OFDM系统中子信道联合预编码技术的信号检测算法研究

正交频分复用技术将多径衰落信道划分为多个相对平坦的子信道,使得接收机在信道估计等恢复技术上复杂度大大降低。OFDM系统采用子信道联合预编码技术能有效解决由于成片子载波衰落引起的数据丢失问题。由于独立信道的线性预编码技术在发送端不需要信道反馈信息,因此降低了发送设备复杂度,减少了系统延时,该编码方案适用于从用户端到基站的数据传输。通过理论分析推导了当系统采用独立信道的线性预编码技术时,接收端不能采用迫零均衡(ZF)的线性检测算法,实验仿真表明,当采用迫零均衡检测算法时,当且仅当预编码矩阵为酉矩阵时系统能达到未经预编码系统的性能。     

一种新的快衰落信道频域跟踪算法

该文研究了第三代移动通信系统中用户移动速度在150km/h以上时,无线信道的快衰落特性,并且在3GPP系统的协议框架下提出了一种新的基于频域的信道跟踪方法(FBP),利用快衰落信道频域上的相对稳定性,解决了由于信道参数变化的速度超过自适应算法收敛速度,而造成的在时域上无法进行信道跟踪的问题,文章给出了该算法的模拟结果,并与另一种对衰落信道的参数进行基于小波的信道跟踪算法(WBP)进行了比较,该文提出的算法具有更好的性能和更低的算法复杂度。     

在空间相关Rice信道下的一种基于非码本的预编码方法在LTE下行系统中的应用

本文所提出的预编码生成方法适合在TD-LTE系统中工作，包括基于信道互易性获取信道状态信息模块，能量分配模块，波束形成模块。该方法充分利用了TDD系统的信道互易性特性，获取下行信道的信道状态信息，并使用基于非码本的预编码方式来增强传输的抗干扰性能，提升小区覆盖范围。与单纯考虑无视距LOS（Line-Of-Sight）分量的衰落信道不同，本文所提出的是在接收端天线之间存在空间相关的下行MIMO系统中，针对拥有LOS分量的莱斯（Rice）信道发射机的预编码设计方案。该方案可以保证非码本预编码算法的快速收敛，且保持较低的计算复杂度。     

一种抗飞行器衰落的快速均衡算法

对流层散射通信信道为时变多径信道,当飞行器飞越散射通信链路会导致飞行器衰落。针对飞行器衰落,提出了一种收敛速度快、跟踪能力强、数值稳定性高、复杂度低的快速自适应均衡算法——基于选择更新的累积误差递归最小二乘自适应均衡算法。根据指数加权最小二乘准则,推导出累积误差递归最小二乘算法,依据共轭斜量算法提出抽头系数选择更新准则。均衡算法的复杂度分析和仿真实验表明提出的快速自适应均衡算法不仅复杂度低,而且有效地提高了均衡器克服信道时间衰落的能力。     

MIMO系统在慢衰落信道中的实用反馈方案

提出了一种可变码长编码方式,其应用于慢衰落信道中的基于有限反馈迫零预编码的多用户MIMO系统.该方案利用了慢衰落信道中每个配置单天线的用户连续两次从码本中选择的量化信道矢量的相关性来对码本进行有效编码,从而减少了需反馈的统计平均比特数,节省了信道带宽.在满足一定条件的慢衰落信道中,在需要反馈的比特数相同的情况下,新方案比应用基于量化的天线合并算法每用户多天线的多用户MIMO系统在信道总容量方面具有更好的性能,且该编码对应于二叉树形结构的叶子,故基站可自动识别其编码,可用于实际的通信系统之中.     

快速的ZP-OFDM系统中的盲信道估计算法

基于子空间的盲信道估计因为其节约带宽和发射功率成为OFDM系统中比较热门的研究领域。但是,之前很多子空间算法有的收敛速度快,计算复杂度却高,有的用迭代算法跟踪子空间的特征结构,复杂度较低,但收敛速度却比较慢。提出了一种基于快速收敛的LMS-Newton算法的ZP-OFDM系统的信道估计方法,既提高了收敛速度,计算复杂度又不是很高。借助于子空间跟踪,该算法可以自适应地估计信道相关矩阵的噪声子空间,从而估计OFDM系统信道。仿真结果表明该算法可以改善信道估计的性能。     

一种改进的单音干扰下OFDM系统盲信道估计算法

在相关检测的OFDM系统中,信道估计具有十分重要的意义。研究了一种在单音干扰环境下的OFDM系统中基于预编码的盲信道估计方案。利用接收的干扰信号的频域信息对单音干扰信号进行准确估计与重构,有效地消除了干扰信号的影响,提高了单音干扰下盲信道估计的准确性。与其他盲信道估计算法相比,基于预编码的盲信道估计算法具有较低的运算复杂度以及较快的收敛速度。仿真结果表明了该算法在干扰估计以及信道估计两方面都取得了较好的性能。     

基于导频的发射分集OFDM系统的子空间跟踪信道估计

由于发射分集技术可以大大提高系统的抗衰落性能,因此得到了广泛的研究和应用。该文提出了3种基于导频的发射分集正交频分复用(OFDM)系统的子空间幅度跟踪信道估计方法,并分析比较了其估计性能。利用信道传播时延慢变和衰落幅度快变的特点,通过对多径信道的时延子空间和衰落幅度的跟踪,可以部分消除信道估计过程中噪声的影响,大大提高信道估计精度。在信道阶数已知或使用相同秩估计方法的情况下,第3种方法的运算复杂度最低, 性能最好;第1种方法次之,性能最差;第2种方法由于需要进行DFT和IDFT,运算复杂度最高。仿真结果表明,3种子空间幅度跟踪信道估计方法在410-3 误码率时可以提高系统误码率性能1～2 dB左右。     

一种多输入多输出系统中有限反馈预编码的自适应跟踪测度

该文提出一种新的适用于无线相关信道中有限反馈预编码多输入多输出系统的预编码矩阵自适应跟踪测度。由于该测度在统计意义下对信道的相关性与预编码矩阵变化的关系具有更优化的描述,所以基于该测度的方案在保持较低反馈信息量的前提下,能够进一步改善预编码系统性能。文中给出优化自适应跟踪测度的理论推导。系统仿真分别针对无线信道的频域相关和时域相关,并结合空间分集和空间复用两类系统结构予以讨论,并验证了理论分析结果。另外,由于该测度方案算法复杂度更低,所以更具工程实用价值。     

LTE-A系统中预编码矩阵选择算法研究

该文是对第三代移动通信系统长期演进(3G LTE)及其增强版本(LTEAdvanced)下基于码本的MIMO预编码算法进行了研究。传统预编码算法可通过SVD分解获得,而该算法需要获知完整的信道状态信息,它的实现复杂度极高,因此该文在仿真SVD算法的基础上,对基于方程求解特征值获得预编码索引的方法和最大等效信道矩阵选择算法进行了研究,这两种算法在性能上较SVD算法没有损失甚至更优,但复杂度明显降低,基于EPA5、ETU70信道类型进行仿真,仿真结果验证了算法性能。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

A rigorous proof of MIMO channel capacity’s increase with antenna number

It is well known that adding more antennas at the transmitter or at the receiver may offer larger channel capacity in the multiple-input multiple-output（MIMO） communication systems. In this letter, a simple proof is presented for the fact that the channel capacity increases with an increase in the number of receiving antennas. The proof is based on the famous capacity formula of Foschini and Gans with matrix theory.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks