Preparation and electrochemical properties of poly‐2,5‐dihydroxyaniline/activated carbon composite electrode in organic electrolyte

Poly‐2,5‐dimethoxyaniline coating has been fabricated on active carbon (AC) substrates by cyclic voltammetry (CV) in organic system. The resulted coating is hydrolyzed to produce poly‐2,5‐dihydroxyaniline (PDHA) to enhance the capacitance of the composite electrode. Scanning electron microscope, Fourier transform infrared spectroscopy, X‐ray diffraction, Raman spectra, CV, electrochemical impedance spectroscopy, and galvanostatic charge/discharge test are used to investigate the properties of these electrodes. In organic electrolyte, due to the introduced hydroquinone units, high value of capacitance up to 975 F g^?1 of the PDHA/AC has been obtained at a current density of 0.37 A g^?1 at a potential window of 0–1.5 V. An asymmetric capacitor has been assembled with the PDHA/AC positive and pure AC negative electrodes, which is able to obtain a specific energy as high as 178 Whkg^?1 in the potential range of 0–2.0 V at a current density of 0.93 A g^?1. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Ag nanowires and its application as electrode materials in electrochemical capacitor

Silver nanowires were synthesized on a large scale by using anodic aluminum oxide (AAO) film as templates and serving ethylene glycol as reductant. Their morphological and structural characterizations were characterized with field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and selected area electron diffraction (SAED). The electrochemical properties of silver nanowires as electrode materials for electrochemical capacitors were investigated by cyclic voltammetry (CV) and galvanostatic charge/discharge technique in 6 M KOH aqueous electrolyte. The Ag₂O/Ag coaxial nanowires were formed by the incomplete electrochemical oxidation during the charge step. The maximum specific capacitance of 987 F g^?1 was obtained at a charge–discharge current density of 5 mA cm^?2.     

Facile synthesis of graphene/polyaniline composite hydrogel for high-performance supercapacitor

The graphene/polyaniline (PANI) composite hydrogel was successfully prepared by a one-step hydrothermal method. The morphology and structure of the sample were characterized by digital camera, scanning electron microscopy, and Fourier transform infrared spectroscopy spectra. By combining the advantages of high conductivity of graphene and high pseudocapacitance of PANI, the composite hydrogel was taken as supercapacitor electrode material. Cyclic voltammetry and galvanostatic charge/discharge experimental results show that the composite has excellent electrochemical performance. The specific capacitance value is 258.5 F g^?1 at a scan rate of 2 mV s^?1 and the specific capacitance value is up to 307 F g^?1 at a current density of 0.2 A g^?1. The specific capacitance value can still maintain 90 % of the initial value after repeating the galvanostatic charge–discharge for 1000 cycles at a current density of 1.0 A g^?1 showing good cycle stability.     

Ionic conductivity and dielectric studies of acid doped cellulose acetate propionate solid electrolyte for supercapacitor

Phosphoric acid doped cellulose acetate propionate (CAP) consisting of poly(ethylene glycol) (PEG) as plasticizer was investigated. Ionic conductivities and dielectric studies were carried at different temperature with varying concentration of H₃PO₄ using AC impedance method. The highest conductivity was 8.1 × 10^?4 S cm^?1 at 343 K and a long tail was featured in dielectric studies indicating good capacitance nature of the electrolyte. Interactions between added constituents were observed in FTIR and differential scanning calorimetry studies. Thin and compact fabricated supercapacitor demonstrated specific capacitance of 64 F g^?1 using cyclic voltammetry. Furthermore, the supercapacitor properties like AC impedance and charge‐discharge were studied. Stability was up to 96% at 1000th cycle. POLYM. ENG. SCI., 56:196–203, 2016. © 2015 Society of Plastics Engineers     

秸秆基碳材料在Li2SO4电解液中的电化学性能

以生物质秸秆为碳源,利用水热结合KOH活化法制备了多孔碳材料,对其结构与形貌进行了表征。采用三电极体系,在不同浓度的Li₂SO₄电解液中,对多孔碳电极进行循环伏安、恒电流充放电和交流阻抗测试。结果表明,在0.5 mol·L^-1的Li₂SO₄电解液中,秸秆基生物质碳材料呈现出较好的电化学性能。当电流密度为0.5 A·g^-1时,比电容可达224 F·g^-1;经1500次充放电测试后,比电容保持率高达94.1%,循环性能良好。     

Effect of unequal load of carbon xerogel in electrodes on the electrochemical performance of asymmetric supercapacitors

This paper investigates the electrochemical performance of asymmetric supercapacitors in an environmentally friendly aqueous electrolyte (1.0 mol L^?1 sodium sulfate solution). The asymmetric configuration is based on the use of a highly porous carbon xerogel as active material in both the positive and negative electrodes, but the carbon xerogel loading in each electrode has been substantially modified. This configuration leads to an increase in the operational voltage window up to values of 1.8 V and consequently to a higher specific capacitance (200 F g^?1) and energy density (~25 Wh kg^?1). Four different mass ratios were employed (1, 1.5, 2 and 3), and the electrochemical response of the cells was evaluated by means of cyclic voltammetry, galvanostatic charge–discharge and impedance spectroscopy. The results demonstrate that the optimal carbon mass ratio in the electrodes is about 2.0 because in these conditions the devices are able to operate with a maximum cell voltage of 1.8 V and with a high electrical efficiency.     

The effect of halide ion concentration on capacitor performance

The effect of halide ion concentration on the capacitor performance was considered during this study. Iodide anion has been selected as the most profitable halide taking into account its electrochemical properties and environmental impact. Several concentrations of NaI were tested (from 0.25 to 5 mol L^?1 aqueous solutions) using as electrodes two commercial activated carbons and one KOH-activated carbon. Detailed electrochemical investigation by galvanostatic charging/discharging, cyclic voltammetry, and impedance spectroscopy confirmed the significant impact of iodide concentration on the supercapacitor behavior. The higher concentration of iodide affected especially the performance of positive electrode; increase of iodide concentration changed the potential range of positive electrode and its capacitance increased from 119 F g^?1 for 0.25 mol L^?1 NaI to 475 F g^?1 for 2 mol L^?1 NaI solution. The electrode capacitance measured in two-electrode system at current density of 2 A g^?1 ranged from 198 F g^?1 for 0.25 mol L^?1 NaI to 272 F g^?1 for 2 mol L^?1 NaI solution (capacitance expressed as average of the positive and negative electrode capacitances). It has been proved that 2 mol L^?1 alkali metal iodide solution is an optimal electrolyte for the capacitor based on KOH-activated carbon. High capacitance values and perfect stability (100 % retention) of such systems have been observed during long-term galvanostatic charging/discharging (15,000 cycles). In addition, satisfactory floating tests at extended voltage range (1.2 V) were performed.     

Electrodeposition and characterization of nickel–copper metallic foams for application as electrodes for supercapacitors

Nickel–copper metallic foams were electrodeposited from an acidic electrolyte, using hydrogen bubble evolution as a dynamic template. Their morphology and chemical composition was studied by scanning electron microscopy and related to the deposition parameters (applied current density and deposition time). For high currents densities (above 1 A cm^?2) the nickel–copper deposits have a three-dimensional foam-like morphology with randomly distributed nearly-circular pores whose walls present an open dendritic structure. The nickel–copper foams are crystalline and composed of pure nickel and a copper-rich phase containing nickel in solid solution. The electrochemical behaviour of the material was studied by cyclic voltammetry and chronopotentiometry (charge–discharge curves) aiming at its application as a positive electrode for supercapacitors. Cyclic voltammograms showed that the Ni–Cu foams have a pseudocapacitive behaviour. The specific capacitance was calculated from charge–discharge data and the best value (105 F g^?1 at 1 mA cm^?2) was obtained for nickel–copper foams deposited at 1.8 A cm^?2 for 180 s. Cycling stability of these foams was also assessed and they present a 90 % capacitance retention after 10,000 cycles at 10 mA cm^?2.     

Mini-chunk biochar supercapacitors

Biochar prepared from the pyrolysis of maple wood was studied as supercapacitor electrode materials. Three kinds of electrodes were fabricated: mini-chunk electrodes, thin-film electrodes, and large-disk-chunk electrodes. Their capacitive behaviors were studied using cyclic voltammetry, galvanostatic charge–discharge, and electrochemical impedance spectroscopy. The mini-chunk supercapacitor shows an electrochemical behavior similar to the supercapacitor using the thin-film electrodes. It exhibits outstanding performance characteristic of a high specific capacitance of approximately 32 F g^?1 and a high stability without obvious capacitance decays upon 2,600 potential cycles. This indicates that the mini-chunk supercapacitor can be used as an mF-scale power source for electronic device applications. Moreover, the mini-chunk electrode provides a simple and fast technique to evaluate biochar materials used as potentially high-performance, low-cost, and environmental friendly supercapacitor electrodes without the need of binder and complicated fabrication procedures. However, the supercapacitor using large-disk-chunk biochar electrodes shows lower specific capacitive performance due to the high ohmic resistance stemming from long tubular structures within biochar.     

Enhanced capacitance of a NiO electrode prepared in the magnetic field

The enhancement of the surface alignment by magnetic field had a great theoretical and practical significance in the improvement of electrochemical capacitor. In the present study, the NiO nanowires were synthesized by liquid-phase reduction method, and the electrode was prepared within external magnetic field. The effects of magnetic field on the electrode surface and the electrochemical behavior were investigated. X-ray diffraction and scanning electron microscope studies showed that the applied magnetic field results in an orderly surface structure of the electrode, which induced an effective transfer path for the electrons and ions. Meanwhile, the orderly electrode surface improved the electrochemical capacitance, as well as decreased the internal resistance. It was found on the cyclic voltammetry and galvanostatic charge/discharge measurements that the electrode prepared with the magnetic field displays an increased capacitance (506 F g^?1), high power density (135.8 W kg^?1) and energy density (17.6 Wh kg^?1), and improved cycle stability compared to the electrode without magnetic field. Electrochemical impedance spectroscopy results demonstrated enhanced electrochemical properties for the addition of magnetic field.     

Coconut kernel-derived activated carbon as electrode material for electrical double-layer capacitors

Carbonization of milk-free coconut kernel pulp is carried out at low temperatures. The carbon samples are activated using KOH, and electrical double-layer capacitor (EDLC) properties are studied. Among the several samples prepared, activated carbon prepared at 600 °C has a large surface area (1,200 m² g^?1). There is a decrease in surface area with increasing temperature of preparation. Cyclic voltammetry and galvanostatic charge–discharge studies suggest that activated carbons derived from coconut kernel pulp are appropriate materials for EDLC studies in acidic, alkaline, and non-aqueous electrolytes. Specific capacitance of 173 F g^?1 is obtained in 1 M H₂SO₄ electrolyte for the activated carbon prepared at 600 °C. The supercapacitor properties of activated carbon sample prepared at 600 °C are superior to the samples prepared at higher temperatures.     

Enhanced performance by polyaniline/tailored carbon nanotubes composite as supercapacitor electrode material

Polyaniline/tailored carbon nanotubes composite (PANI/TCN) synthesized via situ polymerization of aniline monomer in the presence of tailored carbon nanotubes (TCN) is reported as electrode material for supercapacitors. The morphology, structure, and thermostability of the composite were characterized by scanning electron microscope, Fourier transform infrared, and thermogravimetric analysis. The electrochemical property of the resulting material was systematically studied using cyclic voltammetry and galvanostatic charge–discharge. The results show that the short rod‐like PANI dispersed well in the TCN with three‐dimensional network structure. The as‐prepared composite shows high specific capacitance and good cycling stability. A specific capacitance of 373.5 F g^?1 at a current density of 0.5 A g^?1 was achieved, which is much higher than that of pure PANI (324 F g^?1). Meanwhile, the composite retains 61.7% capacity after 1000 cycles at a scan rate of 50 mV s^?1. The enhanced specific capacitance and capacity retention indicates the potential of composite as a promising supercapacitor electrode material. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39971.     

Fabrication of the nitrogen doped ordered porous carbon derived from amino-maltose with excellent capacitance performance

In this paper, pristine and nitrogen doped ordered porous carbon materials were fabricated by using maltose and amino-maltose synthesized by hydrothermal reaction as precursors via template strategy. The fabricated pristine ordered porous carbon (OPC) and nitrogen doped ordered porous carbon (NOPC) exhibit excellent textural properties and good capacitance performance, which specific surface area (S_BET) reach 1107 and 726 m² g^?1 for the pristine OPC and NOPC materials while the specific capacitance reach up to 139 and 183 F g^?1 under a current density of 0.5 A g^?1, respectively. The capacitance retention rate for the pristine OPC and NOPC reaches ca. 81 and 92% as the current density increased from 0.5 to 20 A g^?1, and no apparent capacitance decrease was observed after 5000 cycles. Although a sharp decrease of specific surface area was observed after N doping, the specific capacitance of NOPC was improved about 31% than that of the pristine OPC, the enhanced wettability and surface availability after N doping were found to be responsible for the enhanced capacitance performance of NOPC.     

Electrosorption on activated biochar: effect of thermo-chemical activation treatment on the electric double layer capacitance

Biochar, a by-product of woody biomass pyrolysis, is investigated as a renewable and low-cost carbon-based electrode material for electric double layer (EDL) applications. To increase the surface area and porosity of the biochar chemical (7 M KOH) and thermal (at 675 and 1,000 °C, respectively) activation treatments are applied. The thermo-chemically activated biochar samples are investigated by a combination of physico-chemical surface characterization and electrochemical methods to reveal the relationship between the activation process variables, the resulting porous carbon structural features and EDL capacitance. For electrochemical testing, the activated biochar is sprayed onto Ni mesh current collectors with or without Nafion^® as binder. Based on cyclic voltammetry experiments in 0.1 M NaCl–0.1 M NaOH a maximum EDL capacitance of 167 F g^?1 is obtained for the activated biochar electrode prepared at 675 °C. The latter capacitance is about 50 times higher than the EDL capacitance of a Vulcan XC-72 electrode prepared and tested under identical conditions. The activated biochar electrodes show also promising galvanostatic charge/discharge behavior and electrical conductivities up to 0.058 S cm^?1 indicating suitability for EDL-type applications.     

Synthesis of rGO/nanoclay/PVK nanocomposites,electrochemical performances of supercapacitors

ABSTRACT

In this study, graphene oxide (GO) was chemically reacted with sodium borohydride (NaBH₄) to form reduced graphene oxide (rGO). rGO, Montmorillonite nanoclay, and polyvinylcarbazole (PVK) were used to form a ternary nanocomposite via chemical reaction. These nanocomposite qualities were described via scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDX), Fourier transform infrared spectroscopy-attenuated transmission reflectance (FTIR-ATR). In addition, these materials were used in supercapacitor device as an active material to test electrochemical performances via cyclic voltammetry (CV), galvanostatic charge–discharge (GCD), and electrochemical impedance spectroscopy (EIS). The rGO/nanoclay/PVK nanocomposite shows significantly improved specific capacitance (C_sp = 168.64 Fg^?1) compared to that of rGO (C_sp = 63.26 Fg^?1) at the scan rate of 10 mVs^?1 by CV method. The enhanced capacitance results in high power density (P = 5522.6 Wkg^?1) and energy density (E = 28.84 Whkg^?1) capabilities of the rGO/nanoclay/PVK nanocomposite material. The addition of nanoclay and PVK increased the specific capacitance of rGO material due to a dopant effect for supercapacitor studies. Ragone plots were drawn to observe energy and power density of supercapacitor devices. The C_sp of rGO/nanoclay/PVK nanocomposite has only 86.4% of initial capacitance for charge/discharge performances obtained by CV method for 5000 cycles.     

Hydrothermal and soft-templating synthesis of mesoporous NiCo2O4 nanomaterials for high-performance electrochemical capacitors

Mesoporous nickel cobaltite (NiCo₂O₄) nanoparticles were synthesized via a hydrothermal and soft-templating method through quasi-reverse-micelle mechanism. The physicochemical properties of the NiCo₂O₄ materials were characterized via X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectra, and nitrogen sorption isotherms measurements. The electrochemical performances of the NiCo₂O₄ electrode were investigated by cyclic voltammetry, chronopotentiometry, and electrochemical impedance spectroscopy tests. The obtained NiCo₂O₄ materials exhibit typical mesoporous structures, with an average particle size of about 200 nm, a specific surface area of 88.63 m² g^?1, and a total pore volume of 0.337 cm³ g^?1. The facile electrolytes penetration for the mesoporous structures favors high-performance of the NiCo₂O₄ electrode. The NiCo₂O₄ electrode shows a high specific capacitance (591 F g^?1 at 1 A g^?1), high-rate capability (248 F g^?1 at 20 A g^?1), and a good cycling behavior for tested 3,000 cycles, indicating a promising application for electrochemical capacitors.     

A redox‐mediator‐doped gel polymer electrolyte applied in quasi‐solid‐state supercapacitors

Methylene blue (MB) redox mediator was introduced into polyvinyl alcohol/polyvinyl pyrrolidone (PVA/PVP) blend host to prepare a gel polymer electrolyte (PVA‐PVP‐H₂SO₄‐MB) for a quasi‐solid‐state supercapacitor. The electrochemical properties of the supercapacitor with the prepared gel polymer electrolyte were evaluated by cyclic voltammetry, galvanostatic charge–discharge, electrochemical impedance spectroscopy, and self‐discharge measurements. With the addition of MB mediator, the ionic conductivity of gel polymer electrolyte increased by 56% up to 36.3 mS·cm^?1, and the series resistance reduced, because of the more efficient ionic conduction and higher charge transfer rate, respectively. The electrode specific capacitance of the supercapacitor with PVA‐PVP‐H₂SO₄‐MB electrolyte is 328 F·g^?1, increasing by 164% compared to that of MB‐undoped system at the same current density of 1 A·g^?1. Meanwhile, the energy density of the supercapacitor increases from 3.2 to 10.3 Wh·kg^?1. The quasi‐solid‐state supercapacitor showed excellent cyclability over 2000 charge/discharge cycles. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39784.     

Preparation and capacitance performance of polyaniline/titanium nitride nanotube hybrid

A polyaniline/titanium nitride (PANI/TiN) nanotube hybrid was prepared and used for an electrochemical supercapacitor application. Firstly, the well-aligned TiN nanotube array was prepared by anodization of titanium foil and subsequent nitridation through ammonia annealing. Then, PANI was deposited into TiN nanotube through the electrochemical polymerization process. The obtained PANI/TiN nanotube hybrid had an ordered porous structure. A high specific capacitance of 1,066 F g^?1 was obtained at the charge–discharge current density of 1 A g^?1 when only the mass of PANI was considered. The specific capacitance can even achieve 864 F g^?1 at 10 A g^?1 and still keep 93 % of the initial capacity after 200 cycles. An aqueous supercapacitor, consisting of two symmetric PANI/TiN nanotube hybrid electrodes and 1.0 M H₂SO₄ electrolyte solution, showed the specific capacitance of 194.8 F g^?1, energy density of 9.74 Wh kg^?1, and power density of 0.3 kW kg^?1.     

Ionic conductivity studies and dielectric studies of Poly(styrene sulphonic acid)/starch blend polymer electrolyte containing LiClO4

Proton and lithium-ion conducting biodegradable solid polymer electrolytes were prepared using blends of poly(styrene sulphonic acid) (PSSA) and starch for supercapacitor applications. The ionic conductivities have been calculated using the bulk impedance obtained through impedance spectroscopy with varying blend ratio and plasticizer. Glycerol as plasticizer improved the film formation property, while lithium perchlorate (LiClO₄) as dopant enhanced the conductivity. The maximum conductivity has been found to be 5.7?×?10^?3?Scm^?1 at room temperature for 80/20 (PSSA/starch) blend ratio. The dielectric studies showed relaxation peaks indicating proton and Li⁺ conduction in the plasticized polymer blend matrix and dielectric modulus also exhibited a long tail feature indicating good capacitance. Differential scanning calorimetry thermograms showed two peaks and decreased with varying blend ratio and plasticizer. A carbon?Ccarbon supercapacitor was fabricated using suitable electrolyte, and its electrochemical characteristics using cyclic voltammetry, AC impedance and galvanostatic charge?Cdischarge were studied. Supercapacitor showed a fairly good specific capacitance of 115?Fg^?1 at 10?mV s^?1.     

供电子基取代联苯胺类共轭聚合物的光电性质及电化学性能

通过取代基修饰增强联苯胺单元供电子性,使其与缺电子的苯甲醛单元共聚,基于简单结构设计合成了一组具有给体-受体型结构的聚联苯胺基共轭聚合物聚物。采用H NMR、FT-IR,XRD对单体及聚合物进行了结构表征,表明各目标产物成功制得。通过Uv-vis、Uv-vis-DRS、循环伏安、计时电位、交流阻抗以及循环性能测试对各共聚物进行了光电性质及电化学性能测试。结果表明,引入甲氧基后制得的共轭聚合物P3分子链共轭程度较高,结晶性较佳,光学带隙E_g^opt为2.09 eV,该样品具有较高的HOMO及较低的LUMO值,分别为-5.15 eV和-3.06 eV,呈现更好的氧化还原性,相应地也表现出较佳的电化学电容特性。0.3 A/g时,P3恒流充放电首次放电比电容达1030 F/g,经700次循环仍保持在530 F/g。