Synthesis,extraction, and adsorption properties of calix[4]arene‐poly(ethylene‐glycol) crosslinked polymer

Novel calix[4]arene‐poly(ethylene glycol) crosslinked polymer (CCP) has been synthesized by the polycondensation reaction between a p‐tert‐butylcalix[4]arene derivative and dihydroxyl capped poly(ethylene glycol) (DHPEG, M_n = 1000) catalyzed by neodymium tosylate. The hydrogel, consisted of 66.9% water and 33.1% CCP, can selectively extract aromatic organic molecules from aqueous solution according to the diameter of the guest molecules, which infers that the diameter of the calix[4]arene cavity is about 5.4 Å and the conformation of calix[4]arene units altered from cone conformation to 1,3‐alternate conformation during the polycondensation reaction. Furthermore, CCP can also adsorb naphthalene from gas phase, showing much higher capacity than active carbon does, which may have some potential applications in the field of separation and environment protection. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Multiwalled carbon nanotube-4-tert-butyl calix[6]arene composite electrochemical sensor for clenbuterol hydrochloride determination by means of differential pulse adsorptive stripping voltammetry

The electrochemical behavior of clenbuterol hydrochloride (CLB) was studied at a multiwalled carbon nanotube-4-tert-butyl calix[6]arene composite chemically modified electrode by means of cyclic voltammetry, electron impedance spectroscopy, and differential pulse adsorptive stripping voltammetry. Surface characterization of the electrode was carried out by means of SEM. The results revealed that 4-tert-butyl calix[6]arene along with multiwalled carbon nanotubes demonstrated a high sensitivity for determination of CLB. Employing differential pulse adsorptive stripping voltammetry allowed a linear response over the concentration range of 1.99?×?10^?8–4.76?×?10^?5?M with a detection limit of 1.38?×?10^?9?M for CLB. The described method has been applied for the estimation of CLB in biological fluids such as urine and serum.     

Multifunctional,robust, and self-healable polyurethane coatings cross-linked by Diels–Alder reaction of calix[4] arenes containing furan groups

Self-healing coatings can restore their performance after inevitable damage and are promising in the industry owing to their longer service life and lower repair cost. The use of Diels–Alder reaction bonds is well-known to generate thermally self-healing coatings. In this study, a series of cross-linked self-healing polyurethane (PU) coatings were synthesized through Diels–Alder reactions of p-tert-butyl calix[4]arene bearing furan groups (C4A-FA) as a new chain extender and a bismaleimide (BMI) polyether amine as a Diels–Alder cross-linking agent. Adding C4A-FA to PUs improves their mechanical properties, thermal stability, and self-healing ability. Additionally, these modifications can result in the formation of composite networks with PU that exhibit thermoreversibility and self-healing properties. These changes have led to PUs containing modified calix[4]arene (C4A-FA) having better properties compared with unmodified calix[4]arene PUs. The properties of prepared coatings were evaluated by Fourier transform infrared spectroscopy, scanning electron microscope, differential scanning calorimetry (DSC), thermogravimetric analyses (TGA), and tensile tests compared with a typical PU sample. The tensile and TGA results show an improvement in the thermal and mechanical properties of the polymers by increasing the C4A-FA content. By replacing 15% of butandiol (BDO) with C4A-FA in PU pure, the tensile strength increased from 1.69 to 5.14 MPa. Furthermore, adding diels–alder (DA) bonds enhanced the tensile strength to 10.49 MPa for PU-C4A15-DA. According to DSC results, a broad endothermic peak from nearly 80–140°C confirmed the retro-DA reactions in the synthesized thermoreversible samples. The healing efficiency of the PU-C4A15-DA sample was obtained at 92.5% (measured by tensile test), which is the highest value among cross-linked self-healing PUs reported in the literature.     

Novel linear molecular aggregation tethered by hydrogen-Bonded interaction within the crystalline calix[4]arene derivatives

Single crystals of two calix[4]arene derivatives, that is, 5,11,17,23-tetra-tert-butyl- 25,27-bis[2-[N-(3-methoxy-4-methoxy-benzylidene)-amino]ethoxy]-26,28- dihydroxy calix[4]arene (1) and 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[3- pyridine carbonyl-amino]ethoxy]-26,28-dihydroxy calix[4]arene (2), were prepared and their crystal structures have been determined by X-ray crystallographic study. As compared with calix[4]arene derivative 1 possessing CN functional group, compound 2 bearing the NH group could form not only intermolecular hydrogen bonds between the hydrogen atom in NH group and the oxygen atom in CO of an adjacent calix[4]arene molecule, but also intramolecular hydrogen bonds between the N—H⋯OC moieties in solid state, giving a rare linear molecular aggregation.     

Calixarenes 30. Calixquinones

Chlorine dioxide and thallium trifluoroacetate are shown to be useful reagents for the preparation of calixquinones. p-H-Calix[4]arene( 1a ),p-H-calix[5]arene ( 1b ), and p-H-calix[6]arene ( 1c ) are oxidized in modest yields by ClO₂ to the fully quinonoid compounds calix[4]tetraquinone ( 2a ), calix[5]pentaquinone ( 2b ), and calix[6]hexaquinone ( 2c ), respectively. Although Tl(OCOF₃)₃ is less effective for the oxidation of 1a-c , it proves to be the reagent of choice for converting partially etherified or esterified calixarenes carrying p-tert-butyl groups directly to partially quinonoid calixarenes. Thus, monosubstituted calix[4]arenes yield triquinones; disubstituted calix[4]arenes yield diquinones; trisubstituted calix[4]arenes yield monquinones; and tetrasubstituted calix[6]arenes yield diquinones. The structures of the calixquinones have been established by elemental analysis, ¹H NMR spectroscopy, mass spectroscopy, and in the case of 2c by X-ray crystallography. Since the starting materials are readily accessible, the calixquinones become easily available compounds for further study.     

Chiral Calix[4]arenes-Bearing Prolinamide Functionality as Organocatalyst for Asymmetric Direct Aldol Reactions in Water

The chiral calix[4]arene derivative (6) bearing an L-prolinamido group has been designed and proved to be a water compatible efficient organocatalysts for a direct enantioselective aldol reaction. Compound 6 catalyzes the aldol reaction of cyclohexanone and a variety of aromatic aldehydes yielding anti-aldol products in high yield with enantioselectivities of up to 93% and diastereoselectivity of up to 95:5.     

Calix[4]arene‐tetranitrone as crosslinker in dental composite materials

The synthesis of a functionalized calix[4]arene bearing 1,3‐dipolaric nitrone groups ( 5 ) has been carried out. The reaction of N‐methylhydroxylamine or N‐propylhydroxylamine with the carbonyl group of 5,11,7,23‐tetraformyl‐25,26,27,28‐tetraalkoxycalix[4]arene leads to calix[4]arenes bearing a nitrone function at each of the four para‐positions. Via 1,3‐dipolar cyclo‐addition of acrylic acid methyl ester with the nitrone functions of 5 , subsequently an upper rim‐substituted tetraisoxalidinecalix[4]arene is quantitatively synthesized. Further, the minimization of shrinkage of a dental filling depending on the amount of calix[4]arene‐tetranitrone is discussed. Copyright © 2011 Society of Chemical Industry     

Electrochemical oxidation of <Emphasis Type="Italic">p</Emphasis>-sulfonated calix[8]arene

The water-soluble p-sulfonated sodium salt of calix[8]arene (III) was synthesized. The product was characterized by FT-IR, NMR and UV–Vis spectra.Then the electrochemical behaviors of p-sulfonated sodium salt of calix[8]arene in NaAc+HAc (pH = 4) buffer solution was studied. In aqueous solution, p-sulfonated calix[8]arene can be oxidized when the potential is more than 0.7 V vs SCE. It was confirmed that the reaction was a two-electron irreversible electrochemical reaction. The transfer coefficient, α, was measured as 0.7. At 25°, the diffusion coefficient of p-sulfonated calix[8]arene was determined as 8.6 × 10⁻⁷ cm² s⁻¹. The diffusion activation energy of p-sulfonated calix[8]arene was 18.9 kJ mol⁻¹ at pH = 4.     

Methacrylated calix[4]arene phosphonic acids as functionalized crosslinker for radical polymerization

We describe the synthesis of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐dioxypropylphosphonic acid‐26,28‐dimethacryloyloxy‐calix [4]arene and 5,11,17,23‐tetra‐tert‐butyl‐25‐oxypropylphosphonic acid‐27‐hydroxy‐26,28‐dimethacryloyloxy‐calix[4]arene starting from para‐tert‐butyl‐calix[4]arene. The complete reaction was proved by matrix‐assisted laser desorption ionization time of flight mass spectrometry and nuclear magnetic resonance spectroscopy. The influence of these compounds on the kinetics of the radical polymerization of methyl methacrylate was shown by dilatometry. Furthermore, the adhesive properties of dental adhesives containing these calix[4]arene derivatives were investigated. Copyright © 2012 Society of Chemical Industry     

Selective Extraction of Fe3+ Cation by Calixarene-Based Cyclic Ligands

Abstract

The selective liquid-liquid extraction of Fe³⁺ cation from the aqueous phase to the organic phase was carried out by using p-tert-butylcalix[4]arene [L₁], ca-lix[4]arene [L₂], p-nitro-calix[4]arene [L₃], calix[4]arene p-sulfonic acid [L₄], p-(diethylamino)methylcalixt4]arene [L₅], tetramethyl-p-tert-butylcalix[4]arene tet-raketone [L₆], 25,27-dimethyl-26,28-dihydroxy-p-tert-butylcalix[4]arene diketone [L₇], calix[4]arene-bearing dioxime group on the lower rim [L₈], and a monooxime [L₉]. The effect of varying pH upon the extraction ability of calixarenes substituted with electron-donating and electron-withdrawing groups at their p-position was examined. Observed results were compared with those found for unsubstituted calix[4]arene.     

Voltammetric characterization of selective potassium ion transfer across micro-water/1,2-dichloroethane interface facilitated by a novel calix[4]arene derivative

In this study, transfer reactions of alkali and alkaline-earth metal ions across a micro-water/1,2-dichloroethane (1,2-DCE) interface facilitated by a novel calix[4]arene derivative, 5,11,17,23-tetra-tert-butyl-25,27-bis(2′amino-methylpyridine)-26,28-dihydroxy calix[4]arene (APHC4), were investigated by cyclic and differential pulse voltammetry techniques. Well-defined voltammetric behavior was obtained only for K⁺ ion among the used metal ions. The electrochemical data were used to determine the stoichiometry and the appropriate association constant of the occurring complex between K⁺ ion and APHC4. The obtained steady-state voltammograms indicated that the facilitated transfer process occurs with a TIC/TID mechanism according to 1:1 stoichiometry. The logarithm of the association constant () of K(APHC4)⁺ complex in the DCE phase was calculated to be 6.32. Also, the availability of the facilitated transfer for the design of an amperometric screening sensor for K⁺ ion was evaluated in the range of 50–500 μmol dm⁻³.     

Preparation and behavior of calix[4]arene‐containing organosilicone resins (I)

Two organosilicone resins (PCSN and PCSNN) were prepared from 1,3‐bis‐glycidyl‐p‐tert‐butyl‐calix[4]arene(BGC) via condensation with triethoxyaminopropylsilane or triethoxy‐4‐azo‐6‐aminohexylsilane, followed by copolymerization with tetraethoxysilane, respectively. The resins exhibit high thermostability and adsorb nitrogen under elevation temperature. The adsorption capacity of PCSN and PCSNN toward Mg(II), Cu(II), Pb(II), Hg(II), and Au(III) cations was determined and the thermodynamic parameter of the resins toward Au(III) ion was deduced. Human serum protein was also adsorbed on the resins. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 58–64, 2001     

Molecular Reinforcement of Transparent Materials With Acrylamide‐Modified Calix[4]arene as a Crosslinker

The synthesis of 5,11,17,23‐amino‐25,26,27,28‐propoxycalix[4]arene (calix[4]amine, 4 ) starting from 5,11,17,23‐nitro‐25,26,27,28‐propoxy‐calix[4]arene ( 3 ) via microwave‐assisted transfer hydrogenation is reported. Furthermore, the calix[4]amine ( 4 ) is functionalized with an acrylamide moiety. The swelling behavior in water, the influence on the glass transition temperature, and the shear modulus of a crosslinked N,N‐dimethylacrylamide (NDA) polymer with 5,11,17,23‐acrylamido‐25,26,27,28‐propoxycalix[4]arene ( 5 ) and EGDMA, respectively, are investigated.

     

Coordination chemistry of a para-tert-octylcalix[4]arene fitted with phosphinoyl pendant arms towards 4f-elements: Extraction,synergism, separation

The solvent extraction of trivalent lanthanoids (Ln³⁺) by 5,11,17,23-tetra(para-tert-octyl)-25,26,27,28-tetrakis(dimethylphosphinoylmethoxy)calix[4]arene (S), bearing four phosphine oxide donor groups at the lower rim as synergistic agent in combination with a 4-benzoyl-3-methyl-1-phenyl-2-pyrazolin-5-one (HP) in CHCl₃ from chloride medium at µ = 0.1 was quantitatively described in the form of LnP₃·S complexes. The role of the synergistic agent on the extraction process was discussed. The values of the separation factors have been evaluated. On the basis of the IR and NMR spectra the stoichiometry and the structure of the solid mixed complex of Eu(III) with HP and S were proposed.     

杯芳烃／聚丙烯共混体系耐热氧性能的研究

合成了对叔丁基杯[4]、杯[6]、杯[8]芳烃,并用热重法和烘箱老化评价了共混体系的耐热氧性能。结果表明,杯芳烃能明显提高聚丙烯的耐热氧性能,其耐热氧能力为：对叔丁基杯[6]芳烃＞对叔丁基杯[4]＜2,6－二叔丁基－4－甲基苯酚。     

Molecular composites obtained by polyaniline synthesis in the presence of p‐octasulfonated calixarene macrocycle

Polyaniline (PANI) molecular composites were synthesized by chemical oxidative polymerization of the aniline and aniline dimer, N‐phenyl‐1,4‐phenylendiamine, in the presence of a macrocycle, calix[8]arene p‐octasulfonic acid (C8S), using ammonium peroxidisulfate as oxidant. The macrocycle has acted both as acid dopant and surfactant to obtain processable PANI‐ES. The PANI/calix[8]arene p‐octasulfonic acid composite was also obtained by a simple doping of PANI emeraldine base form with calix[8]arene sulfonic acid. The structure of materials was confirmed by Fourier transform infrared, UV–vis and nuclear magnetic resonance spectroscopy. All synthesized composite materials are amorphous and soluble in chloroform, dimethylsulfoxide, NMP, showing excellent solution‐processing properties combined with electrical conductivity. Cyclic voltammetry evidenced a good electroactivity for the composite films. Dielectric properties (dielectric constant and dielectric losses) were determined and are comparable with those of other PANI/ionic acid polymer composites. Preliminary studies have evidenced a high dielectric constant (10⁴ at 100 Hz) and electrical conductivity of 6 × 10^?3 S/cm for PANI composites. From sulfur elemental analysis of the PANI/calixarene, it results that the content in macrocycle is ～30% (weight). © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

氮杂杯[6]芳烃的合成与表征

以三聚氯氰和对苯二胺为原料,碳酸钾或氢氧化钾作为缚酸剂,合成氮杂杯[6]芳烃第一步中间体N,N’-二(4,6-二氯-1,3,5-均三嗪-2-基)-1,4-苯二胺(Ⅰ)和第二步中间体2,4-二(4-胺基苯胺基)-6-氯-1,3,5-均三嗪(Ⅱ),再由(Ⅰ)和(Ⅱ)合成最终产物氮杂杯[6]芳烃。通过红外光谱分析法和核磁共振氢谱法对产物进行了表征,证实其为目标产物,从而验证了合成路线的可行性。     

Droplet-based microreactor system for stepwise recovery of precious metal ions from real metal waste with calix[4]arene derivatives

ABSTRACT

Stepwise recovery of silver(I), palladium(II) and platinum(IV) with suitable calix[4]arene extractants was carried out by investigating the extraction and stripping process using a droplet-based microreactor system. The highest percentages of silver, palladium (100%) and platinum ion (37.2%) were extracted from a real waste only within 4.00s using a microreactor system compared with 24 and 72 h to reach extraction equilibrium in a batch method. Fourier transform infrared spectroscopy studies revealed a very good relation in peak shifts on the metal complexation with calix[4]arene derivatives after extraction and stripping. The droplet-based microreactor system emerges as an effective tool to be applied in metal recovery.     

Synthesis and Characterization of Mesoporous Silica Functionalized with Calix[]arene Derivatives

This work reports a new method to covalently attach calix[4]arene derivatives onto MCM-41, using a diisocyanate as a linker. The modified mesoporous silicates were characterized by fourier transform infrared spectroscopy (FTIR), thermal analysis (TGA) and elemental analysis. The FTIR spectra and TGA analysis verified that the calix[4]arene derivates are covalently attached to the mesoporous silica. The preservation of the MCM-41 channel system was checked by X-ray diffraction and nitrogen adsorption analysis.     

Feasibility Studies on Palladium Extraction from Leach Liquors of Automotive Catalysts Using p-Diethylphosphonomethylthiacalix[6]arene

Feasibility studies for the recovery of Pd(II) from leach liquors of automotive catalysts using p-diethylphosphonomethylthiacalix[6]arene (1) and p-tert-butylthiacalix[6]arene (2) were conducted. Compound 1 was found to be a more efficient extractant than 2 for Pd(II) ions, indicating selective extraction of Pd(II) ions [E% = 98.4%] from the leach liquors. The majority of other metal ions present in the leached solution were not extracted except Zr(IV) ions [E% = 22%]. Stripping of the Pd(II) ions from the extractants was performed using acidic thiourea, thereby enabling the recycling of the extractants.