校园一卡通应用系统安全方案

基于Java卡的校园一卡通应用系统对于学校的现代化管理工作具有十分重要的作用.文中介绍了Java卡及校园一卡通应用系统,并从多个角度探讨校园一卡通应用系统的安全机制,提出了一套较为完整的安全方案.该方案分层、分类地对系统进行了保护.既保护了应用系统的本身安全,保证系统的正常运行,又保证了系统中重要数据与信息的安全.为应用系统安全性分析与防护提供了范例.     

校园一卡通系统中Mifare One卡片安全探讨

校园一卡通系统体现了学校信息化建设水平,是数字化校园建设的一个重要应用系统,实现了"一卡在手,走遍校园"。而在系统中承载信息的载体MifareOne卡片的安全设计与安全管理在一卡通系统安全中最基础、最重要。     

校园一卡通系统中Mifare One卡片安全探讨

校园一卡通系统体现了学校信息化建设水平,是数字化校园建设的一个重要应用系统,实现了一卡在手,走遍校园。而在系统中承载信息的载体Mifare One卡片的安全设计与安全管理在一卡通系统安全中最基础、最重要。     

校园一卡通系统网络安全策略研究

校园一卡通系统对于学校的现代化管理工作具有十分重要的作用。文中介绍了校园一卡通应用系统的设计目标和组成,并从多个角度探讨校园一卡通应用系统的安全机制,提出了一套较为完整的系统网络安全策略。该策略分层、分类地对系统进行了保护。既保护了应用系统的本身安全,保证系统的正常运行,又保证了系统中重要数据与信息的安全。为应用系统安全性分析与防护提供了范例。     

基于J2EE架构的Java卡系统

介绍了Java卡的基本概念,列举了Java卡的优点,探讨了Java卡的开发流程.基于Java卡技术和J2EE架构设计开发了一个"校园一卡通"系统,给出了该系统的考勤子系统的详细设计.     

基于校园网一卡通系统解决方案

本文阐述了校园一卡通系统的总体方案设计:卡片及机具设计、校园一卡通系统的应用系统设计、校园一卡通系统的安全设计、校园一卡通系统的数据库设计.详细地描述了IC卡交费充值系统部分功能实现.     

基于共享数据中心的一卡通数据同步的研究

数字校园建设以后,要求对应用数据进行整合。校园一卡通系统作为数字校园的重要组成部分,其数据来源于数字校园的相关应用系统,如何保持一卡通数据与相关应用系统数据的同步是系统建设要解决的重要问题。本文分析了一卡通数据采集模式,提出了基于SOA架构的共享数据中心来实现一卡通数据同步的方案,详细描述了数据同步的实现步骤,结果证明了该方案的有效性。     

数字化校园一卡通的设计和实现

以集美大学诚毅学院校园一卡通系统为例．介绍了一卡通系统的架构、技术成份、用卡模式以及系统的应用范围及情况。简述了校园一卡通工程在为学校提供的基础数据平台、金融平台．实现规范管理，在数字化校园建设中起到的重要作用。并对该系统的安全性进行分析．确保系统运行的稳定、安全。     

多功能IC卡系统设计与系统安全性

西南交大校园卡’９６系统、清华大学校园ＩＣ卡系统是国内高校有代表性的校园ＩＣ卡系统。此类多功能ＩＣ卡系统的设计,特别是系统的安全设计,对企事业单位的（单用途）ＩＣ卡支付系统和实现“一卡通”多功能应用系统的安全设计均有普遍参考价值。     

非接触IC卡读卡器的开发研究

随着高校招生规模的不断扩大,各学校原有的消费和管理模式已不能适应新的发展要求,先进的校园一卡通系统的出现带来了管理工作的革命。论文介绍了校园一卡通的组成和应用,对非接触IC卡、串口通信、多线程等技术进行了研究,提出了使用多线程、串口等技术开发基于PC控制的非接触IC卡读卡器系统作为校园一卡通系统的一个重要子系统,建立非接触IC卡子系统模型,并给出了程序的测试结果。     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。     

基于QTE的蒙古文显示机制研究与实现

蒙古语言是中国蒙古族使用的通用语言,由于蒙古文区别于其他文字的书写方式和其自身变形机制等特点,在很多通用的文字处理引擎中都不被支持。在嵌入式产品开发与应用领域中Linux加QTE已经成为流行方式。该文给出了一种在QTE环境上实现基于标准Unicode的蒙古文点阵显示和变形算法, 并自定义了支持蒙古文的QTE组件,扩展了QTE功能,为在Linux加QTE方式的嵌入式体系结构中处理蒙古文提供了一种解决方法。