Ring-opening polymerization of <Emphasis Type="SmallCaps">l</Emphasis>-lactide catalyzed by a novel molybdenum-based catalytic system

As a transparent material that can be completely biodegradable, poly(l-lactide) (PL-LA) has recently received considerable attention. In this study, it our first efforts to fabricate l-lactide (L-LA) by a novel molybdenum-based catalytic system consisting of molybdenum pentachloride (MoCl₅) as the main catalyst and m-cresol substituted alkyl aluminum Al(OPhCH₃)(i-Bu)₂ as the co-catalyst. The effects of different types of phosphorus ligands, Al:Mo molar ratios, catalyst contents,catalyst components (separate catalysis of m-cresol aluminum and cocatalysis of Al/Mo system) and polymerization temperature were investigated. The T_g and T_m of the resulting poly(l-lactide) (PL-LA) were characterized by differential scanning calorimetry (DSC), and the molecular weight and molecular weight distribution were determined by gel permeation chromatography (GPC). The GPC results showed that the molecular weight of the PL-LA was higher than that 10⁴ g/mol and the molecular weight distribution was narrow. The structures of PL-LA was detected by ¹H NMR spectroscopy (¹H NMR) and X-ray diffraction (XRD) validation, which demonstrated that a moalr ratio of Mo/Al/l-lactide?=?1:30:1000 showed the higher conversion rate and molecular weight. In comparison to the separate catalysis of m-cresol aluminum, the molecular weight of PL-LA prepared by the cocatalysis of Al/Mo system was slightly improved, and the molecular chains were relatively regular and the crystallinity was higher.     

Thermal behavior of layered perovskite-like compounds in the Bi<Subscript>4</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript>-BiFeO<Subscript>3</Subscript> system

The thermal properties of compounds of the general formula Bi _{m + 1} Fe _{m ? 3} Ti₃O_{3m + 3}, which are layered perovskite-like phases of the Aurivillius type, are investigated as a function of their composition. It is demonstrated that the temperature of decomposition of the Bi _{m + 1} Fe _{m ? 3} Ti₃O_{3m + 3} compounds decreases with an increase in the thickness of perovskite-like layers alternating in the structure and that the composition dependence of the temperature of the structural transition observed in these compounds exhibits a more complex behavior. The linear thermal expansion coefficients of all the compounds under investigation are found to be virtually independent of the composition.     

Crystal structure of Pb<Subscript>6</Subscript>O[(Si<Subscript>6</Subscript>Al<Subscript>2</Subscript>)O<Subscript>20</Subscript>]

The crystal structure of Pb₆O[(Si₆Al₂)O₂₀)] is investigated using X-ray diffraction. The compound has tetragonal symmetry, space group I4/mmm, a = 11.7162(10) Å, c = 8.0435(12) Å, and V = 1104.13(2) ų. The structure is refined to R ₁ = 0.036 for 562 unique reflections with [F ₀] ≥ 4σF. The structure contains two symmetrically independent positions of the Pb²⁺ cations coordinated by five O atoms (Pb²⁺-O^2? = 2.34–2.68 Å). The TO₄ tetrahedra (T = Si, Al) form tubular [(Si₆Al₂)O₂₀] chains extended along the c axis. The O₄ oxygen atom is not bonded to the Si and Al atoms and is octahedrally coordinated by six Pb atoms with the formation of an oxo-centered OPb₆ octahedron. The assumption is made that, in some of lead silicate and aluminosilicate glasses, a number of oxygen atoms are located outside the tetrahedral structure and represent segregation centers of the Pb²⁺ cations due to the formation of oxo-centered complexes.     

Raman spectra and surface structure of CaO-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> glass leached in potassium hydroxide solutions

It is difficult to research on the surface structure of amorphous phase in fly ash during leaching reaction due to crystalline phase and complex structure. In the present work, in order to reveal the effects of leaching reaction on the surface structure of amorphous phase in fly ash, the modelling CaO-Fe₂O₃-Al₂O₃-SiO₂ glass was prepared by the traditional melting methods. The leaching reaction of CaO-Fe₂O₃-Al₂O₃-SiO₂ glass with 7.5 M KOH was investigated by spectroscopy, spectrophotometer and wet chemical method. The results show that the content of Q ¹, Q ², Q ³ and Q ⁴ of glass without corrosion was 4.21, 9.51, 23.03 and 52.55%, respectively, which shows that the network polymerization of glass is compact. The leaching reaction of glass can be described by the following equation: dS/dt = k/(r + S ₀). Leaching in KOH for various times induces the content of Q ⁴ and Q ¹ to be decreased, and Q ² and Q ³ increased, resulted in the depolymerization of network and the surface glass dissolved in alkaline solution to form a gel phase. In stage one of leaching reaction, the rate of iron ion leached from glass surface was slow, which resulted in the small slope of straight-line relationship of leaching curve. In the following stage, the leaching rate of iron ion increased with the prolongation of time.     

Density and microhardness of glasses in the SrO-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> system

The density d at a temperature of 25°C is measured by the hydrostatic weighing method, the Vickers microhardness H _V is determined, and the fluctuation free volume fraction f _g is calculated for glasses in the SrO-B₂O₃-SiO₂ system with a constant strontium oxide content in the range from 35 to 45 mol %. It is demonstrated that the quantities H _V and f _g decrease and the density d increases with an increase in the SrO content.     

Crystal structure and thermal expansion of ammonium pentaborate NH<Subscript>4</Subscript>B<Subscript>5</Subscript>O<Subscript>8</Subscript>

Anhydrous ammonium pentaborate NH₄B₅O₈ has been synthesized by thermal dehydration of larderellite NH₄[B₅O₇(OH)₂] · H₂O at a temperature of 290°C for 7 h. The crystal structure has been determined from the X-ray powder diffraction data: a = 7.58667(5) Å, b = 12.00354(8) Å, c = 14.71199(8) Å, R _p = 6.23, R _wp = 7.98, R _B = 12.7, R _F = 8.95, and β-KB₅O₈ structure type. The double interpenetrating framework is formed by pentaborate groups, each consisting of a boron-oxygen tetrahedron and four triangles, in which all oxygen atoms are bridging. The thermal behavior of the NH₄B₅O₈ compound has been investigated using thermal X-ray diffraction. As for other pentaborates of this type, the thermal expansion of the NH₄B₅O₈ compound is anisotropic and reaches a maximum along the a axis. The thermal expansion coefficients are as follows: α _a = 39 × 10^?6, α _b = 6 × 10^?6, α _c = 20 × 10^?6, and α _V = 65 × 10^?6 °C^?1.     

Modeling Self-Organization Processes in Crystal Forming Systems. Symmetry and Topology Codes of Cluster Self-Assembly of Crystal Structure of Na<Subscript>44</Subscript>Tl<Subscript>7</Subscript> (Na<Subscript>6</Subscript>Tl)

The geometrical and topological analysis of the crystal structure of intermetallide Na₄₄Tl₇ (Na₆Tl, a = 24.154 Å, V = 14091.8 ų, space group F-43m) is carried out. The algorithms of the combinatorial-topological analysis, which ensure the recovery of the symmetrical and topological code (program) of the cluster self-assembly of the crystal structure of an intermetallide, are developed. The topological type of the basic 3D network for two types of cluster precursors corresponds to a simple cubic 3D network P _c with CN = 6 and basic 2D network of type 4⁴. There are eight cluster precursors in the unit cell: four K86 and four K50. The cluster precursor K86 made from 86 atoms is formed from eight icosahedra i-TlNa₁₂ linked by the apices. The center of the cluster precursor K86 is at the position 4a (0, 0, 0) with the point symmetry g = –43m. The 50-atomic cluster precursor K50 consists of six i-TlNa₁₂ icosahedra. The center of the cluster precursor K50 is in the partial position 4b (0, 0, 0) with the point symmetry g = –43m. The symmetrical and topological codes of the self-assembly of 3D structures from nanocluster precursors K86 and K50 are reconstructed in the following form: primary chain → microlayer → microframework.     

Synthesis and crystal structure of the low-temperature modification of Li<Subscript>12</Subscript>Zn<Subscript>4</Subscript>(P<Subscript>2</Subscript>O<Subscript>7</Subscript>)<Subscript>5</Subscript>

The crystal structure of a low-temperature modification of the Li₁₂Zn₄(P₂O₇)₅ compound has been determined by full-profile analysis from the X-ray powder diffraction data. The compound crystallizes in the monoclinic crystal system (a = 5.130(1) Å, b = 13.454(1) Å, c = 8.205(1) Å, β = 90.36(1)°, space group P2₁/n, Z = 4) and has a framework structure in which the zinc and lithium atoms statistically occupy equivalent positions.     

Effect of Cu promoter and alumina phases on Pt/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> for propane dehydrogenation

We investigated the effects of different Cu weight ratio on θ or γ-Al₂O₃ which were impregnated with platinum in terms of catalytic activity for propane dehydrogenation and physicochemical properties. 1.5 wt% Pt, 0-10 wt% Cu catalyst supported on θ-Al₂O₃ or γ-Al₂O₃ was prepared by incipient wetness co-impregnation. Enhanced Pt dispersion by increasing Cu contents in γ-Al₂O₃ supported catalyst was confirmed via XRD and XPS. Pt and CuO was separated in Pt-Cu/θ-Al₂O₃, but Pt-Cu alloy was identified after reduction treatment. Also, adding Cu in Pt/Al₂O₃ makes catalyst’s acidity lower and this property led to increased propylene yield in propane dehydrogenation. However, Pt₃Cu was not good for yield of PDH, which was confirmed in Pt-10Cu/θ-Al₂O₃ through XRD.     

Solution-Combustion Synthesis of LiNi<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> as a Cathode Material for Lithium-Ion Batteries

A cathode material for lithium-ion batteries–LiNi_1/3Co_1/3Mn_1/3O₂–was prepared by solution combustion synthesis and characterized by XRD, SEM, and galvanostatic charge/discharge cycling. The sample calcined at 950°C for 10 h showed best charge/discharge performance. An initial discharge capacity (C) of 150.5 mA h g^–1 retained 95.7% of its value after 75 charge/discharge cycles at I_c = 14 mA g^–1 (0.2C rate), I_d = 70 mA g^–1 (0.5C rate).     

Cluster Self-Organization of Intermetallic Systems: Two-Layer Quasi-Spherical Nanocluster Precursors K69 and K26 in the Crystal Structure of Li<Subscript>26</Subscript>Na<Subscript>58</Subscript>Ba<Subscript>38</Subscript> (<Emphasis Type="Italic">cF</Emphasis>488)

The geometric and topological analysis of the crystal structure of intermetallic Li₂₆Na₅₈Ba₃₈ (cF488, a = 27.335 Å, V = 20 424 ų, F-43m) is carried out using computer methods (ToposPro software package). The analysis method is based on determining the chemical composition and structure of an intermetallic cluster precursor and constructing a basic 3D network of the structure in the form of a graph whose nodes correspond to the position of their centers of gravity. Using the method of the complete decomposition of the 3D factor graph of the crystal structure into cluster substructures, we find two types of framework-forming nanoclusters, namely, K69 of the 1@16@52 composition and K26 of the 0@4@22 composition with point symmetry g =–43m. The symmetric and topological code of self-assembly of 3D structures from nanocluster precursors is reconstructed in the following form: primary chain → microlayer → microframework. Clusters Ba5, Na₆(Na₄), and Na₂В are determined as spacers occupying voids in the 3D framework of nanoclusters K69 and K26.     

Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles coated by new functionalized tetraaza-2,3 dialdehyde micro-crystalline cellulose: synthesis,characterization, and catalytic application for degradation of Acid Yellow 17

In this study, we developed an original approach for preparing cellulose-coated magnetite nanoparticles (NPs). Two novel Schiff bases (PDA-g-DAC) and [Bz-(PDA-g-DAC)] were synthesized via condensation reactions of periodate oxidized micro-crystalline cellulose (DAC) with o-phenylene diamine (PDA) to obtain its azomethine derivative with 85% yield. Subsequently, the functionalization of (PDA-g-DAC) with benzil (Bz) yields the tetraaza macrocycle [Bz-(PDA-g-DAC)]. The physicochemical characterization of the condensation products was performed using ¹³CNMR, FTIR, ATG, DSC, and X-ray diffraction techniques. Magnetic nanomaterial-based Schiff base cellulose was successfully prepared using in situ chemical co-precipitation of coordinated ferric and ferrous ions in cellulose Schiff base matrix under optimized conditions, and then, its magnetic properties were characterized. The results demonstrated that the Fe₃O₄ NPs coated with [Bz-(PDA-g-DAC)] were homogeneously coated in the matrix under ultrasonic irradiation with the saturation magnetization of 69.50 emu g^?1. In addition, XRD line broadening analysis showed that the average particle size of the NPs was 37.3 nm. Furthermore, FTIR spectra demonstrated that [Bz-(PDA-g-DAC)] concavity was anchored to magnetite Fe₃O₄ NPs through azomethine groups. Vibrating sample magnetometry (VSM) of [Bz-(PDA-g-DAC)@Fe₃O₄] magnetic nanocomposite samples showed the typical behavior of ferromagnetism. This study provided a green and facile method to inhibit magnetic nanoparticle aggregation. Activity results revealed that the prepared [Bz-(PDA-g-DAC)@Fe₃O₄] catalyst shows the maximum activity for degradation of Acid Yellow 17 (AY17) compared to other prepared catalysts. After degradation reaction, the [Bz-(PDA-g-DAC)@Fe₃O₄] catalyst was recovered from the reaction mixture via an external magnet and used for further five consecutive cycles with excellent catalytic activity, successively, which was comparable to the fresh catalyst. The catalyst degradation efficiency and its easy separation exhibited that [Bz-(PDA-g-DAC)@Fe₃O₄] catalyst is a promising material for the removal of AY17 from aqueous solutions in green chemistry perspectives.     

SHS of Y<Subscript>2</Subscript>Ti<Subscript>2</Subscript>O<Subscript>7</Subscript>-based mineral-like ceramics: Influence of green density

Explored was the influence of compacting pressure (P) and green density (ρ) on the properties of Zr-doped mineral-like pyrochlore ceramics Y₂(Ti_{1 – x} Zr _x )₂O₇ (x ≤ 0.3) prepared by SHS method. The optimal ρ values that provide minimal porosity and maximal mechanical strength of synthesized ceramics were found. An increase in ρ was found to decrease combustion temperature and increase pyrochlore lattice parameter a. Green density was also found to affect phase composition of the SHS-produced ceramics under study.     

Synthesis and crystal structure of a new oxohalide CdPb<Subscript>2</Subscript>O<Subscript>2</Subscript>Cl<Subscript>2</Subscript>

A new compound, CdPb₂O₂Cl₂, is synthesized by the method of solid-phase reactions. The compound has monoclinic symmetry, space group C2/m, a = 12.392(8) Å, b = 3.8040(14) Å, c = 7.658(5) Å, β = 122.64(5)°, and V = 304.0(3) ų. The structure contains one symmetrically independent position of the Pb²⁺ cation coordinated by three O^2? anions (Pb²⁺-O^2? = 2.29–2.34 Å) and five Cl^? anions (Pb²⁺-Cl^? = 3.35–3.57 Å). The Cd²⁺ cation has a symmetric coordination with the formation of two bonds Cd-O = 2.15 Å and four bonds Cd-Cl = 2.73 Å. The oxygen atom is tetrahedrally coordinated by three Pb²⁺ cations and one Cd²⁺ cation, which leads to the formation of oxo-centered heterometallic OPb₃Cd tetrahedra. The tetrahedra are linked together into chains through common Pb atoms and into layered complexes due to sharing of the equatorial Cd atoms. The chlorine atoms are located above the cavities of the oxo-centered layer.     

Dielectric study of side-chain liquid crystalline polyazomethine/fullerene C<Subscript>60</Subscript> nanocomposite

For side-chain liquid crystalline polyazomethine/fullerene C₆₀ nanocomposite (C₆₀ loading is 0.25 wt%), both real and imaginary components of the dielectric permittivity were investigated in wide regions of temperature and frequency. Analysis of frequency dependent permittivity allowed finding three relaxations (α, β ₁ and β ₂) in the nanocomposite. They were attributed to specific modes of molecular mobility. β-relaxations were described with the Arrhenius equation, whereas α-relaxation was described with the Vogel-Fulcher-Tammann equation. Anti-plasticization effect of the C₆₀ doping was shown to be manifested as an increase of the glass transition temperature of the nanocomposite as compared with that of the neat polymer.     

Maxima of the Specific Heat at Constant Pressure of the <Emphasis Type="Italic">n</Emphasis>-Alkanes C<Subscript>7</Subscript>-C<Subscript>9</Subscript> in the Supercritical Region

Precision measurements of the specific heat at constant pressure, C _p , of high-purity samples of the normal alkanes C₇-C₉ in the supercritical region of state parameters are carried out using an adiabatic flow calorimeter equipped with a calorimetric flowmeter. Currently, this is the most accurate method. The coordinates of maxima of C _p on isobars are determined. A generalized equation for the line of the maxima of C _p in reduced coordinates π-τ and an equation for C _p along this line in corresponding states for the homologous series are obtained in terms of thermodynamic similarity theory using the most reliable published data. Existing experimental methods for determining the critical parameters of individual substances are analyzed.     

Stability of polymer structures based on fullerene C<Subscript>60</Subscript> under their oxidation with oxygen

A comparative study of the oxidative destruction of the monomer face-centered cubic (FCC) lattice and various polymer [dimeric (D), orthorhombic (O), tetragonal (T), and rhombohedral (R)] phases of C₆₀ in an atmosphere of oxygen has been performed in the temperature range of 100–500°C with the use of a flow microunit connected to a gas chromatograph. From direct measurements of the content of CO₂ in the gaseous products of destruction, the temperature dependences of oxidation rates are measured for the materials under study. It has been established that, with respect to stability against oxidative destruction, different forms of C₆₀ may be arranged as follows: the monomer FCC phase of C₆₀ > D > O > T > R. The reasons behind this tendency are discussed.     

Synthesis of Titanates with a Ramsdellite-Type Tunnel Structure Crystallizing in the Li<Subscript>2</Subscript>O-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-TiO<Subscript>2</Subscript> System in Different Gaseous Media

The ramsdellite-type phases crystallizing in the Li₂O-Fe₂O₃-TiO₂ system in the course of synthesis in gaseous media at different oxygen partial pressures are studied. Solid solutions based on the ramsdellite structure with the composition Li₂Ti_3?xFe _x O_{7 ? δ} (0 ≤ x ≤ 0.7) are prepared in an oxidizing medium (P_O2 = 1 atm) for the first time. Analysis of the results obtained by electron paramagnetic resonance and Mossbauer spectroscopy revealed that, in these solid solutions, all iron ions are in the oxidation state Fe⁺³.     

AC Conductivity and Dielectric Behavior of Silicophosphate Glass Doped by Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>

Silicophosphate glasses of nominal composition (P₂ O ₅ 50%-SiO₂ 30%-Na₂O 20%) and Nd₂ O ₃ additive (0.5 and 2 wt%) were prepared and dielectric behavior has been studied over a temperature range (302–483 K) in the frequency range (0.5 - 3243 kHz). Frequency dependence of AC conductivity (σ _ac), has been explored using the universal power law. Disparity of the frequency exponent (s) with temperature was examined in terms of diverse conduction mechanisms. The principal conduction mechanisms were found correlated to both barrier hopping (CBH) and quantum mechanical tunneling (QMT) models. Temperature dependence of σ _ac (ω) showed a linear increase with different frequencies. In addition, the capacitance, loss tangent, dielectric loss and dielectric constant were calculated over variable temperature ranges and frequencies.     

Preparation of Ti<Subscript>2</Subscript>AlN by reactive sintering

Reactive sintering of 2Ti–AlN mixtures at T = 1300°C for τ = 2 h in an argon atmosphere was used to prepare Ti₂AlN containing below 1 wt % TiN and exhibiting a laminate structure typical of MAX compounds. At lower values of T and τ, the TiN content of products increased. Sintering in vacuum yielded a material containing up to 20 wt % TiN. Contrary to our expectations, mechanical activation of green blends was found to increase the TiN content of sintered materials, due to intensification of thermal dissociation of AlN and elimination of Al, which shifts equilibrium toward two-phase Ti₂AlN–TiN composite. Relative density of green compacts was found to produce little or no influence on phase composition of products.