的乙烷转化率和乙烯选择性,在700℃时分别达到30.7%和96.5%。CO₂的作用是通过与H₂反应促进乙烷脱氢、并减少催化剂表面积炭。运用XRD、TPR、 XPS、UV-DRS和微量吸附量热技术对催化剂体相与表面结构、表面酸性和铬物种价态等进行了表征,结果显示催化剂表面酸中心适当的强度、数量和分布有利于乙烷的活化和催化转化,Cr³⁺和Cr⁶⁺物种是反应的活性中心。     

CO2合成醇酯类化学品和高分子材料研究进展

我国作为煤炭大国,燃烧化石燃料产生大量CO₂。通过化学作用将CO₂转化为能源燃料、基础化学品或高分子材料,有利于实现碳氧资源综合利用。从CO₂直接利用和间接利用的角度出发,分别综述了CO₂资源化利用研究进展。直接利用方面,重点阐述了CO₂直接加氢合成甲醇和乙醇;同时CO₂可作为羰化剂合成有机碳酸酯和高分子材料,包括碳酸二乙酯、聚碳酸酯和CO₂基可降解聚合物。在间接利用方面,重点综述了CO₂经碳酸乙烯酯的酯交换反应合成碳酸二甲酯,以及碳酸乙烯酯加氢制备甲醇联产乙二醇的研究进展。CO₂加氢直接合成甲醇催化剂主要包括铜基催化剂、贵金属催化剂,由于贵金属的成本高,廉价的Cu基催化剂研究较为广泛。CO₂加氢直接合成乙醇研究较广泛的催化剂为贵金属(Rh、Pd、Ru)基催化剂体系,还需进一步研究廉价、高活性和高稳定性的催化剂。CO₂与乙醇直接合成碳酸二乙酯(DEC)研究较多的催化剂为铈基多相催化剂,但由于生成物中水分的影响,限制了DEC的收率。环氧化物和CO₂耦合反应生成DEC过程中不产生水,可以有效克服热力学的限制,因此高能化合物与CO₂的耦合路线是高效制备DEC的有效途径。CO₂与环氧化物共聚制备聚碳酸酯材料多采用稀土三元催化剂体系,环氧化物的转化率和聚碳酸酯选择性较高,目前已经实现工业应用。CO₂通过碳酸乙烯酯与甲醇酯交换合成DMC,多使用碱性较强的催化剂和含碱性基团的离子交换树脂。CO₂经碳酸乙烯酯加氢制备甲醇和乙二醇的反应中,铜基催化剂展现出优异的催化性能。CO₂化学转化利用是CO₂碳氧资源综合利用的重要途径,将有效支撑我国未来碳中和目标实现。     

Effect of copper species and the presence of reaction products on the activity of methane oxidation on supported CuO catalysts

The activity of the various CuO species found in supported copper catalysts and the effect of the presence of reaction products, CO₂ and H₂O, was studied during the complete oxidation of methane. Series of copper catalysts supported on ZrO₂, Al₂O₃ and SiO₂ with different metal concentrations were analyzed under identical experimental conditions of reactant concentration and temperature. The catalysts were characterized by TPR, UV–vis spectroscopy and XRD. The results show that the activity of supported CuO is closely related to the kind of Cu species formed on the different supports. It was found that the Cu species formed on ZrO₂ and Al₂O₃ are dependent on the metal loading/support's surface area ratio, and that the activity of highly dispersed Cu is substantially higher than that of bulk CuO. In the case of silica, only the formation of bulk CuO was detected, accounting for the low activity of CuO/SiO₂ catalysts. The activity of highly dispersed Cu species formed on ZrO₂ is higher than those formed over Al₂O₃, and it is not significantly affected by the formation of bulk CuO on the surface. On the contrary, the activity of copper species formed on alumina decreases continuously as the Cu loading is increased. Thus, for the range of copper loading studied in this work, the activity of the catalysts, per gram of loaded Cu, follows the sequence: CuO/ZrO₂ > CuO/Al₂O₃  CuO/SiO₂. It was also found that CO₂ does not inhibits the activity of the CuO/ZrO₂ catalysts, while water inhibits the combustion reaction of methane, with an estimated reaction order of about −0.2 for temperatures between 360 °C and 420 °C.     

Fischer–Tropsch synthesis over Co–SiO2 catalysts prepared by the sol–gel method

Fischer–Tropsch synthesis was carried out in slurry phase over uniformly dispersed Co–SiO₂ catalysts prepared by the sol–gel method. When 0.01–1 wt.% of noble metals were added to the Co–SiO₂ catalysts, a high and stable catalytic activity was obtained over 60 h of the reaction at 503 K and 1 MPa. The addition of noble metals increased the reducibility of surface Co on the catalysts, without changing the particle size of Co metal significantly. High dispersion of metallic Co species stabilized on SiO₂ was responsible for stable activity. The uniform pore size of the catalysts was enlarged by varying the preparation conditions and by adding organic compounds such as N,N-dimethylformamide and formamide. Increased pore size resulted in decrease in CO conversion and selectivity for CO₂, a byproduct, and an increase in the olefin/paraffin ratio of the products. By modifying the surface of wide pore silica with Co–SiO₂ prepared by the sol–gel method, a bimodal pore structured catalyst was prepared. The bimodal catalyst showed high catalytic performance with reducing the amount of the expensive sol–gel Co–SiO₂.     

载体表面羟基种类对DMO加氢用Cu/SiO2催化剂性能的影响

通过程序升温焙烧改变气相纳米二氧化硅表面的羟基含量及种类,并以其为载体,采用蒸氨法制备了Cu/SiO₂催化剂,使用比表面积测试（BET）、傅里叶变换红外光谱（FTIR）、漫反射傅里叶变换红外光谱（DRIFT）、X射线衍射（XRD）、透射电子显微镜（TEM）、H₂程序升温还原（H₂-TPR）、NH₃/CO₂程序升温脱附（NH₃/CO₂-TPD）、X射线光电子能谱（XPS）、俄歇电子能谱（AES）等方法研究了Cu/SiO₂催化剂的结构和酸碱性,采用固定床反应器在低温（448K）、低压（1.5MPa）的反应条件下进行草酸二甲酯加氢制备乙二醇的反应,评价其催化活性。结果表明,高温焙烧二氧化硅载体可显著改变后续合成Cu/SiO₂催化剂的结构并降低其酸碱性,对提高乙二醇选择性和降低草酸二甲酯加氢过程中醇类或醚类副产物的选择性具有明显的促进作用。但同时该过程会导致催化剂的活性降低,载体焙烧（473K）后合成的催化剂均需要提高氢酯比方能获得最佳反应结果。其中经873K焙烧的二氧化硅制备的Cu/SiO₂-4催化剂,在最佳反应条件下乙二醇的选择性由低温焙烧后的92%左右提升到97%以上,草酸二甲酯转化率保持在100%。     

Mechanistic evidence of the partial oxidation of methane to formaldehdye over silica based oxide catalysts by temperature programmed reaction studies

The catalytic behaviour of SiO₂ supported MoO₂ and V₂O₅ catalysts in the partial oxidation of methane to formaldehyde with O₂ (MPO) in the range 400–800°C has been investigated by temperature programmed reaction (TPR) tests. Both the sequence of the onset temperature of product formation and the product distribution patterns signal that MPO on silica based oxide catalysts occurs mainly via a consecutive reaction path: CH₄ → HCHO → CO → CO₂. At T >/ 700°C a parallel surface assisted gas-phase reaction pathway leads to the formation of minor amounts of C₂ products both on SiO₂ and MoO₃/SiO₂ catalysts. The redox properties of MoO₃/SiO₂ and V₂O₅SiO₂ catalysts have been systematically evaluated by H₂ and CH₄ temperature programmed reduction (H₂-TPR, CH₄-TPR) measurements. H₂-TPR results do not account for the reactivity scale of oxide catalysts in the MPO. CH₄-TPR measurements indicate that the enhancement in the specific activity of the silica is controlled by the capability of MoO₃ and V₂O₅ promoters in providing ‘active’ lattice oxygen species.     

二氧化碳甲烷化催化剂的研究进展

CO₂催化加氢甲烷化反应是温室气体CO₂资源化利用的有效途径之一。本文回顾了CO₂催化加氢甲烷化催化剂的研究现状, 其中Ni基催化剂是研究最为广泛的CO₂甲烷化催化剂。重点介绍了Al₂O₃、SiO₂和La₂O₃载体及CeO₂和La₂O₃助剂等对Ni基催化剂CO₂甲烷化性能的影响, 阐述了载体的结构、电子性能、化学性能和助剂等对Ni基催化剂CO₂甲烷化性能的影响。结合几种非Ni基CO₂甲烷化催化剂的对比研究发现, 具有有序介孔结构的Co基催化剂也表现出了优越的CO₂甲烷化性能。由此表明, 催化剂新颖的结构也是影响CO₂甲烷化性能的重要因素, 通过催化剂结构、组成等的调变, 能实现CO₂低温高效甲烷化, 为CO₂甲烷化工业化进程奠定基础。     

Ni/Al_2O_3催化剂的CO_2-TPD表征

Ni/Al_2O_3催化剂是甲烷二氧化碳重整反应制取合成气研究最多、最具应用潜力的一种催化剂。通过对催化剂进行CO_2-TPD研究,考察还原态Ni/Al_2O_3催化剂的CO_2脱附特性。结果表明,浸渍法制备的Ni/Al_2O_3催化剂CO_2脱附曲线呈现双峰,分别在(60~65)℃和(350~380)℃出现高低温两个活性位;高温CO_2吸附量为3.0 cm~3·g~(-1),低温CO_2吸附量为24.0 cm~3·g~(-1)。催化剂的CO_2吸附量与其Ni含量无关。考察选用不同载体的CO_2脱附行为,发现以Al_2O_3为载体的催化剂CO_2吸附量是MgO和SiO_2为载体催化剂的2~4倍,以TiO_2为载体的催化剂几乎不吸附CO_2。     

Catalytic conversion of methane and CO2 to synthesis gas over a La2O3-modified SiO2 supported Ni catalyst in fluidized-bed reactor

In this contribution, a commercial spherical SiO₂ was modified with different amounts of La₂O₃, and used as the support of Ni catalysts for autothermal reforming of methane in a fluidized-bed reactor. Nitrogen adsorption, XRD and H₂-TPR analysis indicated that La₂O₃-modified SiO₂ had higher surface area, strengthened interaction between Ni and support, and improved dispersion of Ni. CO₂-TPD found that La₂O₃ increased the alkalescence of SiO₂ and improved the activation of CO₂. Coking reaction (via both temperature-programmed surface reaction of CH₄ (CH₄-TPSR) and pulse decomposition of CH₄) disclosed that La₂O₃ reduced the dehydrogenation ability of Ni. CO₂-TPO, O₂-TPO (followed after CH₄-TPSR) confirmed that only part amount of carbon species derived from methane decomposition could be removed by CO₂, and O₂ in feed played a crucial role for the gasification of the inactive surface carbons. Ni/xLa₂O₃-SiO₂ (x = 10, 15, 30) possessed high activity and excellent stability for autothermal reforming of methane in a fluidized-bed reactor.     

Supported base metal catalysts for the preferential oxidation of carbon monoxide in the presence of excess hydrogen (PROX)

Supported base metal catalysts were tested for the preferential oxidation of CO (CO PROX). The catalysts we investigated covered a wide range of transition metals (Co, Cr, Cu, Ni, Zn) supported on oxides with very different acidic, basic and redox properties (MgO, La₂O₃, SiO₂–Al₂O₃, CeO₂, Ce_0.63Zr_0.37O₂). The influence of the metal loading (Cu), the support properties (acidity, basicity, redox, surface area) and the reaction conditions (reaction temperature, feed composition) on the catalyst activity and selectivity was evaluated. The activity of ceria and ceria–zirconia supported copper catalysts was comparable to the performances of noble metal samples classically used for the PROX reaction. In addition, Cu–CeO₂ catalysts showed a practically constant and high selectivity towards CO oxidation in the temperature range of 50–150 °C. Due to the strong synergetic effect between copper and ceria, only a small amount of copper (0.3 wt.%) was necessary to get an active catalyst. The best catalytic performances were obtained for the samples containing 1–3 wt.% copper. The presence of small copper particles in close interaction with the ceria support was shown to be responsible for the enhanced activity. Except for the hydrogen oxidation, no parallel reactions (CO or CO₂ methanation reactions, coking, RWGS) could be detected over these catalysts. Classically, an increase of the oxygen excess led to an increased CO conversion with a simultaneous loss of selectivity towards CO₂. Finally, the presence of CO₂ in the feed negatively affected the catalytic activity. This effect was attributed to the adsorption of CO₂ on the copper sites, probably as CO.     

Simultaneous HDS and HDN over supported PtSn catalysts in comparison to commercial NiMo/Al2O3

The performance of platinum-tin catalysts, supported on Al₂O₃ and SiO₂ and subjected to reduction prior to use, has been studied. The catalysts were characterized in reduced forms by X-ray diffraction (XRD) and XPS. The surface properties were determined by N₂ BET specific surface area and CO chemisorption. The model compounds were 4,6-dimethyldibenzothiophene (4,6DMDBT) and carbazole. The PtSn catalysts supported on either Al₂O₃ or SiO₂ were characterised by high activity, but the catalyst PtSn/SiO₂ was found the most effective, even more effective than the commercial KF848 catalyst. Both PtSn catalysts studied were more effective in the reaction of 4,6DMDBT hydrogenation, the dominant product obtained with the use of PtSn/Al₂O₃ was methyl-cyclohexyltoluene (MCHT) and with PtSn/SiO₂ the dominant product was dimethylbicyclohexyl (DMBCH). The amount of dimethylbiphenyl (DMBPh) obtained was small and practically independent of the contact time. In the HDN reaction of carbazole the most active was PtSn/SiO₂. It was also more active in the consecutive reaction of isomerisation of the main product of the HDN reaction, bicyclohexyl (BCH) to methylcyclopentylcyclohexane (MCPCH). The large differences shown in the hydrotreating activity specially in the HDN reaction between PtSn catalysts supported on Al₂O₃ and SiO₂ result from the physicochemical properties of both samples. The significantly higher CO chemisorption for PtSn/SiO₂ indicates the presence of larger amount of metallic species and better hydrogenation properties so important for deep hydrotreating process.     

Photocatalytic conversion of CH4 and CO2 to oxygenated compounds over Cu/CdS–TiO2/SiO2 catalyst

Coupled semiconductor (CS) Cu/CdS–TiO₂/SiO₂ photocatalyst was prepared using a mutli-step impregnation method. Its optical property was characterized by UV–vis spectra. BET, XRD, Raman and IR were used to study the structure of the photocatalyst. Fine CdS was found dispersed over the surface of anatase TiO₂/SiO₂ substrate. Chemisorption and IR analysis showed methane absorbed in the molecular state interacted weakly with the surface of catalyst, and the interaction of CO₂ with CS produced various forms of absorbed CO₂ species that were primarily present in the form of formate, bidentate and linear absorption species. Photocatalytic direct conversion of CH₄ and CO₂ was performed under the operation conditions: 373 K, 1:1 of CO₂/CH₄, 1 atm, space velocity of 200 h⁻¹ and UV intensity of 20.0 mW/cm². The conversion was 1.47% for CH₄ and 0.74% for CO₂ with a selectivity of acetone up to 92.3%. The reaction mechanisms were proposed based on the experimental observations.     

Free-radical reactions involved in C1-C3 hydrocarbons interaction with oxide catalysts

Experimental proofs of a free radical mechanism in methane oxidative coupling, with homolytic rupture of the C---H bond are given. High concentrations of free radical sites are produced by mechanical milling of SiO₂. A study of C₁---C₃alkanes interaction with these sites allows to simulate the, processes of alkanes oxidation and oxidative dehydrogenation. The reactivity of ethane and propane is higher than that of methane in accordance with the Polanyi-Semenov rule. Oxidative dehydrogenation of ethane is studied on Cd-containing zeolites. CH₄, C₂H₆ and C₃H₈ oxidative dehydrogenation by O₂ or CO₂ is studied on a MNO/SiO₂ catalyst. The initiation of radical reactions of hydrocarbons on Cl-containing catalysts proceeds via chlorine atoms generation.     

Synthesis of methacrylic acid by aldol condensation of propionic acid with formaldehyde over acid–base bifunctional catalysts

A variety of catalysts consisting of MgO, SiO₂, Al₂O₃ and ZrO₂, with and without added cesium, were evaluated in the aldol condensation of propionic acid with formaldehyde to produce methacrylic acid. Reactions were performed in a fixed-bed reactor operating at atmospheric pressure and 598 K. Stepwise TPD of pre-adsorbed NH₃ and CO₂ was used to estimate the number and strength of surface acid and base sites, respectively. Both a strong solid base such as MgO and a non-basic solid such as SiO₂ were ineffective at catalyzing the aldol condensation reaction. However, Cs-loaded silica and alumina exhibited moderate activity and high selectivity for the reaction. Results from reactivity measurements and surface characterization suggest that both acid and base sites are needed to catalyze the reaction, and the observed rates over the bifunctional ZrO₂ catalyst support this hypothesis. A reversible inhibition of the rate by added water was observed over Cs–SiO₂ and is attributed to migration and agglomeration of the cesium on the support in the presence of water.