Grafting polymer from poly(ethylene terephthalate) films by surface‐initiated ATRP

Surface‐initiated atom transfer radical polymerization (ATRP) from poly(ethylene terephthalate) (PET) film was studied. Poly(methyl methacrylate) (PMMA), poly (acrylamide) (PAAM), and their diblock copolymer (PMMA/PAAM) on the surface of PET film were successfully prepared by surface‐initiated ATRP. The structures and properties of the modified PET film were characterized by FT‐IR/ATR, X‐ray photoelectron spectroscopy (XPS), measurements of contact angles, and scanning electronic microscopy (SEM). The results indicate that the surface properties of PET film were greatly improved by grafted polymer. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Surface‐initiated atom‐transfer radical polymerization (SI‐ATRP) of methyl methacrylate from carbon fibre

Surface modification of carbon fibre (CF) by well‐defined polymer brushes was carried out using the ‘grafting from’ method. Poly(methyl methacrylate)‐grafted carbon fibre (CF‐PMMA) was successfully prepared by surface‐initiated atom‐transfer radical polymerization (SI‐ATRP) of methyl methacrylate (MMA) from the macro‐initiator, bromo‐acetic ester‐modified carbon fibre (CF‐BrA), with the complex of 1,10‐phenanthroline and Cu(I)Br as catalyst. The percentage of grafting (PG%) and the conversion of monomer (C%) increased linearly with increasing of polymerization time, and reached 24.0 % and 6.7 %, respectively, after a polymerization time of 6 h, calculated from the elemental analyses (EA). The structural and surface morphological analyses were conducted with Fourier‐transform infrared (FTIR) spectroscopy, X‐ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Copyright © 2005 Society of Chemical Industry     

Synthesis of controlled thermoresponsive PET track‐etched membranes by ATRP method

Controlled thermoresponsive PET track‐etched membranes were synthesized by grafting N‐isopropylacrylamide (NIPAAm) onto the membrane surface via atom transfer radical polymerization (ATRP). The initial measurements were made to determine the anchoring of ATRP initiator on PET membrane surface. Thereafter, polymerization was carried out to control the mass of polymer by controlling reaction time grafted from the membrane surface and, ATR‐FTIR, grafting degree measurements, water contact angle measurements, TGA, and SEM were used to characterize changes in the chemical functionality, surface and pore morphology of membranes as a result of modification. Water flux measurements were used to evaluate the thermoresponsive capacity of grafted membranes. The results show the grafted PET track‐etched membranes exhibit rapid and reversible response of permeability to environmental temperature, and its permeability could be controlled by controlling polymerization time using ATRP method. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Preparation of monodispersed and lipophilic attapulgite and polystyrene nanorods via surface‐initiated atom transfer radical polymerization

A new kind of initiator, 3‐(2‐bromo‐2‐methylacryloxy)propyltriethysiliane (MPTS‐Br), was prepared with a simply hydrobrominated commercial silane coupling agent (3‐methacryloxy‐proplytriethysilane, MPTS). It has been one‐step self‐assemble onto the surface of attapulgite (ATP) nanorods in the dispersion system, and by using this initiator‐modified nanorod (MPTS‐Br‐modified ATP nanoparticles, ATP‐MPTS‐Br) as macroinitiator for atom transfer radical polymerization (ATRP). Structurally well‐defined homopolymer polystyrene (PS) and block polymer poly(styrene‐b‐methyl methacrylate) (PS‐b‐PMMA) chains were then grown from the needle‐shaped nanorods surface to yield monodispersed nanorods composed of ATP core and thick‐coated polymer shell (ATP and PS). The graft polymerization parameters exhibited the characteristics of a controlled/”living” polymerization. The PS‐grafted ATP nanorods could be dispersed well in organic solvent with nanoscale. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Surface‐initiated atom transfer radical polymerization (ATRP) of styrene from silica nanoparticles under UV irradiation

Diethyldithiocarbamyl‐modified silica nanoparticles were prepared and used as macroinitiator for the surface‐initiated atom transfer radical polymerization (SI‐ATRP) of styrene under UV irradiation. Well‐defined polymer chains were grown from the nanoparticle surfaces to yield particles composed of a silica core and a well‐defined, densely grafted outer PS layer with a mass ratio of styrene to silica, or percentage grafting, of 276.3% after an UV irradiation time of 5 h. Copyright © 2004 Society of Chemical Industry     

A facile strategy for the functionalization of poly[cyclotriphosphazene‐co‐(4,4′‐sulfonyldiphenol)] materials

Recently, a new type of phosphazene‐containing material, poly[cyclotriphosphazene‐co‐(4,4′‐sulfonyldiphenol)] (PZS), was successfully prepared. PZS materials including PZS nanotubes, PZS nanofibers and PZS microspheres show excellent thermal stability, biocompatibility and biodegradability. Moreover, PZS‐containing materials such as silver nanowire/PZS, carbon nanotube/PZS and Fe₃O₄/PZS nanotubes have also been prepared. Therefore, we explored a specific method for the functionalization of these PZS and PZS‐containing materials to expand their scope of application. As a model of various PZS and PZS‐containing materials, PZS microspheres (PZSMs) were functionalized via surface‐initiated atom transfer radical polymerization (ATRP). Polymerization of styrene occurred at surface sites covalently derivatized with ATRP initiators to form PZSM–polystyrene. The number‐average molecular weight (M_n) of grafted polymer chains could be well controlled. Furthermore, PZSM–polystyrene was still active for further block copolymerization of methyl methacrylate. Both styrene‐ and acrylate‐type monomers could be directly polymerized or block copolymerized from the surface of PZS and PZS‐containing materials using surface‐initiated ATRP. M_n of grafted polymer chains could be well controlled. This facile strategy could pave the way for a wider range of applications of these materials. Copyright © 2010 Society of Chemical Industry     

Synthesis of NR‐g‐PMMA by “grafting from” method using ATRP process

Grafting poly(methyl methacrylate) or PMMA from natural rubber (NR) using ATRP process, NR has to be transformed into bromoalkyl‐functionalized NR (NRBr) acting as ATRP macroinitiator. The NRBr was prepared by two‐step chemical modification i.e., epoxidation and epoxide ring opening reaction using a nucleophile containing bromine atom such as 2‐bromopropionic acid ( A1 ) and 2‐bromo‐2‐methylpropionic acid ( A2 ). The fixation of A1 and A2 on 4‐methyl‐4‐octene, a model representing one repeat unit of NR, modified by epoxidation was prior studied and it was found that the resulting addition products from A2 using as ATRP initiator for MMA gave a better control of M _n,exp and low PDI of PMMA than that from A1 . Then, the NR was transformed into ATRP rubber macroinitiator via epoxidation, followed by epoxide ring addition with only A2 . ¹H NMR was employed to determine the amount of A2 addition units on NR, which is considered to be the same amount of grafting sites for ATRP of MMA. The grafting of PMMA was then successfully carried out from the NR backbone by ATRP process. The PMMA grafts of the NR‐g‐PMMA were indeed linked to the NR backbone via ester linkage of the A2 unit. The PMMA grafts could be cleaved from the NR backbone by acid hydrolysis, while PMMA grafting by other conventional radical reaction could not be done. Then, the average MW of PMMA grafts after separation using acetone extraction was evaluated. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Fabrication and characterization of tunable wettability surface on copper substrate by poly(ionic liquid) modification via surface‐initiated nitroxide‐mediated radical polymerization

Poly(ionic liquid) surfaces with tunable wettability were successfully prepared on micro/nanoscale CuO/Cu composite substrates by a surface‐initiated nitroxide‐mediated radical polymerization technique. Various characterization techniques including X‐ray photoelectron spectroscopy, cold field emission scanning electron microscopy, and static water contact angle measurement were used to characterize the surfaces for each surface modification step. Kinetic studies revealed that the polymer chain growth from the surface was a controlled/“living” polymerization process. The surface with tunable wettability, reversible switching between hydrophilicity and hydrophobicity can be easily achieved by sequential counteranion exchange. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

“Smart” membrane materials: Preparation and characterization of PVDF‐g‐PNIPAAm graft copolymer

In this research, a smart membrane material of graft copolymer of poly(vinylidene fluoride) with poly(N‐isopropylacrylamide) (PVDF‐g‐PNIPAAm) was synthesized by atom transfer radical polymerization (ATRP) using poly(vinylidene fluoride) (PVDF) as a macroinitiator and direct initiation of the secondary fluorinated site PVDF facilitates grafting the N‐isopropylacrylamide comonomer. The copolymers were characterized by Fourier transform infrared (FTIR), ¹H NMR, gel‐permeation chromatography (GPC), and X‐ray photoelectron spectroscopy (XPS). The temperature‐sensitive membrane was prepared from the PVDF‐g‐PNIPAAm graft copolymers by the phase inversion method. The effects of temperature on the flux of pure water of membrane was investigated. The results showed that alkyl fluorides were successfully applied as ATRP initiators in the synthetic condition and the flux of pure water through the PVDF‐g‐PNIPAAm membrane depended on the temperature change. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1482–1486, 2007     

Preparation of hydrophilic woven fabrics: Surface modification of poly(ethylene terephthalate) by grafting of poly(vinyl alcohol) and poly(vinyl alcohol)-g-(N-vinyl-2-pyrrolidone)

One of the most industrially important synthetic textile materials, woven poly(ethylene terephthalate) (PET) fabrics, have limitations in the usage of casual apparel applications due to their unwanted hydrophobicity. For that reason, in this study, to impart permanent hydrophilicity to the PET fabrics, hydrophilic poly(vinyl alcohol) (PVA) and a PVA-based copolymer were introduced to the alkaline hydrolysis pretreated PET surface by graft copolymerization for the first time. The graft modification of PET fabric surface was performed with an industrial-adaptable approach. The synthesis of a novel PVA-g-(N-vinyl-2-pyrrolidone) copolymer was achieved by the introduction of glycidyl methacrylate monomer to the PVA backbone. The structure of the copolymer was evidenced by attenuated total reflection–Fourier transform infrared spectroscopy and ¹H-NMR techniques. The introduction of PVA and copolymer structures with desired functional groups to the PET fabric surface was confirmed with the X-ray photoelectron spectroscopy technique. It was obtained that the contact angle–wetting time of PET fabric (145° and 98 s) could be dropped to 37° and 0.1 s and 64° and 0.7 s after PVA and copolymer grafting, respectively. This suggests that the graft-modified PET fabrics may find the potential of use in the textile applications as the alternative hydrophilic materials. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48584.     

Preparation and characterization of polyaniline N‐grafted with poly(ethyl acrylate) synthesized via atom transfer radical polymerization

Polyaniline (PANI) N‐grafted with poly(ethyl acrylate) (PEA) was synthesized by the grafting of bromo‐terminated poly (ethyl acrylate) (PEA‐Br) onto the leucoemeraldine form of PANI. PEA‐Br was synthesized by the atom transfer radical polymerization of ethyl acrylate in the presence of methyl‐2‐bromopropionate and copper(I) chloride/bipyridine as the initiator and catalyst systems, respectively. The leucoemeraldine form of PANI was deprotonated by butyl lithium and then reacted with PEA‐Br to prepare PEA‐g‐PANI graft copolymers containing different amounts of PEA via an N‐grafting reaction. The graft copolymers were characterized by Fourier transform infrared spectroscopy, elemental analysis, and thermogravimetric analysis. Solubility testing showed that the solubility of PANI in chloroform was increased by the grafting of PEA onto PANI. The morphology of the PEA‐g‐PANI graft copolymer films was observed by scanning electron microscopy to be homogeneous. The electrical conductivity of the graft copolymers was measured by the four‐probe method. The results show that the conductivity of the PANI decreased significantly with increasing grafting density of PEA onto the PANI backbone up to 7 wt % and then remained almost constant with further increases in the grafting percentage of PEA. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

A new synthetic approach to asymmetric amphiphilic ABA′ block copolymers by ATRP and click reactions

Well‐defined asymmetric amphiphilic ABA′ block copolymers composed of poly(ethylene oxide) monomethylene ether (MPEO) with different molecular weights as A or A′ block and poly(styrene) (PS) as B block were synthesized by the combination of atom transfer radical polymerization (ATRP) and click reactions. First, bromine‐terminated diblock copolymer poly(ethylene oxide) monomethylene ether‐block‐poly(styrene) (MPEO‐PS‐Br) was prepared by ATRP of styrene initiated with macroinitiator MPEO‐Br, which was prepared from the esterification of MPEO and 2‐bromoisobutyryl bromide. Then, the azido‐terminated diblock copolymers MPEO‐PS‐N₃ were prepared through the bromine substitution reaction with sodium azide. Propargyl‐terminated MPEO with a different molecular weight was prepared under the basic condition from propargyl alcohol and p‐toluenesulfonyl‐terminated MPEO, which was prepared through the esterification of MPEO and p‐toluenesulfochloride using pyridine as solvent. Asymmetric amphiphilic ABA′ block copolymers, with a wide range of number–average molecular weights from 1.92 × 10⁴ to 2.47 × 10⁴ and a narrow polydispersity from 1.03 to 1.05, were synthesized via a click reaction of the azido‐terminated diblock copolymers and the propargyl‐terminated MPEO in the presence of CuBr and 1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) catalyst system. The structures of these ABA′ block copolymers and corresponding precursors were characterized by NMR, IR, and GPC. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and morphology of amphiphilic polystyrene–poly (2‐vinylpyridine) heteroarm star copolymers prepared by ATRP

BACKGROUND: The self‐assembly of amphiphilic copolymers has been demonstrated to be a powerful route towards supramolecular objects with novel architectures, functions and physical properties. In this study, the synthesis and morphology of amphiphilic linear polystyrene (PS)‐block‐poly(2‐vinylpyridine) (P2VP) and heteroarm star PS‐star‐P2VP copolymers are studied. The dispersion of silver nanoparticles with the prepared PS‐block‐P2VP and PS‐star‐P2VP copolymers is also discussed. RESULTS: Amphiphilic copolymers with different P2VP chain lengths were successfully synthesized using atom transfer radical polymerization (ATRP). The copolymers prepared had low polydispersity indices. Various aggregate morphologies, including spheres, vesicles, rods, large compound micelles, two‐dimensional ring‐like and three‐dimensional hollow structures, were formed by varying the hydrophilic coil length and the selective solvent content. Silver nanoparticles showed good dispersion behavior in both types of copolymers. CONCLUSION: Based on this study, it will be possible to prepare metal/copolymer nanocomposites by direct mixing. Further, the PS‐block‐P2VP and PS‐star‐P2VP copolymers prepared can be used in the preparation of nanoporous films as templates and nanoparticles as nanoreactors. They can also be applied in terms of oil recovery, paints and cosmetics formulations, as well as in pharmaceutical and medical applications as rheological agents. Copyright © 2008 Society of Chemical Industry     

Surface grafting of polyacrylamide from polyethylene‐based copolymer film

Atom transfer radical polymerization (ATRP) was used to grow polyacrylamide from the surface of ethylene–acrylic acid copolymer (EAA) film. The surface functionalization constituted initiator immobilization and surface graft polymerization. All reaction steps were conducted at 24 ± 3°C; polymerization was done in aqueous solution. For initiator immobilization, the carboxylic acid groups on EAA film were converted to acid chloride groups; further reaction with ethanolamines gave hydroxyl groups onto which 2‐bromoisobutyryl bromide initiator was attached. ATR‐FTIR data indicated that 1.64 ± 0.09 times higher initiator density was achieved by using diethanolamine, relative to ethanolamine. Acrylamide monomer was polymerized from the initiator by ATRP to yield nondistorted, transparent films with polymerization times of up to 1 h. For films prepared using diethanolamine, 1 h polymerization time reduced the static water contact angle by more than 50°, significantly increasing the hydrophilicity of the film surface. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1589–1595, 2004     

Synthesis and characterization of poly(vinyl chloride‐co‐vinyl acetate)‐graft‐poly[(meth)acrylates] by atom transfer radical polymerization

The graft polymerization of methyl methacrylate and butyl acrylate onto poly(vinyl chloride‐co‐vinyl acetate) with atom transfer radical polymerization (ATRP) was successfully carried out with copper(I) thiocyanate/N,N,N′,N′,N″‐pentamethyldiethylenetriamine and copper(I) chloride/2,2′‐bipyridine as catalysts in the solvent N,N‐dimethylformamide. For methyl methacrylate, a kinetic plot of ln([M]₀/[M]) (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) versus time for the graft polymerization was almost linear, and the molecular weight of the graft copolymer increased with increasing conversion, this being typical for ATRP. The formation of the graft polymer was confirmed with gel permeation chromatography, ¹H‐NMR, and Fourier transform infrared spectroscopy. The glass‐transition temperature of the copolymer increased with the concentration of methyl methacrylate. The graft copolymer was hydrolyzed, and its swelling capacity was measured. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 183–189, 2005     

原子转移自由基聚合法合成PS-g-PMMA

以氯乙酰化聚苯乙烯微球（PS-acyl-Cl）为大分子引发剂,甲基丙烯酸甲酯（MMA）为单体,CuCl/CuCl₂及N,N,N′,N′-四甲基乙二胺（TMEDA）为催化体系的原子转移自由基聚合反应,成功在PS-acyl-Cl表面接枝上PMMA分子链而获得聚苯乙烯 接枝 聚甲基丙烯酸甲酯（PS-g-PMMA）。考察了催化剂、反应温度、溶剂用量等条件对接枝反应的影响,优化的反应条件下,使用氯乙酰基担载量3.44 mmol.g^-1的PS-acyl-Cl,15 h可获得增重率687% 的PS-g-PMMA,且反应表现出一级动力学特征（k=513×10^-5 s^-1）。通过改变反应条件,可得到不同PMMA接枝链长的PS-g-PMMA。反应得到的PS-g-PMMA经水解后有望作为高担载量弱酸型离子交换树脂或进一步功能化后作为酶的柔性固定化载体。     

Synthesis of well‐defined glycoconjugate polyacrylamides via preactivated polymers prepared by ATRP

Poly(N‐acryloxysuccinimide) (polyNAS) with narrow molecular weight distributions (MWD) applicable for the preparation of well‐defined glycoconjugate polyacrylamides were successfully prepared by atom transfer radical polymerization (ATRP). The structures of polyNAS were characterized by ¹H‐NMR and GPC. GPC results showed that the molecular weight polydispersity indices (PDI) range from 1.17 to 1.29. The molecular weights could be calculated based on ¹H‐NMR results but GPC results of polyNAS by using 0.01M LiBr/DMF did not give accurate molecular weights, probably because of the complex interaction in the system. The effects of free N‐hydroxysuccimide produced in the polymerization processes on the free‐radical concentrations and apparent initiation efficiencies of ATRP were discussed. Well‐defined glycoconjugate polyacrylamides (i.e., with narrow molecular weight distributions and designed glycoconjugate degrees) were prepared by substituting N‐oxysuccimide units with galactosamine followed by reaction of ethanolamine. The galactose conjugate degrees were determined by ¹H‐NMR and the total substitutions of N‐oxysuccimides were verified by ¹H‐NMR and FTIR. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 189–194, 2005     

Synthesis,characterization, and property of end-functionalized telechelic PST via ATRP

Polystyrene incorporating carboxylate group as α-end was synthesized by using initiator 4-chloromethyl benzoic acid via atom transfer radical polymerization. Its ω-chlorine end-group was transformed by cumic acid, diethyl malonate, and thiol, respectively, to form end-functionalized telechelic polystyrenes. These PSts with different functionalized ω-end group (PSt 1 , PSt 2 , and PSt 3) were obtained and characterized by H NMR and TGA. This type of end-functionalized telechelic polymers can further act as polymeric ligands to form polymeric metal complexes. In this study, PSt 1 with carboxylate group at each end was allowed to react with Eu(DBM)₂Cl·2H₂O to afford a new polymeric complex PSt 1 -Eu(III) showing significant red-light emission. Moreover, the film of PSt 1 -Eu shows similar emission pattern with its DMF solution. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of polyacrylonitrile via reverse ATRP initiated by 1,1,2,2‐tetraphenyl‐1,2‐ethanediol/CuCl2/2,2′‐bipyridine

The reverse atom‐transfer radical polymerization (RATRP) technique using CuCl₂/2,2′‐bipyridine (bipy) complex as a catalyst was applied to the living‐radical polymerization of acrylonitrile (AN). 1,1,2,2‐Tetraphenyl‐1,2‐ethanediol (TPED) was first used as the initiator in this copper‐based RATRP initiation system. A CuCl₂ to bipy ratio of 0.5 not only gives the best control of molecular weight and its distribution, but also provides rather rapid reaction rate. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 53.2 kJ mol^?1. Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed the chain extension polymerization in the presence of CuCl/bipy catalyst system via a conventional ATRP process. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3529–3533, 2007     

辐射接枝改性聚酯薄膜表面防雾滴性研究

采用γ射线辐照引发接枝的方法,在聚酯(PET)膜表面接枝丙烯酸、丙烯酰胺、丙烯酸羟乙酯,获得具有表面亲水性的聚酯膜。并研究了不同辐照强度、辐照时间、温度、单体浓度下的接枝规律。结果表明,随着接枝率的上升,PET膜对水接触角逐渐降低,达到一定值后变化不大。