Preparation of poly(acrylamide‐co‐acrylic acid)/silica nanocomposite microspheres and their performance as a plugging material for deep profile control

In this work, poly(acrylamide‐co‐acrylic acid)/silica [poly(AM‐co‐AA)/SiO₂] microspheres were prepared by inverse phase suspension polymerization in the presence of γ‐3‐(trimethoxysilyl) propyl methacrylate (or 3‐methacryloxypropyltrimethoxysilane) modified SiO₂. The effects of SiO₂ nanoparticles on tuning morphology and properties of the nanocomposite microspheres were studied. Plugging ability and oil displacement performance were also systematically investigated by single‐ and double‐tube sand pack models. The results showed that SiO₂ nanoparticles can effectively adjust surface smoothness, swelling behavior, and thermal stability of the nanocomposite microspheres. Compared with pure copolymer microspheres, these nanocomposite microspheres also displayed better salt tolerance and shear resistance. Such multifunctional nanocomposite microspheres can provide effective plugging in the high‐permeability channels and can also achieve deep profile control. The highest plugging rate can be 86.11% and the oil recovery for low‐permeability tube was enhanced by 19.69%. This research will provide a candidate material for the further enhanced oil recovery (EOR) research and supply the theoretical support for profile control system in field application. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45502.     

Syntheses,characterization, and antibacterial activity of chitosan grafted hydrogels and associated mica‐containing nanocomposite hydrogels

Chitosan (CS) grafted poly[(acrylic acid)‐co‐(2‐hydroxyethyl methacrylate)] (CS‐g‐poly(AA‐co‐HEMA)) at different molar ratios of AA and HEMA, and the associated nanocomposite hydrogels of CS‐g‐poly(AA‐co‐HEMA)/mica were synthesized by radical copolymerization. The grafting positions at the amino or hydroxyl groups in the CS were identified by Fourier transform infrared spectroscopy. CS‐g‐poly(AA‐co‐HEMA) hydrogels were intercalated in the mica and the amount of hydrogel insertion did not affect the spacing of the silicate layers in mica. The higher mica loadings produced a rougher surface of the nanocomposite hydrogel. The water absorbency of the CS‐g‐poly(AA‐co‐HEMA)/mica nanocomposite hydrogels decreased with increasing levels of mica loading to a lower level than those of the CS‐g‐poly(AA‐co‐HEMA) hydrogels. Both CS‐g‐poly(AA) and CS‐g‐poly(AA‐co‐HEMA)/mica nanocomposite hydrogels exhibited a higher antiproliferative activity against Staphylococcus aureus than did the neat CS hydrogel with CS‐g‐poly(AA) revealing a very pronounced minimum inhibition concentration (MIC) of 1.56 mg mL^?1. The extent of mica loading in the CS‐g‐poly(AA‐co‐HEMA) nanocomposite hydrogels did not affect the MIC (12.5 mg mL^?1). © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

An improved phase‐inversion process for the preparation of silica/poly[styrene‐co‐(acrylic acid)] core–shell microspheres: synthesis and application in the field of polyolefin catalysis

Spherical and well‐dispersed silica/poly[styrene‐co‐(acrylic acid)] (SiO₂/PSA) core–shell particles have been synthesized using an improved phase‐inversion process. The resulting particles were successfully used as supports for polyolefin catalysts in the production of polyethylene with broad molecular weight distribution. Through the vapor phase, instead of the liquid phase in the traditional process, a non‐solvent was introduced into a mixture of micrometer‐sized SiO₂ and PSA solution. The core–shell structure of the resulting SiO₂/PSA microspheres was confirmed using optical microscopy, scanning electron microscopy, Fourier transfer infrared spectrometry, thermogravimetric analysis and measurement of nitrogen adsorption/desorption isotherms. In order to avoid agglomeration of particles and to obtain a good dispersion of the SiO₂/PSA core–shell microspheres, the non‐solvent was added slowly. As the concentration of PSA solution increased, the surface morphology of the core–shell particles became looser and more irregular. However, the surface area and the pore volume remained the same under varying PSA concentrations. The SiO₂/PSA core‐shell microspheres obtained were used as a catalyst carrier system in which the core supported (n‐BuCp)₂ZrCl₂ and the shell supported TiCl₄. Ethylene/1‐hexene copolymerization results indicated that the zirconocene and titanium‐based Ziegler–Natta catalysts were compatible in the hybrid catalyst, showing high activities. The resulting polyethylene had high molecular weight and broad molecular weight distribution. Copyright © 2010 Society of Chemical Industry     

Morphology,mechanical properties,and thermal stability of poly(L‐lactic acid)/poly(butylene succinate‐co‐adipate)/silicon dioxide composites

Poly(butylene succinate‐co‐adipate) (PBSA) and two types of SiO₂ (hydrophilic or hydrophobic) were used to modify poly(L ‐lactic acid) (PLLA). The mechanical properties, rheological and thermal behavior, phase morphology, and thermal stability of PLLA/PBSA/SiO₂ composites were investigated. The impact strength, flexural strength, and modulus of PLLA/PBSA blends increased after the addition of hydrophobic SiO₂ without decreasing the elongation at break, and the elongation at break monotonically decreased with increasing hydrophilic SiO₂ content. The melt elasticity and viscosity of the PLLA/PBSA blend increased with the addition of SiO₂. The hydrophilic SiO₂ was encapsulated by the dispersed PBSA phase in the composites, which led to the formation of a core–shell structure, whereas the hydrophobic SiO₂ was more uniformly dispersed and mainly located in the PLLA matrix, which was desirable for the optimum reinforcement of the PLLA/PBSA blend. The thermogravimetric analysis results show that the addition of the two types of SiO₂ increased the initial decomposition temperature and activation energy and consequently retarded the thermal degradation of PLLA/PBSA. The retardation of degradation was prominent with the addition of hydrophobic SiO₂. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis,structure, and thermal stability of poly(methyl methacrylate)‐co‐ poly(3‐tri(methoxysilyil)propyl methacrylate)/ montmorillonite nanocomposites

The structure and the thermodegradation behavior of both poly(methyl methacrylate)‐co‐poly(3‐tri(methoxysilyil)propyl methacrylate) polymer modified with silyl groups and of intercalated poly(methyl methacrylate)‐co‐poly(3‐tri(methoxysilyil)propyl methacrylate)/Cloisite 15A? nanocomposite have been in situ probed. The structural feature were comparatively studied by Fourier transform infrared spectroscopy (FTIR), ¹³C and ²⁹Si nuclear magnetic resonance (NMR), and small angle X‐ray scattering (SAXS) measurements. The intercalation of polymer in the interlayer galleries was evidenced by the increment of the basal distance from 31 to 45 Å. The variation of this interlayer distance as function of temperature was followed by in situ SAXS. Pristine polymer decomposition pathway depends on the atmosphere, presenting two steps under air and three under N₂. The nanocomposites are more stable than polymer, and this thermal improvement is proportional to the clay loading. The experimental results indicate that clay nanoparticles play several different roles in polymer stabilization, among them, diffusion barrier, charring, and suppression of degradation steps by chemical reactions between polymer and clay. Charring is atmosphere dependent, occurring more pronounced under air. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Ultrasonochemical‐assisted fabrication and evaporation‐ induced self‐assembly (EISA) of POSS‐SiO2@Ag core/ABA triblock copolymer nanocomposite film

Poly(ethylene glycol)‐octafunctionalized polyhedral oligomeric silsesquioxane (POSS) (M_n = 5576.6 g/mol) alloying agent stabilized amphiphilic silica@silver metalloid nanocomposite blended with a triblock copolymer poly(p‐dioxanone‐co‐caprolactone)‐block‐poly(ethylene oxide)‐block‐poly(p‐dioxanone‐co‐caprolactone) (POSS‐SiO₂@Ag/PPDO‐co‐PCL‐b‐PEG‐b‐PPDO‐co‐PCL) has been synthesized in both water and in organic medium utilizing ultrasonochemical reaction. The POSS stabilized pre‐made metalloid was successfully dispersed in amphiphilic PPDO‐co‐PCL‐b‐PEG‐b‐PPDO‐co‐PCL (ABA) triblock copolymer matrix of molecular weight 45.9 × 10⁴ g/mol. The mechanism of synthesis of high concentration of SiO₂@Ag nanocomposite from TEOS/AgNO₃ (in the presence of NH₄OH as catalyst/NaBH₄ as reductant) nonmetal/metal precursors and the successful EISA of POSS‐SiO₂@Ag/ABA nanocomposite into films has been discussed. The successful synthesis of metalloid nanocomposite was morphologically accessed by field emission‐scanning electron microscopy, transmission electron microscopy and atomic force microscopy. Surface plasmon resonance was ensured from UV–visible spectral analysis. Identity and the crystallinity of as prepared nanocomposite were studied by X‐ray diffractometer. Structural and luminescence properties of the nanocomposite were examined by Fourier transform infrared spectroscopy and photoluminescence. Thermogravimetric analysis was carried out to study the thermal stability of the resulting hybrid nanocomposite. The resultant inorganic–organic nanocomposite can be easily suspended in water and would be useful in variety of applications. POLYM. COMPOS., 31:1620–1627, 2010. © 2009 Society of Plastics Engineers     

Influence of silica nanoparticles functionalized with poly(butyl acrylate‐co‐glycidyl methacrylate)‐g‐diaminodiphenyl sulfone on the mechanical and thermal properties of bismaleimide nanocomposites

The silica nanoparticles functionalized with poly(butyl acrylate‐co‐glycidyl methacrylate)‐g‐diaminodiphenyl sulfone (P(BA‐co‐GMA)‐g‐DDS)) were prepared via atom transfer radical polymerization and ring open reaction, and characterized by Fourier transform infrared and X‐ray photoelectron spectroscopy. Subsequently, the influence of SiO₂ content on the mechanical and thermal properties for the bismaleimide (BMI) resin nanocomposites modified with pristine SiO₂ and SiO₂‐P(BA‐co‐GMA)‐g‐DDS) was investigated. It was found that SiO₂‐P(BA‐co‐GMA)‐g‐DDS) was more effective as a modifier than pristine SiO₂. The most significant improvement of the impact strength (+108.7%) and flexural strength (+64.5%) was obtained with SiO₂‐P(BA‐co‐GMA)‐g‐DDS) at 0.5 wt% content. Moreover, the thermal properties of nanocomposites were distinctly improved with the addition of functionalized SiO₂. The reasons for these changes were discussed in this article. POLYM. COMPOS., 34:2154–2159, 2013. © 2013 Society of Plastics Engineers     

Structure and Performance of Poly(vinylidene chloride‐co‐vinyl chloride) Porous Membranes with Different Additives

Poly(vinylidene chloride‐co‐vinyl chloride) (P(VDC‐co‐VC) membranes were prepared by non‐solvent‐induced phase separation and adjusted by adding water‐soluble polyethylene glycol (PEG) and water‐insoluble silicon dioxide (SiO₂) hydrophilic nanoparticles. The structure of pores and antifouling performance were investigated to illustrate the effect of these nanoparticles. The cross section of the P(VDC‐co‐VC) membrane exhibited more macropores and the typical finger‐like pores turned into more vertically interconnected ones with increasing PEG content, while the number and size of finger‐like pores became less with increasing SiO₂ content. Considering the filtration and antifouling experiments, the presence of hydrophilic PEG and SiO2 nanoparticles in the P(VDC‐co‐VC) polymer matrix improved the membrane performance in terms of high flux, high BSA rejection ratio, and fouling resistance.     

Gold deposition on Fe3O4/(co)Poly(N‐octadecyl methacrylate) hybrid particles to obtain nanocomposites With ternary intrinsic features

Here, nanocomposite particles with three domains including magnetite nanoparticles, poly(N‐octadecyl methacrylate) (PODMA) or poly(N‐octadecyl methacrylate‐co‐1‐vinylimidazole) (P(ODMA‐co‐VIMZ)), and gold nanoparticles were prepared. Fe₃O₄ nanoparticles with narrow particle size distribution were prepared through a synthetic route in an organic phase in order to achieve good control of the size and size distribution and prevent their aggregation during their preparation. These magnetite nanoparticles, ～ 5 nm in size, were then encapsulated and well‐dispersed in PODMA and P(ODMA‐co‐VIMZ) matrices via a miniemulsion polymerization process to obtain the corresponding nanocomposite particles. The results revealed that Fe₃O₄ nanoparticles were encapsulated and did not migrate towards the monomer/water interface during polymerization. The resulting latex was used as a precursor for the adsorption of Au³⁺ ions on the surface of the polymeric particles and subsequent reduction to produce Fe₃O₄/P(ODMA‐co‐VIMZ)/Au nanocomposite particles. The morphology of the particles from each step was fully characterized by TEM and AFM, and the results of DLS analysis showed their size and size distribution. Measurement of magnetic properties illustrated the superparamagnetic characteristic of the products and it was observed that the encapsulation process and deposition of gold had no effect on the magnetic properties of the resulting particles. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Swelling,pH sensitivity,and mechanical properties of poly(acrylamide‐co‐sodium methacrylate) nanocomposite hydrogels impregnated with carboxyl‐functionalized carbon nanotubes

A series of novel nanocomposite hydrogels were prepared by a cross‐linking copolymerization method. Structural and morphological characterizations of the nanocomposite hydrogels revealed that a good compatibility exists between poly(acrylamide‐co‐sodium methacrylate) [P(AM‐co‐SMA)] and carboxyl‐functionalized carbon nanotubes (MWNTs–COOH). The P(AM‐co‐SMA)/MWNTs–COOH nanocomposite hydrogels with a suitable MWNTs–COOH loading exhibited better swelling capability, higher pH sensitivity, good reversibility, and repeatability, and rapid response to external pH stimuli, compared with the P(AM‐co‐SMA). The compression mechanical tests revealed that the nanocomposite hydrogel displayed excellent compressive strengths and elastic mechanical properties, with higher ultimate compressive stress, and meanwhile still retain a good recoverable strain in the presence of MWNTs–COOH. These excellent properties may primarily be attributed to effectively dispersing of a suitable MWNTs–COOH loading into the matrix of the polymers and formation of additional hydrogen bonds. The nanocomposite hydrogels were expected to find applications in drug controlled release and issue engineering. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Synthesis of CdS nanoparticles dispersed within amphiphilic poly(urethane acrylate‐co‐styrene) films

CdS nanoparticles were prepared using amphiphilic urethane acrylate nonionomer (UAN) precursor chains having a poly(propylene oxide)‐based hydrophobic segment and a hydrophilic poly(ethylene oxide) segment. Cadmium salts were first dissolved in UAN/styrene solutions, and then the solutions were copolymerized to obtain poly(urethane acrylate‐co‐styrene) films containing dissolved cadmium salts. After reduction with H₂S gas, freestanding films containing CdS nanoparticles were obtained. Transmission electron microscopy images of the films showed that 9.67‐nm CdS nanoparticles were dispersed within the poly(urethane acrylate‐co‐styrene) matrix. The formation of CdS nanoparticles was also confirmed with UV absorption spectra and photoluminescence emission spectra of the films. Transmission electron microscopy and dynamic mechanical analysis measurements confirmed that hydrophilic/hydrophobic microphase separation in UAN/styrene solutions occurred during the dissociation of the cadmium salts, and the microphase‐separated structures were locked in by crosslinking copolymerization. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2357–2363, 2005     

Enhancement of the electrical properties of poly(p‐phenylene vinylene) by the incorporation of silicon dioxide nanoparticles

The electrical properties of a poly(p‐phenylene vinylene) (PPV) conjugated polymer using silver (Ag) as a cathode were improved by the incorporation of silicon dioxide (SiO₂) nanoparticles. The current density of the Ag–PPV/SiO₂ nanocomposite system was higher than that of Ag–PPV. A lower level of interfacial oxidation was found in the Ag–PPV/SiO₂ nanocomposite than in Ag–PPV, confirming that a more complete elimination of residue occurred in the nanocomposite. This was due to the relatively large surface area of the PPV/SiO₂ nanocomposite film and the hydrophilic surface of the SiO₂ nanoparticles. The lower level of oxidation contributed to an improvement in the material's current–voltage characteristics. Morphology‐dependent current–voltage characteristics were enhanced by a large variation in the thickness of the Ag–PPV/SiO₂ nanocomposite film because an increased effective field strength could be induced in the thinner regions of the film. The incorporation of SiO₂ nanoparticles altered the effective film thickness and the amount of residue in the interior of the PPV without disrupting the structure of the conjugated polymer. The Ag cathode created a stable interface with the PPV film layer without causing the formation of an organic–metal complex, which would have obstructed electron injection. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Crystallization of poly(ethylene oxide) embedded with surface‐modified SiO2 nanoparticles

The crystallization of poly(ethylene oxide) (PEO) in the presence of silica nanoparticles (SiO₂ NPs) was investigated in terms of heterogeneous nucleation of SiO₂ NPs using polarizing optical microscopy and differential scanning calorimetry. The content and surface functionality of SiO₂ NPs were considered as the main factors affecting crystallization, and the effect of annealing time and temperature was also examined. The SiO₂ NPs acted as heterogeneous nucleates during the crystallization process, thereby enhancing the nucleation density and limiting the spherulitic growth rate. A kinetics study of non‐isothermal crystallization showed that the crystallization rate of 5 wt% SiO₂/PEO nanocomposite was ca 2.1 times higher than that of neat PEO. In addition, among various surface‐functionalized SiO₂ nanoparticles, alkyl‐chain‐functionalized SiO₂ NPs were favorable for achieving a higher crystallization rate due to the enhanced compatibility between the SiO₂ NPs and PEO chains. © 2012 Society of Chemical Industry     

Electrical actuation of ionic hydrogels based on polyvinyl alcohol grafted with poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid‐co‐acrylonitrile) chains

Novel electrically conducting composite materials consisting of poly(pyrrole) (PPy) nanoparticles dispersed in a poly(vinyl alcohol)‐g‐poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid‐co‐acrylonitrile) hydrogels were prepared within the polymer matrix by in situ polymerization of pyrrole. The conversion yield of pyrrole into PPy particles was determined gravimetrically while structural confirmation of the synthesized polymer was sought by Fourier Transform Infrared (FTIR) and UV‐visible spectroscopy. The morphology of PPy nanoparticles containing hydrogel matrix was investigated by Scanning Electron Microscopy (SEM) analysis. Electrical conductivity of nanocomposite hydrogels of different compositions was determined by LCR meter while electroactive behavior of nanocomposite hydrogels swollen in electrolyte solutions was investigated by effective bend angle measurements. POLYM. COMPOS., 2012. © 2011 Society of Plastics Engineers     

ZnO nanoparticles dispersed poly(aniline‐co‐o‐anthranilic acid) composites: Photocatalytic reduction of Cr(VI) and Ni(II)

In this report, poly(aniline‐co‐anthranilic acid)/zinc oxide (poly(ANI‐co‐ANA)/ZnO) nanocomposites were prepared by in‐situ chemical oxidative polymerization. Transmission electron microscopy (TEM), X‐ray diffraction, Fourier transform infrared spectroscopy, and ultraviolet–visible spectroscopy measurements were used to characterize the resulting pure copolymer and nanocomposite. TEM analysis showed that the nanoparticles with a mean diameter of 15–25 nm were dispersed in the copolymer matrix. Thermogravimetric analysis indicated that the nanocomposite had a higher decomposition temperature than the pure copolymer. The conductivity measurements showed the resulting nanocomposite possessed higher conductivity as compared to the pure copolymer. Photocatalytic removal of Cr(VI) and Ni(II) from aqueous solution using as‐synthesized nanocomposite under UV‐light irradiation was studied. The reduction patterns of Cr(VI) and Ni(II) were better fitted to first‐order kinetic model. The nanocomposite was also applied as a photocatalyst for the degradation of methylene blue dye. The result revealed substantial degradation of the dye (∼82%) under UV‐light illumination. POLYM. COMPOS., 35:839–846, 2014. © 2013 Society of Plastics Engineers     

Hybrid titanium catalyst supported on core‐shell silica/poly(styrene‐co‐acrylic acid) carrier

Hybrid titanium catalysts supported on silica/poly(styrene‐co‐acrylic acid) (SiO₂/PSA) core‐shell carrier were prepared and studied. The resulting catalysts were characterized by Fourier transform infrared (FTIR) spectroscopy, laser scattering particle analyzer and scanning electronic microscope (SEM). The hybrid catalyst (TiCl₃/MgCl₂/THF/SiO₂·TiCl₄/MgCl₂/PSA) showed core‐shell structure and the thickness of the PSA layer in the two different hybrid catalysts was 2.0 μm and 5.0 μm, respectively. The activities of the hybrid catalysts were comparable to the conventional titanium‐based Ziegler‐Natta catalyst (TiCl₃/MgCl₂/THF/SiO₂). The hybrid catalysts showed lower initial polymerization rate and longer polymerization life time compared with TiCl₃/MgCl₂/THF/SiO₂. The activities of the hybrid catalysts were enhanced firstly and then decreased with increasing P/P. Higher molecular weight and broader molecular weight distribution (MWD) of polyethylene produced by the core‐shell hybrid catalysts were obtained. Particularly, the hybrid catalyst with a PSA layer of 5.0 μm obtained the longest polymerization life time with the highest activity (2071 kg PE mol^?1 Ti h^?1) and the resulting polyethylene had the broadest MWD (polydispersity index = 11.5) under our experimental conditions. The morphology of the polyethylene particles produced by the hybrid catalysts was spherical, but with irregular subparticles due to the influence of PSA layer. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

A study on thermal behavior of a poly(VDF‐CTFE) copolymers binder for high energy materials

This article describes a study on thermal behavior of poly(vinylidene fluoride‐chlorotrifluoroetheylene) [poly(VDF‐CTFE)] copolymers as polymeric binders of specific interest for high energy materials (HEMs) composites by thermal analytical techniques. The non‐isothermal thermogravimetry (TG) for poly (VDF‐CTFE) copolymers was recorded in air and N₂ atmospheres. The results of TG thermograms show that poly(VDF‐CTFE) copolymers get degrade at lower temperature when in air than in N₂ atmosphere. In the derivative curve, there was single maximum degradation peak (T_max) indicating one‐stage degradation of poly(VDF‐CTFE) copolymers for all the samples. The other thermal properties such as glass transition temperature (T_g) and degradation temperature (T_d) for poly(VDF‐CTFE) copolymers were measured by employing differential scanning calorimeter (DSC) technique. The kinetic parameters related to thermal degradation of poly(VDF‐CTFE) copolymers were investigated through non‐isothermal Kissinger kinetic method using DSC method. The activation energies for thermal degradation of poly(VDF‐CTFE) copolymers were found in a range of 218–278 kJ/mol. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Solvent diffusion in silica/poly[styrene‐co‐(acrylic acid)] core‐shell microspheres by pulsed field gradient NMR techniques

Polymer‐coated SiO₂ particles are prepared by precipitation of poly[styrene‐co‐(acrylic acid)] on SiO₂ microspheres through an improved phase inversion method. The diffusion resistance of the polymer membrane was considered to be the critical reason for producing tailor‐made polyethylene by catalysts supported on these polymer‐coated particles. This paper employs pulsed field gradient NMR (PFG‐NMR) to distinguish diffusion of n‐hexane in different regimes, i.e., in the space between each particle, the pores in SiO₂ and the polymer shell, by their respective diffusion coefficients. By varying the observation time, the time scale of the molecular exchange is discussed. A three‐region ansatz was used to interpret the exchange and diffusion in polymer‐coated SiO₂ system, and was compared with results acquired with noncoated particles. At long diffusion times, the mean‐squared displacement, and thus the averaged self‐diffusion coefficient, of hexane in the system of polymer‐coated SiO₂ particles is significantly reduced. The PSA membrane is identified as an efficient barrier against molecular exchange between the pores in SiO₂ and the intraparticle space. Consistently, the relaxation measurements indicated that the mobility of n‐hexane molecules, especially the rotation of n‐hexane, was limited by the PSA membrane. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40160.     

Synthesis and properties of silver nanoparticles in chitosan‐based thermosensitive semi‐interpenetrating hydrogels

In this article, thermosensitive poly(N‐isopropyl acrylamide‐co‐vinyl pyrrolidone)/chitosan [P(NIPAM‐co‐NVP)/CS] semi‐interpenetrating (semi‐IPN) hydrogels were prepared by redox‐polymerization using N,N‐methylenebisacrylamide as crosslinker and ammonium persulfate/N,N,N′,N′‐tetramethylethylenediamine as initiator. Highly stable and uniformly distributed Ag nanoparticles were prepared by using the semihydrogel networks as templates via in situ reduction of silver nitrate in the presence of sodium borohydride as a reducing agent. Introduction of CS improves the hydrogels swelling ratio (SR) and stabilizes the formed Ag nanoparticles in networks. Scanning electron microscopy and transmission electron microscopy revealed that Ag nanoparticles were well dispersed with diameters of 10 nm. The semi‐IPN hydrogel/Ag composites had higher SR and thermal stability than its corresponding semi‐IPN hydrogels. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and characterization of microbial biodegradable poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)/organoclay nanocomposites

Novel biodegradable poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3HB‐co‐4HB)]/organoclay nanocomposites were prepared via solution casting. Exfoliated nanocomposite structure was confirmed by wide‐angle X‐ray diffraction (WAXD) and transmission electron microscopy (TEM) for the nanocomposites with low organoclay loadings (≤3 wt%), whereas the mixtures of exfoliated and unexfoliated organoclays were appeared in the nanocomposite with an organoclay content of 5 wt%. The organoclay fillers accelerated significantly the cold crystallization process of P(3HB‐co‐4HB) matrix. The thermal stability of the nanocomposites was in general better than that of pristine P(3HB‐co‐4HB). Considerable increase in tensile modulus was observed for the nanocomposites, especially at an organoclay content of 3 wt%. These results demonstrated that the nanocomposites improved the material properties of P(3HB‐co‐4HB). POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers