Photocatalytic degradation of 2,2‐bis(4‐hydroxy‐3‐methylphenyl) propane (BPP) based on molecular recognition interaction

BACKGROUND: Endocrine disruptors in the aquatic environment and their potential adverse effects are currently issues of concern. One of these endocrine disruptors is 2,2‐bis(4‐hydroxy‐3‐methylphenyl)propane (BPP). In this work the molecular recognition interaction of BPP with β‐cyclodextrin (β‐CD) was studied using IR spectroscopy and steady state fluorescence spectroscopy, and the photocatalytic degradation behaviour of BPP based on molecular recognition interaction was investigated in a TiO₂/UV–visible (λ_max = 365 nm) system. This might provide a new method for the treatment of some organic pollutants in wastewater. RESULTS: β‐CD reacts with BPP to form a 1:1 inclusion complex, the formation constant of which is 4.94 × 10³ L mol^?1. The photodegradation rate constant of BPP after molecular recognition by β‐CD showed a 1.42‐fold increase in the TiO₂/UV–visible (λ_max = 365 nm) system. The photodegradation of BPP depended on the concentration of β‐CD, the pH value, the gaseous medium and the initial concentration of BPP. The photodegradation efficiency of BPP with molecular recognition was higher than that without molecular recognition. After 100 min of irradiation the mineralisation efficiency of BPP after molecular recognition by β‐CD reached 94.8%, whereas the mineralisation efficiency of BPP before molecular recognition by β‐CD was only 40.6%. CONCLUSION: The photocatalytic degradation of BPP after molecular recognition by β‐CD can be enhanced in the TiO₂/UV‐visible (λ_max = 365 nm) system. This enhancement is dependent on the enhancement of the adsorption of BPP, the moderate inclusion depth of BPP in the β‐CD cavity and the increase in the frontier electron density of BPP after molecular recognition. Copyright © 2008 Society of Chemical Industry     

Epoxy‐Based Azopolymers with Enhanced Photoresponsive Properties Obtained by Cationic Homopolymerization

Azopolymers are highly versatile materials due to their unique photoresponsive properties. In this contribution, a novel azo‐modified epoxy network is synthesized by cationic homopolymerization with boron trifluoride monoethylamine (BF₃.MEA) complex as initiator. The effect of the addition of a fixed content of amino‐functionalized azo chromophore, Disperse Orange 3, into the polymer matrix is studied in detail. First of all, the thermal curing cycle is optimized by means of differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR) measurements. Then, the resulting bulk azo‐modified epoxy networks are characterized by means of thermogravimetric analysis (TGA), FTIR, DSC, UV–vis spectroscopy, and rheological measurements. Finally, the optical response of thin films of these materials is determined. The results evidence that azo‐modified epoxy networks obtained by cationic polymerization with optimized curing cycle display high T _g values, high maximum photoinduced birefringence, fast writing speed, and exceptionally high remnant anisotropy. Therefore, this material is a promising candidate to be used for optical storage applications.     

Synthesis and characterization of tetrakis‐ derivatives of bisphenol‐A with 4‐phenylazoaniline and 5‐(4‐aminophenylazo)‐25,26,27‐tribenzoyloxy‐ 28‐hydroxycalix[4]arene

The synthesis of tetrakis‐ derivatives of bisphenol‐A containing azo groups at their 2,2′,6,6′‐positions is reported. Novel examples of bisphenol‐A, coupled with diazonium salts and derived from 4‐phenylazoaniline and 5‐(4‐aminophenylazo)‐25,26,27‐tribenzoyloxy‐28‐hydroxycalix [4]arene, have been synthesized. It has been observed that the coupling reaction of diazonium salt obtained from 4‐phenylazoaniline with bisphenol‐A gives tetrakis‐ while those derived from 5‐(4‐aminophenylazo)‐25,26,27‐tribenzoyloxy‐28‐hydroxycalix [4]arene give partially substituted bisphenol‐A analogues. The newly prepared tetrakis‐azo substituted bisphenol‐A compounds ( 1 and 2 ) are characterized by using UV‐vis, FT‐IR, ¹H‐NMR spectroscopic methods as well as elemental analysis techniques. These azo compounds give rise to bathochromic shifts in the absorption spectra, which can even be detected by “naked eye.” © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Development of ZrO2‐MgO nanocomposite powders by the modified sol‐gel method

The ZrO₂‐MgO nanocomposites were synthesized using a new sol‐gel method with sucrose and tartaric acid as a gel agent. The samples were characterized by thermal analysis (TG/DTA), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), energy‐dispersive X‐ray mapping (EDX mapping), and Ultraviolet‐visible spectroscopy (UV‐vis). The results showed that the cubic phase of ZrO₂‐MgO was formed in the presence of both gel agents. The average particle size of the samples synthesized with sucrose was lower (30 nm) than that of tartaric acid (50 nm). Finally, the formation mechanism and the optical properties of zirconia‐magnesia have been discussed.     

UV‐visible absorption and photoluminescence characteristics of SnO2 nano‐tube/wire arrays fabricated by LPD method

In this study, SnO₂ nano‐tube/wire arrays with a diameter in the range of 90‐120 nm and several micrometers in length were synthesized by the liquid phase deposition (LPD) method. The study of structural properties was performed by XRD, Raman and TEM, while the optical properties were measured using UV‐visible absorption and photoluminescence spectroscopy. The Raman spectra of the nano‐tubes/wires revealed the presence of 5 vibration peaks assigned to the tetragonal rutile SnO₂ structure in agreement with the XRD results. The estimated optical direct band gap from UV‐visible absorption spectra was found to be 3.73‐3.88 eV. The observed blue shift of the optical band gap can be explained by the higher formation of mesoporous particles on the exposed surface to the photons. The photoluminescence (PL) spectra of the nano‐tubes/wires exhibited a rather broad and intense emission band centered at around 560‐569 nm.     

Syntheses of an azo‐group‐bound silica initiator and silica–polystyrene composites

In this article, we present a facile method for the synthesis of an azo‐group‐bound silica (SiO₂–azo) initiator. The azo groups were introduced onto the surface of silica (SiO₂) nanoparticles via facile condensation between 4,4′‐azobis‐4‐cyanopentanoic acid and the alkyl–hydroxyl groups ‐ immobilized on the SiO₂ nanoparticle surface under ambient conditions. The polystyrene (PS) chains were grafted onto the SiO₂ nanoparticle surface by in situ polymerization with the resulting SiO₂–azo as an initiator, and then, the SiO₂–PS composite was prepared. The syntheses and properties of the SiO₂–azo initiator and the composite were characterized by Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, thermogravimetric analysis, gel permeation chromatography, and differential scanning calorimetry techniques. The results confirm that the SiO₂–azo initiator and the composite were synthesized successfully. Styrene was polymerized with the initiation of SiO₂–azo, and the resulting PS domain accounted for 48.6% of the total amount of composite. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis,characterization, and photo‐responsive properties of Y‐shaped amphiphilic azo triblock copolymer

In this study, we report the synthesis, characterization, and photo‐responsive properties of a new Y‐shaped amphiphilic azo triblock copolymer composed of two isotropic polyethylene glycol (PEG) blocks and an azobenzene liquid crystalline block. The azo block, with two ending groups suitable for the azo coupling reaction, is polymerized by atom transfer radical polymerization with a synthesized initiator containing two functional terminal groups. The macromolecular diazonium salts are prepared by the diazotization of PEG terminated with an amino group. The triblock copolymer is obtained by the azo coupling reaction between the azo block and macromolecular diazonium salts in DMF under mild condition. The intermediates and the obtained triblock copolymer are characterized by ¹H NMR, FT‐IR, GPC, POM, DSC, TEM, and UV‐vis. The photoinduced isomerization behavior of the azo copolymer is investigated by UV‐vis. With the addition of water into the solution of the triblock copolymer, spherical aggregates with an average diameter of about 400 nm can be easily obtained. The aggregates are elongated when irradiated with polarized 365 nm UV light. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43695.     

TPA‐PPEs – New alternating donor copolymers for potential application in photovoltaic devices

A series of phenyleneethynylene copolymers with triphenylamine units as hole‐transporting moieties (TPA‐PPEs) were synthesized by the palladium‐catalyzed cross‐coupling polycondensation of diethynyltriphenylamines and selected dihalogen comonomers, for instance substituted benzene, thiophene, benzothiadiazole, or anthracene. Incorporation of the electron‐rich amino group into the PPE backbone does not interrupt the main chain conjugation. Furthermore, it has a decreasing effect on the oxidation potential, thus makes these polymers interesting as hole‐injection/hole‐transporting materials. The chemical structure of the new alternating copolymers was confirmed by ¹H and ¹³C NMR spectroscopy and elemental analysis and gel‐permeation chromatography (GPC; THF, M_n ≈ 15,000–30,000 g/mol) was conducted. Furthermore, their optical properties were investigated by UV/vis spectroscopy. The TPA‐PPEs exhibit absorption maxima at around 400 nm (π‐π*), except anthracene containing copolymer 3f (λ_max = 514 nm in THF) and benzothiadiazole containing one 3g (λ_max = 503 nm in THF). The TPA copolymers have oxidation potentials about 1.1 V (Ag/AgCl). They are good photoconducting materials ( 3a : I_Photo = 4 × 10^?10 A at 425 nm (400 V), 3g : I_Photo = 1.3 × 10^?11 A at λ_max = 500 nm (20 V)) and show emission after excitation at around 450 nm (560 nm 3f ). Their application in nonoptimized polymer solar cells (bulk heterojunction) led to power conversion efficiencies of around 1–1.8% after illumination with 100 mW/cm² of AM1.5. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and characterization of hyaluronan/chitosan scaffold cross‐ linked by 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide

A novel biocompatible scaffold was prepared by cross‐linking hyaluronan (HA) and chitosan (CS). The carboxyl groups of HA were activated by 1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide (EDC) and then cross‐linked with amino groups of CS by forming amide bonds. The HA/CS scaffold thus prepared was characterized using Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and differential scanning calorimetry. FTIR spectra showed that the absorbance of the amide (1550 cm^?1) and carbonyl (1633 cm^?1) bond in the cross‐linked scaffold was stronger than that in HA or CS. SEM micrographs showed that the cross‐linked scaffold produced at low EDC concentration had an intertwisted ribbon‐like microstructure, while the product prepared at higher EDC concentration had a porous structure. The concentration of EDC in the reaction system greatly affected the structure and properties of the HA/CS scaffold. The prepared scaffold could strongly resist degradation by hyaluronidase, free radicals in vitro and stress. Copyright © 2007 Society of Chemical Industry     

Influence of medium on the nanostructure and properties of poly(4‐aminodiphenylamine)‐silver nanocomposites

Poly(4‐aminodiphenylamine)‐silver nanocomposites were synthesized by an easy one‐step aqueous chemical oxidative polymerization of 4‐aminodiphenylamine (4ADPA) using silver nitrate (AgNO₃) as the oxidant. Two different structure directing surfactants, p‐toluene sulfonic acid (p‐TSA) and cetyl trimethyl ammonium bromide/hydrochloric acid (CTAB/HCl), were independently used for the nanocomposite (NC) preparation. The NCs prepared in p‐TSA and CTAB/HCl medium were designated as P4ADPA/AgNC_(p?TSA) and P4ADPA/AgNC_(CTAB/HCl), respectively. We investigated the morphological variations in the NCs based on the medium. P4ADPA/AgNC_(p?TSA) and P4ADPA/AgNC_(CTAB/HCl) were characterized by field emission scanning electron microscopy, X‐ray diffraction analysis, Fourier transform infrared spectroscopy, thermogravimetric analysis and UV‐visible spectroscopy. Copyright © 2011 Society of Chemical Industry     

Magnetic properties of polystyrene‐b‐poly(2‐hydroxylethyl methacrylate)/metal hybrids

Hybrids, which were composed of the amphiphilic diblock copolymer polystyrene‐b‐poly(2‐hydroxylethyl methacrylate) (PSt‐b‐PHEMA) and nickel, cobalt, or a nickel–cobalt alloy, were characterized with infrared absorption spectroscopy and ultraviolet–visible (UV–vis) absorption spectroscopy. UV–vis spectroscopy analysis showed that a redshift happened after the PSt‐b‐PHEMA/metal‐ion complexes were reduced by KBH₄. The PSt‐b‐PHEMA/nickel–cobalt alloy hybrids had the biggest redshift [difference of the UV‐vis absorption wavelength between (PSt‐b‐PHEMA)/metal ion complex and (PSt‐b‐PHEMA)/metal hybrids (Δλ_m = 19.9 nm)]. In comparison with the PSt‐b‐PHEMA/nickel hybrids (Δλ_m = 3.5 nm) and PSt‐b‐PHEMA/cobalt hybrids (Δλ_m = 9.0 nm). The magnetic properties of PSt‐b‐PHEMA/metal were studied with vibrating sample magnetometry. The results of magnetic hysteresis loop studies showed that the obtained PSt‐b‐PHEMA/metal hybrids could be categorized as ferromagnetic materials. The results showed that the magnetic susceptibility decreased with increasing temperature in the range of 150–400 K and increased with increasing temperature above 400 K. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Synthesis and properties of polymer from bis‐3,4‐ethylenedioxythiophene substituted acenaphthenequinoxaline

A new electrochoromic polymer poly(8,11‐bis(3,4‐ethylenedioxy thiophen‐2‐yl)acenaphtho[1,2‐b]‐quinoxaline) (PBEAQ) was synthesized by electrochemical polymerization of the corresponding monomer (BEAQ) in a 0.1 M tetraethylammonium tetrafluoroborate (TEABF₄) dichloromethane–acetonitrile (2 : 1, v : v) solution. The monomer and polymer were characterized by elemental analysis, ¹H‐NMR, IR, and UV‐vis spectroscopy. The electrochemical and optical properties of polymer were investigated by cyclic voltammetry and UV‐vis spectroscopy. Cyclic voltammetry and spectroelectrochemistry studies demonstrated that the polymer can be reversibly reduced and oxidized (both n‐ and p‐doped) between ?2 V and +1.5 V vs. Ag/Ag⁺. The polymer had a transmissive light blue color in the oxidized state and reddish color in the reduced state. Undoped polymer shows UV‐vis absorption peaks at 615 nm in solution, 650 nm in solid state, and has an optical band gap of 1.5 eV. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Metallo‐supramolecular materials based on terpyridine‐functionalized polyhedral silsesquioxane

In this study, novel metallo‐supramolecular materials based on terpyridine‐functionalized polyhedral silsesquioxane were synthesized from 4′‐chloro‐2,2′:6′,2″‐terpyridine and amino‐group‐functionalized polyhedral oligomeric silsesquioxane. The obtained terpyridine‐functionalized polyhedral silsesquioxanes were converted to metallo‐supramolecular hybrid materials by coordination polycondensation reaction with Co(II) or Cu(II) ions. The supramolecular polymers created were characterized by means of structure, morphology and stimuli‐responsive performance employing scanning electron microscopy, amperometric techniques and UV–visible and Fourier transform IR spectroscopy. UV?visible and cyclic voltammetry studies showed that both the optical and electrochemical properties of metallo‐supramolecular materials are affected by the substituent at the pyridine periphery. The supramolecular polymers obtained exhibited electrochromism during the oxidation processes of cyclic voltammogram studies. As a result, these terpyridine‐functionalized polyhedral silsesquioxanes are good candidates for electronic, opto‐electronic and photovoltaic applications as smart stimuli‐responsive materials. © 2013 Society of Chemical Industry     

Low‐temperature synthesis of nano‐to‐submicron size organo‐zinc oxide and its effect on properties of polybutadiene rubber

Nano‐to‐submicron sized particles of zinc oxide (ZnO) were synthesized by low temperature hydrolysis method. Organo‐ZnO was also synthesized by the aforementioned method in presence of polyethylene glycol (PEG‐2000). The synthesized ZnO particles were characterized by infra‐red spectroscopy, X‐ray diffraction, BET surface area, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). FTIR showed that PEG was present on the ZnO surface. Organo‐ZnO exhibited floral‐shape morphology consisting of concentric nanorods. The average diameter of the nanorods was ～ 250 nm as evident from SEM. TEM showed that the nanorods were made of ～ 50 nm sized small particles. UV‐absorbance property of ZnO was unaltered even after organic coating. Curing, physico‐mechanical and thermal properties of polybutadiene rubber compounded with organo‐ZnO were compared with those of standard commercial rubber grade ZnO and nano‐ZnO prepared by high and low temperature methods. The cure‐characteristics were studied with the help of moving die rheometer as well as differential scanning calorimetry (DSC). Crosslink‐density measurement along the DSC vulcanization exotherm showed better cure efficiency of organo‐ZnO. Organo‐ZnO containing compound exhibited better mechanical and thermal properties. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Studies on the critical phase‐transition behavior of cholesteric N‐phthaloyl chitosan/dimethyl sulfoxide solutions by five techniques

A selectively side‐modified chitosan derivative, N‐phthaloyl chitosan (PhthCs), was prepared. Five techniques, including circular dichroism (CD) spectropolarimetry, ultraviolet–visible (UV–vis) spectroscopy, small‐angle light scattering (SALS), polarized optical microscopy (POM), and differential scanning calorimetry (DSC), were simultaneously applied to investigate the order–disorder phase transition for the lyotropic PhthCs/dimethyl sulfoxide system. POM observations suggested that the critical concentration was 48 wt %, which agreed well with the DSC measurements. A four‐leaf SALS picture was recorded in biphasic solutions. The four‐leaf type became a circular symmetric scattering picture with a further increase in the concentration. A sharp peak at 330 nm was recorded in dilute isotropic solutions with CD measurements. The sharp peak turned into a broad tailed peak from 330 to 800 nm after the phase transition occurred. The sharp peak was induced by a chromophore (phthoyl group). The broad peak was attributed to the formation of short‐range‐ordered organization in the concentrated solutions. In UV–vis studies, when the system varied from isotropic to anisotropic, the absorption band turned into platform. These five techniques were proven to be feasible methods for measuring the phase transition of cholesteric liquid crystals. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 583–586, 2003     

Band‐Gap Engineering and Enhanced Photocatalytic Activity of Sm and Mn Doped BiFeO3 Nanoparticles

Bi_1‐xSm_xFe_1‐yMn_yO₃ (BSFMO, x = 0.0, 0.05; y = 0.0, 0.05, 0.10, 0.15, 0.20, 0.25) nanoparticles were synthesized by using double solvent sol–gel method. Photocatalytic activity was investigated under UV and visible‐light illumination. The structural, morphological, and optical properties were analyzed by X‐ray diffraction, scanning electron microscopy, and UV‐vis spectroscopy respectively. The crystallite size of BiFeO₃ (BFO) decreases from (57.3–17.2 nm) with the increase in Sm and Mn‐doping concentration. The surface morphology shows that the pure and Sm‐doped BFO nanoparticles are irregular in shape but changes to spherical shape after Mn‐doping up to 25%. The band‐gap engineering of BFO nanoparticles is achieved by co‐doping of Sm and Mn. The band‐gap of BFO could be tuned successfully from 2.08–1.45 eV, which may be due to the distortion induced in Fe‐O octahedron and the rearrangement of molecular orbitals. These results give rise to enhanced photocatalytic activity by degradation of organic dyes (MB, CR, and MV) under the visible‐light illumination.     

Degradation of 1‐amino‐4‐bromoanthraquinone‐2‐sulfonic acid using combined airlift bioreactor and TiO2‐photocatalytic ozonation

BACKGROUND: Traditional treatment systems failed to achieve efficient degradation of anthraquinone dye intermediates at high loading. Thus, an airlift internal loop reactor (AILR) in combination with the TiO₂‐photocatalytic ozonation (TiO₂/UV/O₃) process was investigated for the degradaton of 1‐amino‐ 4‐bromoanthraquinone‐2‐ sulfonic acid (ABAS). RESULTS: The AILR using Sphingomonas xenophaga as inoculum and granular activated carbon (GAC) as biocarrier, could run steadily for 4 months at 1000 mg L^?1 of the influent ABAS. The efficiencies of ABAS decolorization and chemical oxygen demand (COD) removal in AILR reached about 90% and 50% in 12 h, respectively. However, when the influent ABAS concentration was further increased, a yellow intermediate with maximum absorbance at 447 nm appeared in AILR, resulting in the decrease of the decolorization and COD removal efficiencies. Advanced treatment of AILR effluent indicated that TiO₂/UV/O₃ process more significantly improved the mineralization rate of ABAS bio‐decolorization products with over 90% TOC removal efficiency, compared with O₃, TiO₂/UV and UV/O₃ processes. Furthermore, the release efficiencies of Br^? and SO₄^2? could reach 84.5% and 80.2% during TiO₂/UV/O₃ treatment, respectively, when 91.5% TOC removal was achieved in 2 h. CONCLUSION: The combination of AILR and TiO₂/UV/O₃ was an economic and efficient system for the treatment of ABAS wastewater. © 2012 Society of Chemical Industry     

Rare‐earth‐doped SiO2‐CaF2 glass ceramic nano‐particle with upconversion properties

Rare‐earth‐doped upconversion nano‐phosphor shows new possibilities in the field of bioimaging because of its unique properties like higher penetration depth, low signal to noise ratio (SNR), good photo stability, and zero auto fluorescence. The oxyfluoride glass system is the combination of both fluoride and oxide where fluoride host offers high optical transparency due to low phonon energy and oxide network offers high physical stability. Thus, in the present work, an attempt has been made to synthesize 1 mol% Er³⁺ doped SiO₂‐CaF₂ glass ceramic nano‐particles through sol‐gel route. The synthesized glass ceramic particles were heat treated at 4 different temperatures starting from 600°C to 900°C.The X‐ray diffraction (XRD) analysis and Transmission electron microscopy (TEM) analysis confirmed the formation of CaF₂ nano‐crystals in the matrix which is 20‐30 nm in size. The vibrational spectroscopic analysis of the glass ceramics sample has been investigated by Fourier transform infrared (FTIR) spectroscopy. The UV‐Visible‐NIR spectroscopy analysis was carried out to analyze the absorption intensity in the near infrared region. Upon 980 nm excitation, the sample shows red emission corresponds to ⁴F_9/2→⁴I_15/2 energy level transition. The prepared nano‐particles showed excellent biocompatibility when tasted on MG‐63 osteoblast cells.     

New cardo silylated poly(azomethine)s containing 9,9′‐diphenylfluorene units as materials with Brønsted acid‐dependent fluorescence

Aromatic poly(azomethine)s have been studied due to their attractive properties such as high thermal stability, semiconducting behavior and the ability to coordinate species with their imine units (C?N). In this paper, the synthesis and characterization of two novel silylated poly(azomethine)s containing cardo units are reported. These materials were highly soluble in organic solvents such as chloroform and m‐cresol and were thermally stable, and PAzMC1 exhibited a high glass transition temperature value (287 °C), while that for PAzMC2 was not observed. UV–visible spectrophotometry revealed absorption bands related to the aromatic backbone of both PAzMCs, 300–285 nm in tetrahydrofuran and 310–301 nm in dimethylsulfoxide, and bands attributed to the conjugated imine unit at around 350 nm. In order to investigate the phenomenon of the emission of fluorescence promoted by dopant agents with regard to potential optoelectronic applications, the materials were doped with H₂SO₄ and their optical and electrochemical properties investigated. Thus, the absorption band of the imine group was suppressed due to the nitrogen atoms being protonated. Fluorescence spectroscopy analysis developed in dilute solutions of polymers showed no emission from the undoped polymers, whereas the acid‐doped species emitted fluorescence in the UV and violet regions (322 nm). Cyclic voltammetry measurements were carried out and HOMO–LUMO energies were estimated. This study provides a starting point for the development of new poly(azomethine)s with doping‐dependent emission. © 2019 Society of Chemical Industry     

Synthesis,characterization and fluorescence performance of a waterborne polyurethane‐based fluorescent dye 4‐amino‐N‐cyclohexyl‐1,8‐naphthalimide,WPU‐ACN

A waterborne‐polyurethane‐based fluorescent dye 4‐amino‐N‐cyclohexyl‐1,8‐naphthalimide (WPU‐ACN) was synthesized by attaching 4‐amino‐N‐cyclohexyl‐1,8‐naphthalimide (ACN) into polyurethane chains according to a prepolymer?ionomer process. The structure of WPU‐ACN was confirmed by means of Fourier transform infrared spectroscopy and UV?visible absorption. The number‐average molecular weight, glass transition temperature and average emulsion particle size for WPU‐ACN were determined as 7.8 × 10⁵ g mol^?1, 60 °C and 60 nm, respectively. The improved thermal stability of WPU‐ACN could be attributed to the incorporation of naphthalimide units in the preformed urethane groups. The fluorescence intensity of WPU‐ACN was dramatically enhanced compared with that of ACN. It was found that the fluorescence intensity of WPU‐ACN increased with increasing temperature, and the fluorescence spectra of WPU‐ACN showed a positive solvatochromic effect. In addition, the fluorescence of WPU‐ACN emulsion was very stable not only for long‐term storage but also for fluorescence quenching. © 2013 Society of Chemical Industry