共查询到20条相似文献,搜索用时 109 毫秒
1.
2.
工业雷管轴向飞片速度理论 总被引:2,自引:1,他引:1
文章结合近年来飞片速度研究现状,提出了工业雷管轴向飞片速度新的理论方程。工业雷管爆轰过程简化为一维物理模型,运用“装药参数贡献法”推导的理论公式,其计算与实验值符合较好,所以,在计算工业雷管轴飞片速度时,考虑装药条件是必要的。 相似文献
3.
四、新的起爆方法 1.电磁、微波起爆装置日本油脂公司研制成功了电磁起爆方法,它将天线和起爆药管(或基本药管)中的传爆电磁元件相连接,接收电磁波起爆。微波雷管起爆方法则是向雷管內的天线发射微波,由天线感应的微波电流加热起爆。美国专利公布的使用电磁起爆电雷管的延期爆破起爆药包组件适用于露天矿、地下矿和采石矿中的大直径垂直炮眼。西德专利报导了由起动器发出高频电磁波起爆雷管系统,包括提供高频脉冲信号的起动装置和一个起爆元件,起爆元件由一个起爆电阻和接 相似文献
4.
电子雷管提高了延期精度以及起爆网路设计的灵活性,可实现“生产-运输-储存-使用”全生命周期安全管控,成为民爆行业重点发展方向。本文从产品结构、应用场景、智能化水平、爆破设计理论、拒爆失效机理等方面着手,梳理了电子雷管起爆技术的发展现状,总结了系列化和标准化、智能化、短延时设计、大规模起爆网路等技术发展趋势;结合工程应用实践,凝练了复杂环境下拒爆现象频发、爆破应用研究脱节、产品类型单一、标准体系不健全等电子雷管起爆技术与应用问题。着眼民爆行业发展需求,提出了电子雷管起爆技术的重点研究方向:电子雷管精确延时控制爆破破岩理论,信息技术与电子雷管起爆技术融合,差异化的电子雷管产品体系,电子雷管标准体系。 相似文献
5.
了解雷管的生产工艺,使用S7-200可编程控制器及其组成的RS-485网络对其进行改造,设计了分布式雷管填装流水生产线控制系统。 相似文献
6.
7.
炸药和雷管同载运输车的研究 总被引:1,自引:0,他引:1
文中介绍了炸药,雷管同载运输车及其核心部分夹套式抗爆容器的结构,设计原理,计算方法和主要性能。试验表明:同载运输车能保证炸药,雷管同车运输的安全,从而证明研究的设计是正确的。这种方法也可和于其它抗爆容器或结构物的设计。 相似文献
8.
9.
为研究电子雷管相比于普通塑料导爆管雷管在爆破振动控制方面的优势,在爆破参数以及岩体条件一致的情况下,开展了电子雷管起爆和普通雷管起爆的对比试验研究,结果表明:相同爆心距条件下,电子雷管的峰值质点振动速度比普通雷管的小,电子雷管的爆破振动主频比普通雷管的高,电子雷管爆破振动能量集中分布,主要分布于40~60 Hz和80~200 Hz频带,普通雷管爆破振动能量分布较电子雷管均匀,主要分布于低频频带。电子雷管不仅振动幅值小,且主频及能量占比高的频带均较普通雷管高,对保护建(构)筑物有利。 相似文献
10.
11.
在环境扫描电镜(ESEM)中,采用高灵敏度的pA-表测试系统,测量法拉第杯,以及Cu-Zn合金、单晶Si、单晶Al2O3三种样品的样品电流(ISP)。ISP值反映出由电子流和离子流控制的ESEM样品室内的电荷环境。法拉第杯的ISP反映出入射电子和离子所控制的电荷环境;样品的ISP反映出入射电子、信号电子和离子所控制的电荷环境。由ISP值可确定ESEM在不同操作和环境条件下的离子化效率、离子化饱和程度,以及气体分子的散射作用。 相似文献
12.
13.
根据Li(Ni,Co,Mn)O2晶体中Li+和Ni2+的阳离子混排占位模型进行模拟计算,建立了(I003/I104)1/2、(I101/I012)1/2(、I101/I104)1/2等特征衍射线强度比与混排占位参数x的线性方程式。结合实验测得的X-射线衍射谱和混排占位模型研究了Li(Ni,Co,Mn)O2合成过程中的结构演变过程。 相似文献
14.
To date,it is still a great challenge for highly efficient perovskite devices to realize the high quality perovskite films with high purity,high coverage ratio and good crystallization by two-step scalable solution method.In this study,a series Pb I_2films with tunable micro-architecture of Pb I_2crystals are prepared via solution processable crystal engineering.The perovskite film,prepared by optimized pit spacing in gas pumped Pb I_2film at 1000 Pa,shows the highest film quality,including no residual Pb I_2phase,compact morphology,and improved photoluminescence intensity.A transformation kinetics shows that the pit spacing strongly influences both the mass transfer and the sequential intercalation reaction between CH_3NH_3I and Pb I_2crystals,which ultimately determines the full reaction state of the perovskite film.The perovskite solar cells assembled by the perovskite film show both high power-conversion efficiency and good reproducibility of photovoltaic performance due to the restrained charge recombination arising from the high quality perovskite film. 相似文献
15.
Superconducting tunnel junction (STJ) detectors have excellent energy resolution, high detection efficiency, and high counting rate in the soft X-ray energy range. These properties are suitable for synchrotron radiation facilities. However, in order to achieve a high throughput analysis for dopants with a lower concentration, the pixel number of STJ array detectors should be further increased to enlarge the sensitive area. As a first step, we have fabricated 400-pixel STJ array detectors and checked the operation yield and the uniformity of leakage current ( \(I_{leak}\) ) values. Fabricated STJs showed excellent current-voltage curves having low subgap current. The operation yield of STJs with \(I_{leak}\) values of less than 10 nA was 96 \(\%\) . The average \(I_{leak}\) of 3.6 nA is roughly equivalent to that of the 100-pixel STJ array detector, which is open to users at synchroton radiation beam lines and have 12 eV energy resolution at 400 eV. 相似文献
16.
利用扫描电子显微镜(SEM)、X射线能谱仪(EDS)及X射线波谱仪(WDS)研究了铜及其氧化物的I_(Lα)/I_(Kα)和I_(Lα)/I_(Lβ)谱线强度比的价态效应。结果表明,不同价态铜的I_(Lα)/I_(Kα)和I_(Lα)/I_(Lβ)谱线强度比按一定的规律随价态而变化,即谱线强度比值随价数增加而减少。 相似文献
17.
18.
镁合金阳极氧化及其耐腐蚀性研究 总被引:3,自引:0,他引:3
采用正交试验,开发出一种新型环保型镁合金阳极氧化的电解液配方,此工艺下形成的阳极氧化膜有良好的耐腐蚀性,其自腐蚀电流密度为0.1586μA/cm2,电解液的pH值是影响氧化膜耐腐蚀性的主要因素。采用EDAX、XRD、SEM对阳极氧化膜的成分、结构和形貌进行了研究,分析了氧化膜具有良好耐腐蚀性的原因。氧化膜主要由MgO组成,另外还含有Al和Si的复合氧化物,SEM结果显示氧化膜与基体的结合良好。 相似文献
19.
《IEEE transactions on magnetics》1965,1(4):285-292
In an all-magnetic resistance-type shift register, a PRIME current pulsei_{p}(t) , of amplitude Ip , is applied to Np and Nb turns through the minor and major apertures, respectively. For given operation frequencyf , the ratioR = I_{p}^{max}/I_{p}^{min} , whereI_{p}^{min} < I_{p} < I_{p}^{max} is the PRIME range of bistable operation, is maximized by matchingN_{p}/N_{b} so thatI_{p}^{max} values determined by spurious ZERO buildup and ONE dropout are the same. For a rectangular (or dc)i_{p}(t) , the matchedN_{p}/N_{b} is fixed by the core properties, and Rmaxis limited (e.g., <7). However, ifi_{p}(t) rises gradually, the matchedN_{p}/N_{b} depends also on the rise time Tr ofi_{p}(t) . The lowerf is, with corresponding larger Tr , the smaller is the matchedN_{p}/N_{b} , and the larger is Rmax. Calculation ofR is carried for ramp and half-sinusoidali_{p}(t) waveforms. The latter, for instance, atT = 25deg C yields Rmaxvalues of 14.0 and 22.0 forf of 1.0 and 0.5 kc/s respectively. Such wide PRIME ranges permit reliable register operation in a wide temperature range without resorting to temperature compensation of Ip . Experimental results are in agreement with the calculation. 相似文献