Kinetic study of radical polymerization. III. Solution polymerization of acrylamide by 1H‐NMR

Solution and radical polymerization of acrylamide in the presence of potassium persulfate in D₂O was investigated up to high conversion by high‐field ¹H‐NMR spectroscopy. The kinetics of reaction was studied according to the data obtained from the corresponding spectra at various times during the polymerization reaction progress. Processing of the data led us to derive the rate equation of this polymerization reaction and determine the reaction order of each component in the rate equation. The order, with respect to initiator, was consistent with the classical kinetic rate equation (0.45), whereas the order with respect to monomer was greater than unity (1.49). The effect of temperature on the polymerization rate was also investigated and the activation energy of 48.4 kJ mol^?1 was obtained over the temperature range of 60–75°C. Also some mechanistic studies were discussed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2007–2013, 2004     

Novel N‐ethyl‐2‐styrylquinolinium iodides as sensitizers in the photoinitiated free‐radical polymerization of trimethylolopropane triacrylate. II

Results of kinetic studies of two‐component photoinitiator systems used in the visible‐light photoinduced polymerization of 2‐ethyl‐2‐(hydroxymethyl)‐1,3‐propanediol triacrylate are presented. Nine different styrylquinolinum dyes coupled with n‐butyltriphenylborate as a coinitiator have been used as photoinitiating systems. Reactive radicals that initiate the polymerization are formed by the well‐known mechanism of photoinduced electron transfer between dye cations acting as electron acceptors and borate anions acting as electron donors. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Kinetic study of the free‐radical polymerization of vinyl acetate in the presence of deuterated chloroform by 1H‐NMR spectroscopy

The free‐radical polymerization of vinyl acetate was performed in the presence of deuterated chloroform (CDCl₃) as a chain‐transfer agent (telogen) and 2,2′‐azobisisobutyronitrile as an initiator. The effects of the initiator and solvent concentrations (or equivalent monomer concentration) and the reaction temperature on the reaction kinetics were studied by real‐time ¹H‐NMR spectroscopy. Data obtained from analysis of the ¹H‐NMR spectra were used to calculate some kinetic parameters, such as the initiator decomposition rate constant (k_d), k_p(f/k_t)^1/2 ratio (where k_p is the average rate constant for propagation, f is the initiator efficiency, and k_t is the average rate constant for termination), and transfer constant to CDCl₃ (C). The results show that k_d and k_p(f/k_t)^1/2 changed significantly with the solvent concentration and reaction temperature, whereas they remained almost constant with the initiator concentration. C changed only with the reaction temperature. Attempts were made to explain the dependence of k_p(f/k_t)^1/2 on the solvent concentration. We concluded from the solvent‐independent C values that the solvent did not have any significant effect on the k_p values. As a result, changes in the k_p(f/k_t)^1/2 values with solvent concentration were attributed to the solvent effect on the f and/or k_t values. Individual values of f and k_t were estimated, and we observed that both the f and k_t values were dependent on the solvent (or equivalent monomer) concentration. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Kinetic study of the polymerization of dimethyldiallylammonium chloride and acrylamide

The kinetics of the polymerization of dimethyldiallylammonium chloride (DMDAAC) and acrylamide (AM) with different monomer molar ratios initiated by an ammonium persulfate–sodium bisulfate redox complex in an aqueous solution were studied. The polymerization rate (R_p) equation, the activation energy (E_a), and the reactivity ratio were measured. The results show that when the n_DMDAAC:n_AM values were 1 : 9, 2 : 8, 3 : 7, 4 : 6, and 5 : 5, the copolymerization rate equation were R_p1 = k[M]^2.61[I_O]^0.51[I_R]^0.52, R_p2 = k[M]^2.70[I_O]^0.50[I_R]^0.53, R_p3 = k[M]^2.73[I_O]^0.50[I_R]^0.56, R_p4 = k[M]^2.77[I_O]^0.51[I_R]^0.59, and R_p5 = k[M]^2.84[I_O]^0.51[I_R]^0.61 (where [M] is the total monomer concentration, [I_O] is the oxidant concentration, and [I_R] is the reductant concentration), respectively when the temperature was 45°C. The E_a values were E_a1 = 79.10 kJ/mol, E_a2 = 81.39 kJ/mol, E_a3 = 85.15 kJ/mol, E_a4 = 88.88 kJ/mol, and E_a5 = 90.61 kJ/mol in the temperature range 35–55°C, respectively. The reactivity ratios of DMDAAC and AM were r_DMDAAC = 0.14 and r_AM = 6.11 when the temperature was 45°C. The structure of PDA was characterized by Fourier transform infrared spectroscopy and ¹H-NMR. The results of the kinetic parameters explained the differences in the copolymerization rate and intrinsic viscosity of PDA with different cationicities. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Applicability of hemicyanine phenyltrialkylborate salts as free‐radical photoinitiators in the visible‐light polymerization of acrylate

The photoinitiation ability of photoredox pairs composed of a hemicyanine dye cation and different borate anions for the radical polymerization of 2‐ethyl‐2‐(hydroxymethyl)‐1,3‐propanediol triacrylate was investigated. In such a system, the excited dye chromophore is reduced by different tetraorganylborate anions. Upon irradiation at 488 nm, reductive carbon–boron bond cleavage occurs, producing reactive radicals, which start the chain reaction. The efficiency of bond‐breaking processes was found to be dependent on the nature of both the acceptors and the donors. The experimental results show that the photoinitiating ability of the tested photoredox pairs were controlled by both the driving force of the electron‐transfer process between the electron donor and the electron acceptor and the reactivity of the free radical that resulted from the secondary reactions occurring after the photoinduced electron‐transfer process. Using the nanosecond flash photolysis method, we studied the spectral and kinetic characteristics of the triplet state of cyanine dye and determined the rate constants of the triplet quenching by phenyltrialkylborate salts. The results obtained show that the tetramethylammonium phenyl‐tri‐n‐butylborate (TB7) has a faster electron‐transfer rate than the tetramethylammonium n‐butyltriphenylborate (TB2) salt, which bore only one butyl group attached to the boron. The relative initiator efficiency of the triphenylbutylborate salts, as compared to the corresponding phenyltrialkylborate salts with a common chromophore, was determined. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Kinetic study of the polymerization of ethyl acrylate in an aqueous nitric acid medium

A kinetic study of the aqueous polymerization of ethyl acrylate (EA) was carried out at 30°C in a dilute nitric acid medium with ammonium ceric nitrate (ACN)–n‐propanol (nPA) and ACN–ethanol as redox initiator systems. The ceric‐ion consumption was first‐order with respect to the ceric‐ion concentration with both initiator systems. The formation of complexes between Ce(IV) and reducing agents was observed. The orders with respect to the Ce(IV), reducing agents, and monomer were evaluated for aqueous polymerizations of EA initiated by Ce(IV)–nPA and Ce(IV)–ethanol redox initiator systems. The overall activation energy for the aqueous polymerization of EA was evaluated in the temperature region of 27–40°C with both initiator systems. A kinetic mechanism for the aqueous polymerization of EA initiated by redox initiator systems is presented. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 218–224, 2006     

Kinetic study of the thermal decomposition of (2‐phenyl‐1,3‐dioxolane‐4‐yl) methyl methacrylate and 2‐hydroxyethyl methacrylate copolymers

The kinetics of nonisothermal decomposition of (2‐phenyl‐1,3‐dioxolane‐4‐yl) methyl methacrylate (PDMMA), 2‐hydroxyethyl methacrylate (HEMA), and vinyl‐pyrrolidone (VPy) copolymers were investigated by thermogravimetry (TG) and differential thermal analysis (DTA). The data indicated that the major weight loss occurs in the range of 270 to 450°C. The decomposition characteristics showed essentially two regimes and varied depending on the temperature and the copolymer composition. The apparent kinetic parameters of the decompositions were estimated from both TG and DTA data by using the alternative calculation methods. The results suggest that the weight loss rates may be represented, depending on the type of sample, by a reaction model of overall order 1.0 to 1.6, with an activation energy of approximately 65–95 kJ mol^?1. The DTA data estimated considerably higher values for the overall activation energies, around 198–240 kJ mol^?1. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1500–1508, 2005     

Asymmetric cyanine dyes as fluorescence probes and visible‐light photoinitiators of free‐radical polymerization processes

This article introduces asymmetric cyanine dyes employed as visible‐light photoinitiators of vinyl monomer polymerization and as fluorescence probes monitoring the progress of polymerization. A degree of polymer cure from the measurement of the changes in the probe emission intensity and position shifts during the thermally initiated polymerization of monoacrylate was obtained. A distinct increase in the intensity of the probe fluorescence was observed during polymerization when the degree of monomer conversion was gradually increasing. This effect was accompanied by a blue‐shift of the probe emission maxima. The second part of this work is focused on the possibility of an application of the tested dyes, in combination with borate anions, as photoinitiating systems. The kinetics of polymerization of trimethylolpropane triacrylate, with cyanine borates as photoinitiators, was studied by a microcalorimetric method. Asymmetric cyanine borates were found to be effective photoinitiators, and both the initiator and coinitiator concentration as well as the light intensity strongly affected the progress of photopolymerization, leading, for example, to an increase in the polymerization rate. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 207–217, 2006     

Synthesis and photopolymerization of 2‐(acryloyloxy)ethyl piperidine‐1‐carboxylate and 2‐(acryloyloxy)ethyl morpholone‐4‐carboxylate

Two low‐viscosity monomers, 2‐(acryloyloxy)ethyl piperidine‐1‐carboxylate (AEPC II) and 2‐(acryloyloxy)ethyl morpholone‐4‐carboxylate (AEMC), were synthesized with a non‐isocyanate route. The photopolymerization kinetics was monitored by real‐time infrared spectroscopy with a horizontal sample holder. The results indicated that AEPC II and AEMC had high ultraviolet curing rates and final double‐bond conversions, which could reach 90 and 95%, respectively. The glass‐transition temperatures of AEPC II/urethane acrylate resin (1/4 w/w), AEMC/urethane acrylate resin (1/4 w/w), and isobornyl acrylate/urethane acrylate resin (1/4 w/w) mixtures were 37.5, 45.6, and 57°C, respectively. The crosslink density of the AEMC/urethane acrylate resin (1/4 w/w) mixture was lower than that of the isobornyl acrylate/urethane acrylate resin (1/4 w/w) mixture. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Using 1H‐NMR spectroscopy for the kinetic study of the in situ solution free‐radical copolymerization of styrene and ethyl acrylate

The free‐radical copolymerization of styrene and ethyl acrylate in benzene‐d₆ as the solvent in the presence of benzoyl peroxide as an initiator at 70°C was studied by online ¹H‐NMR spectroscopy. The chemical composition of the copolymer at different reaction times was calculated from the conversion of the monomers to the copolymer, and then the reactivity ratios of styrene and ethyl acrylate were determined at both low and high conversions. Data for the overall monomer conversion versus the time were used to estimate the ratio k_pk_t^?0.5 for different compositions of the initial feed (k_p is the propagation rate constant, and k_t is the termination rate constant). k_pk increased with an increasing molar fraction of ethyl acrylate in the initial feed. The monomer mixture and copolymer compositions versus the overall monomer conversion were calculated with the data of ¹H‐NMR spectra. The incorporation of the styrene monomer into the copolymer structure was more favored than that of the ethyl acrylate monomer. Reducing the molar fraction of styrene in the initial feed intensified this. Drawing the molar fraction of styrene (or ethyl acrylate) in the copolymer chains versus that in the initial feed showed a tendency of the system toward random copolymerization. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Novel Reaction Kinetic Model for Anionic Polyamide‐6

Semi‐adiabatic temperature measurements are recorded and used to define semi‐empirical equations for the simulation and prediction of the anionic polyamide‐6 (APA‐6) reaction kinetics. The resin mixture used has a long infusion window before the reaction starts. The prediction of the induction time and its corresponding initial temperature of reaction is explored. By means of this semi‐empirical approach and an optimised fitting procedure, the reaction kinetics of APA‐6 can successfully be described. The adiabatic polymerisation can be predicted on the basis of an autocatalytic Kamal‐Sourour model for thermoset resins, and the crystallisation can be described using the isothermal crystallisation model.

     

New aspects of viscosity effects on the photopolymerization kinetics of the 2,2‐bis[4‐(2‐hydroxymethacryloxypropoxy)phenyl]propane/triethylene glycol dimethacrylate monomer system

The photopolymerization kinetics and viscosity behavior of 11 2,2‐bis[4‐(2‐hydroxymethacryloxypropoxy)phenyl]propane/triethylene glycol dimethacrylate mixtures were investigated. The viscosity was studied at six temperatures (20–70°C), and the activation energies for the viscosity were determined. The excess logarithm viscosities were calculated and found to be negative over the whole composition and temperature ranges; they were fitted to the Redlish–Kister polynomial equation. The kinetic analysis of the photopolymerization was carried out at three polymerization temperatures (20, 40, and 60°C). The results proved the existence of the most reactive composition (reaching the highest value of the maximum polymerization rate), but the ratio of the monomers in this composition, close to equimolar, showed a tendency to change with the polymerization temperature. The viscosities of the most reactive compositions lay in the range of about 0.1–1.2 Pa s, which was narrow in comparison with the range of viscosities of all the compositions used in the kinetic studies (from 3 × 10^?3 to 1.5 × 10³ Pa s). The activation energies for the polymerization rates were calculated and correlated with the viscosity changes. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Curing kinetics and structural changes of a of di[(N‐m‐acetenylphenyl) phthalimide] ether/[(methyl) diphenylacetylene] silane copolymer

Differential scanning calorimetry, Fourier transform infrared (FTIR) spectroscopy, and ¹³C‐NMR were used to characterize the curing kinetics and structural changes of a copolymer of di[(N‐m‐acetenylphenyl) phthalimide] ether (DAIE) and [(methyl) diphenylacetylene] silane (MDPES). The results show that the apparent activation energy (E) and reaction order (n) calculated according to the Kissinger method were nearly the same as those calculated according to the Ozawa method. E was 160.4 kJ/mol and n was 0.96 with the Kissinger method, and E was 158.1 kJ/mol and n was 0.95 with the Ozawa method. The FTIR and solid‐state ¹³C‐NMR results also indicate that with increasing curing temperature, the peaks assigned to Si? H and C?C bonded to phenylene carbons decreased, broadened, and finally vanished, whereas the peaks assigned to the C?C carbons and phenyl carbons increased and broadened. Crosslinking reactions in the curing of the DAIE/MDPES copolymer were possible due to the hydrosilylation reaction and the Diels–Alder reaction. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2126–2130, 2006     

Synthesis of liquid crystalline polymers from polyethylene terephthalate and 4‐acetoxybenzoic acid: A kinetic study

Liquid crystalline polymers (LCPs) have been synthesized from polyethylene terephthalate (PET) and 4‐acetoxybenzoic acid (OB) through melt step‐growth polymerization. The presence of liquid crystalline texture is first examined using optical polarizing microscopy. The thermal durability of the developed systems is studied through thermogravimetric analysis. The kinetics of the polymerization processes is analyzed. The effectiveness of three catalysts commonly used in polyesterification is investigated. The effect of reaction temperature is also examined. The progress of polycondensation reactions over time takes a nonlinear behavior of slight sigmoidal shape, irrespective of whether or not the reaction is catalyzed. Simple second and third order equations, along with a nonlinear model, are used to determine the kinetic parameters characterizing these reactions. The rate of reaction is enhanced when the reaction temperature is increased. Overall, second‐order kinetics well describes the polymerization reactions when the data set is divided into two regions. Antimony trioxide induces a more visible enhancement to the rate of reaction, compared to zinc acetate and sodium acetate. The presence of a catalyst generally increases the reaction activation energy. This indicates that entropy factors outweigh the increase in activation energy and drive the catalyzed reactions to completion. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Effect of oxygen on the crosslinking and mechanical properties of a thermoset formed by free‐radical photocuring

In this article, we report on the formation of optically transparent photopolymer films from hexanediol diacrylate (HDDA) by inkjet printing, where droplets of monomer approximately 5 μm in diameter were deposited onto a surface. The films were cured by irradiation with a UV‐light‐emitting‐diode light source. It was found that the inkjet‐printed HDDA films picked up a considerable amount of absorbed O₂ during printing. Exposure to increasing amounts of O₂ during photocuring severely restricted both the degree of conversion and the UV dose required for gelation in proportion to the O₂ concentration. Viscoelastic property data indicated that exposure to reduced oxygen concentrations during thermal postcuring (dark reaction) resulted in linear trends of increasing modulus above the glass‐transition temperature (T_g) and increasing T_g itself. Thus, the final crosslink density was greater in fully cured samples that were exposed to atmospheres with increasing inert gas concentrations. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Photoinitiating free‐radical polymerization electron‐transfer pairs applying amino acids and sulfur‐containing amino acids as electron donors

A series of free‐radical polymerization initiation systems, based on xanthene dyes as the absorbing chromophores [Rose bengal derivative, 3‐(3‐methylbutoxy)‐5,7‐diiodo‐6‐fluorone and 3‐acetoxy‐2,4,5,7‐tetraiodo‐6‐fluorone] and sulfur‐containing amino acids as the electron donors, were investigated. The photoredox pair xanthene dye/sulfur‐containing amino acid was effectively used for photoinitiation of free‐radical polymerization of the mixture composed of poly(ethylene glycol)diacrylate–1% NH₄OH (3 : 1). The highest initiating efficiencies were observed for the system composed of methionine derivatives as the electron donor. The mechanism of photoinduced electron transfer between sulfur‐containing amino acids and triplet state of xanthene dye was investigated using laser‐flash and steady‐state photolysis techniques. Based on photochemistry of xanthene dyes, photochemistry of sulfur‐containing amino acids, and obtained results, the mechanism describing the major processes occurring during the photoinitiated polymerization by a photoinduced intermolecular electron‐transfer process was postulated. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 358–365, 2005