Selective transfer of cations between two electrolytes using the intercalation properties of Chevrel phases

A device based on an electrochemical transfer junction (constituted by M_xMo₆S₈ or M_xMo₆Se₈) placed between two tanks allows the transfer of cations by application of current density controlled between electrodes placed in tanks. The transfer protocol was tested on different mixed electrolytes containing cations directly engaged in the batteries industry (M²⁺ = Co²⁺, Ni²⁺, Cd²⁺, Zn²⁺, Mn²⁺, Cu²⁺). Good performances of the process are provided until 1.6 mA cm⁻². The electrolysis through an electrochemical transfer junction made of Chevrel phases represents a suitable method for the selective extraction of cations with appreciable selectivity rates with an appropriate choice of the host lattice (sulfide or selenide). Remarkable separations between Co/Ni, Zn/Mn with Mo₆S₈ and Cd/Zn, Cd/Ni, Cd/Co and Zn/Ni, with Mo₆Se₈ were observed.     

Evolution of the local structure and electrochemical properties of spinel LiNixMn2−xO4 (0 ≤ x ≤ 0.5)

A series of Ni substituted spinel LiNi_xMn_2−xO₄ (0 ≤ x ≤ 0.5) have been synthesized to study the evolution of the local structure and their electrochemical properties. X-ray diffraction showed a few Ni cations moved to the 8a sites in heavily substituted LiNi_xMn_2−xO₄ (x ≥ 0.3). X-ray photoelectron spectroscopy confirmed Ni²⁺ cations were partially oxidized to Ni³⁺. The local structures of LiNi_xMn_2−xO₄ were studied by analyzing the and A_1g Raman bands. The most compact [Mn(Ni)O₆] octahedron with the highest bond energy of Mn(Ni)O was found for LiNi_0.2Mn_1.8O₄, which showed a Mn(Ni)O average bond length of 1.790 Å, and a force constant of 2.966 N cm⁻¹. Electrolyte decomposition during the electrochemical charging processes increased with Ni substitution. The discharge capacities at the 4.1 and 4.7 V plateaus obeyed the linear relationships with respect to the Ni substitution with the slopes of −1.9 and +1.9, which were smaller than the theoretical values of −2 and +2, respectively. The smaller slopes could be attributed to the electrochemical hysteresis and the presence of Ni³⁺ in the materials.     

Multifunctionality of Active Centers in (Amm)oxidation Catalysts: From Bi–Mo–O x to Mo–V–Nb–(Te, Sb)–O x

Catalytic centers in selective (allylic) oxidation and ammoxidation catalysts are multimetallic and multifunctional. In the historically important bismuth molybdates, used for propylene (amm)oxidation, they are composed of (Bi³⁺)(Mo⁶⁺)₂ complexes in which the Bi³⁺ site is associated with the -H abstraction and the (Mo⁶⁺)₂ site with the propylene chemisorption and O or NH insertion. An updated reaction mechanism is presented. In the Mo–V–Nb–Te–O _x systems, three crystalline phases (orthorhombic Mo_7.5V_1.5NbTeO₂₉, pseudohexagonal Mo₆Te₂VO₂₀, and monoclinic TeMo₅O₁₆) were identified, with the orthorhombic phase being the most important one for propane (amm)oxidation. Its active centers contain all necessary key catalytic elements (2V⁵⁺/Mo⁶⁺, 1V⁴⁺/Mo⁵⁺, 2Mo⁶⁺/Mo⁵⁺, 2Te⁴⁺) for this reaction wherein a V⁵⁺ surface site (V⁵⁺ = O ⁴⁺V–O) is associated with paraffin activation, a Te⁴⁺ site with -H abstraction once the olefin has formed, and a (Mo⁶⁺)₂ site with the NH insertion. Four Nb⁵⁺ centers, each surrounded by five molybdenum octahedra, stabilize and structurally isolate the catalytically active centers from each other (site isolation), thereby leading to high selectivity of the desired acrylonitrile product. A detailed reaction mechanism of propane ammoxidation to acrylonitrile is proposed. Combinatorial methodology identified the nominal composition Mo_0.6V_0.187Te_0.14Nb_0.085O _x for maximum acrylonitrile yield from propane, 61.8% (86% conversion, 72% selectivity at 420 °C). We propose that this system, composed of 60% Mo_7.5V_1.5NbTeO₂₉, 40% Mo₆Te₂VO₂₀, and trace TeMo₅O₁₆, functions with a combination of compositional pinning of the optimum orthorhombic Mo_7.5V_1.5±x Nb_1±y Te_1±z O_29± phase and symbiotic mop-up of olefin intermediates through phase cooperation. Under mild reaction conditions, a single optimum orthorhombic composition might suffice as the catalyst; under demanding conditions this symbiosis is additionally required. Improvements in catalyst performance could be attained by further optimization of the elemental distributions at the active catalytic center of Mo_7.5V_1.5NbTeO₂₉, by promoter/modifier substitutions, and incorporation of compatible cocatalytic phases (preferably epitaxially matched). High-throughput methods will greatly accelerate the rational catalyst design processes.     

Study of the Supported K2MoO4 Catalyst for Methanethiol Synthesis by One Step from High H2S-Containing Syngas

ESR and XPS are used to study the Mo-based catalysts MoO₃/K₂CO₃/SiO₂ and K₂MoO₄/SiO₂ prepared with two kinds of precursors, (NH₄)₆Mo₇O₂₄4H₂O and K₂MoO₄. The catalytic properties of the catalysts for methanethiol synthesis from high H₂S-containing syngas are explored. The activity assay shows that the two catalysts have much the same activity for the reaction. By the ESR characterization of both functioning catalysts, the resonant signals of oxo-Mo(V) (g=1.93), thio-Mo(V) (g=1.98) and S (g=2.01 or 2.04) can be detected. In the catalyst MoO₃/SiO₂ modified with K₂CO₃, as increasing amounts of K₂CO₃ are added, the content of oxo-Mo(V) increases, but thio-Mo(V) decreases. The XPS characterization indicates that Mo has mixed valence states of Mo⁴⁺, Mo⁵⁺ and Mo⁶⁺, and that S includes three kinds of species: S^2– (161.5 eV), [S–S]^2– (162.5 eV) and S⁶⁺ (168.5 eV). Adding K₂CO₃ promoter to the catalysts, the Mo species of high valence state is easily sulphided and reduced to Mo₂S and oxo-M(V), and the derivation of [S–S]^2– and S^2– species from S is promoted simultaneously. The methanethiol synthesis is favored if the mole ratio of (Mo⁶⁺ + Mo⁵⁺)/Mo⁴⁺ 0.8 and S^2–/[S–S]^2– is kept at a value of about 1.     

Synthesis and transport properties in La2−xAxMo2O9−δ (A = Ca, Sr, Ba, K) series

The La_2−xA_xMo₂O_9−δ (A = Ca²⁺, Sr²⁺, Ba²⁺ and K⁺) series has been synthesised as nanocrystalline materials via a modification of the freeze-drying method. The resulting materials have been characterised by X-ray diffraction (XRD), thermal analysis (TG/DTA, DSC), scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM). The high-temperature β-polymorph is stabilised for dopant content x > 0.01. The nanocrystalline powders were used to obtain dense ceramic materials with optimised microstructure and relative density >95%. The overall conductivity determined by impedance spectroscopy depends on both the ionic radius and dopant content. The conductivity decreases slightly as the dopant content increases in addition a maximum conductivity value was found for Sr²⁺ substitution, which show an ionic radii slightly higher than La³⁺ (e.g. 0.08 S cm⁻¹ for La₂Mo₂O₉ and 0.06 S cm⁻¹ for La_1.9Sr_0.1Mo₂O_9−δ at 973 K). The creation of extrinsic vacancies upon substitution results in a wider stability range under reducing conditions and prevents amorphisation, although the stability is not enhanced significantly when compared to samples with higher tungsten content. These materials present high thermal expansion coefficients in the range of (13-16) × 10⁻⁶ K⁻¹ between room temperature and 753 K and (18-20) × 10⁻⁶ K⁻¹ above 823 K. The ionic transport numbers determined by a modified emf method remain above 0.98 under an oxygen partial pressure gradient of O₂/air and decreases substantially under wet 5% H₂-Ar/air when approaching to the degradation temperature above 973 K due to an increase of the electronic contribution to the overall conductivity.     

Effect of chalcogen substitution in mixed Mo6S8−nSen (n = 0, 1, 2) Chevrel phases on the thermodynamics and kinetics of reversible Mg ions insertion

The effect of the partial substitution of S by Se atoms in the Mo₆Se_8−nS_n Chevrel phases (CPs), (n = 0, 1, 2), on the reversible intercalation of Mg ions into these hosts was studied by a combination of cyclic voltammetry (CV), galvanostatic cycling, potentiostatic intermittent titration (PITT) and electrochemical impedance spectroscopy (EIS) techniques. Based on the previously published structural characterizations of the CP compounds under study, we describe herein the thermodynamic effect of the substitution in terms of the transformation of a single peak of the differential capacitance for the pure Mo₆X₈ phases (X = S or Se), into a set of a lower amplitude and broader peaks for the mixed (S, Se) CPs, located at less positive potentials compared to that for the pure CP. This is due to the preferential ordering of the Se anions (as compared to that of S anions) in their sites in the CP's crystal structure. In addition to the thermodynamic effect of the substitution, the geometry of the transition state for the mobile Mg ions is modified, thus facilitating the insertion of Mg ions into the partially substituted CP compounds (the kinetic effect). Thereby, the partial charge trapping that characterizes Mg ion insertion into sulfide-based CPs at low temperatures vanishes in the Mg_xMo₆S₆Se₂ compounds. This was nicely confirmed by impedance (EIS) measurements in combination with chronopotentiometry.     

High reversible capacity of SnO2/graphene nanocomposite as an anode material for lithium-ion batteries

A gas–liquid interfacial synthesis approach has been developed to prepare SnO₂/graphene nanocomposite. The as-prepared nanocomposite was characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, and Brunauer–Emmett–Teller measurements. Field emission scanning electron microscopy and transmission electron microscopy observation revealed the homogeneous distribution of SnO₂ nanoparticles (2–6 nm in size) on graphene matrix. The electrochemical performances were evaluated by using coin-type cells versus metallic lithium. The SnO₂/graphene nanocomposite prepared by the gas–liquid interface reaction exhibits a high reversible specific capacity of 1304 mAh g⁻¹ at a current density of 100 mA g⁻¹ and excellent rate capability, even at a high current density of 1000 mA g⁻¹, the reversible capacity was still as high as 748 mAh g⁻¹. The electrochemical test results show that the SnO₂/graphene nanocomposite prepared by the gas–liquid interfacial synthesis approach is a promising anode material for lithium-ion batteries.     

Preparation and characterization of Bi-doped antimony selenide thin films by electrodeposition

Bi-doped antimony selenide (Sb_2−xBi_xSe₃) thin films have been prepared by potentiostatical electrodeposition and post annealing treatment. Cyclic voltammetry (CV) was used to investigate the electrochemical behaviors of electrodeposition. The suitable deposition potential for film preparation was determined to be about −0.40 V vs. SCE combining with CV, energy dispersive X-ray spectroscopy (EDS), environmental scanning electron microscope (ESEM) studies. After annealing, film shows improved crystallinity and a basic orthorhombic Sb₂Se₃ structure but having a larger d-spacing due to the substitution of Bi for Sb in Sb₂Se₃ lattice. The annealed film exhibits an absorption coefficient of larger than 10⁵ cm⁻¹ in the visible region, an direct optical band gap of 1.12 ± 0.01 eV, the n-type conductivity, an carrier concentration of 1.1 × 10¹⁹ cm⁻³ and an flat band potential of −0.40 ± 0.03 V vs. SCE.     

Chitosan–Fe3O4 nanocomposite based electrochemical sensors for the determination of bisphenol A

This paper reports the application of chitosan–Fe₃O₄ (CS–Fe₃O₄) nanocomposite modified glassy carbon electrodes for the amperometric determination of bisphenol A (BPA). We observed that the CS–Fe₃O₄ nanocomposite could remarkably enhance the current response and decrease its oxidation overpotential in the electrochemical detection. Experimental parameters, such as the amount of the CS–Fe₃O₄, the accumulation potential and time, the pH value of buffer solution etc. were optimized. Under the optimized conditions, the oxidation peak current was proportional to BPA concentration in the range between 5.0 × 10⁻⁸ and 3.0 × 10⁻⁵ mol dm⁻³ with the correlation coefficient of 0.9992 and the limit of detection of 8.0 × 10⁻⁹ mol dm⁻³ (S/N = 3). The proposed sensors were successfully employed to determine BPA in real plastic products and the recoveries were between 92.0% and 06.2%. This strategy might open more opportunities for the electrochemical determination of BPA in practical applications. Additionally, the leaching studies of BPA on incubation time using the as-prepared modified electrode were successfully carried out.     

Electrical conductivity and redox stability of La2Mo2−xWxO9 materials

A series of compounds La₂Mo_2−xW_xO₉ (x = 0-2) were synthesized using a freeze-dried precursor method at relatively low temperatures (673-823 K). These materials were characterised by thermogravimetric and differential thermal analysis (TG/DTA), differential scanning calorimetric (DSC), X-ray diffraction (XRD), and transmission electron microscopy (TEM) and dilatometric measurements. Oxygen stoichiometry was evaluated by coulometric titration and thermogravimetric analysis at 873-1273 K. The ionic and electronic conductivities of these materials were analysed by impedance spectroscopy and a Hebb-Wagner ion-blocking method under moderately reducing conditions. The presence of W⁶⁺ leads to an increase of the stability range (about 10⁻¹⁶ Pa for La₂Mo_0.5W_1.5O₉ at 1073 K) and prevents oxygen loss and amorphisation. Within the stability range, the electronic conductivity increases gradually as the temperature increases and as the oxygen partial pressure reduces. This indicates that the electronic transport is mainly n-type as a result of the oxygen-content decreasing in the molybdate lattice. Further reduction of the oxygen partial pressure gave rise to the decomposition of La₂Mo_2−xW_xO₉, leading to the formation of new phases with molybdenum in lower oxidation states, which further enhances the electronic conductivity. The results of the coulometric titration and the thermogravimetric studies under a dry 5% H₂/Ar flow suggest that tungsten doped lanthanum molybdate materials can be used as electrolyte only at low temperature and under moderate reducing conditions.     

The Preparation of Molybdenum Oxynitride by Hydrazine Reduction of MoO3 at Moderate Temperature and Its Application in the Selective Hydrogenation of Long-Chain Linear Alkadienes

Molybdenum oxynitride was prepared by hydrazine reduction of MoO₃ at moderate temperatures. The anhydrous condition was favorable to production of amorphous molybdenum oxynitride, and the presence of hydrogen favored the reduction of Mo⁶⁺ and Mo⁴⁺ species to Mo ⁺ (0 < < 4) species. These molybdenum oxynitrides exhibited activity for hydrogenation which depended on the amount of Mo ⁺ (0 < < 4) species produced under reaction conditions. The amorphous molybdenum oxynitride MoO_1.83N_0.36 catalyst showed a good catalytic activity, selectivity, and resistance to poisoning of H₂S for liquid-phase hydrogenation of longer-chain alkadienes.     

An electrochemical study of H2O2 decomposition on single-phase γ-FeOOH films

The electrochemical reduction and oxidation kinetics of hydrogen peroxide on γ-FeOOH films chemically deposited on indium tin oxide substrates were studied over the pH range of 9.2-12.6 and the H₂O₂ concentration range of 10⁻⁴ to 10⁻² mol dm⁻³. The Tafel slopes for H₂O₂ reduction and oxidation obtained from polarization measurements are 106 ± 4 and 93 ± 15 mV dec⁻¹, respectively, independent of pH and the concentration of H₂O₂. Both the reduction and oxidation of H₂O₂ on γ-FeOOH have a first-order dependence on the concentration of molecular H₂O₂. However, for the pH dependence, the reduction has an inverse first-order dependence, whereas the oxidation has a first-order dependence, on the concentration of OH⁻. For both cases the electroactive species is the molecular H₂O₂, not its base form, HO₂⁻. Based on these observations, reaction kinetic mechanisms are proposed which involve adsorbed radical intermediates; HOOH⁻ and HO for the reduction, and HO₂H⁺, HO₂, and O₂⁻ for the oxidation. These intermediates are assumed to be in linear adsorption equilibria with OH⁻ and H⁺ in the bulk aqueous phase, respectively, giving the observed pH dependences. The rate-determining step is the reduction or oxidation of the adsorbed H₂O₂ to the corresponding intermediates, a reaction step which involves the use of Fe^III/Fe^II sites in the γ-FeOOH surface as an electron donor-acceptor relay. The rate constant for the H₂O₂ decomposition on γ-FeOOH determined from the oxidation and reduction of Tafel lines is very low, indicating that the γ-FeOOH surface is a very poor catalyst for H₂O₂ decomposition.     

Cathodic deposition of molybdenum and vanadium mixed oxyhydroxide films from V-substituted polymolybdophosphate

We report a new electrochemical route for fabricating molybdenum and vanadium mixed oxyhydroxide films on Au electrode from Keggin-type vanadium-substituted polymolybdophosphate. The process involves a potentiodynamic reduction of aqueous 9-molybdo(VI)-3-vanadophosphosphate(V) ([PMo₉V₃O₄₀]⁶⁻) in the potential region between 0 and −0.7 V versus Ag/AgCl. The resulting MoV oxyhydroxide film electrode gave a stable redox behavior in Na₂SO₄ electrolyte of pH 3. X-ray photoelectron spectroscopy revealed that this results from oxidation/reduction of Mo⁵⁺/Mo⁶⁺ in the film which accompanies extraction/insertion of protons for charge compensation. The deposited V ions remained in the film upon repetitive potential cycling without affecting their oxidation state. Voltammetric data in the presence of sodium nitrite showed electrocatalytic activity of the MoV oxyhydroxide toward the electroreduction of nitrite.     

Investigation of electrochemical behavior of Mn–Co doped oxide electrodes for electrochemical capacitors

The electrochemical properties of nanocrystalline Co-doped Mn oxide electrodes were investigated to determine the relationship between physicochemical feature evolution and the corresponding electrochemical behavior of synthesized electrodes. Co-doped Mn oxide electrodes with a rod-like morphology and antifluorite-type structure were synthesized by anodic electrodeposition on Au coated Si substrates from a dilute solution of 0.01 M Mn acetate (Mn(CH₃COO)₂) and 0.001 M Co sulphate (CoSO₄).Electrochemical characterization of synthesized electrodes, with and without a conducting polymer (PEDOT) coating, was performed with electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) at different scan rates. In addition, structural characterization of as-deposited and cycled electrodes was conducted using SEM, TEM and XPS.Capacitance values for all deposits increased with increasing scan rate to 100 mV s⁻¹, and then decreased after 100 mV s⁻¹. The Mn–Co oxide/PEDOT electrodes showed improved specific capacity and electrochemical cyclability relative to uncoated Mn–Co oxides. Mn–Co oxide/PEDOT electrodes with rod-like structures had high capacitances (up to 310 F g⁻¹) at a scan rate of 100 mV s⁻¹ and maintained their capacitance after 500 cycles in 0.5 M Na₂SO₄ (91% retention). Capacitance reduction for the deposits was mainly due to the loss of Mn ions by dissolution in the electrolyte solution.     

Li-ion diffusion kinetics in LiMn2O4 thin films prepared by pulsed laser deposition

LiMn₂O₄ thin films were deposited on Au substrates by pulsed laser deposition (PLD). The Li-ion chemical diffusion coefficients of the films, , were measured by cyclic voltammetry (CV), galvanostatic intermittent titration technique (GITT), potentiostatic intermittent titration technique (PITT), and electrochemical impedance spectroscopy (EIS). It was found that the values by CV and PITT were in the order of 10⁻¹³ cm² s⁻¹, and those by EIS and GITT were in the range of 10⁻¹³ to 10⁻¹¹ and 10⁻¹⁴ to 10⁻¹¹ cm² s⁻¹, respectively. These data were compared with the previously reported values.     

A novel platform of hemoglobin on core–shell structurally Fe3O4@Au nanoparticles and its direct electrochemistry

A novel platform, which hemoglobin (Hb) was immobilized on core–shell structurally Fe₃O₄/Au nanoparticles (simplified as Fe₃O₄@Au NPs) modified glassy carbon electrode (GCE), has been developed for fabricating the third biosensors. Fe₃O₄@Au NPs, characterized using transmission electron microscope (TEM), scanning electron microscope (SEM) and energy dispersive spectra (EDS), were coated onto GCE mediated by chitosan so as to provide larger surface area for anchoring Hb. The thermodynamics, dynamics and catalysis properties of Hb immobilized on Fe₃O₄@Au NPs were discussed by UV–visible spectrum (UV–vis), electrochemical impedance spectroscopy (EIS), electrochemical quartz crystal microbalance technique (EQCM) and cyclic voltammetry (CV). The electrochemical parameters of Hb on Fe₃O₄@Au NPs modified GCE were further carefully calculated with the results of the effective working area as 3.61 cm², the surface coverage concentration (Γ) as 1.07 × 10⁻¹² mol cm⁻², the electron-transfer rate constant (K_s) as 1.03 s⁻¹, the number of electron transferred (n) as 1.20 and the standard entropy of the immobilized Hb (ΔS⁰′) as calculated to be −104.1 J mol⁻¹ K⁻¹. The electrocatalytic behaviors of the immobilized Hb on Fe₃O₄@Au NPs were applied for the determination of hydrogen peroxide (H₂O₂), oxygen (O₂) and trichloroacetic acid (TCA). The possible functions of Fe₃O₄ core and Au shell as a novel platform for achieving Hb direct electrochemistry were discussed, respectively.     

Insertion electrochimique de nickel et de manganese dans les chalcogenures Mo6S8 et Mo6Se8

The Mo₆X₈, Mⁿ⁺/M_xMo₆X₈ redox systems have been studied by use of an electrode prepared in an original way. The voltamperograms and the analysis of modification of the solid structures allow us to determine the successive stages of the Ni²⁺ and Mn²⁺ cation insertion into the Mo₆Se₈ and Mo₆Se₈ host lattices.     

Kinetic Investigation of the Photocatalytic Reduction of Nitric Oxide by Carbon Monoxide at Low Pressure on Silica-Supported Molybdenum Oxide

The kinetics of photoinduced reactions that occur upon UV irradiation (<360 nm) of a MoO₃/SiO₂ catalyst (2.5 wt% Mo) in CO-NO mixtures and CO alone are studied at gas pressures from 0.05 to 2 torr and for CO/NO ratios from 0.3 to 3.0 in the temperature interval 20-150C. The data obtained are consistent with a previously proposed two-stage redox mechanism. In the first stage NO is reduced to N₂O through the reaction CO+2NO CO₂+N₂O, while in the second stage the N₂O formed is further reduced to N₂ via the reaction CO+N₂O CO₂+N₂. The ratio of rate constants for quenching of a transient excited state (Mo⁵⁺-O^-)* by NO and CO molecules is found to be 2.8. The reaction rates decrease with increasing temperature, apparently because of a lower concentration of adsorbed species and/or a reduction of the steady-state concentration of (Mo⁵⁺-O^-)*.     

Nanoporous gold as non-enzymatic sensor for hydrogen peroxide

Nanoporous gold (NPG) fabricated by dealloying Au–Ag film was investigated for the non-enzymatic detection of H₂O₂. The apparent activation energy of H₂O₂ electrochemical reduction on NPG was found to be as low as ∼30 kJ mol⁻¹. The reduction currents at −0.4 V vs. SCE demonstrated a strict linear dependence in a wide H₂O₂ concentration region from 10 μM to 8 mM with a detection limit 3.26 μM. Furthermore, the biosensor based on NPG exhibited high selectivity, good reproducibility, and long-term stability. These results indicate that NPG could be a promising electrochemical material for H₂O₂ detection.