Biosorption from aqueous solutions by eggshell membranes and Rhizopus oryzae: equilibrium and kinetic studies

This study assesses the use of eggshell membranes and Rhizopus oryzae as media for the biosorption of p‐chlorophenol (p‐CP), 2,4‐dichlorophenol (2,4‐DCP), 3,5‐dichlorophenol (3,5‐DCP), reactive dye and cadmium from aqueous solutions. The performance of the adsorbents was quantified by measuring the equilibrium uptake and the batch rate kinetics from solutions. The constants in the Freundlich, Langmuir and Redlich–Peterson isotherm models were calculated through the linearization of the equations and linear regression. The kinetics of the adsorption systems for cadmium and a reactive dye have been assessed in a batch stirred adsorber. The effect of the process parameters such as pH, adsorbate concentration, adsorbent dosage, adsorbent particle size, temperature and agitation speed are reported. The external mass transfer coefficients are reported for some different system conditions. Both materials are determined to be effective adsorbents and could find application in the treatment of contaminated wastestreams. © 2002 Society of Chemical Industry     

Removal of Methylene Blue from aqueous solutions using as biosorbent Sargassum muticum: an invasive macroalga in Europe

Methylene Blue adsorption on Sargassum muticum, an invasive macroalga in Europe, has been investigated using visible absorption spectroscopy. Different pre‐treatments, protonation and chemical cross‐linking with CaCl₂ or H₂CO, have been tested in order to improve the stability as well as the adsorption capacity of the algal biomass. The equilibrium binding has been described in terms of Langmuir or Freundlich isotherms depending on the algal pre‐treatment; from the maximum adsorption capacity values, an estimation of the algal specific surface area was made. Moreover, it has been found that adsorption kinetics can be described according to the first order Lagergren model, from which the rate constant and the adsorption capacity were determined. Finally, simple empirical equations were obtained to evaluate the amount of Methylene Blue removed at any initial concentration and reaction time. The results obtained have shown that this type of material has a high adsorption capacity for Methylene Blue dye, this feature together with the short times needed to reach the equilibrium suggest that Sargassum muticum can be used as a low‐cost biosorbent in wastewater treatments. Copyright © 2004 Society of Chemical Industry     

Removal of Rhodamine B from aqueous solutions and wastewater by walnut shells: kinetics,equilibrium and thermodynamics studies

An adsorption study of Rhodamine B (RB) dye from aqueous solutions was carried out using walnut shells pretreated by different methods. In addition to the effects of the pretreatment, the effects of various parameters like pH, adsorbent dose, contact time, initial dye concentration and temperature on the adsorption of RB was studied. The adsorption process was highly pH dependent and a maximum adsorption was achieved at pH 3.0. The best fit for the rates of dye adsorption was a pseudo-second-order kinetic model with good correlation coefficients (R²>0.99). Langmuir isotherms were used to determine that the maximum loading capacity of the different walnut shells and the RB capacities ranged from 1.451–2.292 mg·g^-1. The dye adsorption was also evaluated thermodynamically. Positive standard enthalpy (?H°) values were obtained indicating that the RB adsorption process is endothermic as well as ?G° and ?S° values showed that adsorption process is spontaneous with an increased randomness at the solid-liquid interface. Desorption studies were carried out to explore the feasibility of regenerating the used walnut shells and it was found that 97.71%–99.17% of the retained RB was recovered with 0.1 mol?L^-1 NaOH solution. The walnut shells were also successfully used to remove RB from industrial effluents.     

Nickel removal characteristics of an immobilized macro fungus: equilibrium,kinetic and mechanism analysis of the biosorption

BACKGROUND: An immobilized new biosorbent was prepared from macro fungi Lactarius salmonicolor for the effective removal of nickel ions from aqueous media. Operating conditions were optimized as functions of initial pH, agitation time, sorbent amount and dynamic flow rate. Immobilization and biosorption mechanism were examined and the developed biosorbent was tested for the removal of nickel ions from real wastewater. RESULTS: Biosorption performance of the biomass continuously increased in the pH range 2.0–8.0. The coverage of the biosorbent surface by silica gel resulted in a significant increase in biosorption yield of nickel ions. The highest nickel loading capacity was obtained as 114.44 mg g^?1 using a relatively small amount of immobilized biosorbent. Biosorption equilibrium time was recorded as 5 min. Experimental data were analyzed by different isotherm and kinetic models. Infrared spectroscopy, scanning electron microscopy and X‐ray energy dispersive analysis confirmed the process. The sorbent exhibited relatively good recovery potential in dynamic flow mode studies. Biosorption capacity of immobilized biosorbent was noted as 14.90 mg g^?1 in real wastewater. CONCLUSION: Silica gel immobilized biomass of L. salmonicolor is to be a low cost and potential biosorbent with high biosorption capacity for the removal of contaminating nickel from aqueous media. © 2012 Society of Chemical Industry     

Removal of Brill Red 5B from an aqueous solution using Cicca acida biomass

The biosorption of Brill Red 5B from an aqueous solution, using Cicca acida plant's leaves was investigated in a batch system with the influence of pH (1–6), temperature (25–35°C) and initial dye concentration (10–100 mg/L). Maximum biosorption was observed at initial pH of 2.0, temperature of 30°C and at the initial dye concentration of 100 mg/L. Batch biosorption kinetic was studied using the pseudo first and pseudo‐second‐order rate equations. From the result, it was observed that pseudo‐second‐order rate expression fitted the experimental data well when compared to pseudo first order kinetic model. The intra‐particle diffusion coefficient (K_i) and effective diffusion coefficient (D_i) values obtained for the sorption of Brill Red 5B using C. acida plant's leaves were found to be increased with increase in initial dye concentration.     

Adsorption isotherms,kinetic, and desorption studies on removal of toxic metal ions from aqueous solutions by polymeric adsorbent

Adsorption of Cd(II), Co(II), and Ni(II) on aminopyridine modified poly(styrene‐alt‐maleic anhydride) crosslinked by 1,2‐diaminoethane as an ion exchange resin has been investigated in aqueous solution. Adsorption behavior of these metal ions on the resin was studied by varying the parameters such as pH (2–6), adsorbent dose (0–4.0 g/L), contact time (0–240 min), and metal ions concentration (20–300 mg/L). Adsorption percentage was increased by increasing each of these parameters. The isotherm models such as: Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich were used to describe adsorption equilibrium. The results showed that the best fit was achieved with the Langmuir isotherm equation, yielding maximum adsorption capacities of 81.30, 49.02, and 76.92 mg/g for Cd(II), Co(II), and Ni(II), respectively. The pseudo‐first‐order, pseudo‐second‐order, and intra‐particle diffusion kinetics equations were used for modeling of adsorption data and it was shown that pseudo‐second‐order kinetic equation could best describe the adsorption kinetics. The intra‐particle diffusion study revealed that external diffusion might be involved in this case. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41642.     

Biosorptive Removal of Ni(II) from Aqueous Solution by Caesalpinia bonducella Seed Powder

The present work deals with the use of Caesalpinia bonducella seed powder (CBSP) as a biosorbent for Ni(II) removal from aqueous solution. The nature and morphology of the sorbent were determined using FTIR spectral, SEM, and EDX analysis. The biosorption characteristics of Ni(II) onto CBSP was investigated as a function of pH, biosorbent dosage, contact time, initial metal ion concentration, and temperature. Langmuir and Freundlich isotherms were used to fit the experimental data. The best interpretation for the equilibrium data was given by the Langmuir isotherm. The maximum biosorption capacity was found to be 188.7 mg/g for Ni(II) at pH 5.0 and at 323 K. The equilibrium biosorption data were well fitted with the pseudo-second-order kinetic equation. The values of thermodynamic parameters (ΔG^o, ΔH^o, and ΔS^o) indicated that the biosorption of Ni(II) onto CBSP was feasible, spontaneous and exothermic in nature. The FTIR results revealed that hydroxyl, amine, carboxyl, and carbonyl functional groups are responsible for Ni(II) biosorption onto CBSP.     

Investigation of adsorption of lead,mercury and nickel from aqueous solutions onto carbon aerogel

Recently a new form of activated carbon has appeared: carbon aerogel (CA). Its use for the removal of inorganic (and especially metal ions) has not been studied. In the present study, the adsorption of three metal ions, Hg(II), Pb(II) and Ni(II), onto carbon aerogel has been investigated. Batch experiments were carried out to assess adsorption equilibria and kinetic behaviour of heavy metal ions by varying parameters such as agitation time, metal ions' concentration, adsorbent dose and pH. They facilitated the computation of kinetic parameters and maximum metal ion adsorption capacities. Increasing the initial solution pH (2–10) and carbon concentration (50–500 mg per 50 cm³) increases the removal of all three metal ions. A decrease of equilibrium pH with an increase of metal ion concentration led us to propose an adsorption mechanism by ion exchange between metal cations and H⁺ at the carbon aerogel surface. Carboxylic groups are especially involved in this adsorption mechanism. Langmuir and Freundlich isotherm models were used to analyse the experimental data of carbon aerogel. The thermodynamics of the metal adsorption was also investigated for the practical implementation of the adsorbent. The sorption showed significant increase with increase of temperature. Kinetics models describing the adsorption of Hg(II), Pb(II) and Ni(II) ions onto carbon aerogel have been compared. Kinetics models evaluated include the pseudo‐first order and second order model. The parameters of the adsorption rate constants have been determined and the effectiveness of each model assessed. The result obtained showed that the pseudo‐second order kinetic model correlated well with the experimental data and better than the pseudo‐first order model examined in the study. Mass transfer coefficients obtained can be useful in designing wastewater treatment systems or in the development of environmental technologies. Copyright © 2005 Society of Chemical Industry     

Removal of hexavalent chromium from aqueous solutions by micellar compounds

The recovery of toxic metal compounds is a deep concern in all industries. Hexavalent chromium is particularly worrying because of its toxic influence on human health [1], [2] and [3]. Actually the wastewater norm (0.1 mg/l) is very strict and will become more severe in the near future. We present in this paper the experimental results of the metal ion which is bound on micellar compounds and then retained by ultrafiltration membrane. A well known surfactant cetyltrimethylammonium bromide (CTABr) is used as an adsorbent to remove hexavalent chromium from wastewaters. The effects of various experimental parameters on equilibrium adsorption of Cr(VI) on the surfactant have been investigated using batch adsorption experiments. It was found that the capacity of chromium adsorption on CTABr increases with initial metal concentration and in a lesser extent with pH solution. Total chromium adsorption decreased slightly with a rise in temperature suggesting an exothermic adsorption of chromium, thermodynamic parameters are evaluated. It has also been observed that the capacity of chromium adsorption decreases with the mass of adsorbent and concentration of other ions present in the solution. The metal ion adsorption on surfactant is well represented by the Freundlich isotherm.     

Removal of arsenic(III) from aqueous solution by concrete-based adsorbents

The present paper investigates the adsorption of arsenic(III) (As(III)) onto 2 concrete-based low-cost materials, i.e., Aerocrete and Vermiculite impregnated by ferric oxyhydroxide. Adsorption experiments were performed to study the effect of initial pH, initial concentration of As(III), contact time, and ions usually present in water. No significant effect of the initial pH on the adsorption of As(III) by Aerocrete and Vermiculite was observed at the pH range of 4–8. The As(III) removal efficiency decreased at a high initial pH (i.e., 10). The Langmuir isotherm showed that the maximum As(III) adsorption capacity of Aerocrete and Vermiculite is 15.15 and 13.51 mg/g, respectively, which is higher than that observed using titanium dioxide (i.e., 3.52 mg/g), at pH 7 and 24 ±1 °C. A pseudo-second order kinetic model fitted well the experimentally obtained kinetic data. This suggests that chemisorption most probably controls the adsorption of As(III) on Aeroctere and Vermiculite. Significantly, As(III) (1 mg/L) could be removed almost completely by both Aeroctere and Vermiculite (1 g/L) in 30 and 60 min, respectively at pH 7 and 24 ±1 °C. Importantly, Ca²⁺, Mg²⁺, Na⁺, HCO₃⁻, SO₄²⁻, and Cl⁻ ions had no significant effect on the adsorption of As(III) on Aeroctere and Vermiculite. The results showed that the proposed concrete-based adsorbents have the potential to remove As(III) from water.     

Removal of manganese from water by electrocoagulation: Adsorption,kinetics and thermodynamic studies

The present study provides an electrocoagulation process for the removal of manganese (Mn) from water using magnesium as anode and galvanised iron as cathode. The various operating parameters like effect of initial pH, current density, electrode configuration, inter‐electrode distance, coexisting ions and temperature on the removal efficiency of Mn were studied. The results showed that the maximum removal efficiency of 97.2% at a pH of 7.0 was achieved at a current density 0.05 A/dm² with an energy consumption of 1.151 kWhr/m³. Thermodynamic parameters, including the Gibbs free energy, enthalpy and entropy, indicated that the Mn adsorption of water on magnesium hydroxides was feasible, spontaneous and endothermic. The experimental data were fitted with several adsorption isotherm models to describe the electrocoagulation process. The adsorption of Mn preferably fitting the Langmuir adsorption isotherm suggests monolayer coverage of adsorbed molecules. In addition, the adsorption kinetic studies showed that the electrocoagulation process was best described using the second‐order kinetic model at the various current densities. © 2012 Canadian Society for Chemical Engineering     

Removal of reactive blue 19 and reactive blue 49 textile dyes by citrus waste biomass from aqueous solution: Equilibrium and kinetic study

The purpose of this study was to establish the potential of inexpensive and locally available biomaterial, that is, lignocellulosic waste of Citrus sinensis as biosorbent to remove reactive anthraquinone dyes from aqueous solution. The effects of immobilisation and chemical treatment of biosorbent were also explored for the enhanced sorption of dyes. Biosorbent was chemically treated with organic and inorganic reagents of which acetic acid augmented the sorption capacities for Reactive blue 19 and Reactive blue 49 attaining equilibrium in 60 min. While immobilisation of biosorbent into calcium alginate beads reduced the sorption capacity and the time to achieve equilibrium was prolonged up to 120 min. Sorption of both reactive dyes was found to be dependent on pH of media and maximum removal was observed at pH 2. The sorption process was fast and the data followed pseudo‐second‐order kinetic rate equation (R² = 0.99). The equilibrium data were also fitted to Freundlich, Langmuir and Temkin isotherms. The mechanism of sorption was found to be physiosorption. FTIR analysis and SEM imaging of biosorbent were also carried out to study functional groups involved and morphological changes at the surface of biomass. © 2011 Canadian Society for Chemical Engineering     

Fly ash as a sorbent for boron removal from aqueous solutions: Equilibrium and thermodynamic studies

ABSTRACT

This study presents the application of fly ash from brown coal and biomass burning power plant as a sorbent for the removal of boron ions from an aqueous solution. The adsorption process efficiency depended on the parameters, such as adsorbent dosage, pH, temperature, agitation time and initial boron concentration. The experimental data fitted well with the Freundlich isotherm model and the maximum capacity was found to be 16.14 mg g^?1. The adsorption kinetics followed the pseudo-second-order model. Also, the intra-particle diffusion model parameters were calculated. Thermodynamic parameters such as change in free energy (ΔG°), enthalpy (ΔH°), entropy (ΔS°) revealed on exothermic nature of boron adsorption onto the fly ash.     

Biosorption of Pb(II) and Ni(II) ions by chemically modified Eclipta alba stem powder: Kinetics and equilibrium studies

Biosorption of Pb(II) and Ni(II) ions onto the Eclipta alba stem powder (EAS) was investigated in a batch system. The biosorbent was characterized by fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), transmission electron microscopy (TEM) and elemental analysis. Adsorption influencing factors like pH, adsorbent dose, initial metal ion concentration and contact time were investigated. The adsorption mechanism of Pb(II) and Ni(II) followed the pseudo-second-order kinetic model (R² > 0.998). The Langmuir isotherm model fitted well and the maximum monolayer adsorption capacity of the sorbent for Pb(II) and Ni(II) was found to be 66.2 ± 1.9 mg g^?1and 62.5 ± 1.8 mg g^?1, respectively. Desorption and recovery were carried out using dilute HCl solution.     

Removal of strontium from aqueous solutions by adsorption onto activated carbon: kinetic and thermodynamic studies

This work reports the adsorption of strontium from aqueous solutions onto activated carbon. Various factors such as pH, initial concentration of strontium, particle size and temperature were considered. The optimum conditions obtained were: pH value = 4.0, contact time = 8 h, initial concentration of Sr(II) = 100 mg/l, particle size = 270 μm and temperature of 293.15 K. The adsorption of strontium(II) on activated carbon follows pseudo-first order kinetics and the energy of activation E_a calculated using the Arrehenius equation was found to be 3.042 kJ/mol.The adsorption isotherms could be fitted by the Langmuir model with the maximum adsorption capacity Q_o being 5.07×10^–4 mol/g at 293.15 K. A dimensionless separation factor R_L was used to judge the favourable adsorption. The values of the mass transfer coefficient β_L (cm/s) at different temperatures indicated that the velocity of mass transfer of Sr(II) ions onto activated carbon was slow. The intraparticle diffusion mechanism is of great importance in determining the overall rate of removal and the negative entropy of activation ΔS^# value 145.13 J/mol K, reflects that no significant change occurs in the internal structure of activated carbon during adsorption of strontium(II). The Gibbs free energy ΔG°_ads values range from –36.61 kJ/mol to –41.75 kJ/mol at 293.15–333.15 K, which show the physical adsorption properties of activated carbon and indicate the feasibility of the process.     

Extraction of citric acid from aqueous solutions with Alamine 336: equilibrium and kinetics

Citric acid is one of the organic acids for which the world market is growing every year. This article describes equilibria and kinetic studies for the extraction of citric acid by Alamine 336 with methyl‐iso‐butylketone (MIBK) as diluent. The theory of extraction accompanied by a chemical reaction has been used to obtain the intrinsic kinetics of extraction of citric acid by Alamine 336 in MIBK. The reaction has been found to be first order in both Alamine 336 and citric acid with a rate constant of 0.013 m³ kmol^?1 s^?1. Copyright © 2004 Society of Chemical Industry     

Optimization,equilibrium, and kinetic studies of adsorptive removal of cobalt(II) from aqueous solutions using Cocos nucifera L.

Water discharged by several industries contains toxins, and it needs to be treated before disposal or reuse. In the present study, feasibility of adsorptive removal of Cobalt(II) ion in waste water, using Cocos nucifera leaf powder, is exhaustively studied and reported. Effects of contributing parameters like Cobalt(II) ion concentration, initial solution pH, adsorbent dosage, and temperature are studied and the levels of parameters optimized, following a two level?four full-factorial experimental design with 6 center points and 24 non-center points. 15?g/L of Cocos nucifera leaf powder could reduce the Cobalt(II) ion concentration by 84.82% in 70?min at a pH of 5.0 and a temperature of 303?K. Freundlich model is marginally superior to Langmuir, Halsey, and Temkin models in representing the equilibrium, at the optimized conditions. Pseudo-second-order kinetics model describes the adsorption process with a rate constant of 0.1238?g/mg-min. From thermodynamic analysis, it is noted that the adsorption is endothermic and facilitated.     

Removal of nickel from effluents by chelating ion exchange

BACKGROUND: Nickel is a highly toxic metal which is discharged into receiving waters by several industries, in particular, electroplating, PCB and electronics manufacturers. In the present study, a new ion exchanger has been assessed for its ability to remove nickel from solution. RESULTS: By comparing the SSE of different models in the nickel metal ion system, it seems that Redlich‐Peterson isotherm was the best fit model for the three metal ions. But the Langmuir was of a very similar magnitude. The equilibrium sorption capacity has been determined as 2.18 mmol/g and the batch contact time studies have been analyzed and compared using three kinetic models. The rate data were best correlated using the Elovich kinetic model. CONCLUSION: The batch sorption system is a well developed system for the application in the field of water pollution collected in small scale plants. The suitability of a sorbent is determined by the cost, sorption performance and regeneration efficiency. The sorption capacity of resin for nickel metal ions was determined as 2.18 mmol/g. In order to develop a treatment system design it is also important to determine the best kinetic model, Elovich kinetic model, to describe the rate of nickel removal. Copyright © 2008 Society of Chemical Industry