One-pot synthesis of bifunctionalized TiO<Subscript>2</Subscript> mesoporous photocatalyst with visible light response

A series of Fe-doped SH/TiO₂ mesoporous photocatalysts have been firstly prepared by one-pot method using P123 as structure-directing agent. This bifunctionalized mesoporous TiO₂ possesses perfect anatase crystal structure and high surface area. The surface area of Fe-doped SH/TiO₂ mesoporous material is 4 times higher than that of P25. Based on the EPR results, it was found that trivalent Fe ions exist at low spin state and substitutes a part of Ti⁴⁺ ions into TiO₂ lattice. Fe-dropping in TiO₂ extends the adsorption band side of the resulting material to about 600 nm. Much high photocatalytic activity in the degradation of phenanthrene was obtained on the bifunctionalized mesoporous TiO₂ under visible light irradiation (λ > 420 nm), which is 6 times higher than that of pristine mesoporous TiO₂. The enhancement in the photocatalytic activity of bifunctionalized TiO₂ is ascribed to the extended absorption to visible light and strong interaction between SH-groups and PHE molecules.     

High-throughput screening of transition metal-doped TiO<Subscript>2</Subscript> in photodecomposition of phenol under visible light

A catalyst library consisting of 20 catalysts with different metal and weight fraction-doped TiO₂ was prepared at one time for discovering the novel metal-doped TiO₂ photocatalyst, which is active under visible light irradiation. Combinatorial microbeam XRD and UV-vis spectrometer were used for analysis of crystal structure and photoactivity of 20 catalysts in the library, respectively. Photodecomposition of phenol was chosen as a probe reaction. The library preparation, XRD characterization and reaction test for 20 catalysts were completed within 48 hours. Among the catalysts in the library, 1.5 wt% Co/TiO₂ showed the best activity for phenol degradation. This paper is dedicated to Professor Hyun-Ku Rhee on the occasion of his retirement from Seoul National University.     

Effect of CdS contents on H<Subscript>2</Subscript> production from Pt-(CdS/TiO<Subscript>2</Subscript>) film-typed photocatalysts

Pt-(CdS/TiO₂) film-typed photocatalysts are prepared with a doctor-blade method followed by a chemical bath deposition (CBD) process, and the films are characterized by UV-vis spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy. The film-typed structure is composed of photocatalysts and Pt metal part on a FTO substrate without additional electric device, so it is relatively simpler than the conventional photoelectrochemical cell. CdS quantum dots are introduced as a sensitizer for visible light response. Amounts of CdS quantum dots on TiO₂ surface are increased with increasing CBD cycles, but they start to aggregate after certain CdS concentration due to oversaturation phenomenon. This high CdS content induces high electron losses, and therefore it reduces amounts of hydrogen production. As a result, there is a saturation point of CdS content at Cd/Ti ratio of 0.197, and the amounts of evolved hydrogen are 5.407 μmol/cm²·h at this photocatalyst formulation.     

Facile synthesis of TiO<Subscript>2</Subscript>/ZnFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanocomposite by sol-gel auto combustion method for superior visible light photocatalytic efficiency

Photocatalytic composite materials having photon absorption capability in the range of visible light were synthesized by loading TiO₂ (5, 10, 15, and 20 wt%) on ferrite nanocomposites by sol-gel auto-combustion method. The synthesized nanocomposites were analyzed using X-ray diffraction, Transmission electron microscopy, diffuse reflectance spectroscopy and N₂ adsorption techniques. The generation of photo active hydroxyl radicals for all the synthesized composites was found higher under the irradiation of red LED (RLED irradiation) which was confirmed by degradation of rhodamine B dye under irradiation of RLED. Photocatalytic activity of the synthesized nanocomposites was also carried out under irradiation of ultraviolet (UVLED) and blue (BLED) light emitting diodes, which is comparatively less than for the reaction under red LED irradiation. The operational parameters like catalyst amount, pH and concentration of dye solution were studied and ESI-MS degradation pathway is proposed by analyzing the degraded samples.     

Phase evolution during mechanochemical coreduction of V<Subscript>2</Subscript>O<Subscript>5</Subscript> and TiO<Subscript>2</Subscript> with A

The direct preparation of V-Ti solid solution alloy by coreduction of V₂O₅ and TiO₂ with Al in an attritor mill was investigated. The reduction of V₂O₅ with Al is highly exothermic, whereas reduction of TiO₂ with Al is not sufficiently exothermic for a self-sustaining reaction. A range of compositions of a mixture of V₂O₅ and TiO₂ can be so chosen as to make the overall reduction of V₂O₅ and TiO₂ with Al sufficiently exothermic for a self-sustaining reaction. Initial studies were done to identify the reaction products obtained by reducing V₂O₅ with Al. The reaction yielded the intermetallic phase (Al₃V), V, and Al₂O₃. SEM images indicated melting and solidification of the phases, leading to agglomeration. Further experiments involved mixing appropriate amounts of TiO₂ with V₂O₅ and reducing the mixture with Al. XRD data for products showed the presence of V, V₅Al₈, and Al₂O₃. X-Ray Florescence (XRF) analysis and energy dispersive analyzer (EDAX) of SEM sample images indicated the formation of V-Ti solid solution. Microstructure of the milled charges taken out prior to reaction initiation indicated morphology change in Al powder and agglomeration/segregation of reactants. As a result, the reaction of V₂O₅ with the excess Al at certain regions also promoted the formation of vanadium aluminide.     

Enhancement of the photoelectric performance of dye-sensitized solar cells using Ag-doped TiO<Subscript>2</Subscript> nanofibers in a TiO<Subscript>2</Subscript> film as electrode

For high solar conversion efficiency of dye-sensitized solar cells [DSSCs], TiO₂ nanofiber [TN] and Ag-doped TiO₂ nanofiber [ATN] have been extended to be included in TiO₂ films to increase the amount of dye loading for a higher short-circuit current. The ATN was used on affected DSSCs to increase the open circuit voltage. This process had enhanced the exit in dye molecules which were rapidly split into electrons, and the DSSCs with ATN stop the recombination of the electronic process. The conversion efficiency of TiO₂ photoelectrode-based DSSCs was 4.74%; it was increased to 6.13% after adding 5 wt.% ATN into TiO₂ films. The electron lifetime of DSSCs with ATN increased from 0.29 to 0.34 s and that electron recombination was reduced.     

Effect of La as Promoter in the Photoreduction of CO<Subscript>2</Subscript> Over TiO<Subscript>2</Subscript> Catalysts

In this work, TiO₂ has been modified by treating it thermally together with different proportions (0.5–15 wt%) of La₂O₃. The resulting materials have been extensively characterized by XRD, TEM, N₂ adsorption isotherms, temperature-programmed CO₂ desorption, Raman, UV–Vis photoluminescence and X-ray photoelectron spectroscopies. The activity tests of these materials for the gas-phase photocatalytic reduction of carbon dioxide show that the main products of the reaction are in all cases CO and CH₄, together with H₂ from the parallel reduction of water. After the preparation procedure, La phases are best described as oxycarbonates, and lead to improved activity with respect to TiO₂ with La contents up to 5 wt%. Higher loadings do not, however, lead to further enhanced activity. Retarded electron–hole recombination and enhanced CO₂ adsorption are invoked as the key factors contributing to this activity improvement, which is optimized in the case of 0.5 wt% La leading to higher productions of CO and CH₄ and increased quantum efficiency with respect to titania.     

Effect of TiO<Subscript>2</Subscript> loading on the activity of V/TiO<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> in the catalytic oxidehydrogenation of ethylbenzene with carbon dioxide

TiO₂-Al₂O₃ mixed oxides with different compositions ranging from 40wt-% to 95wt-% of TiO₂ were prepared by sol-gel method and impregnated with different amounts of VO _x . Supports and catalysts were characterized by X-ray diffraction (XRD), physisorption, temperature preprogrammed reduction (H₂-TPR), and ammonia temperature programmed desorption (NH₃-TPD). TiO₂ content in the support had obvious effect on the crystal structure, texture characteristic, acid property, and catalytic activity in dehydrogenation of ethylbenzene (EB) with carbon dioxide. The highest catalytic activity was acquired when the TiO₂ content was 50 wt-%.     

Dye sensitized CO<Subscript>2</Subscript> reduction over pure and platinized TiO<Subscript>2</Subscript>

TiO₂ thin and thick films promoted with platinum and organic sensitizers including novel perylene diimide dyes (PDI) were prepared and tested for carbon dioxide reduction with water under visible light. TiO₂ films were prepared by a dip coating sol–gel technique. Pt was incorporated on TiO₂ surface by wet impregnation [Pt(on).TiO₂], or in the TiO₂ film [Pt(in).TiO₂] by adding the precursor in the sol. When tris (2,2′-bipyridyl) ruthenium(II) chloride hexahydrate was used as sensitizer, in addition to visible light activity towards methane production, H₂ evolution was also observed. Perylene diimide derivatives used in this study have shown light harvesting capability similar to the tris (2,2′-bipyridyl) ruthenium(II) chloride hexahydrate.     

Degradation kinetics of recalcitrant organic compounds in a decontamination process with UV/H<Subscript>2</Subscript>O<Subscript>2</Subscript> and UV/H<Subscript>2</Subscript>O<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> processes

In this study, degradation aspects and kinetics of organics in a decontamination process were considered in the degradation experiments of advanced oxidation processes (AOP),i.e., UV, UV/H₂O, and UV/H₂O,/TiO₂ systems. In the oxalic acid degradation with different H₂O₂ concentrations, it was found that oxalic acid was degraded with the first order reaction and the highest degradation rate was observed at 0.1 M of hydrogen peroxide. Degradation rate of oxalic acid was much higher than that of citric acid, irrespective of degradation methods, assuming that degradation aspects are related to chemical structures. Of methods, the TiO₂ mediated photocatalysis showed the highest rate constant for oxalic acid and citric acid degradation. It was clearly showed that advanced oxidation processes were effective means to degrade recalcitrant organic compounds existing in a decontamination process.     

Adsorption of thallium cations on RuO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript> electrodes

The electrochemical ion-exchange properties of RuO₂–TiO₂ film electrodes with different composition have been studied in acidic and alkaline media. Thallium-cation uptake has been observed only from the latter and its extent was found to be a function of electrode potential and composition. At potentials near 0.0 V (RHE), the amount of adsorbed Tl⁺ exhibited a maximum, and decreased with increasing potential, reaching a broad minimum in the range 0.4–0.8 V. A further increase in the electrode potential, above about 1.0 V, led to an increase of adsorbed thallium species, essentially due to deposition of a few layers of Tl(III) hydroxide. In fact, the release of the latter species was found to be much slower than that of thallium ions adsorbed at 0.0 V. For the latter, in turn, the double injection/ejection mechanism, currently accepted to explain the charge-storage in oxide electrodes, seems to be confirmed. The high Γ values attained at 0.0 V indicate that the large ionic radius of Tl⁺ does not prevent its diffusion through the thinner pore texture of the oxide coatings, possibly because of its poor hydration, related with lower charge density at the ion surfaces.     

Ni<Superscript>2+</Superscript> reduction under solar irradiation over CuFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/TiO<Subscript>2</Subscript> catalysts

The photo-electrochemical characterization of the hetero-system CoFe₂O₄/TiO₂ was undertaken for the Ni²⁺ reduction under solar light. The spinel CoFe₂O₄ was prepared by nitrate route at 940 °C and the optical gap (1.66 eV) was well matched to the sun spectrum. The flat band potential (-0.21 V_SCE) is more cathodic than the potential of Ni²⁺/Ni couple (-0.6 V_SCE), thus leading to a feasible nickel photoreduction. TiO₂ with a gap of 3.2 eV is used to mediate the electrons transfer. The reaction is achieved in batch configuration and is optimized with respect to Ni²⁺ concentration (30 ppm); a reduction percentage of 72% is obtained under sunlight, the Ni²⁺ reduction is strongly enhanced and follows a first order kinetic with a rate constant of 4.6×10^-2 min^-1 according to the Langmuir-Hinshelwood model.     

Li<Subscript>2</Subscript>Cu<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> + SiO<Subscript>2</Subscript>/Ti compositions for the catalytic afterburning of diesel soot

Two methods were used to obtain a catalytically active oxide coating on the surface of titanium for the catalytic afterburning of diesel soot: plasma electrochemical formation of an oxide film on the surface of titanium and extraction pyrolytic deposition of the Li₂Cu₂(MoO₄)₃ compound. The Li₂Cu₂(MoO₄)₃/TiO₂ + SiO₂/Ti compositions synthesized by the single-step extraction pyrolytic treatment of the oxidized surface of titanium ensured a high burning rate of soot of ∼300°C. The subsequent deposition of Li₂Cu₂(MoO₄)₃ lowers the activity of the catalyst, due probably to the growth of molybdate phase crystallites and the filling of open oxide film pores. Double lithium-copper molybdate is able to reduce appreciably the concentration of CO in the oxidation products of soot. The advantages of these methods are the possibility of forming high-cohesion durable coatings on surfaces of any complexity, the simplicity of their implementation, and high productivity and low cost. The obtained results can be recommended for use in developing methods for creating composite coatings on catalytic soot filters.     

Combustion of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>/TiO<Subscript>2</Subscript>/Al thermit mixtures in steel tubes

Explored was the combustion of Fe₂O₃/TiO₂/Al thermit mixtures in steel tubes upon variation in green composition and with special emphasis on the dependence of combustion temperature T _c and burning velocity U on reaction heat Q. Special attention was given to incompleteness of combustion for compositions with low Q.     

Preparation of hydrophobic SiO<Subscript>2</Subscript>@(TiO<Subscript>2</Subscript>/MoS<Subscript>2</Subscript>) composite film and its self-cleaning properties

TiO₂/MoS₂ composite was encapsulated by hydrophobic SiO₂ nanoparticles using a sol–gel hydrothermal method with methyltriethoxysilane (MTES), titanium tetrachloride (TiCl₄), and molybdenum disulfide (MoS₂) as raw materials. Then, a novel dual functional composite film with hydrophobicity and photocatalytic activity was fabricated on a glass substrates via the combination of polydimethylsiloxane adhesives and hydrophobic SiO₂@(TiO₂/MoS₂) composite particles. The influence of the mole ratios of MTES to TiO₂/MoS₂ (M:T) on the wettability and photocatalytic activity of the composite film was discussed. The surface morphology, chemical compositions, and hydrophobicity of the composite film on the glass substrate were investigated by scanning electron microscopy, transmission electron microscopy, X-ray powder diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and water contact angle (water CA) measurements. The results indicated that the composite film exhibited stable superhydrophobicity and excellent photocatalytic activity for degradation of methyl orange (MO) even after five continuous cycles of photocatalytic reaction when M/T was 7:1. The water CA and degradation efficiency for MO remained at 154° and 94%, respectively. Further, the composite film showed a good non-sticking characteristic with the water sliding angle (SA) at about 4°. The SiO₂@(TiO₂/MoS₂) composite consisting of hydrophobic SiO₂ nanoparticles and TiO₂/MoS₂ heterostructure could provide synergistic effects for maintaining long-term self-cleaning performance.     

Some characteristics of heat-resisting concretes modified by SiO<Subscript>2</Subscript> and TiO<Subscript>2</Subscript> nanoparticles

Nanoparticles of SiO₂ or TiO₂ have been added in the preparation of heat-resisting concretes of two types. The major technical and chemical characteristics have been determined. Features have been found in some of the technological operations in making the concretes of both types, and also aspects of the physicomechanical properties. Higher chemical stability has been found for heat-resisting concrete containing TiO₂ nanoparticles in an NaOH solution.     

Preparation of TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> composite oxide and its photocatalytic degradation of rhodamine B

The composite semiconductor photocatalyst TiO₂/SiO₂ was prepared by template-hydrothermal method using carbon spheres as the template. The structural and optical properties of TiO₂/SiO₂ were characterized by XRD, SEM, BET, UV–Vis DRS, TG-DTA, PL techniques. The formation of hydroxyl radical on the surface of TiO₂/SiO₂ was studied with terephthalic acid as the probe molecule, combined with fluorescence technique. The results showed that the specific surface area of TiO₂/SiO₂ composite was 327.9 m²/g, and the specific surface area of TiO₂/SiO₂ was larger than that of pure TiO₂. Photocatalytic degradation of rhodamine B showed that TiO₂/SiO₂ composite oxide under visible light illumination 40 min, the degradation rate was 98.6 % and the degradation rate of pure TiO₂ was only 11.9 %. The apparent first-order rate constant of TiO₂/SiO₂ was 33 times that of pure TiO₂ and more than 6 times that of P25 when the molar ratio of Ti to Si was 1:1 under visible light irradiation. Moreover, it’s also as much as 5 times that of pure TiO₂ and is more than 1 times that of P25 under UV light irradiation 25 min. Based on the experimental results, ^·O₂ ^? and h⁺ were suggested to be the major active species which was responsible for the degradation reaction. The increased photocatalytic activity of TiO₂/SiO₂ may be mainly attributed to effectively suppressing the recombination of hole/electron pairs. After the photocatalyst TiO₂/SiO₂ was reused 5 times, the degradation rate of rhodamine B could reach 89.2 % under visible light irradiation. Moreover, The composite semiconductor photocatalyst TiO₂/SiO₂ was selective towards the degradation of rhodamine B.