具有输入饱和的近空间飞行器鲁棒控制

针对近空间飞行器这一类存在外部扰动,输入饱和和参数不确定的多输入多输出线性系统,提出了一种基于干扰观测器的抗饱和鲁棒控制方案.将干扰观测器与抗饱和控制技术相结合,从而消除系统存在的未知外部扰动、输入饱和和不确定性对系统控制的影响.首先,设计干扰观测器对线性外部系统产生的未知扰动进行估计.然后根据干扰观测器输出,通过超前抗饱和方法设计抗饱和补偿器,并将其加入到鲁棒控制器的设计中,保证闭环系统存在输入饱和、未知外部扰动和参数不确定情况下的稳定性.为便于设计,干扰观测器、抗饱和补偿器和控制器设计矩阵均通过求解线性矩阵不等式得到.最后,将提出的鲁棒抗饱和控制方法应用于近空间飞行器,仿真结果验证了该控制方案的有效性.     

Synthesis of Mixed Objective Output Feedback Robust Model Predictive Control

Aiming at the constrained polytopic uncertain system with energy‐bounded disturbance and unmeasurable states, a novel synthesis scheme to design the output feedback robust model predictive control(MPC)is put forward by using mixed H₂/H_∞ design approach. The proposed scheme involves an offline design of a robust state observer using linear matrix inequalities(LMIs)and an online output feedback robust MPC algorithm using the estimated states in which the desired mixed objective robust output feedback controllers are cast into efficiently tractable LMI‐based convex optimization problems. In addition, the closed‐loop stability and the recursive feasibility of the proposed robust MPC are guaranteed through an appropriate reformulation of the estimation error bound (EEB). A numerical example subject to input constraints illustrates the effectiveness of the proposed controller.     

Robust H/sub /spl infin// control for uncertain discrete-time-delay fuzzy systems via output feedback controllers

This work investigates the problem of robust output feedback H/sub /spl infin// control for a class of uncertain discrete-time fuzzy systems with time delays. The state-space Takagi-Sugeno fuzzy model with time delays and norm-bounded parameter uncertainties is adopted. The purpose is the design of a full-order fuzzy dynamic output feedback controller which ensures the robust asymptotic stability of the closed-loop system and guarantees an H/sub /spl infin// norm bound constraint on disturbance attenuation for all admissible uncertainties. In terms of linear matrix inequalities (LMIs), a sufficient condition for the solvability of this problem is presented. Explicit expressions of a desired output feedback controller are proposed when the given LMIs are feasible. The effectiveness and the applicability of the proposed design approach are demonstrated by applying this to the problem of robust H/sub /spl infin// control for a class of uncertain nonlinear discrete delay systems.     

变采样周期网络化系统鲁棒容错控制

针对网络控制系统中存在的时变采样周期与时延,通过矩阵Jordan 变换与分解, 将采样周期和时延的不确定性转变为系统结构参数的不确定性,建立了离散时间凸多面体不 确定系统模型。在此基础上,首先设计观测器,保证系统状态和故障估计收敛于实际值。接 着,根据估计的故障,设计了主动动态输出反馈鲁棒容错控制器,给出了执行器发生故障时, 系统能保持渐近稳定的充分条件。将控制器设计问题转化为以线性矩阵不等式形式为约束条 件的凸优化问题,进而得出了最优H∞鲁棒容错控制器参数的具体表达式。数值仿真验证了提 出的设计方法的有效性。     

Dynamic output feedback sliding mode control for nonminimum phase linear systems with disturbance attenuation

A sliding mode control algorithm using output information only is developed in this paper for a linear system with mismatched disturbance. The nominal system is allowed to be nonminimum phase. A scheme designed to combine the output‐dependent integral sliding surface with a reduced‐order observer is proposed. Utilizing an H_∞ control analytical technique, once the system is in the sliding mode, the proposed algorithm can guarantee robust stabilization and sustain the nature of performing disturbance attenuation when the solution to one algebraic Riccati inequality can be found. A controller is designed to satisfy the reaching and sliding condition in line with the reduced‐order observer. Finally, a numerical example is explained to show the applicability of the proposed scheme. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Aero‐Engine DCS Fault‐Tolerant Control with Markov Time Delay Based On Augmented Adaptive Sliding Mode Observer

With a focus on aero‐engine distributed control systems (DCSs) with Markov time delay, unknown input disturbance, and sensor and actuator simultaneous faults, a combined fault tolerant algorithm based on the adaptive sliding mode observer is studied. First, an uncertain augmented model of distributed control system is established under the condition of simultaneous sensor and actuator faults, which also considers the influence of the output disturbances. Second, an augmented adaptive sliding mode observer is designed and the linear matrix inequality (LMI) form stability condition of the combined closed‐loop system is deduced. Third, a robust sliding mode fault tolerant controller is designed based on fault estimation of the sliding mode observer, where the theory of predictive control is adopted to suppress the influence of random time delay on system stability. Simulation results indicate that the proposed sliding mode fault tolerant controller can be very effective despite the existence of faults and output disturbances, and is suitable for the simultaneous sensor and actuator faults condition.     

Dynamic observer-based controllers for linear uncertain systems

This paper addresses robust controller design for uncertain linear systems via a dynamic observer-based controller. A dynamic observer is an alternative structure for a classical observer which can be regarded as a general form of a usual observer and has additional degrees of freedom in the observer structure. Using this new observer structure, a new observer-based controller for linear systems is proposed. Some strict linear matrix inequalities (LMIs) have been given to find the dynamic observer parameters and controller gain. It is shown that dynamic observer can be used effectively for tackling the drawbacks of the classical observer-based robust controller design methods. As an advantage, LMIs are derived even in the presence of uncertainties in system, input and output matrices simultaneously, whereas by using the traditional observer, bilinear matrix inequalities (BMIs) are given in the presence of such uncertainties. Moreover, the proposed LMIs do not imply the equality constraint. Simulation results are used to illustrate the effectiveness of the proposed design technique.     

LPV Model-Based Tracking Control and Robust Sensor Fault Diagnosis for a Quadrotor UAV

This work is dedicated to the design of a robust fault detection and tracking controller system for a UAV subject to external disturbances. First, a quadrotor modelled as a Linear Parameter Varying (LPV) system is considered as a target to design and to illustrate the proposed methodologies. In order to perform fault detection and isolation, a robust LPV observer is designed. Sufficient conditions to guarantee asymptotic stability and robustness against disturbance are given by a set of feasible Linear Matrix Inequalities (LMIs). Furthermore, the observer gains are designed with a desired dynamic by considering pole placement based on LMI regions. Then, a fault detection and isolation scheme is considered by mean of an observer bank in order to detect and isolate sensor faults. Second, a feedback controller is designed by considering a comparator integrator control scheme. The goal is to design a robust controller, such that the UAV tracks some reference positions. Finally, some simulations in fault-free and faulty operations are considered on the quadrotor system.     

Time‐varying input delay compensation for nonlinear systems with additive disturbance: An output feedback approach

This paper addresses the output feedback tracking control of a class of multiple‐input and multiple‐output nonlinear systems subject to time‐varying input delay and additive bounded disturbances. Based on the backstepping design approach, an output feedback robust controller is proposed by integrating an extended state observer and a novel robust controller, which uses a desired trajectory‐based feedforward term to achieve an improved model compensation and a robust delay compensation feedback term based on the finite integral of the past control values to compensate for the time‐varying input delay. The extended state observer can simultaneously estimate the unmeasurable system states and the additive disturbances only with the output measurement and delayed control input. The proposed controller theoretically guarantees prescribed transient performance and steady‐state tracking accuracy in spite of the presence of time‐varying input delay and additive bounded disturbances based on Lyapunov stability analysis by using a Lyapunov‐Krasovskii functional. A specific study on a 2‐link robot manipulator is performed; based on the system model and the proposed design procedure, a suitable controller is developed, and comparative simulation results are obtained to demonstrate the effectiveness of the developed control scheme.     

Sampled‐data H∞ control for networked systems with random packet dropouts

This paper is concerned with the H_∞ control problem for networked control systems (NCSs) with random packet dropouts. The NCS is modeled as a sampled‐data system which involves a continuous plant, a digital controller, an event‐driven holder and network channels. In this model, two types of packet dropouts in the sensor‐to‐controller (S/C) side and controller‐to‐actuator (C/A) side are both considered, and are described by two mutually independent stochastic variables satisfying the Bernoulli binary distribution. By applying an input/output delay approach, the sampled‐data NCS is transformed into a continuous time‐delay system with stochastic parameters. An observer‐based control scheme is designed such that the closed‐loop NCS is stochastically exponentially mean‐square stable and the prescribed H_∞ disturbance attenuation level is also achieved. The controller design problem is transformed into a feasibility problem for a set of linear matrix inequalities (LMIs). A numerical example is given to illustrate the effectiveness of the proposed design method. Copyright © 2010 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Output feedback fault-tolerant control for a class of discrete-time fuzzy bilinear systems

This paper studies the fault-tolerant control problem for a class of discrete-time fuzzy bilinear systems with unmeasurable states. A fuzzy detective observer is designed to detect the faults. Based on the fuzzy detective observer, a fuzzy controller is designed by solving a set of linear matrix inequalities (LMIs) to ensure that the closed-loop system without faults is asymptotically stable. For the discrete-time fuzzy bilinear system with faults, a fuzzy adaptive diagnostic observer is designed to estimate the faults by solving a set of LMIs. Then, a fuzzy faulttolerant controller is designed based on the fuzzy diagnostic observer to ensure that the closed-loop system with faults is asymptotically stable. At last, simulation results are presented to verify the effectiveness of the proposed output feedback fault-tolerant control method.     

Performance-Oriented Antiwindup for a Class of Linear Control Systems With Augmented Neural Network Controller

This paper presents a conditioning scheme for a linear control system which is enhanced by a neural network (NN) controller and subjected to a control signal amplitude limit. The NN controller improves the performance of the linear control system by directly estimating an actuator-matched, unmodeled, nonlinear disturbance, in closed-loop, and compensating for it. As disturbances are generally known to be bounded, the nominal NN-control element is modified to keep its output below the disturbance bound. The linear control element is conditioned by an antiwindup (AW) compensator which ensures performance close to the nominal controller and swift recovery from saturation. For this, the AW compensator proposed is of low order, designed using convex linear matrix inequalities (LMIs) optimization     

非均匀采样数据系统时变故障估计与调节最优集成设计

针对一类发生连续时变故障的非均匀采样数据系统,建立了一套主动容错控制最优设计方案. 首先,为了实现基于非均匀离散采样输出对连续故障的估计,同时鉴于现有自适应故障诊断方法无法直接推广于非均匀采样数据系统,提出一种连续时间增广观测器最优设计方法,既能保证故障估计误差快速收敛同时又对外界干扰鲁棒;并且提出一个迭代算法对故障估计延迟与系统鲁棒性进行权衡;进一步地,基于所获得的故障信息,并考虑估计误差和时变故障内采样特性对容错控制带来的不利因素,设计基于状态反馈的非均匀采样容错控制器来快速恢复故障系统性能;最后,通过对四容水箱基准实例的仿真来验证所提方法的有效性.     

时变时滞不确定系统的鲁棒输出反馈控制

研究了时变时滞不确定系统基于状态观测器的动态输出反馈实现鲁棒镇定的分 析和综合问题.所研究的系统不仅同时包含时变状态时滞和时变控制时滞,而且包含时变未 知且有界不确定参数.提出了确保该系统可通过输出反馈鲁棒镇定的充分条件,并将该充分 条件转化为线性矩阵不等式(LMI)问题,最终通过求解两个LMI来构造输出反馈控制律.     

带有干扰观测器的高超声速飞行器滑模控制

针对高超声速飞行器非线性和易受干扰影响的特点,提出了带有扩张状态干扰观测器的连续滑模控制方法.在对飞行器非线性模型做线性化处理的基础上,设计了一种连续时间滑模控制器.该控制器在对不确定性和未知动态保持鲁棒性的基础上,消除了传统滑模中存在的抖振现象.对系统中存在的外加干扰,设计了扩张状态干扰观测器.将外加干扰作为系统的一个状态变量被估计出来,再将估计值用作滑模控制器的补偿量,进而达到消除外干扰的目的.在高超声速飞行器巡航飞行状态的基础上进行了仿真.仿真结果表明,所提出的方案能够满足控制要求.     

具有时滞的积分和不稳定对象的鲁棒控制

针对含时滞的积分和不稳定对象提出了一种新颖的两自由度控制结构,首先用一个比例控制器镇定给定值响应,然后基于鲁棒H₂最优性能指标设计给定值跟踪控制器.根据实际运行抗干扰要求,在对象输入和输出端之间设计负载扰动抑制闭环,利用扰动观测器抑制负载干扰信号,通过提出期望的闭环余灵敏度函数来确定扰动观测器,同时给出了扰动抑制闭环保证鲁棒稳定性的充要条件.最后通过仿真实例验证了该方法相对于近期其它方法的优越性.     

基于线性自抗扰的开关磁阻电机调速控制研究

开关磁阻电机调速系统是复杂的非线性时变系统,负载扰动大,变量之间耦合严重,针对上述系统的性能特点提出采用线性自抗扰控制策略对系统进行控制的方法。首先为克服负载扰动变化,电机磁链呈非线性以及电流、位置等参数耦合的内外部干扰问题,设计扩张状态观测器对系统内扰和外扰进行准确估计并实时补偿。然后设计PD（比例-微分）控制器抑制系统给定与扩张状态观测器反馈的观测对象状态变量之间的跟踪误差。最后在仿真平台上对设计的控制系统进行试验并与传统PID控制方案进行对比,结果显示,对于给定的阶跃信号线性自抗扰控制器只需0.09s即可达到稳态且无超调,而PID控制器需要3s才能实现稳定跟踪。因此相比于传统PID控制,线性自抗扰控制器拥有更优的动静态性能,并且系统在外部负载扰动和内部模型参数变化的情况下也有良好的控制效果,表现出了很好的鲁棒特性。     

基于观测器的时滞系统鲁棒控制器设计

对于具有状态时滞的一类线性不确定系统 ,用线性矩阵不等式方法研究了基于观测器的鲁棒控制器的存在条件以及设计方法。该方法通过求解两个线性矩阵不等式来实现 ,所给示例说明了本文方法的有效性。     

输出约束的有限时间自适应区间二型模糊输出反馈PMSM伺服控制

针对永磁同步电机驱动的伺服系统在不确定性摩擦和未知负载的影响下难以达到高精度的控制效果,提出一种基于区间二型模糊系统的带有输出约束的有限时间自适应输出反馈控制方案.首先,构建一个基于非线性扰动观测器的区间二型模糊状态观测器,分别完成对于未知扰动和速度的估计,区间二型模糊系统完成对于非线性摩擦的逼近;然后,在此基础上,结合滤波误差补偿机制和有限时间技术,引入障碍Lyapunov函数和反步控制技术设计输出约束的自适应区间二型模糊输出反馈控制器;最后,根据Lyapunov稳定性理论提出严格的稳定性分析,保证闭环系统的所有信号均是有限时间内有界的,并通过数值仿真和实验验证了所提出方法的有效性.     

基于干扰观测器的一类不确定非线性系统鲁棒H∞控制

为了降低控制器对干扰的要求,基于干扰观测器提出一类多输入多输出不确定非线性系统的鲁棒H∞控制方法．将系统的内部不确定性和外部干扰组成复合干扰,设计基于小波神经网络的复合干扰观测器,并提出干扰观测器的参数调节方案使观测器能以高精度逼近复合干扰．同时在控制器中引入鲁棒控制项用来抑制观测器误差给系统带来的影响,所设计的控制器能使系统的跟踪误差小于一个给定的性能指标．最后给出一个仿真算例验证了本控制方案的有效性．