Synthesis and performances of 9,9-bis(perfluorohexylethyl propionate) fluorene copolymers

2,7-dibromo-9,9-bis(perfluorohexylethyl propionate) fluorene was synthesized by Michael addition reaction using 2,7-dibromofluorene and perfluorohexyl ethyl acrylate as the reactants. 9,9-Bis(perfluorohexylethyl propionate) fluorene copolymers were then synthesized by Suzuki coupling reaction with 2,7-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborane-diyl)-9,9 -dioctyl fluorene, 2,7-dibromo-9,9-dioctyl fluorene and 2,7-dibromo-9,9-bis(perfluorohexylethyl propionate) fluorene as the monomers. The fluorinated fluorene copolymers were characterized and investigated via Fourier infrared spectroscopy (FTIR), hydrogen nuclear magnetic resonance spectroscopy (¹HNMR), ultraviolet absorption spectroscopy (UV–vis), cyclic voltammetry (CV) and photoluminance spectroscopy (PL). Because of the long fluorine-containing alkyl side chain, the ultraviolet absorption peak of 9,9-bis(perfluorohexylethyl propionate) fluorene is blue-shifted compared with poly(9,9-dioctylfluorene)(PF8). The LUMO energy level increases and the energy band gap of copolymers widens. Due to the self-assembly of the long fluoroalkyl side chain, the photoluminance spectra of 9,9-bis(perfluorohexylethyl propionate) fluorene copolymers exhibit a new excimer emission peak at 550 nm. The photoluminance stabilities of the copolymers under irradiation and humid conditions are significantly improved due to protective effect from the long fluoroalkyl side chain. After being irradiated under 500 W iodine tungsten lamp or kept under 70% relative humid conditions, the 9,9-bis(perfluorohexylethyl propionate) fluorene copolymers showed much better photoluminance stability than that of poly(9,9-dioctylfluorene) (PF8). These show that introducing long fluoroalkyl side chain into conjugated polymer main chain is a promising strategy to improve environmental stability of devices based on organic conjugated polymers.     

Synthesis, Structure, and Properties of Aromatic Ring-Layered Polymers Containing Ferrocene as a Terminal Unit

[2.2]Paracyclophane-layered polymers 4a and 4b end-capped by ferrocene and [2.2]paracyclophane, respectively, were synthesized by using a xanthene skeleton as a scaffold. Two model compounds, 4,5-bis(ferrocenylethynyl)-9,9-dimethylxanthene 7 and pseudo-p-bis(4-ferrocenylethynyl-9,9-dimethylxanthen-5-yl)[2.2]paracyclophane 8, comprising ferrocenes arranged in a face-to-face manner were also prepared. According to the X-ray molecular structure of compound 8, [2.2]paracyclophane between the ferrocenes had sufficient space for twisting and there was no interaction between two ferrocenes via [2.2]paracyclophane in the ground state. These polymers exhibited blue-light emission originating from the layered cyclophanes; however, the photoluminescence intensity of polymer 4a was lower than that of polymer 4b. The fluorescence emission of polymer 4a was effectively quenched by the end-capping ferrocene group. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Fluorene‐based conjugated polymer with tethered thymines: click postpolymerization synthesis and optical response to mercury(II)

A kind of fluorene‐based conjugated polymer with tethered thymine (T) groups {poly[(9,9‐dioctyl)‐2,7‐fluorene‐{9,9‐dioctyl‐4–1,2,3‐triazol‐[5‐(hydroxymethyl)tetrahydrofuran‐2‐yl]‐5‐methylpyrimidine‐2,4(1H,3H)‐dione}‐2,7‐fluorene]‐co‐[(9,9‐dioctyl)‐2,7‐fluorene‐4,7‐bis(5‐thiophen‐2‐yl)benzo‐2,1,3‐thiadiazole] ( P‐3 )} was successfully synthesized by a Cu(I)‐catalyzed click reaction between the acetylene‐substituted polymer precursor {poly[(9,9‐dioctyl)‐2,7‐fluorene‐(9,9‐dioctyl‐4‐phenylacetylene fluorene)]‐co‐[(9,9‐dioctyl)‐2,7‐fluorene‐4,7‐bis(5‐thiophen‐2‐yl)benzo‐2,1,3‐thiadiazole]} and 3′‐azido‐3′‐deoxythymidine. The chemical structures of the intermediates and target polymer were verified by Fourier transform infrared spectroscopy and ¹H‐NMR analyses. The specific binding with Hg²⁺ of P‐3 was corroborated by ultraviolet–visible spectroscopy and photoluminescence analyses against other metal ions. The results show that P‐3 possessed selectivity and sensitivity toward Hg²⁺. Around 77% of photoluminescence intensity of P‐3 was quenched when the concentration of Hg²⁺ reached 7.7 × 10^?4 M and with a detection limit in the range of about 4.8 μM. A comparison experiment suggested that a synergic effect of the tethered T and S atoms interrelated with Hg²⁺ existed in P‐3 . Most of the fluorescence intensity of P‐3 was recovered upon the addition of iodide anions to the P‐3 /Hg²⁺ complex; this suggested that P‐3 could be used as a potential reversible optical Hg²⁺ probe. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

The synthesis and characterization of photonic materials composed of substituted fluorene donors and a porphyrin acceptor

Three novel porphyrin derivatives namely 5,10,15,20-tetra-[7-cyanophenyl-9,9’-bis-(2-ethylhexyl)fluoren-2-yl]-porphyrin, 5,10,15,20-tetra-[7-(4-acetylphenyl)-9,9’-bis-(2-ethylhexyl)fluoren-2-yl]-porphyrin and 5,10,15,20-tetra-[7-pyrenyl-9,9’-bis-(2-ethylhexyl)fluoren-2-yl]-porphyrin were synthesized. Substitution of the aryl groups on the meso-fluorene using Suzuki-Miyaura coupling enabled a study to be undertaken of the energy transfer from the meso fluorenyl to the porphyrin core. To calculate the extent of energy transfer, the corresponding model fluorene compounds 7-cyanophenyl-9,9’-bis-(2-ethylhexyl)fluorene, 7-acetylphenyl-9,9’-bis-(2-ethylhexyl)fluorene and 7-pyrenyl-9,9’-bis-(2-ethylhexyl)fluorene were also synthesized. Fluorescence studies of both the porphyrin derivatives and model compounds showed efficient energy transfer occured from the aryl-fluorene donor to the porphyrin acceptor. Upon excitation, due to energy transfer, a characteristic porphyrin emission was observed at ∼656 nm; ∼99% energy transfer in solution was observed in these donor–acceptor systems. Thin-film emission results indicate a low degree of aggregation in the donor–acceptor systems.     

Synthesis and characterization of amino-functional, blue light-emitting copolymers and their composites with CdTe nanocrystals

Random side-chain functionalized copolymers were synthesized, utilizing a facile Yamamoto protocol by applying 2,7-dibromo-9,9-bis(6-bromohexyl)-9H-fluorene, (E)-1,2-bis(4-bromophenyl)ethene, 2,7-dibromo-9,9-dioctyl-9H-fluorene as comonomers. The precursor copolymers were post-functionalized utilizing di-n-propylamine and the resulting target copolymers were fully characterized. The optical classification parameters have been determined in solutions and in thin films as well. The copolymers revealed blue light emission, wide optical bandgaps Eg_opt of at least 2.84 eV and remarkable quantum yields up to 0.78 in chloroform solutions. The amino-functional copolymers allowed tying semiconductor CdTe nanocrystals.     

2,7-二溴-9-二烷硫基亚叉芴的合成及表征

以芴为起始原料,合成了2,7-二溴-9-二甲硫基亚叉芴、2,7-二溴-9-二十二烷硫基亚叉芴、2,7-二溴-9-二苄硫基亚叉芴和2,7-二溴-9-二硫代乙烯撑亚叉芴4种新的芴衍生物.所得产物的结构经IR,NMR表征.     

Photophysical properties of fluorene‐based copolymers synthesized by connecting twisted biphenyl units with fluorene via para‐ and meta‐linkages

BACKGROUND: Wide bandgap semiconducting polymers are of great interest in the development of organic and polymeric emissive materials for display purposes since they can be used to generate light of all colors either by irradiation of luminescent dyes or by energy transfer to emissive dopants. The aim of the present work is to construct new fluorene‐based semiconducting polymers with a wide bandgap. RESULTS: A novel polyfluorene derivative, poly[(9,9‐dihexyl‐2,7‐fluorene)‐alt‐(5,7‐dihydrodibenz[c,e]oxepin)], with a wide bandgap, was synthesized by connecting rigidly twisted biphenyl monomers with dihexylfluorene via para‐linkages and it was compared with poly[(9,9‐dihexyl‐2,7‐fluorene)‐alt‐(spirocyclohexane‐1,6′‐dibenzo[d,f][1,3]dioxepin)], which has meta‐linkages. Both polymers emit in the ultraviolet and blue regions. Electronic spectral absorption data and electrochemical measurements demonstrate that ca 40° torsion angle of the biphenyl units induces an increase in the HOMO–LUMO gap of 0.18 eV, and that meta‐linkage of the twisted segment in the polymer induces another increase of 0.24 eV compared to polydihexylfluorene. CONCLUSION: The new twisted biphenyl compounds are efficient segments to tune the bandgaps of conjugated polymers. The two fluorene‐based copolymers have wide bandgaps and exhibit potential as host materials. Copyright © 2008 Society of Chemical Industry     

Synthesis and characterization of novel poly(arylene ether)s based on 9,10‐bis‐(4‐fluoro‐3‐trifluoromethylphenyl) anthracene and 2,7‐bis‐(4‐fluoro‐3‐trifluoromethylphenyl) fluorene

Two new bisfluoro monomers 9,10‐bis‐(4‐fluoro‐3‐trifluoromethylphenyl) anthracene and 2,7‐bis‐(4‐fluoro‐3‐trifluoromethylphenyl) fluorene have been synthesized by the cross‐coupling reaction of 2‐fluoro‐3‐trifluoromethyl phenyl boronic acid with 9,10‐dibromo anthracene and 2,7‐dibromo fluorine, respectively. These two bisfluoro compounds were used to prepare several poly(arylene ether)s by aromatic nucleophilic displacement of fluorine with various bisphenols; such as bisphenol‐A, bisphenol‐6F, bishydroxy biphenyl, and 9,9‐bis‐(4‐hydroxyphenyl)‐fluorene. The products obtained by displacement of the fluorine atoms exhibits weight‐average molar masses up to 1.5 ×10⁵ g mol^?1 and number average molecular weight up to 6.8 × 10⁴ g mol^?1 in GPC. These poly(arylene ether)s show very high thermal stability even up to 490°C for 5% weight loss occurring at this temperature in TGA in synthetic air and showed glass transition temperature observed up to 310°C. All the polymers are soluble in a wide range of organic solvents, e.g., CHCl₃, THF, NMP, and DMF. Films cast from DMF solution are brittle in nature. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

The synthesis and characterization of photonic materials composed of substituted fluorene donors and a porphyrin acceptor

Three novel porphyrin derivatives namely 5,10,15,20-tetra-[7-cyanophenyl-9,9’-bis-(2-ethylhexyl)fluoren-2-yl]-porphyrin, 5,10,15,20-tetra-[7-(4-acetylphenyl)-9,9’-bis-(2-ethylhexyl)fluoren-2-yl]-porphyrin and 5,10,15,20-tetra-[7-pyrenyl-9,9’-bis-(2-ethylhexyl)fluoren-2-yl]-porphyrin were synthesized. Substitution of the aryl groups on the meso-fluorene using Suzuki-Miyaura coupling enabled a study to be undertaken of the energy transfer from the meso fluorenyl to the porphyrin core. To calculate the extent of energy transfer, the corresponding model fluorene compounds 7-cyanophenyl-9,9’-bis-(2-ethylhexyl)fluorene, 7-acetylphenyl-9,9’-bis-(2-ethylhexyl)fluorene and 7-pyrenyl-9,9’-bis-(2-ethylhexyl)fluorene were also synthesized. Fluorescence studies of both the porphyrin derivatives and model compounds showed efficient energy transfer occured from the aryl-fluorene donor to the porphyrin acceptor. Upon excitation, due to energy transfer, a characteristic porphyrin emission was observed at 656 nm; 99% energy transfer in solution was observed in these donor–acceptor systems. Thin-film emission results indicate a low degree of aggregation in the donor–acceptor systems.     

Synthesis and antimicrobial activities of some ethyl 2-arylthio-6-arylimidazo[2,1-b]thiazole-3-carboxylates and their sulfones

A series of new 2-arylthio-3-ethoxycarbonyl-6-arylimidazo[2,1-b]thiazoles (4a–4h) and 2-arenesulfonyl-3-ethoxycarbonyl-6-arylimidazo[2,1-b]thiazoles (5a–5h) have been prepared and characterized by analytical and spectral methods. The title compounds 4a–4h and 5a–5h were obtained by the reaction of 2-amino-4-ethoxycarbonyl-5-arylthiothiazoles (2a and 2b)/2-amino-4-ethoxycarbonyl-5-arenesulphonyl-thiazoles (3a and 3b) with various phenacyl bromides in anhydrous ethanol. These newly synthesized compounds (4a–4h and 5a–5h) were screened for their antibacterial activity against Gram-negative bacterium Escherichia coli, Gram-positive bacterium Staphylococcus aureus, and antifungal properties against Aspergillus niger and Candida albicans.     

Synthesis and Thermal Characterization of Novel Fluorene-Based Polysiloxane Derivatives

Three novel poly(tetramethylsilfluorenylenesiloxane) derivatives having different substituent at 9-position of fluorenylene moiety, i.e. dimethyl (P1), spirocyclohexyl (P2), and spirofluorenyl (P3) substituents, were obtained by polycondensation of novel three disilanol monomers, i.e. 2,7-bis(dimethylhydroxysilyl)-9,9-dimethyl- fluorene (M1), 2’,7’-bis(dimethylhydroxysilyl)-spiro(cyclohexane-1,9’-fluorene) (M2), 2,7-bis(dimethylhydroxysilyl)-9,9’-spirobifluorene (M3), respectively. P1–P3 exhibited the good solubility in common organic solvents, such as tetrahydrofuran (THF), chloroform, dichloromethane, and toluene. It was suggested from the differential scanning calorimetry (DSC) and the X-ray diffraction analysis that P1 exhibited the crystallinity whereas P2 and P3 were amorphous polymers. The glass transition temperature (T _g) determined by DSC and the temperature at 5% weight loss (T _d5) determined by thermogravimetry (TG) were dependent on the substituent at 9-position on fluorene; both orders of T _g and T _d5 were P3 > P2 > P1, indicating the bulkiness of substituent at 9-position of fluorene resulted in the good thermal stability. It is noteworthy that amorphous P3 exhibiting very high T _g of 156 °C and T _d5 of 535 °C is a new heat-resistant polysiloxane derivative as well as a promising candidate for blue-light-emitting materials.     

Facile synthesis and characterization of novel bis(2-S-alkylpyridines) and bis(3-aminothieno[2,3-b]pyridines) incorporating 1,3-diarylpyrazole moiety

3-(4-Hydroxyphenyl)-1-phenyl-1H-pyrazole-4-carbaldehyde (1) is condensed with acetophenone to afford the corresponding unsaturated carbonyl compound 4 whose potassium salt is reacted with 1,4-dibromobutane to afford the bis-unsaturated carbonyl compound 3. Both carbonyl compounds 3 and 4 are reacted with 2-cyanoethanethioamide, through Michael addition reaction followed by cyclocondensation, to prepare the starting materials bis(pyridine-2(1H)-thione) derivative 5 and pyridine-2(1H)-thione derivative 8. Two synthetic routes to synthesize the target materials 7 and 14 are described to get the most efficient method for preparation and maximum yield%. The first route came from the direct alkylation of the bis(pyridine-2(1H)-thione) derivative 5 using iodomethane (6a) and benzyl chloride (6b) to afford the corresponding bis(2-S-alkylpyridine) derivatives 7a,b. The reaction of 5 with halo-containing compounds 10a–d to synthesize the target materials bis(3-aminothieno[2,3-b]pyridine) derivatives 14a–d failed under various reaction conditions. The second route involves the reaction of pyridine-2(1H)-thione derivative 8 with 6a,b and 10a–d to afford the corresponding 2-S-alkylpyridine derivatives 9a,b and 3-aminothieno[2,3-b]pyridine derivatives 13a–d, through the formation of 2-S-alkylpyridine derivatives 12a–d followed by a Thrope-Ziegler reaction, whose potassium salts reacted with 1,4-dibromobutane to afford the corresponding target materials 7a,b and 14a–d, respectively. The structures of target molecules were elucidated using elemental analyses and spectral data.     

Stereoselective synthesis of dominicalure 1 and 2: Components of aggregation pheromone from male lesser grain borerRhyzopertha dominica (F.)

Dominicalure 1 (9a) and dominicalure 2 (9b), were synthesized by esterification of ,-unsaturated acids4a and4b with (S)-(+)-2-pentanol (8). The key step was the asymmetric reduction of 3-penten-2-one (5) to give the chiral intermediate6, which, upon diimide reduction, DNB derivatization, recrystallization, and hydrolysis, yielded8 in 63% ee. Acids4a and4b were prepared in a simple and efficient three-step synthesis with an overall yield of 54% and 62%, respectively, in stereoisomerically pure form.     

Novel Polymeric Metal Complexes of 2,7-Bis[2-(2′-Pyridyl) Benzimidazole]- 9,9′-Dioctylfluorene with Cu(II)and Zn(II): Synthesis and Luminescence Properties

Abstract  A novel ligand, 2,7-bis[2-(2′-Pyridyl)benzimidazole]- 9,9′-dioctylfluorene (BPDOF) and its polymeric complexes with copper(II) and zinc(II) were successfully synthesized and characterized by ¹H NMR, FT-IR, elemental analysis, UV-vis, conductivity measurements and gel permeation chromatography. The UV–vis absorption, fluorescence spectra, and thermal properties of these complexes were investigated at room temperature. The experimental results show that polymeric metal complexes BPDOF-Cu(II) and BPDOF-Zn(II) emit purple/green luminescence at 430 and 509 nm in DMF solution and emit green luminescence at 495 and 527 nm in the solid state. Thermal properties measurement and analysis show that they have good thermal stabilities. Graphical Abstract  Synthesis route: 2,7-bis[2-(2′-Pyridyl) benzimidazole]- 9,9′-dioctylfluorene (BPDOF) was synthesized using 2-(2′-Pyridyl)benzimidazole and 2,7-dibromo-9,9′-dioctylfluorene by Ullmann condensation. Polymeric metal complexes of the corresponding were synthesized with CuCl₂ · 2H₂O, ZnCl₂.      

Synthesis of some new fused thiopyrano[2,3-d]thiazoles and their derivatives

A series of some new fused thiopyrano[2,3-d]thiazole derivatives have been synthesized by a stereo-selective hetero-Diels-Alder reaction of 5-(2,4-dihydroxy-benzylidene)-4-thioxo-thiazolidine derivatives 3a,b with acrylonitrile, ethyl acrylate, N-phenylmale-imide, ω-nitrostyrene and N-phenyl-1, 3, 4-triazole-2,5-dione. 5-Amino-9-hydroxy-dihydro-benzopyrano[3′,4′:4,5]thiopyrano[2,3-d]thiazol-6-one derivatives 14a,b have been synthesized by Michael addition of 3a,b with malononitrile. Structures and conceivable mechanisms are discussed.     

An efficient microwave-assisted synthesis of thieno[2,3- b ]quinolines under solvent-free conditions

A novel and efficient method for the synthesis of substituted thieno[2,3-b]quinolines has been developed. A simple one-pot reaction of 3-formyl-2-mercaptoquinolines 2a–l with 1-chloroacetone, 2-chloroacetamide, ethyl chloroacetate and 2-chloro-1-phenylethanone in presence of catalytic amount of potassium carbonate under microwave irradiation and solvent-free conditions gave thieno[2,3-b]quinolin-2-ylethanone derivatives 3a–e, thieno[2,3-b]quinoline-2-carboxamide derivatives 4a–e, ethyl thieno[2,3-b]quinoline-2-carboxylate 5a–e and phenyl(thieno[2,3-b]quinolin-2-yl)methanone derivatives 6a–e compounds respectively. The structures of all the newly synthesised compounds were elucidated on the basis of elemental analysis, IR, ¹H NMR and mass spectral data.     

Steric effect in the free radical polymerization of vinyl ethers containing electron-deficient olefin groups

Summary o-(2-Vinyloxyethoxy)benzylidenemalononitrile (3a), methyl o-(2-vinyloxyethoxy)benzylidenecyanoacetate (3b), 1,3-di-(2'-dicyanovinyl)-5-methyl-2-(2'-vinyloxyethoxy)benzene (4a), methyl 1,3-di-(2'-carbomethoxy-2'-cyanovinyl)-5-methyl-2-(2'-vinyloxyethoxy)benzene (4b), 2,3,4-tri-(2'-vinyloxyethoxy)benzylidenemalononitrile (5a), methyl 2,3,4-tri-(2'-vinyloxyethoxy)benzylidenecyanoacetate (5b), 2,4,6-tri-(2'-vinyloxyethoxy)benzylidenemalononitrile (6a), and methyl 2,4,6-tri-(2'-vinyloxyethoxy)benzylidenecyanoacetate (6b) were prepared by the condensation of o-(2-vinyloxyethoxy) benzaldehyde (1a), 2-(2'-vinyloxyethoxy)-5-methylisophthaldehyde (1b), 2,3,4-tri-(2'-vinyloxyethoxy)benzaldehyde (2a), 2,4,6-tri-(2'-vinyloxyethoxy)benzaldehyde (2b) with malononitrile or methyl cyanoacetate, respectively. Vinyl ether compounds 3a–b and 5a–b were polymerized readily by free radical initiators to give optically transparent swelling poly(vinyl ethers) 7a–b and 9a–b. Compounds 4a–b and 6a–b did not polymerize by radical initiators due to the steric hindrance. Polymers 7a–b and 9a–b were not soluble in common organic solvents such as acetone and DMSO due to crosslinking. Polymers 7a–b and 9a–b showed a thermal stability up to 300°C in TGA thermograms. Received: 1 December 1999/Revised version: 14 February 2000/Accepted: 16 February 2000     

Dependence of optical properties on the preparation methods of poly[(9,9′‐dialkylfluorene‐2,7‐diyl)‐alt‐(1,3,4‐oxadiazole‐2,5‐diyl)]

A blue‐light‐emissive fluorene‐based polyoxadiazole, an n‐type polyfluorene derivative, was synthesized by both one‐step and two‐step methods. Directly polymerized poly[(9,9′‐didodecylfluorene‐2,7‐diyl)‐alt‐(1,3,4‐oxadiazole‐2,5‐diyl)] (PFOx‐DP) exhibited a higher molecular weight and a more efficient photoluminescence quantum yield than poly[(9,9′‐didodecylfluorene‐2,7‐diyl)‐alt‐(1,3,4‐oxadiazole‐2,5‐diyl)] (PFOx) prepared via a polyhydrazide precursor, poly[9,9′‐didodecylfluorene‐2,7‐(2,5‐dihydrazide‐ 1,3,4‐oxadiazole). Both polymers, differently prepared, showed similar photoluminescent properties in 1,2‐dichloroethane. However, in a film state, the influence of the interchain interactions on the photoluminescence of PFOx with the lower molecular weight was larger than on the photoluminescence of PFOx‐DP. The electron‐deficient property of an oxadiazole group in the polymer backbone resulted in low‐lying highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels of ?6.29 and ?3.26eV, respectively, of the polymer suitable for electron‐transport/hole‐blocking layers and emissive layers in multilayer electroluminescence devices. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3112–3118, 2004     

Synthesis and characterization of new imidazole and fluorene–bisphenol based polyamides: Thermal,photophysical and antibacterial properties

A new para-linked diether-diamine, 9,9-bis{4-[2-(4,5-diphenylimidazol-2-yl)-4-aminophenoxy] phenyl}fluorene (III), bearing fluorene–bisphenol and two ortho-linked diaryl-substituted imidazole rings were synthesized by the catalytic reduction of the nitro groups of compound (II), 9,9-bis{4-[2-(4,5-diphenylimidazol-2-yl)-4-nitrophenoxy]phenyl}fluorene, by using hydrazine monohydrate in the presence of Pd/C. Compound (II) was synthesized by the nucleophilic chloro displacement reaction of the synthesized 2-(2-chloro-5-nitrophenyl)-4,5-diphenyl-1H-imidazole with 9,9-bis(4-hydroxyphenyl)fluorene in refluxing DMAc in the presence of potassium carbonate. This diamine was condensed directly with aliphatic and aromatic diacids via the Yamazaki–Higashi phosphorylation method in the presence of triphenylphosphite (TPP), pyridine (Py) and halide salt to give high molecular polyamides (PAs). The synthesized PAs were obtained in quantitative yields with inherent viscosities between 0.51 and 0.76 dL g^?1. The structures of diamine and PAs were characterized by elemental analysis, FT-IR and NMR spectroscopy, and properties of PAs were investigated by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and UV–visible and fluorescence spectroscopy. The PAs showed good solubility in aprotic and polar organic solvents, with high thermal stability exhibiting the glass transition temperatures (T_gs) and 10% weight loss temperatures (T_10%) in the range of 226–330 °C and 400–466 °C in air, respectively, and fluorescence emission with maximum wavelengths (λ_em) in the range of 417–473 nm with quantum yields (Φ_f) of 9–35%. Two of these polymers together with compounds (II) and (III) were also screened for antibacterial activity against Gram positive and Gram negative bacteria.     

Synthesis of isoelectronic polyazomethine and poly(arylene vinylene) by a palladium‐catalyzed Suzuki coupling method

Two fully conjugated copolymers containing 2,7‐(9,9‐dioctyl) fluorene and 3,6‐(N‐hexyl‐9H‐carbazole) disubstituted rings and arylene vinylene or azomethine units in the main chain were synthesized through a palladium‐catalyzed Suzuki coupling method of 2,7‐bis(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)‐9,9‐dioctyl fluorene with 1,4‐bis(6‐bromo‐N‐hexyl‐9H‐carbazole‐3‐yl vinyl) benzene or N,N‐bis(6‐bromo‐N‐hexyl‐9H‐carbazole‐3‐yl methylidene) 1,4‐phenylenediamine. Bisbromine arylene vinylene and arylenazomethine monomers were synthesized by condensation of 3‐formyl‐N‐hexyl‐6‐bromo carbazole with tetraethyl‐p‐xylylene diphosphonate or 1,4‐phenylenediamine. Copolymers were characterized by FTIR, ¹H‐NMR, DSC, UV‐visible and photoluminescence methods. Copyright © 2005 Society of Chemical Industry