Predicting crash risk and identifying crash precursors on Korean expressways using loop detector data

In order to improve traffic safety on expressways, it is important to develop proactive safety management strategies with consideration for segment types and traffic flow states because crash mechanisms have some differences by each condition. The primary objective of this study is to develop real-time crash risk prediction models for different segment types and traffic flow states on expressways. The mainline of expressways is divided into basic segment and ramp vicinity, and the traffic flow states are classified into uncongested and congested conditions. Also, Korean expressways have irregular intervals between loop detector stations. Therefore, we investigated on the effect and application of the detector stations at irregular intervals for the crash risk prediction on expressways. The most significant traffic variables were selected by conditional logistic regression analysis which could control confounding factors. Based on the selected traffic variables, separate models to predict crash risk were developed using genetic programming technique. The model estimation results showed that the traffic flow characteristics leading to crashes are differed by segment type and traffic flow state. Especially, the variables related to the intervals between detector stations had a significant influence on crash risk prediction under the uncongested condition. Finally, compared with the single model for all crashes and the logistic models used in previous studies, the proposed models showed higher prediction performance. The results of this study can be applied to develop more effective proactive safety management strategies for different segment types and traffic flow states on expressways with loop detector stations at irregular intervals.     

Analysis of safety factors for urban expressways considering the effect of congestion in Shanghai,China

Urban expressways are the key components of the urban traffic network. The traffic safety situation on expressways directly influences the efficiency of the whole network. A total of 48,325 crashes were recorded by Shanghai Expressway Surveillance System in a three-year period. Considering the different crash mechanisms under different congestion levels, models for the total crashes, non-congested-flow crashes and congested-flow crashes were respectively formulated based on the real-time traffic condition corresponding to each crash. Moreover, considering the potential spatial correlation among segments, the adjacent-correlated spatial and distance-correlated spatial models were formulated and compared to the traditional non-spatial-correlated model. A Bayesian approach was employed to estimate the parameters. The results showed that the congestion index, merging ratio, ramp density, and average daily traffic significantly affect the crash frequency. The safety factors in non-congested flow and congested flow are different; diverging behavior is more risky in non-congested flow, more lanes tend to increase the risk of crashes in congested flow, and horizontal curves tend to decrease the crash risk in congested flow but cause high risk in non-congested flow. In addition, the distance-correlated spatial model is found to be the best-fitting model. The results of this study suggested that dedicated safety countermeasures can be designed for different traffic situations on urban expressways.     

Impact of traffic oscillations on freeway crash occurrences

Traffic oscillations are typical features of congested traffic flow that are characterized by recurring decelerations followed by accelerations (stop-and-go driving). The negative environmental impacts of these oscillations are widely accepted, but their impact on traffic safety has been debated. This paper describes the impact of freeway traffic oscillations on traffic safety. This study employs a matched case-control design using high-resolution traffic and crash data from a freeway segment. Traffic conditions prior to each crash were taken as cases, while traffic conditions during the same periods on days without crashes were taken as controls. These were also matched by presence of congestion, geometry and weather. A total of 82 cases and about 80,000 candidate controls were extracted from more than three years of data from 2004 to 2007. Conditional logistic regression models were developed based on the case-control samples. To verify consistency in the results, 20 different sets of controls were randomly extracted from the candidate pool for varying control-case ratios. The results reveal that the standard deviation of speed (thus, oscillations) is a significant variable, with an average odds ratio of about 1.08. This implies that the likelihood of a (rear-end) crash increases by about 8% with an additional unit increase in the standard deviation of speed. The average traffic states prior to crashes were less significant than the speed variations in congestion.     

Motor vehicle-bicycle crashes in Beijing: irregular maneuvers, crash patterns, and injury severity

This research presents a comprehensive analysis of motor vehicle–bicycle crashes using 4 years of reported crash data (2004–2007) in Beijing. The interrelationship of irregular maneuvers, crash patterns and bicyclist injury severity are investigated by controlling for a variety of risk factors related to bicyclist demographics, roadway geometric design, road environment, etc.Results show that different irregular maneuvers are correlated with a number of risk factors at different roadway locations such as the bicyclist age and gender, weather and traffic condition. Furthermore, angle collisions are the leading pattern of motor vehicle–bicycle crashes, and different irregular maneuvers may lead to some specific crash patterns such as head-on or rear-end crashes. Orthokinetic scrape is more likely to result in running over bicyclists, which may lead to more severe injury. Moreover, bicyclist injury severity level could be elevated by specific crash patterns and risk factors including head-on and angle collisions, occurrence of running over bicyclists, night without streetlight, roads without median/division, higher speed limit, heavy vehicle involvement and older bicyclists.This study suggests installation of median, division between roadway and bikeway, and improvement of illumination on road segments. Reduced speed limit is also recommended at roadway locations with high bicycle traffic volume. Furthermore, it may be necessary to develop safety campaigns aimed at male, teenage and older bicyclists.     

Propensity scores-potential outcomes framework to incorporate severity probabilities in the Highway Safety Manual crash prediction algorithm

Accurate estimation of the expected number of crashes at different severity levels for entities with and without countermeasures plays a vital role in selecting countermeasures in the framework of the safety management process. The current practice is to use the American Association of State Highway and Transportation Officials’ Highway Safety Manual crash prediction algorithms, which combine safety performance functions and crash modification factors, to estimate the effects of safety countermeasures on different highway and street facility types. Many of these crash prediction algorithms are based solely on crash frequency, or assume that severity outcomes are unchanged when planning for, or implementing, safety countermeasures. Failing to account for the uncertainty associated with crash severity outcomes, and assuming crash severity distributions remain unchanged in safety performance evaluations, limits the utility of the Highway Safety Manual crash prediction algorithms in assessing the effect of safety countermeasures on crash severity. This study demonstrates the application of a propensity scores-potential outcomes framework to estimate the probability distribution for the occurrence of different crash severity levels by accounting for the uncertainties associated with them. The probability of fatal and severe injury crash occurrence at lighted and unlighted intersections is estimated in this paper using data from Minnesota. The results show that the expected probability of occurrence of fatal and severe injury crashes at a lighted intersection was 1 in 35 crashes and the estimated risk ratio indicates that the respective probabilities at an unlighted intersection was 1.14 times higher compared to lighted intersections. The results from the potential outcomes-propensity scores framework are compared to results obtained from traditional binary logit models, without application of propensity scores matching. Traditional binary logit analysis suggests that the probability of occurrence of severe injury crashes is higher at lighted intersections compared to unlighted intersections, which contradicts the findings obtained from the propensity scores-potential outcomes framework. This finding underscores the importance of having comparable treated and untreated entities in traffic safety countermeasure evaluations.     

Crash risk analysis for Shanghai urban expressways: A Bayesian semi-parametric modeling approach

Urban expressway systems have been developed rapidly in recent years in China; it has become one key part of the city roadway networks as carrying large traffic volume and providing high traveling speed. Along with the increase of traffic volume, traffic safety has become a major issue for Chinese urban expressways due to the frequent crash occurrence and the non-recurrent congestions caused by them. For the purpose of unveiling crash occurrence mechanisms and further developing Active Traffic Management (ATM) control strategies to improve traffic safety, this study developed disaggregate crash risk analysis models with loop detector traffic data and historical crash data. Bayesian random effects logistic regression models were utilized as it can account for the unobserved heterogeneity among crashes. However, previous crash risk analysis studies formulated random effects distributions in a parametric approach, which assigned them to follow normal distributions. Due to the limited information known about random effects distributions, subjective parametric setting may be incorrect. In order to construct more flexible and robust random effects to capture the unobserved heterogeneity, Bayesian semi-parametric inference technique was introduced to crash risk analysis in this study. Models with both inference techniques were developed for total crashes; semi-parametric models were proved to provide substantial better model goodness-of-fit, while the two models shared consistent coefficient estimations. Later on, Bayesian semi-parametric random effects logistic regression models were developed for weekday peak hour crashes, weekday non-peak hour crashes, and weekend non-peak hour crashes to investigate different crash occurrence scenarios. Significant factors that affect crash risk have been revealed and crash mechanisms have been concluded.     

Contributory factors to traffic crashes at signalized intersections in Hong Kong

Efficient geometric design and signal timing not only improve operational performance at signalized intersections by expanding capacity and reducing traffic delays, but also result in an appreciable reduction in traffic conflicts, and thus better road safety. Information on the incidence of crashes, traffic flow, geometric design, road environment, and traffic control at 262 signalized intersections in Hong Kong during 2002 and 2003 are incorporated into a crash prediction model. Poisson regression and negative binomial regression are used to quantify the influence of possible contributory factors on the incidence of killed and severe injury (KSI) crashes and slight injury crashes, respectively, while possible interventions by traffic flow are controlled. The results for the incidence of slight injury crashes reveal that the road environment, degree of curvature, and presence of tram stops are significant factors, and that traffic volume has a diminishing effect on the crash risk. The presence of tram stops, number of pedestrian streams, road environment, proportion of commercial vehicles, average lane width, and degree of curvature increase the risk of KSI crashes, but the effect of traffic volume is negligible.     

Comparison of moped,scooter and motorcycle crash risk and crash severity

The increased popularity of mopeds and motor scooters in Australia and elsewhere in the last decade has contributed substantially to the greater use of powered two-wheelers (PTWs) as a whole. As the exposure of mopeds and scooters has increased, so too has the number of reported crashes involving those PTW types, but there is currently little research comparing the safety of mopeds and, particularly, larger scooters with motorcycles. This study compared the crash risk and crash severity of motorcycles, mopeds and larger scooters in Queensland, Australia. Comprehensive data cleansing was undertaken to separate motorcycles, mopeds and larger scooters in police-reported crash data covering the five years to 30 June 2008. The crash rates of motorcycles (including larger scooters) and mopeds in terms of registered vehicles were similar over this period, although the moped crash rate showed a stronger downward trend. However, the crash rates in terms of distance travelled were nearly four times higher for mopeds than for motorcycles (including larger scooters). More comprehensive distance travelled data is needed to confirm these findings. The overall severity of moped and scooter crashes was significantly lower than motorcycle crashes but an ordered probit regression model showed that crash severity outcomes related to differences in crash characteristics and circumstances, rather than differences between PTW types per se. Greater motorcycle crash severity was associated with higher (>80 km/h) speed zones, horizontal curves, weekend, single vehicle and nighttime crashes. Moped crashes were more severe at night and in speed zones of 90 km/h or more. Larger scooter crashes were more severe in 70 km/h zones (than 60 km/h zones) but not in higher speed zones, and less severe on weekends than on weekdays. The findings can be used to inform potential crash and injury countermeasures tailored to users of different PTW types.     

Development of crash-severity-index models for the measurement of work zone risk levels

Highway work zones interrupt regular traffic flows and create safety problems. Improving safety without sacrificing the main function of highways is a challenging task that traffic engineers and researchers have to confront. In this study, the concept of using crash severity index (CSI) for work zone safety evaluation was proposed and a set of CSI models were developed through the modeling of work zone crash severity outcomes. A CSI is a numerical value between zero and one that is estimated from given work zone variables. It is interpreted as the likelihood of having fatality/fatalities when a severe crash occurs in a given work zone. The CSI models were developed using a three-step approach. First, a wide range of crash variables were examined in a comprehensive manner and the significant risk factors that had impact on crash severity were selected. Second, the CSI models were developed using logistic regression technique by incorporating the selected risk factors. Finally, the developed models were validated using the recent crash data and their ability in assessing work zone risk levels were analyzed. Results of this study showed that CSI models can provide straightforward measurements of work zone risk levels.     

The roles of exposure and speed in road safety analysis

Speed is a determining factor in road safety analysis. It is generally believed that an increase in speed harms road safety. However, it can also be argued that driving at high speed reduces the length of time exposure and thus the likelihood of a crash. It is therefore critical to clarify the roles that exposure and speed play in road safety analysis. This study evaluates the relationship between speed and crash risk with respect to distance and time exposure, using disaggregated crash and speed data collected from 112 road segments in Hong Kong. A joint probability model based on a full Bayesian method is applied simultaneously to model crash occurrence and crash severity. In addition, we consider the explanatory variables, including road design, weather conditions, and temporal distribution, in the proposed crash prediction model. The results indicate that average speed plays a significant role in crash risk, despite opposing correlations with respect to distance and time exposure; the correlation between speed and crash risk is positive when distance exposure is considered, but negative when time exposure is used. However, in both cases, speed is positively associated with the injury severity.     

Comprehensive analysis of vehicle-pedestrian crashes at intersections in Florida

This study analyzes vehicle-pedestrian crashes at intersections in Florida over 4 years, 1999-2002. The study identifies the group of drivers and pedestrians, and traffic and environmental characteristics that are correlated with high pedestrian crashes using log-linear models. The study also estimates the likelihood of pedestrian injury severity when pedestrians are involved in crashes using an ordered probit model. To better reflect pedestrian crash risk, a logical measure of exposure is developed using the information on individual walking trips in the household travel survey. Lastly, the impact of average traffic volume on pedestrian crashes is examined. As a result of the analysis, it was found that pedestrian and driver demographic factors, and road geometric, traffic and environment conditions are closely related to the frequency and injury severity of pedestrian crashes. Higher average traffic volume at intersections increases the number of pedestrian crashes; however, the rate of increase is steeper at lower values of average traffic volume. Based on the findings in the analysis, some countermeasures are recommended to improve pedestrian safety.     

Analysis of crash severities using nested logit model—Accounting for the underreporting of crashes

Recent studies in the area of highway safety have demonstrated the usefulness of logit models for modeling crash injury severities. Use of these models enables one to identify and quantify the effects of factors that contribute to certain levels of severity. Most often, these models are estimated assuming equal probability of the occurrence for each injury severity level in the data. However, traffic crash data are generally characterized by underreporting, especially when crashes result in lower injury severity. Thus, the sample used for an analysis is often outcome-based, which can result in a biased estimation of model parameters. This is more of a problem when a nested logit model specification is used instead of a multinomial logit model and when true shares of the outcomes-injury severity levels in the population are not known (which is almost always the case). This study demonstrates an application of a recently proposed weighted conditional maximum likelihood estimator in tackling the problem of underreporting of crashes when using a nested logit model for crash severity analyses.     

Bootstrap resampling approach to disaggregate analysis of road crashes in Hong Kong

Road safety affects health and development worldwide; thus, it is essential to examine the factors that influence crashes and injuries. As the relationships between crashes, crash severity, and possible risk factors can vary depending on the type of collision, we attempt to develop separate prediction models for different crash types (i.e., single- versus multi-vehicle crashes and slight injury versus killed and serious injury crashes). Taking advantage of the availability of crash and traffic data disaggregated by time and space, it is possible to identify the factors that may contribute to crash risks in Hong Kong, including traffic flow, road design, and weather conditions. To remove the effects of excess zeros on prediction performance in a highly disaggregated crash prediction model, a bootstrap resampling method is applied. The results indicate that more accurate and reliable parameter estimates, with reduced standard errors, can be obtained with the use of a bootstrap resampling method. Results revealed that factors including rainfall, geometric design, traffic control, and temporal variations all determined the crash risk and crash severity. This helps to shed light on the development of remedial engineering and traffic management and control measures.     

Safety modeling of suburban arterials in Shanghai,China

As urbanization accelerates in Shanghai, land continues to develop along suburban arterials which results in more access points along the roadways and more congested suburban arterials; all these changes have led to deterioration in traffic safety. In-depth safety analysis is needed to understand the relationship between roadway geometric design, access features, traffic characteristics, and safety. This study examined 161 road segments (each between two adjacent signalized intersections) of eight suburban arterials in Shanghai. Information on signal spacing, geometric design, access features, traffic characteristics, and surrounding area types were collected. The effect of these factors on total crash occurrence was investigated. To account for the hierarchical data structure, hierarchical Bayesian models were developed for total crashes. To identify diverse effects on different crash injury severity, the total crashes were separated into minor injury and severe injury crashes. Bivariate hierarchical Bayesian models were developed for minor injury and severe injury to account for the correlation among different severity levels. The modeling results show that the density of signal spacing along arterials has a significant influence on minor injury, severe injury, and total crash frequencies. The non-uniform signal spacing has a significant impact on the occurrence of minor injury crashes. At the segment-level, higher frequencies of minor injury, severe injury, and total crashes tend to occur for the segments with curves, those with a higher density of access points, those with a higher percentage of heavy vehicles, and those in inner suburban areas. This study is useful for applications such as related engineering safety improvements and making access management policy.     

Exploring the overall and specific crash severity levels at signalized intersections

Many studies have shown that intersections are among the most dangerous locations of a roadway network. Therefore, there is a need to understand the factors that contribute to injuries at such locations. This paper addresses the different factors that affect crash injury severity at signalized intersections. It also looks into the quality and completeness of the crash data and the effect that incomplete data has on the final results. Data from multiple sources have been cross-checked to ensure the completeness of all crashes including minor crashes that are usually unreported or not coded into crash databases. The ordered probit modeling technique has been adopted in this study to account for the fact that injury levels are naturally ordered variables. The tree-based regression methodology has also been adopted in this study to explore the factors that affect each severity level. The probit model results showed that a combination of crash-specific information and intersection characteristics result in the highest prediction rate of injury level. More specifically, having a divided minor roadway or a higher speed limit on the minor roadway decreased the level of injury while crashes involving a pedestrian/bicyclist and left turn crashes had the highest probability of a more severe crash. Several regression tree models showed a difference in the significant factors that affect the different severity types. Completing the data with minor non injury crashes improved the modeling results and depicted differences when modeling the no injury crashes.     

Using hierarchical Bayesian binary probit models to analyze crash injury severity on high speed facilities with real-time traffic data

Severe crashes are causing serious social and economic loss, and because of this, reducing crash injury severity has become one of the key objectives of the high speed facilities’ (freeway and expressway) management. Traditional crash injury severity analysis utilized data mainly from crash reports concerning the crash occurrence information, drivers’ characteristics and roadway geometric related variables. In this study, real-time traffic and weather data were introduced to analyze the crash injury severity. The space mean speeds captured by the Automatic Vehicle Identification (AVI) system on the two roadways were used as explanatory variables in this study; and data from a mountainous freeway (I-70 in Colorado) and an urban expressway (State Road 408 in Orlando) have been used to identify the analysis result's consistence. Binary probit (BP) models were estimated to classify the non-severe (property damage only) crashes and severe (injury and fatality) crashes. Firstly, Bayesian BP models’ results were compared to the results from Maximum Likelihood Estimation BP models and it was concluded that Bayesian inference was superior with more significant variables. Then different levels of hierarchical Bayesian BP models were developed with random effects accounting for the unobserved heterogeneity at segment level and crash individual level, respectively. Modeling results from both studied locations demonstrate that large variations of speed prior to the crash occurrence would increase the likelihood of severe crash occurrence. Moreover, with considering unobserved heterogeneity in the Bayesian BP models, the model goodness-of-fit has improved substantially. Finally, possible future applications of the model results and the hierarchical Bayesian probit models were discussed.     

Evaluation of the impacts of traffic states on crash risks on freeways

The primary objective of this study is to divide freeway traffic flow into different states, and to evaluate the safety performance associated with each state. Using traffic flow data and crash data collected from a northbound segment of the I-880 freeway in the state of California, United States, K-means clustering analysis was conducted to classify traffic flow into five different states. Conditional logistic regression models using case-controlled data were then developed to study the relationship between crash risks and traffic states. Traffic flow characteristics in each traffic state were compared to identify the underlying phenomena that made certain traffic states more hazardous than others. Crash risk models were also developed for different traffic states to identify how traffic flow characteristics such as speed and speed variance affected crash risks in different traffic states. The findings of this study demonstrate that the operations of freeway traffic can be divided into different states using traffic occupancy measured from nearby loop detector stations, and each traffic state can be assigned with a certain safety level. The impacts of traffic flow parameters on crash risks are different across different traffic flow states. A method based on discriminant analysis was further developed to identify traffic states given real-time freeway traffic flow data. Validation results showed that the method was of reasonably high accuracy for identifying freeway traffic states.     

Evaluating the road safety effects of a fuel cost increase measure by means of zonal crash prediction modeling

Travel demand management (TDM) consists of a variety of policy measures that affect the transportation system's effectiveness by changing travel behavior. The primary objective to implement such TDM strategies is not to improve traffic safety, although their impact on traffic safety should not be neglected. The main purpose of this study is to evaluate the traffic safety impact of conducting a fuel-cost increase scenario (i.e. increasing the fuel price by 20%) in Flanders, Belgium. Since TDM strategies are usually conducted at an aggregate level, crash prediction models (CPMs) should also be developed at a geographically aggregated level. Therefore zonal crash prediction models (ZCPMs) are considered to present the association between observed crashes in each zone and a set of predictor variables. To this end, an activity-based transportation model framework is applied to produce exposure metrics which will be used in prediction models. This allows us to conduct a more detailed and reliable assessment while TDM strategies are inherently modeled in the activity-based models unlike traditional models in which the impact of TDM strategies are assumed. The crash data used in this study consist of fatal and injury crashes observed between 2004 and 2007. The network and socio-demographic variables are also collected from other sources. In this study, different ZCPMs are developed to predict the number of injury crashes (NOCs) (disaggregated by different severity levels and crash types) for both the null and the fuel-cost increase scenario. The results show a considerable traffic safety benefit of conducting the fuel-cost increase scenario apart from its impact on the reduction of the total vehicle kilometers traveled (VKT). A 20% increase in fuel price is predicted to reduce the annual VKT by 5.02 billion (11.57% of the total annual VKT in Flanders), which causes the total NOCs to decline by 2.83%.     

Relating crash frequency and severity: Evaluating the effectiveness of shoulder rumble strips on reducing fatal and major injury crashes

To approach the goal of “Toward Zero Deaths,” there is a need to develop an analysis paradigm to better understand the effects of a countermeasure on reducing the number of severe crashes. One of the goals in traffic safety research is to search for an effective treatment to reduce fatal and major injury crashes, referred to as severe crashes. To achieve this goal, the selection of promising countermeasures is of utmost importance, and relies on the effectiveness of candidate countermeasures in reducing severe crashes. Although it is important to precisely evaluate the effectiveness of candidate countermeasures in reducing the number of severe crashes at a site, the current state-of-the-practice often leads to biased estimates. While there have been a few advanced statistical models developed to mitigate the problem in practice, these models are computationally difficult to estimate because severe crashes are dispersed spatially and temporally, and cannot be integrated into the Highway Safety Manual framework, which develops a series of safety performance functions and crash modification factors to predict the number of crashes. Crash severity outcomes are generally integrated into the Highway Safety Manual using deterministic distributions rather than statistical models. Accounting for the variability in crash severity as a function geometric design, traffic flow, and other roadway and roadside features is afforded by estimating statistical models. Therefore, there is a need to develop a new analysis paradigm to resolve the limitations in the current Highway Safety Manual methods. We propose an approach which decomposes the severe crash frequency into a function of the change in the total number of crashes and the probability of a crash becoming a severe crash before and after a countermeasure is implemented. We tested this approach by evaluating the effectiveness of shoulder rumble strips on reducing the number of severe crashes. A total of 310 segments that have had shoulder rumble strips installed during 2002–2009 are included in the analysis. It was found that shoulder rumble strips reduce the total number of crashes, but have no statistically significant effect on reducing the probability of a severe crash outcome.     

Safety impacts of signal-warning flashers and speed control at high-speed signalized intersections

For many years, to reduce the crash frequency and severity at high-speed signalized intersections, warning flashers have been used to alert drivers of potential traffic-signal changes. Recently, more aggressive countermeasures at such intersections include a speed-limit reduction in addition to warning flashers. While such speed-control strategies have the potential to further improve the crash-mitigation effectiveness of warning flashers, a rigorous statistical analysis of crash data from such intersections has not been undertaken to date. This paper uses 10-year crash data from 28 intersections in Nebraska (all with intersection approaches having signal-warning flashers; some with no speed-limit reduction, and the others with either 5 mi/h or 10 mi/h reduction in speed limit) to estimate a random parameters negative binomial model of crash frequency and a nested logit model of crash-injury severity. The estimation findings show that, while a wide variety of factors significantly influence the frequency and severity of crashes, the effect of the 5 mi/h speed-limit reduction is ambiguous—decreasing the frequency of crashes on some intersection approaches and increasing it on others, and decreasing some crash-injury severities and increasing others. In contrast, the 10 mi/h reduction in speed limit unambiguously decreased both the frequency and injury-severity of crashes. It is speculated that, in the presence of potentially heterogeneous driver responses to decreased speed limits, the smaller distances covered during reaction time at lower speeds (allowing a higher likelihood of crash avoidance) and the reduced energy of crashes associated with lower speed limits are not necessarily sufficient to unambiguously decrease the frequency and severity of crashes when the speed-limit reduction is just 5 mi/h. However, they are sufficient to unambiguously decrease the frequency and severity of crashes when the speed-limit reduction is 10 mi/h. Based on this research, speed-limit reductions in conjunction with signal-warning flashers appear to be an effective safety countermeasure, but only clearly so if the speed-limit reduction is at least 10 mi/h.