Electrochemical and physicochemical properties of cyclic amine-based Brønsted acidic ionic liquids

Several low-cost ionic liquids (ILs) containing pyrrolidinium, piperidinium, or azepanium units as cations, and formate, trifluoroacetate, or hydrogen sulfate groups as anions, are synthesized. The electrochemical and physicochemical properties, such as viscosity, density, conductivity, electrochemical window of the ILs, and the diffusion coefficient of ferrocene in the ILs are studied. All ILs studied here are liquid at room temperature with a high ionic conductivity (up to 30.7 mS cm⁻¹) at room temperature. Hydrogen sulfate-based ILs exhibits a larger electrochemical window (3.98-3.99 V) than formate- and trifluoroacetate-based ILs (3.22-3.29 V). The results of this study can be used to choose the proper combination of cations and anions for the desired applications.     

Electrochemical studies of four organometallic redox couples as possible reference redox systems in 1-ethyl-3-methylimidazolium tetrafluoroborate

The electrochemical behavior of four organometallic redox couples has been studied in the room temperature ionic liquid 1-ethyl-3-methylimidazolium tetrafluoroborate. Diffusion controlled anodic and cathodic peaks were found for the redox couples Fc/Fc⁺ (ferrocene/ferrocenium), Cc/Cc⁺ (cobaltocene/cobaltocenium) on glassy carbon, platinum and gold. Bis(biphenyl)chromium(I) tetraphenylborate (BCr/BCr⁺) yielded a well-behaved diffusion controlled pair of cathodic-anodic peaks only on glassy carbon and gold as working electrodes. The electrode reaction of decamethylferrocene was affected by adsorption of the reduced form on all of the three working electrodes employed by us. The applicability of three of the four redox couples studied as candidates for reference redox systems in this ionic liquid is discussed.     

Diffusion regimes at nanoelectrode ensembles in different ionic liquids

The electrochemical and diffusion behaviour of different redox probes in different ionic liquids is studied at gold nanoelectrode ensembles (NEEs) in comparison with millimetre sized gold (Au-macro) and glassy carbon (GC) disk electrodes. The redox probes are neutral ferrocene (Fc), the ferrocenylmethyltrimetylammonium cation (FA⁺) and the ferrocenylmonocarboxylate anion (FcCOO⁻). The ILs are the dicyanamide, [N(CN)₂] or bis(trifluoromethylsulfonyl)amide), [N(Tf)₂] salts of the following cations: 1-butyl-3-methylimidazolium, [BMIm], 1-butyl-3-methylpyrrolidonium, [BMPy], or tris(n-hexyl)tetradecylphosphonium [P_14,666]. These ILs are characterized by different viscosities, ranging from 32 to 277 cP. The cyclic voltammetric behaviour of the redox probes is reversible and diffusion controlled at GC electrodes. Diffusion coefficients (D) calculated by the Randles-Sevcik equation scales inversely with the IL viscosity, ranging from 2 × 10⁻⁸ to 3 × 10⁻⁷ cm² s⁻¹. Ionic solutes, namely FA⁺ and FcCOO⁻, present slightly lower D values than neutral Fc. At the Au-macro the electrochemical behaviour of the redox probes is diffusion controlled in the ILs containing the [N(Tf)₂] anion, while it involves relevant adsorption processes in the [N(CN)₂] containing electrolyte. For this reason the diffusion at gold NEEs is studied only in the former ILs.The CVs of the redox probes at the NEEs are peak shaped at low scan rate (v), while they are sigmoidally shaped at high v, but with some shift between forward and backward patterns. This is indicative of the occurrence of a total overlap (TO) diffusion condition when v is low which becomes a mixed diffusion layers (MDL) regime, with only a partial overlapping of individual diffusion layers, at high v values. In the most viscous IL, namely [P_14,666] [N(Tf)₂], at v higher than 0.8 V s⁻¹, a plateau current independent on the scan rate is achieved, indicating the tendency to reach the pure radial regime in this IL. The v values at which the transition between TO and MDL is observed scales directly with D and inversely with the IL viscosity. This behaviour is interpreted on the basis of the dependence of individual diffusion layers at each nanoelectrode on redox probe/IL interaction which fits with existing theoretical models very recently developed for nanoelectrode arrays.     

The electrochemical redox processes in methacrylate-based polymer electrolytes II. - Study on microelectrodes

The electrochemical behaviour of ferrocene was studied in different gel polymer electrolytes based on methyl, ethyl and 2-ethoxyethyl methacrylate and compared to the liquid aprotic solution (propylene carbonate). Voltammetric and chronoamperometric measurements on microelectrodes were conducted in order to describe the qualitative as well as quantitative behaviour of ferrocene in different conditions. Heterogeneous electron-transfer rate constants and diffusion coefficients of ferrocene in polymer electrolytes were estimated to be 1.1-7.8 × 10⁻³ cm s⁻¹ and 4-13 × 10⁻⁸ cm² s⁻¹ depending on the electrolyte composition. The influence of the polymer polarity, ferrocene concentration and level of polymer cross-linkage on the kinetics of ferrocene oxidation and its transport was discussed. The electrolytes with poly(2-ethoxyethyl methacrylate) exhibit the highest ionic conductivity (2-4 × 10⁻⁴ S cm⁻¹) as well as diffusion coefficient of ferrocene (1.3 × 10⁻⁷ cm² s⁻¹) in their structure.     

Physical and electrochemical properties of 1-(2-hydroxyethyl)-3-methyl imidazolium and N-(2-hydroxyethyl)-N-methyl morpholinium ionic liquids

Various ionic liquids (ILs) were prepared via metathesis reaction from two kinds of 1-(2-hydroxyethyl)-3-methyl imidazolium ([HEMIm]⁺) and N-(2-hydroxyethyl)-N-methyl morphorinium ([HEMMor]⁺) cations and three kinds of tetrafluoroborate ([BF₄]⁻), bis(trifluoromethanesulfonyl)imide ([TFSI]⁻) and hexafluorophosphate ([PF₆]⁻) anions. All the [HEMIm]⁺ derivatives were in a liquid state at room temperature. In particular, [HEMIm][BF₄] and [HEMIm][TFSI] showed no possible melting point from −150 °C to 200 °C by DSC analysis, and their high thermal stability until 380-400 °C was verified by TGA analysis. Also, their stable electrochemical property (electrochemical window of more than 6.0 V) and high ionic conductivity (0.002-0.004 S cm⁻¹) further confirm that the suggested ILs are potential electrolytes for use in electrochemical devices. Simultaneously, the [HEMMor]⁺ derivatives have practical value in electrolyte applications because of their easy synthesis procedures, cheap morpholinium cation sources and possibilities of high Li⁺ mobility by oxygen group in the morpholinium cation. However, [HEMMor]⁺ derivatives showing high viscosity usually had lower ionic conductivities than [HEMIm]⁺ derivatives.     

Analysis of the chemical diffusion coefficient of lithium ions in Li3V2(PO4)3 cathode material

The chemical diffusion coefficients of lithium ions (DLi⁺) in Li₃V₂(PO₄)₃ between 3.0 and 4.8 V are systematically determined by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic intermittent titration technique (GITT). The DLi⁺ values are found to be dependent on the voltage state of charge and discharge. Based on the results from all the three techniques, the true diffusion coefficients measured in single-phase region are in the range of 10⁻⁹ to 10⁻¹⁰ cm² s⁻¹. Its apparent diffusion coefficients measured in two-phase regions by CV and GITT range from 10⁻¹⁰ to 10⁻¹¹ cm² s⁻¹ and 10⁻⁸ to 10⁻¹³ cm² s⁻¹, respectively, depending on the potentials. By the GITT, the DLi⁺ varies non-linearly in a “W” shape with the charge-discharge voltage, which is ascribed to the strong interactions of Li⁺ with surrounding ions. Finally, the chemical diffusion coefficients of lithium ions measured by CV, EIS and GITT are compared to each other.     

The electrochemical redox processes in PMMA gel electrolytes—behaviour of transition metal complexes

Electrochemical properties of polymer gel electrolytes based on polymethylmethacrylate (PMMA) were studied by cyclic voltammetry and impedance spectroscopy using new solid-state PMMA-Cd-Cd²⁺ reference electrode. The suitable potential window of the PC-PMMA system was estimated from -0.2 to + 1.5 V versus Cd-Cd²⁺. New polymer gels containing ferrocene-ferricinium (Fc-Fc⁺) couple and other transition metal complexes were prepared by the direct polymerisation of methylmethacrylate (MMA) monomer and the solution of metal complex and supporting electrolyte in anhydrous aprotic solvent—propylene carbonate (PC). The half-wave potentials and apparent diffusion coefficients of used complexes and their dependence on the composition of the system (liquid or gel) were estimated. Time dependent electrochemical measurements showed almost three order decrease of the diffusion coefficients of ferrocene (Fc) and ferricinium (Fc⁺) cation from 6 × 10⁻⁵ to 2 × 10⁻⁹ cm² s⁻¹ during the polymerisation from the liquid to the polymer state. The results show that the PC-PMMA gel electrolyte can be described as a system of embedded solvent in the polymer network of PMMA without present monomer.     

Electrochemical studies of ferrocene in a lithium ion conducting organic carbonate electrolyte

We carried out a detailed study of the kinetics of oxidation of ferrocene (Fc) to ferrocenium ion (Fc⁺) in the non-aqueous lithium ion conducting electrolyte composed of a solution of 1 M LiPF₆ in 1:1 EC:EMC solvent mixture. This study using cyclic (CV) and rotating disk electrode (RDE) voltammetry showed that the Fc⁰/Fc⁺ redox couple is reversible in this highly concentrated electrolyte. The ferrocene and ferrocenium ion diffusion coefficients (D) were calculated from these results. In addition, the electron transfer rate constant (k⁰) and the exchange current density for the oxidation of ferrocene were determined. A comparison of the kinetic data obtained from the two electrochemical techniques appears to show that the data from the RDE experiments are more reliable because they are collected under strict mass transport control. A Tafel slope of c.a. 79 mV/decade and a transfer coefficient α of 0.3 obtained from analysis of the RDE data for ferrocene oxidation suggest that the structure of the activated complex is closer to that of the oxidized specie due to strong interactions with the carbonate solvents. The experiments reported here are relevant to the study of redox reagents for the chemical overcharge protection of Li-ion batteries.     

Electrochemical behavior of several iron complexes in hydrophobic room-temperature ionic liquids

The electrochemical behavior of FeCp₂⁺/FeCp₂ (Cp⁻, cyclopentadienyl), FeCl₄⁻/FeCl₄²⁻, FeBr₄⁻/FeBr₄²⁻ and Fe(CN)₆³⁻/Fe(CN)₆⁴⁻ couples was studied in the hydrophobic room-temperature ionic liquids based on bis(trifluoromethylsulfonyl)imide (TFSI⁻) with 1-n-butyl-1-methylpyrrolidinium (BMP⁺) and other quaternary ammonium cations. The cyclic voltammetric data indicated that these complexes were stable in BMPTFSI and that the redox reactions between trivalent and divalent iron species of these complexes are electrochemically reversible. The diffusion coefficients of these complexes were found to be affected mainly by the size of the species. On the other hand, the redox potential of Fe(CN)₆³⁻/Fe(CN)₆⁴⁻ couple depended on organic cations reflecting the difference in the acceptor properties of the organic cations.     

Development of a Ag/Ag micro-reference electrode for electrochemical measurements in ionic liquids

We report on a novel miniaturized Ag/Ag⁺ reference electrode (RE) design suitable for electrochemical measurements in room temperature ionic liquids (RTILs). The electrode is based on capillaries with an outer diameter of 365 μm and contains a 10 mmol/l solution of a silver salt in a RTIL. The silver salt bears the same type of anion as the RTIL. While potential shifts of several hundred millivolts have been observed for common platinum or silver pseudo-reference electrodes, our Ag/Ag⁺ micro electrode provides a stable and reliable reference potential over a period of more than two weeks, if protected from light and stored in a nitrogen atmosphere. Due to the small dimensions of the RE, it can be placed close to the working electrode (WE) and it is well-suited for application in electrochemical micro cells as well as for potential-controlled in situ AFM, STM or electrochemical impedance measurements. The electrode characteristics were determined by voltammetric measurements on ferrocene and cobaltocenium hexafluorophosphate dissolved in a RTIL. The highest expected contamination of the sample with Ag⁺ ions was calculated and found to be below 4 ppm.     

Synthesis and electrochemical properties of redox active polyurethanes with ferrocene units in polyether soft segments

Electrochemical active segmented polyurethane with ferrocene units in polyether soft segments (PU‐S‐Fc) has been originally synthesized and identified by ¹H‐NMR spectra. Electrochemical behaviors of PU‐S‐Fc blending with lithium perchlorates were investigated by cyclic voltammetry. In N,N′‐dimethyl formide solution, PU‐S‐Fc exhibited normal cathodic and anodic peaks of the ferrocene/ferricinium (Fc/Fc⁺) couple. Compared with that of ferrocene molecules blended in ordinary polyurethane (PU‐B‐Fc), redox peaks of ferrocene units in PU‐S‐Fc were found to be broader, which may be ascribed to the weak adsorption of the polyurethane on the electrode surface. The influence of lithium perchlorate concentration on peak potentials indicated that supporting electrolytes played an important role in electrochemical redox of PU‐S‐Fc. In the solid state, PU‐S‐Fc/Li⁺ showed discernible redox peaks at temperatures higher than 60°C, and an exponential increase curve of electrochemical response with an increase of temperature was found. Temperature variations of the solid‐state ionic conductivity for PU‐S‐Fc/Li⁺ can be interpreted by the Arrhenius equation. The similarity between the temperature dependence of ionic conductivity and electrochemical response revealed that transport mechanism of ionic and redox species in the polyurethane matrix was controlled by the mobility of polyether chains. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2674–2680, 1999     

Iodide/triiodide electrochemistry in ionic liquids: Effect of viscosity on mass transport, voltammetry and scanning electrochemical microscopy

The electrochemistry of I⁻/I₃⁻ was studied in ionic liquids using a combination of cyclic voltammetry, chronoamperometry and scanning electrochemical microscopy (SECM). The electrolytes were 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide [C_nC₁Im][Tf₂N], ionic liquids (where n = 2, 4 and 8) and I⁻ was typically added at a concentration of approximately 11 mM. During cyclic voltammetry, two sets of peaks were observed in each ionic liquid due to oxidation and reduction of the I⁻/I₃⁻ redox couple and oxidation/reduction of the I₃⁻/I₂ redox couple. The diffusion coefficients of I⁻ and I₃⁻, as determined using chronoamperometry, increased with increasing temperature and decreased with increasing ionic liquid viscosity. The effect of ionic liquid viscosity on ultramicroelectrode (UME) voltammetry was also determined using the I⁻/I₃⁻ redox couple. Steady-state behaviour was observed at 1.3 μm UMEs at slow voltammetric scan rates and steady-state SECM feedback approach curves were also obtained at a 1.3 μm Pt SECM tips, provided that the tip approach speed was sufficiently low.     

Ionic liquids containing an alkyl sulfate group as potential electrolytes

Various types of ionic liquid (IL) containing an alkyl sulfate group are synthesized and their physical and electrochemical properties are investigated. The temperature dependency of dynamic viscosity and ionic conductivity are measured for these ILs. The low temperature phase behaviour of the ethylsulfate salts is investigated using differential scanning calorimetry. Three ethylsulfate-containing ionic liquids exhibit wide electrochemical windows of about 5.0 V, and one pyrrolidinium-containing ionic liquid shows a conductivity of 3.8 mS cm⁻¹. The various cations of alkylsulfate-containing ionic liquids are shown to greatly influence viscosity, density, and conductivity. Absorbance solvatochromic probe, Nile Red is used to investigate the relative polarity of alkylsulfate base ionic liquids compared with several organic solvents. The electrochemical and thermal stabilities of these ILs make them promising electrolytes for use in electrochemical devices.     

Analysis of ion diffusion and charging in electronically conducting polydicarbazole films by impedance methods

An electrochemical impedance analysis of the doping kinetics of polydicarbazole films is reported. Polymer films of varying thickness were analyzed using an impedance model that considers spatially-restricted diffusion of ionic species. The main bulk parameters for diffusion and charge accumulation during doping were determined from fits. These parameters resulted independent of film thickness after considering the experimental error. The equilibrium (bulk) capacitance C₀ varies in the range of 100-800 F cm⁻³. The chemical diffusion coefficient D varies within the range of 10⁻¹⁰ to 10⁻⁸ cm² s⁻¹ and increases as the steady-state potential reaches the oxidation peak potential.     

Theory for double potential step chronoamperometry for any potential values at spherical electrodes: Simultaneous determination of the diffusion coefficients of the electroactive species

We present a general and explicit analytical solution for double potential step chronoamperometry with any applied potential values (E₁, E₂) corresponding to a reversible charge transfer process at spherical electrode. This solution is essential to analyze double pulse electrochemical techniques such as RPV and DPV. We consider unequal diffusion coefficients, initial presence of both electroactive species and that the reaction product can dissolve in the electrolytic solution or in the electrode.From the analytical equation obtained it is possible to deduce interesting simplified expressions for some particular cases: both species soluble in the electrolytic solution with equal diffusion coefficients, planar electrodes, ultramicroelectrodes when both species are soluble in the electrolytic solution, and double potential step chronoamperometry with limit current potentials (E₁−E^°′→−∞, E₂−E^°′→+∞). In this last case, when reaction product is not initially present it is pointed that planar electrodes and ultramicroelectrodes cannot be used for determining both diffusion coefficients. This interesting practical consequence can be demonstrated by means of the analytical expression deduced here, which represents a notable advantage in front of numerical results.     

Electrochemistry of ionophore-coordinated Cs and Sr ions in the tri-1-butylmethylammonium bis((trifluoromethyl)sulfonyl)imide ionic liquid

The selective extraction of Cs⁺ and Sr²⁺ from aqueous solutions by using the ionophores calix[4]arene-bis(tert-octylbenzo-crown-6) (BOBCalixC6) and dicyclohexano-18-crown-6 (DCH18C6), respectively, was demonstrated in the hydrophobic, room-temperature ionic liquid (RTIL), tri-1-butylmethylammonium bis((trifluoromethyl)sulfonyl)imide (Tf₂N⁻). The electrochemistry of Cs⁺ coordinated by BOBCalixC6 and Sr²⁺ coordinated by DCH18C6 was examined at a mercury film electrode (MFE) in this ionic liquid by using cyclic staircase voltammetry, sampled current voltammetry at a rotating electrode, and chronoamperometry. Both BOBCalixC6·2Cs⁺ and DCH18C6·Sr²⁺ exhibit well-defined reduction waves at approximately −2.4 and −2.9 V versus the ferrocene/ferrocenium (Fc/Fc⁺) couple, respectively, in which the coordinated ions are reduced to their respective amalgams, permitting the recycling of the ionophores. The diffusion coefficients of BOBCalixC6·2Cs⁺ and DCH18C6·Sr²⁺ are (2.7 ± 0.1) × 10⁻⁹ and (2.1 ± 0.1) × 10⁻⁹ cm² s⁻¹, respectively, at 30 °C. The coulometric efficiency for the reduction and stripping of Cs at mercury pool electrodes was about 90% and was independent of the deposition time, whereas the efficiency for Sr was slightly less than 90% at short times and decreased with the deposition time, probably due to the formation of a passive layer of Sr(Tf₂N)₂.     

Temperature dependence of kinetics and diffusion coefficients for ferrocene/ferricenium in ammonium-imide ionic liquids

The electrochemical behavior of ferrocene (Fc) and ferricenium (Fc⁺) was investigated by cyclic voltammetry with convolutional and semi-differential electroanalyses in the temperature range 298-373 K in the hydrophobic room temperature ionic liquid systems consisting of bis(trifluoromethanesulfone)imide anion with quaternary ammonium cation. The experimental results indicated that the redox reaction of Fc/Fc⁺ was reversible in this ionic liquid and the charge-transfer rate constant (k⁰) has been obtained. Mass transport towards the electrode is a simple diffusion process and the diffusion coefficient (D) for Fc/Fc⁺ has been also calculated. These results indicated that the k⁰ and D increased with increasing temperature in ionic liquids. The validity of the Arrhenius law was verified by investigating the temperature dependences of k⁰ and D.     

Electrochemistry of ferrocene in anionic,cationic and nonionic micellar solutions. Effet of the micelle solubilization of the half-wave potentials

The redox properties of the ferrocene/ferricinium Fc/Fc⁺ couple were studied in aqueous 0.1 M NaCl solution of sodium dodecylsulphate (SDS), N-cetyltrimethylammonium bromide (CTAB) and polyoxyethylene-23 lauryl ether (Brij 35). Solubilities of ferrocene were measured by spectrophotometry and by limiting current measurements in direct current voltammetry. The reversible half-wave potentials were determined by cyclic and differential pulse voltammetry. The results are discussed on the basis of the micelle solubilization equilibrium of both the reductant Fc and the oxidant Fc⁺. Indeed, diffusion coefficient ratios of the oxidant to the reductant, measured by coulometry, show that the micelle solubilization of the electrogenerated ferricinium cation Fc⁺ must also be considered in the nonionic and the anionic micellar solutions. Thus in every solution studied, a standard potential of Fc/Fc⁺ in water may be obtained from the experimental values of the half-wave potentials, the partition coefficients of Fc and Fc⁺ and the ratio of their diffusion coefficients. The behaviour of ferrocene in the SDS solutions and the effect produced by the addition of pentanol seem to confirm that SDS forms micelles with a less ordered structure than the other surfactants studied. The invariance of the half-wave potentials of ferrocene in pure SDS solutions whatever the surfactant and ferrocene concentrations suggests the use of this solute-solvent couple as a reference potential system.     

Ternary diffusion coefficients of monoethanolamine and N-methyldiethanolamine in aqueous solutions

Ternary diffusion coefficients of monoethanolamine (MEA) and N-methyldiethanolamine (MDEA) in aqueous solutions have been measured at 303.2, 313.2, and 323.2 K. The systems studied are aqueous solutions containing total amine concentrations of 2.5 and 4.0 kmol/m³ and each solution prepared with four different amine molar ratios. The main diffusion coefficients (D₁₁ and D₂₂) and cross-diffusion coefficients (D₁₂ and D₂₁) and the density and viscosity of the aqueous amine solutions are discussed and analyzed as a function of temperature and their concentration.     

Ionic liquid electrolytes based on multi-methoxyethyl substituted ammoniums and perfluorinated sulfonimides: Preparation, characterization, and properties

New functionalized ionic liquids (ILs), comprised of multi-methoxyethyl substituted quaternary ammonium cations (i.e. [N(CH₂CH₂OCH₃)_4−n(R)_n]⁺; n = 1, R = CH₃OCH₂CH₂; n = 1, R = CH₃, CH₂CH₃; n = 2, R = CH₃CH₂), and two representative perfluorinated sulfonimide anions (i.e. bis(fluorosulfonyl)imide (FSI⁻) and bis(trifluoromethanesulfonyl)imide (TFSI⁻)), were prepared. Their fundamental properties, including phase transition, thermal stability, viscosity, density, specific conductivity and electrochemical window, were extensively characterized. These multi-ether functionalized ionic liquids exhibit good capability of dissolving lithium salts. Their binary electrolytes containing high concentration of the corresponding lithium salt ([Li⁺] >1.6 mol kg⁻¹) show Li⁺ ion transference number (tLi⁺) as high as 0.6-0.7. Their electrochemical stability allows Li deposition/stripping realized at room temperature. The desired properties of these multi-ether functionalized ionic liquids make them potential electrolytes for Li (or Li-ion) batteries.