A 183 GHz f/sub T/ and 165 GHz f/sub max/ regrown-emitter DHBT with abrupt InP emitter

Small-area regrown emitter-base junction InP/In-GaAs/InP double heterojunction bipolar transistors (DHBT) using an abrupt InP emitter are presented for the first time. In a device with emitter-base junction area of 0.7 /spl times/ 8 /spl mu/m/sup 2/, a maximum 183 GHz f/sub T/ and 165 GHz f/sub max/ are exhibited. To our knowledge, this is the highest reported bandwidth for a III-V bipolar transistor utilizing emitter regrowth. The emitter current density is 6/spl times/10/sup 5/ A/cm/sup 2/ at V/sub CE,sat/ = 1.5 V. The small-signal current gain h/sub 21/ = 17, while collector breakdown voltage is near 6 V for the 1500-/spl Aring/-thick collector. The emitter structure, created by nonselective molecular beam epitaxy regrowth, combines a small-area emitter-base junction and a larger-area extrinsic emitter contact, and is similar in structure to that of a SiGe HBT. The higher f/sub T/ and f/sub max/ compared to previously reported devices are achieved by simplified regrowth using an InP emitter and by improvements to the regrowth surface preparation process.     

Ultra high-speed InP-InGaAs SHBTs with f/sub max/ of 478 GHz

InP-based single heterojunction bipolar transistors (SHBTs) for high-speed circuit applications were developed. Typical common emitter DC current gain (/spl beta/) and BV/sub CEO/ were about 17 and 10 V, respectively. Maximum extrapolated f/sub max/ of 478 GHz with f/sub T/ of 154 GHz was achieved for 0.5 /spl times/ 10 /spl mu/m/sup 2/ emitter size devices at 300 kA/cm/sup 2/ collector current density and 1.5 V collector bias. This is the highest f/sub max/ ever reported for any nontransferred substrate HBTs, as far as the authors know. This paper highlights the optimized conventional process, and the authors have great hopes for the process that offers inherent advantages for the direct implementation to high-speed electronic circuit fabrication.     

A 160-GHz f/sub T/ and 140-GHz f/sub MAX/ submicrometer InP DHBT in MBE regrown-emitter technology

We report a 0.7/spl times/8 /spl mu/m/sup 2/ InAlAs-InGaAs-InP double heterojunction bipolar transistor, fabricated in a molecular-beam epitaxy (MBE) regrown-emitter technology, exhibiting 160 GHz f/sub T/ and 140 GHz f/sub MAX/. These initial results are the first known RF results for a nonselective regrown-emitter heterojunction bipolar transistor, and the fastest ever reported using a regrown base-emitter heterojunction. The maximum current density is J/sub E/=8/spl times/10/sup 5/ A/cm/sup 2/ and the collector breakdown voltage V/sub CEO/ is 6 V for a 1500-/spl Aring/ collector. In this technology, the dimension of base-emitter junction has been scaled to an area as low as 0.3/spl times/4 /spl mu/m/sup 2/ while a larger-area extrinsic emitter maintains lower emitter access resistance. Furthermore, the application of a refractory metal (Ti-W) base contact beneath the extrinsic emitter regrowth achieves a fully self-aligned device topology.     

A novel InGaP/Al/sub x/Ga/sub 1-x/As/GaAs CEHBT

A new and interesting InGaP/Al/sub x/Ga/sub 1-x/As/GaAs composite-emitter heterojunction bipolar transistor (CEHBT) is fabricated and studied. Based on the insertion of a compositionally linear graded Al/sub x/Ga/sub 1-x/As layer, a near-continuous conduction band structure between the InGaP emitter and the GaAs base is developed. Simulation results reveal that a potential spike at the emitter/base heterointerface is completely eliminated. Experimental results show that the CEHBT exhibits good dc performances with dc current gain of 280 and greater than unity at collector current densities of J/sub C/=21kA/cm/sup 2/ and 2.70/spl times/10/sup -5/ A/cm/sup 2/, respectively. A small collector/emitter offset voltage /spl Delta/V/sub CE/ of 80 meV is also obtained. The studied CEHBT exhibits transistor action under an extremely low collector current density (2.7/spl times/10/sup -5/ A/cm/sup 2/) and useful current gains over nine decades of magnitude of collector current density. In microwave characteristics, the unity current gain cutoff frequency f/sub T/=43.2GHz and the maximum oscillation frequency f/sub max/=35.1GHz are achieved for a 3/spl times/20 /spl mu/m/sup 2/ device. Consequently, the studied device shows promise for low supply voltage and low-power circuit applications.     

InGaAs/InP DHBTs with 120-nm collector having simultaneously high f/sub /spl tau//, f/sub max//spl ges/450 GHz

InP/In/sub 0.53/Ga/sub 0.47/As/InP double heterojunction bipolar transistors (DHBT) have been designed for increased bandwidth digital and analog circuits, and fabricated using a conventional mesa structure. These devices exhibit a maximum 450 GHz f/sub /spl tau// and 490 GHz f/sub max/, which is the highest simultaneous f/sub /spl tau// and f/sub max/ for any HBT. The devices have been scaled vertically for reduced electron collector transit time and aggressively scaled laterally to minimize the base-collector capacitance associated with thinner collectors. The dc current gain /spl beta/ is /spl ap/ 40 and V/sub BR,CEO/=3.9 V. The devices operate up to 25 mW//spl mu/m/sup 2/ dissipation (failing at J/sub e/=10 mA//spl mu/m/sup 2/, V/sub ce/=2.5 V, /spl Delta/T/sub failure/=301 K) and there is no evidence of current blocking up to J/sub e//spl ges/12 mA//spl mu/m/sup 2/ at V/sub ce/=2.0 V from the base-collector grade. The devices reported here employ a 30-nm highly doped InGaAs base, and a 120-nm collector containing an InGaAs/InAlAs superlattice grade at the base-collector junction.     

InGaAs-InP mesa DHBTs with simultaneously high f/sub /spl tau// and f/sub max/ and low C/sub cb//I/sub c/ ratio

We report an InP-InGaAs-InP double heterojunction bipolar transistor (DHBT), fabricated using a conventional triple mesa structure, exhibiting a 370-GHz f/sub /spl tau// and 459-GHz f/sub max/, which is to our knowledge the highest f/sub /spl tau// reported for a mesa InP DHBT-as well as the highest simultaneous f/sub /spl tau// and f/sub max/ for any mesa HBT. The collector semiconductor was undercut to reduce the base-collector capacitance, producing a C/sub cb//I/sub c/ ratio of 0.28 ps/V at V/sub cb/=0.5 V. The V/sub BR,CEO/ is 5.6 V and the devices fail thermally only at >18 mW//spl mu/m/sup 2/, allowing dc bias from J/sub e/=4.8 mA//spl mu/m/sup 2/ at V/sub ce/=3.9 V to J/sub e/=12.5 mA//spl mu/m/sup 2/ at V/sub ce/=1.5 V. The device employs a 30 nm carbon-doped InGaAs base with graded base doping, and an InGaAs-InAlAs superlattice grade in the base-collector junction that contributes to a total depleted collector thickness of 150 nm.     

10-GHz power performance of a type II InP/GaAsSb DHBT

Type-II InP/GaAsSb double heterojunction bipolar transistors (DHBTs) were fabricated and microwave power performance was measured. For an InP collector thickness of 150 nm, the DHBTs show a current gain of 24, low offset voltages, and a BV/sub CEO/>6V. The 1.2/spl times/16 /spl mu/m/sup 2/ devices show f/sub T/=205GHz and f/sub MAX/=106GHz at J/sub C/=304 kA/cm/sup 2/. These devices delivered 12.6 dBm to the load at P/sub AVS/=3.3 dBm operating at 10 GHz, yielding a power-added efficiency of 41% and G/sub T/=9.3 dB.     

Graded base type-II InP/GaAsSb DHBT with f/sub T/=475 GHz

The first demonstration of a type-II InP/GaAsSb double heterojunction bipolar transistor (DHBT) with a compositionally graded InGaAsSb to GaAsSb base layer is presented. A device with a 0.4/spl times/6 /spl mu/m/sup 2/ emitter dimensions achieves peak f/sub T/ of 475 GHz (f/sub MAX/=265 GHz) with current density at peak f/sub T/ exceeding 12 mA//spl mu/m/sup 2/. The structure consists of a 25-nm InGaAsSb/GaAsSb graded base layer and 65-nm InP collector grown by MBE with breakdown voltage /spl sim/4 V which demonstrates the vertical scaling versus breakdown advantage over type-I DHBTs.     

Submicron InP-InGaAs single heterojunction bipolar transistors with f/sub T/ of 377 GHz

Submicron InP-InGaAs-based single heterojunction bipolar transistors (SHBTs) are fabricated to achieve record-breaking speed performance using an aggressively scaled epitaxial structure coupled with a submicron emitter process. SHBTs with dimensions of 0.35 /spl times/16 /spl mu/m have demonstrated a maximum current gain cutoff frequency f/sub T/ of 377 GHz with a simultaneous maximum power gain cutoff frequency f/sub MAX/ of 230 GHz at the current density Jc of 650 kA/cm/sup 2/. Typical BV/sub CEO/ values exceed 3.7 V.     

GaInP/GaAs collector-up tunneling-collector heterojunction bipolar transistors (C-up TC-HBTs): optimization of fabrication process and epitaxial layer structure for high-efficiency high-power amplifiers

This paper describes a novel heterojunction bipolar transistor (HBT) structure, the collector-up tunneling-collector HBT (C-up TC-HBT), that minimizes the offset voltage V/sub CE,sat/ and the knee voltage V/sub k/. In this device, a thin GaInP layer is used as a tunnel barrier at the base-collector (BC) junction to suppress hole injection into the collector, which results in small V/sub CE,sat/. Collector-up configuration is used because of the observed asymmetry of the band discontinuity between GaInP and GaAs depending on growth direction. To minimize V/sub k/, we optimized the epitaxial layer structure as well as the conditions of ion implantation into the extrinsic emitter and post-implantation annealing. The best results were obtained when a 5-nm-thick 5/spl times/10/sup 17/-cm/sup -3/-doped GaInP tunnel barrier with a 20-nm-thick undoped GaAs spacer was used at the BC junction, and when 2/spl times/10/sup 12/-cm/sup -2/ 50-keV B implantation was employed followed by 10-min annealing at 390/spl deg/C. Fabricated 40/spl times/40-/spl mu/m/sup 2/ C-up TC-HBTs showed almost zero V/sub CE,sat/ (<10 mV) and a very small V/sub k/ of 0.29 V at a collector current density of 4 kA/cm/sub 2/, which are much lower than those of a typical GaInP/GaAs HBT. The results indicate that the C-up TC-HBT's are attractive candidates for high-efficiency high power amplifiers.     

High-f/sub max/ AlGaAs/InGaAs and AlGaAs/GaAs HBT's with p/sup +//p regrown base contacts

The present paper describes a new approach to fabricating high performance HBT's with low base resistance. Their base contact resistance is reduced by using MOMBE selective growth in the extrinsic base region-a key process in the fabrication of high-f/sub max/ AlGaAs/InGaAs and AlGaAs/GaAs HBT's. A p/sup +//p regrown base structure, which consists of a 40-nm-thick graded InGaAs strained layer and a heavily C-doped regrown contact layer, is used for the AlGaAs/InGaAs HBT's to reduce both their base transit time and base resistance, while preventing aluminum oxide incorporation at the regrowth interface. An h/sub fe/ of 93, an f/sub T/ of 102 GHz, and an f/sub max/ of 224 GHz are achieved for a 1.6-/spl mu/m/spl times/4.6-/spl mu/m HBT, together with reduced base push-out effects and improved reliability. AlGaAs/GaAs HBT's with an 80-nm-thick uniform base layer that have high f/sub max/ values ranging from 140-216 GHz are also fabricated using the selective growth technique. These results confirm the high potential of the proposed HBT's, especially for microwave and millimeter-wave applications.<>     

Microwave performance of pseudomorphic resonant-tunnelling hot electron transistors at 77 K

Describes the first 77 K microwave measurements for resonant-tunnelling hot electron transistors (RHETs) fabricated using GaInAs/AlInAs pseudomorphic heterostructures. A collector current peak-to-valley ratio of 10 is obtained with a peak collector current density of 2*10/sup 5/ A/cm/sup 2/. A current gain cut-off frequency f/sub T/ of 63 GHz and a maximum oscillation frequency f/sub max/ of 44 GHz are measured at 77 K with an emitter current density of 1.1*10/sup 5/ A/cm/sup 2/.<>     

InGaAs/InP composite collector heterostructure bipolar transistors

A high speed bipolar transistor with high breakdown voltage BV/sub CEO/ is described. The structure uses a composite collector of InGaAs and InP. A common emitter gain of 65 is obtained with a base doping of 7*10/sup 19/ cm/sup -3/ and a breakdown voltage in excess of 10 V. The f/sub T/=64 GHz was reached at a collector-emitter voltage of 2 V and a current density of 52 kA/cm/sup 2/. The potential of this structure for very high speed applications is demonstrated by the extracted intrinsic transit time of 0.4 ps.<>     

A submicrometer 252 GHz f/sub T/ and 283 GHz f/sub MAX/ InP DHBT with reduced C/sub BC/ using selectively implanted buried subcollector (SIBS)

The selectively implanted buried subcollector (SIBS) is a method to decouple the intrinsic and extrinsic C/sub BC/ of InP-based double-heterojunction bipolar transistors (DHBTs). Similar to the selectively implanted collector (SIC) used in Si-based bipolar junction transistors (BJTs) and HBTs, ion implantation is used to create a N+ region in the collector directly under the emitter. By moving the subcollector boundary closer to the BC junction, SIBS allows the intrinsic collector to be thin, reducing /spl tau//sub C/, while simultaneously allowing the extrinsic collector to be thick, reducing C/sub BC/. For a 0.35 /spl times/ 6 /spl mu/m/sup 2/ emitter InP-based DHBT with a SIBS, 6 fF total C/sub BC/ and >6 V BV/sub CBO/ were obtained with a 110-nm intrinsic collector thickness. A maximum f/sub T/ of 252 GHz and f/sub MAX/ of 283 GHz were obtained at a V/sub CE/ of 1.6 V and I/sub C/ of 7.52 mA. Despite ion implantation and materials regrowth during device fabrication, a base and collector current ideality factor of /spl sim/2.0 and /spl sim/1.4, respectively, at an I/sub C/ of 100 /spl mu/A, and a peak dc /spl beta/ of 36 were measured.     

InGaAs-InP DHBTs for increased digital IC bandwidth having a 391-GHz f/sub /spl tau// and 505-GHz f/sub max/

InP-In/sub 0.53/Ga/sub 0.47/As-InP double heterojunction bipolar transistors (DHBT) have been designed for use in high bandwidth digital and analog circuits, and fabricated using a conventional mesa structure. These devices exhibit a maximum 391-GHz f/sub /spl tau// and 505-GHz f/sub max/, which is the highest f/sub /spl tau// reported for an InP DHBT-as well as the highest simultaneous f/sub /spl tau// and f/sub max/ for any mesa HBT. The devices have been aggressively scaled laterally for reduced base-collector capacitance C/sub cb/. In addition, the base sheet resistance /spl rho//sub s/ along with the base and emitter contact resistivities /spl rho//sub c/ have been lowered. The dc current gain /spl beta/ is /spl ap/36 and V/sub BR,CEO/=5.1 V. The devices reported here employ a 30-nm highly doped InGaAs base, and a 150-nm collector containing an InGaAs-InAlAs superlattice grade at the base-collector junction. From this device design we also report a 142-GHz static frequency divider (a digital figure of merit for a device technology) fabricated on the same wafer. The divider operation is fully static, operating from f/sub clk/=3 to 142.0 GHz while dissipating /spl ap/800 mW of power in the circuit core. The circuit employs single-buffered emitter coupled logic (ECL) and inductive peaking. A microstrip wiring environment is employed for high interconnect density, and to minimize loss and impedance mismatch at frequencies >100 GHz.     

Vertical scaling of 0.25-/spl mu/m emitter InP/InGaAs single heterojunction bipolar transistors with f/sub T/ of 452 GHz

Vertical scaling of the epitaxial structure has allowed submicron InP/InGaAs-based single heterojunction bipolar transistors (SHBTs) to achieve record high-frequency performance. The 0.25/spl times/16 /spl mu/m/sup 2/ transistors, featuring a 25-nm base and a 100-nm collector, display current gain cut-off frequencies f/sub T/ of 452 GHz. The devices operate at current densities above 1000 kA/cm/sup 2/ and have BV/sub CEO/ breakdowns of 2.1 V. A detailed analysis of device radio frequency (RF) parameters, and delay components with respect to scaling of the collector thickness is presented.     

Laterally scaled Si-Si/sub 0.7/Ge/sub 0.3/ n-MODFETs with f/sub max/>200 GHz and low operating bias

We report on the dc and RF characterization of laterally scaled, Si-SiGe n-MODFETs. Devices with gate length, L/sub g/, of 80 nm had f/sub T/=79 GHz and f/sub max/=212 GHz, while devices with L/sub g/=70 nm had f/sub T/ as high as 92 GHz. The MODFETs displayed enhanced f/sub T/ at reduced drain-to-source voltage, V/sub ds/, compared to Si MOSFETs with similar f/sub T/ at high V/sub ds/.     

4-bit multiplexer/demultiplexer chip set for 40-Gbit/s optical communication systems

We have designed and fabricated a low-power 4:1 multiplexer (MUX), 1:4 demultiplexer (DEMUX) and full-clock-rate 1:4 DEMUX with a clock and data recovery (CDR) circuit using undoped-emitter InP-InGaAs HBTs. Our HBTs exhibit an f/sub T/ of approximately 150 GHz and an f/sub max/ of approximately 200 GHz at a collector current density of 50 kA/spl mu/m/sup 2/. In the circuit design, we utilize emitter-coupled logic and current-mode logic series gate flip-flops and optimized the collector current density of each transistor to achieve low-power operation at required high bit rates. Error-free operation at bit rates of up to 50 Gbit/s were confirmed for the 4:1 MUX and 1:4 DEMUX, which dissipates 2.3 and 2.5 W, respectively. In addition, the full-clock-rate 1:4 DEMUX with the CDR achieved 40-Gbit/s error-free operation.     

Wideband DHBTs using a graded carbon-doped InGaAs base

We report an InP/InGaAs/InP double heterojunction bipolar transistor (DHBT), fabricated using a mesa structure, exhibiting 282 GHz f/sub /spl tau// and 400 GHz f/sub max/. The DHBT employs a 30 nm InGaAs base with carbon doping graded from 8/spl middot/10/sup 19//cm/sup 3/ to 5/spl middot/10/sup 19//cm/sup 3/, an InP collector, and an InGaAs/InAlAs base-collector superlattice grade, with a total 217 nm collector depletion layer thickness. The low base sheet (580 /spl Omega/) and contact (<10 /spl Omega/-/spl mu/m/sup 2/) resistivities are in part responsible for the high f/sub max/ observed.     

Si/SiGe n-MODFETs on thin SiGe virtual substrates prepared by means of He implantation

Si/SiGe n-type modulation-doped field-effect transistors grown on a very thin strain-relieved Si/sub 0.69/Ge/sub 0.31/ buffer on top of a Si(100) substrate were fabricated and characterized. This novel type of virtual substrate has been created by means of a high dose He ion implantation localized beneath a 95-nm-thick pseudomorphic SiGe layer on Si followed by a strain relaxing annealing step at 850/spl deg/C. The layers were grown by molecular beam epitaxy. Electron mobilities of 1415 cm/sup 2//Vs and 5270 cm/sup 2//Vs were measured at room temperature and 77 K, respectively, at a sheet carrier density of about 3/spl times/10/sup 12//cm/sup 2/. The fabricated transistors with Pt-Schottky gates showed good dc characteristics with a drain current of 330 mA/mm and a transconductance of 200 mS/mm. Cutoff frequencies of f/sub t/=49 GHz and f/sub max/=95 GHz at 100 nm gate length were obtained which are quite close to the figures of merit of a control sample grown on a conventional, thick Si/sub 0.7/Ge/sub 0.3/ buffer.