共查询到20条相似文献,搜索用时 109 毫秒
1.
针对重庆朝阳气体有限公司新建18000m3/h制氧机工程,从方案选型、设备招标、优化工程建设等方面,介绍了整个制氧机工程建设情况,全面控制了工程投资. 相似文献
2.
《冶金动力》2003,(3)
马钢“十五”重点工程配套项目———气体分公司新建20000m3/h和40000m3/h制氧机组工程,日前土建已近尾声,部分大型设备已运到现场,即将进入安装阶段。为适应马钢生产发展的需要,投资3.4亿元的40000m3/h制氧机组引进法国林德公司设备,于2002年11月28日开工,计划2004年3月底氧气并网。而投资1.3亿元的20000m3/h制氧机组三大机分别引进法国、美国和意大利、杭州制氧机厂,于2003年2月28日开工建设,计划2003年底投运。目前,两大机组的空压机、氮压机、氧压机三大机土建已完工,冷箱的钢结构正在制作,水泵房、冷箱基础、电控和仪表楼正在建设之中… 相似文献
3.
主要介绍了马钢公司30000 m3/h制氧机工程中冷箱基础珠光砂混凝土的试配、检验与施工。 相似文献
4.
工程建设就是要实现"工期、质量、投资"三大控制目标,确保建成后能够达到预期收益.实现工程建设目标的关键是规范工程管理、做好过程控制.本文结合中州分公司的工程建设管理实践,对工程目标实现的途径进行了探讨. 相似文献
5.
6.
7.
罗艳 《有色冶金设计与研究》2010,31(2):14-16
阐述了深冷制氧技术原理、制氧流程及技术特点,并结合工程实际,介绍了深冷制氧技术在某铜冶炼厂的应用,提出了深冷制氧机组安全运行和噪声防护的措施。 相似文献
8.
9.
作者通过攀钢10000m^3/h制氧机工程噪声评价的实践,就采用类比法解决该工程噪声对环境的影响进行了详尽论述,并对类比法的基本概念和工程环境影响评估中采用类比法进行品噪声评价时应注意的五个基本观点作了说明。 相似文献
10.
介绍了三明钢铁公司10000m^3/h制氧机的特点、配套情况、性能考核结果以及在工程建设中遇到的一些问题及其解决方法。 相似文献
11.
建设工程过程控制是质量管理及其保证的重要手段。通过分析建设工程中存在的问题及影响工程质量的因素,提出加强管理及工程过程控制的措施,来保证工程质量。 相似文献
12.
Bonnie S. Ledbetter 《Canadian Metallurgical Quarterly》1985,111(1):41-51
In the 1930's, a small number of educators and contractors began to advocate that colleges and universities develop programs in construction engineering. Through the Great Depression and World War II, they debated what the nature of construction engineering education ought to be. Following World War II, the climate among educators and contractors was receptive to the ideas which the pioneers in construction engineering education had been advocating for 15 yr. Colleges and universities began to offer construction engineering options in their civil engineering curricula. 相似文献
13.
Osama Abudayyeh Jeffrey Russell David Johnston James Rowings 《Canadian Metallurgical Quarterly》2000,126(3):169-175
Construction education is not new. It was a part of the practical aspects of many early civil engineering degree programs. As early as the 1920's, specializations in construction engineering were found in a few civil engineering programs, paralleling structural engineering and other areas. However, the gradual need for more specialization than could normally be integrated in the civil engineering degree eventually led to the formation of some construction specialty degree undergraduate programs, particularly after World War II. This paper documents the historical evolution of construction education, promotes construction as a stand-alone professional engineering discipline, provides information for schools that are interested in starting an undergraduate construction engineering and management (CEM) degree program, and discusses the engineering accreditation aspects of the CEM curriculum and the role of the construction industry in the CEM curriculum development. 相似文献
14.
Gregory P. Luth 《Canadian Metallurgical Quarterly》2011,137(10):906-915
In this paper, we provide a brief overview of the historical underpinnings of the design-construction industry and the development of design engineering and construction engineering as independent but related subdisciplines of civil engineering. The effects of the first and second generation of computer tools on design engineering are identified. The complementary and evolving definitions of construction engineering and design engineering are examined, specifically in the context of structural design engineering activities and deliverables and the corresponding construction engineering activities and deliverables. The concept of an “engineering continuum” is introduced, and the process is recast in light of that concept. Several case studies are used to examine the promise of third generation design-construction computing technologies such as virtual design and construction and their potential beneficial impact on the cost and schedule of the typical design-construction project. Refinements to the definitions of construction and design engineering that have the potential to maximize the benefits of third generation technology are proposed with an eye toward the form of fourth generation computing technologies that are on the horizon. 相似文献
15.
The National Science Foundation and the Construction Research Council of the American Society of Civil Engineers sponsored a workshop for leading academic researchers to discuss basic research needs in the construction industry. The workshop, held at The University of Michigan, dealt with issues within five primary categories: (1) Definition of basic research in construction engineering and management; (2) basic research needs in construction engineering management; (3) construction engineering analysis and design; (4) construction engineering uncertainty; and (5) construction engineering human resource management. The participants identified a list of items of a basic nature that require research to develop the theoretical underpinnings of construction practice. A summary of the list of research needs is reported in the paper. 相似文献
16.
The needs of the construction industry require that an appropriate balance be provided between construction engineering topics and management topics in both education and research. Because construction is less mature as a research area compared to other areas in civil engineering, limitations on research funding have made the investigation of construction management topics more feasible in comparison to construction engineering topics. Because faculty members are drawn from the pool of Ph.D. students who have primarily researched management topics, there has been a tendency for them to continue emphasis on management topics in both education and research. Other civil engineering disciplines form their research programs around the needs of design codes and standards’ development, and academic participation is high. Similar efforts exist within construction engineering; however, there is less academic participation. It is suggested that greater effort be invested in the improvement of construction process standards and specifications so that construction engineering research efforts can advance construction process standards and stimulate increased engineering educational exposure. It is also suggested that academics who are interested in construction engineering research should consider participating in the specification improvement processes that occur at the national and state levels. A process for wider participation in construction engineering research and standards development is recommended. 相似文献
17.
在目前工程建设施工监理行业中,测量监理是一项非常重要而又必不可少的工作。为了提高施工质量,规范建筑工栏的作业标准,急需制定一个符合工程施工实际并切实可行的测量监理工作规程。简要介绍了整个工程施工过程中的测量监理步骤,同时,还论述了测量监理的主要职责及其施工测量监理的方法及注意事项。工程施工测量的主要任务是采用专用测量器具,通过一定的技术方法把设计图纸的位置、数据、几何形状真实的放样到实地。其测量放样的成果直接影响着工程建设项目的质量等级、结构、安全及建成后的功能。因此,测量监理是工程建设项目监理工作中最关注也是最重要的工作之一。 相似文献
18.
Those working within the domain of construction engineering—the planning and management of the construction of infrastructure assets—today employ a wide range of information technology tools. The vast majority of these tools are used on desktop computers processing tabular information associated with scheduling, tracking, updating statuses, reporting, and similar tasks. In spite of the significant penetration of information technology into construction engineering, there is little direct reuse of the engineering information created during the design phase. Likewise, access to rich engineering information and applications to exploit this information have yet to be extended to mobile workers on the construction jobsite in any significant way. This paper explores a sampling of some of the emerging information technology tools that may be effectively applied to support construction engineering in the field. 相似文献
19.
水文工程建设必须采取合适工程防渗施工技术,才能更好的适应当下的发展需求。基于此,文章主要对水文工程常见地质问题进行了详细分析,进而对水文工程防渗施工技术与防渗施工措施进行相关探讨,以期能够为提升水文工程的建设质量提供有效参考。 相似文献
20.
文章以湖南有色金属研究院产学研基地为例,在详述总体规划、前期建设和施工招标的基础上.论述了基地建设项目工程管理的内涵,指出工程管理通过组织、技术、经济等管理措施得以实现。 相似文献