大型民用飞机自动刹车控制系统研究

为了满足大型民用飞机对乘客舒适度和安全性日益增涨的需求,介绍了一种适用于大型民用飞机的自动刹车控制系统。文中分析了系统的工作原理以及系统架构和方案。同时研究了基于恒减速率的控制律,提出了系统的控制逻辑,并对控制逻辑进行设计,通过利用Stateflow工具建立控制逻辑模型,并进行了仿真。全数字和半物理仿真结果均满足系统设计要求,达到了预期的研究目标。     

基于Saleh函数的功放行为模型研究

如何精确地模型功率放大器以及模型的适用情况是系统仿真时重要的研究方面.文中在原始Saleh模型的基础上,提出了基于Saleh函数的无记忆和有记忆的非线性功放模型.利用Freescale半导体晶体管MRF21030器件模型及设计的电路从ADS中导出输入输出数据,对两种模型进行了仿真实现,得出了归一化均方根误差,并和多项式模型误差进行比较.结果表明,该模型简化了原Saleh模型的结构和减少了系数,能够精确描述功率放大器的非线性和记忆效应,适用于弱非线性系统电路中.     

基于GPRS的油井监控系统

简述了GPRS无线业务特点及其工作原理,然后重点讲述了基于GPRS的油井监控系统的组成、原理以及软硬件设计。实践证明GPRS技术非常适用于要求实时性的、大数据量传送的应用场合。     

基于仿射变换模型的图像跟踪系统的实现

文中设计研制了一种新型的基于仿射变换模型的实时图像跟踪系统。本跟踪系统已经通过实践检验,能够稳定的、准确的、快速的跟踪目标。并且系统有很大的升级潜力,除了能够满足仿射变换跟踪的要求之外,还能适用于其他的一些算法,构成鲁棒性更强的图像跟踪系统。实践证明该跟踪系统性能优于经典的相关跟踪系统。     

闭环数字输出D类放大器

闭环架构通过放宽电源性能要求,带来更丰富、更精准的语音效果与更低系统成本。高灵活度输出配置配合直观支持工具,能够帮助高清电视制造商简化设计工作,适用于LED、等离子以及DLP电视以及媒体扩展应用。     

基于多信号模型的综合化航电系统综合诊断算法设计

针对现代航电系统综合化程度高、故障现象复杂多变、故障诊断能力不足的现状,分析了综合化航电系统的故障特征,总结了其故障诊断算法的设计要求,并在此基础上设计了基于多信号模型的故障综合诊断算法,具体包括:建立了算法的总体架构,针对机上LRU/LRM级、子系统级和系统级诊断以及在线诊断的特点分别设计了适用的诊断算法模块,特别针对子系统与系统级诊断,设计了防虚警处理算法、快速诊断算法和精确诊断算法,以解决航电系统机内测试设备(BITE)长期存在的虚警难题,满足不同BIT工作模式下故障诊断的要求;建立了多层次诊断架构下的综合诊断流程,规划了各诊断模块的组成、功能、工作原理和输入输出数据。梳理了综合诊断算法设计的工作项目及其接口关系,给出了航电系统集成研发模式下综合诊断算法的设计流程,为工业部门在研制阶段进行航电系统综合诊断算法的设计开发提供支持。     

小型化频率综合器技术分析

依据频率综合器的设计原理,运用ADIsimPLL软件设计电路的相关参数,在软件平台中进行建模及初步电路仿真.借鉴以往经验选择关键参量进行优化设计,得出了符合指标要求的频率综合器设计模型及环路参数,并根据该设计模型及相应的环路参数进行了产品加工及性能测试.性能测试分析表明,采用该频率综合器设计原理设计的频率综合器具有相位噪声指标高、调试简单、尺寸小等特点,完全适用于系统及工程应用.     

基于Web的通辽职业学院教务管理系统设计与实现

本文采用流行的MVC设计模型并运用Struts应用框架设计了适用于通辽职业学院的教务管理系统平台,实现了原型系统并达到了预期设计目标和功能。通过本系统的建设以对提高学院教务管理水平有所帮助。     

通用雷达杂波仿真系统的设计与实现

以雷达电子战系统仿真与评估为应用背景,基于信号级建模仿真方法和通用化、模块化设计思想,构建了适用于多种雷达电子战系统仿真应用的通用雷达杂波仿真系统,介绍了系统的设计与实现方法,给出了其中的关键仿真模型。该系统能够对固定平台和运动平台下雷达所接收的地/海杂波以及气象杂波进行信号级模拟。最后给出了仿真结果,验证了该系统的有效性。     

某型飞机机载武器管理仿真系统

针对某型飞机机载武器管理系统(SMS)的训练需要,将建模与仿真技术引入武器管理系统的研究,提出了基于HLA(High Level Architecture)的武器管理仿真系统,开发相应模拟器;利用HLA的互操作性与重用性特点,结合该机武器管理仿真系统的设计要求,根据仿真应用系统的开发过程,给出了该系统总体设计方案和设计要求;依据HLA/RTI规范,设计开发了仿真联邦的联邦对象模型和仿真对象模型,列出了具体的对象类和交互类以及公布和订购关系,给出了系统的仿真主流程图。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

A rigorous proof of MIMO channel capacity’s increase with antenna number

It is well known that adding more antennas at the transmitter or at the receiver may offer larger channel capacity in the multiple-input multiple-output（MIMO） communication systems. In this letter, a simple proof is presented for the fact that the channel capacity increases with an increase in the number of receiving antennas. The proof is based on the famous capacity formula of Foschini and Gans with matrix theory.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks