An easy‐to‐obtain silicone‐containing flame retardant and its effects on the combustion of polycarbonate

A novel silicone‐containing flame retardant (HSOBA) synthesized from hydrogen‐containing silicone oil and Bisphenol A via a simple approach has been incorporated into polycarbonate (PC) matrix to study its effects on the flame retardancy. The flame retardancy of PC/HSOBA composites is investigated by limiting oxygen index (LOI), vertical burning tests (UL‐94), and cone calorimeter measurement. The LOI value of the composites is 31.7 and the UL‐94 rating reaches V‐0, when the content of HSOBA is 3 wt %. Cone calorimeter data confirm that the HSOBA acts as an effective additive functioning both as flame retardants and as smoke suppressant. Evolution of the thermal behaviors of the composites tested by TGA, the morphological structures, and the constituent of char residue after LOI tests characterized by scanning electronic microscopy‐energy‐dispersive X‐ray analysis were used to explain the possible flame‐retardant mode. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Combustion characteristics and synergistic effects of red phosphorus masterbatch with expandable graphite in the flame retardant HDPE/EVA composites

In this work, the flammability behaviors and synergistic effects of red phosphorus masterbatch (RPM) with expandable graphite (EG) in flame‐retardant high‐density polyethylene/ethylene vinyl‐acetate copolymer (HDPE/EVA) composites have been investigated by limiting oxygen index (LOI), UL‐94 test, cone calorimeter test (CCT), thermogravimetric analysis (TGA), Fourier‐transform infrared (FTIR) and scanning electron microscopy (SEM). The data obtained from LOI, UL‐94 test and CCT showed that suitable amount of RPM had synergistic effects with EG in the HDPE/EVA/EG/RPM composites. The addition of RPM greatly increased the LOI values by 3.4%, obtained UL‐94 V‐0 rating, decreased the heat release rates and total heat release, and prolongated the ignition time when 6.7 phr RPM substituted for EG in the HDPE/EVA/EG/RPM composites. The data from TGA and FTIR spectra also indicated the synergistic effects of RPM with EG considerably enhanced the thermal degradation temperatures. The morphological observations after UL‐94, CCT, and SEM images presented positive evidences that the synergistic effects took place for RPM with EG, and the flame‐retardant mechanism has been changed in flame‐retardant HDPE/EVA/EG/RPM composites. The formation of stable and compact charred residues promoted by RPM acted as effective heat barriers and thermal insulations, which improved the flame‐retardant performances and prevented the underlying polymer materials from burning. POLYM. ENG. SCI., 55:2884–2892, 2015. © 2015 Society of Plastics Engineers     

Thermal degradation and combustion behaviors of flame retarded glass fiber reinforced polyamide 6 composites based on cerium hypophosphite

In this work, cerium hypophosphite (CeHP) was synthesized and characterized by scanning electron microscope (SEM) and thermogravimetric analysis (TGA) test. CeHP presented rod‐like morphological feature with good thermal stability. Subsequently, CeHP was added into glass fiber reinforced polyamide 6 (GFPA) to develop flame retardant glass fiber reinforced polyamide 6 composites (FR‐GFPA). The flame retardancy of FR‐GFPA composites was characterized by limiting oxygen index (LOI), Underwriters Laboratories 94 testing (UL‐94), microscale combustion calorimeter, and cone calorimeter test. FR‐GFPA composite with 20 wt% CeHP loading passed UL‐94 V0 rating with a high LOI of 26.5 vol%. Cone Calorimeter test showed that peak of heat release rate (PHRR) and total heat release (THR) of FR‐GFPA composites were reduced 27.1% and 21.1% compared with those of GFPA. The mechanical measurement revealed that the tensile strength first increased and then decreased with the increase of CeHP loading. With 15 wt% CeHP loading, the tensile strength of FR‐GFPA composite was 43.0% higher than GFPA. TGA and char residue characterization revealed that the addition of CeHP could significantly promote the formation of condensed char residue. The FR‐GFPA composites obtained herein exhibited superior combined properties of fire resistance, thermal stability, and mechanical properties, demonstrating that CeHP will be a promising candidate for preparing high performance polyamide composites. POLYM. COMPOS., 37:3073–3082, 2016. © 2015 Society of Plastics Engineers     

Flammability and thermal degradation of intumescent flame‐retardant polypropylene composites

The flammability of polypropylene (PP) composites containing intumescent flame‐retardant additives, i.e., melamine pyrophosphate (MPP) and 1‐oxo‐4‐hydroxymethyl‐2,6,7‐trioxa‐1‐phosphabicyclo[2.2.2]octane (PEPA) was characterized by limiting oxygen index (LOI), UL 94 test, and cone calorimeter. In addition, the thermal degradation of the composites was studied using thermogravimetric analysis (TG) and real‐time Fourier transform infrared (RTFTIR). It has been found that the PP composite only containing MPP (or PEPA) does not show good flame retardancy even at 30% additive level. Compared with the PP/MPP binary composite, the LOI values of the PP/MPP/PEPA ternary composites at the same additive loading are all increased, and UL 94 rating of the ternary composite (PP3) studied is raised to V‐0 rating from no rating (PP/MPP). The cone calorimeter results show that the heat release rate of some ternary composites decreases in comparison with the binary composite. It is noted from the TG data that initial decomposition temperatures of ternary composites are lower than that of the binary composites. The RTFTIR study indicates that the PP/MPP/PEPA composites have higher thermal oxidative stability than the pure PP. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

The flame retardant effect of aluminum phosphinate in combination with zinc borate,borophosphate, and nanoclay in polyamide‐6

The effect of zinc borate (ZnB), borophosphate (BPO₄), and organoclay were studied to improve the flame retardancy of polyamide‐6 composites containing organic phosphinates. The flame retardancy of polyamide‐6 composites was investigated using limiting oxygen index (LOI), Underwriters Laboratories (UL‐94) standard, thermogravimetric analysis, Fourier transform infrared spectroscopy, and mass loss calorimeter. The addition of 15 wt% aluminum phosphinate (AlPi) increased the LOI value from 22.5 to 29.5, and V0 rating was obtained from UL‐94 test. The addition of organoclay, ZnB, and borophosphate does not change the predominant gas phase mechanism of AlPi during LOI and UL‐94 tests. The addition of organoclay increased the condensed phase mechanism of AlPi physically by the protective effect of layered silicate, whereas the addition of ZnB increased the condensed phase mechanism of AlPi chemically by the formation of boron aluminum phosphate species deducted from mass loss calorimeter studies. Copyright © 2012 John Wiley & Sons, Ltd.     

Novel intumescent flame retardants: synthesis and application in polycarbonate

Novel phosphorus‐containing and nitrogen‐containing intumescent flame retardants, bis‐aminobenzyl spirocylic pentaerythritol bisphosphonate (BASPB) and arylene‐N,N′‐bis(2,2‐dimethyl‐1,3‐propanediol phosphoramidate) (ABDPP), were synthesized, and their structures were characterized with Fourier transform infrared spectroscopy and ¹H and ³¹P nuclear magnetic resonance. The phosphorus compounds were used to impart flame retardancy to polycarbonate (PC). Combustion behaviors and thermal degradation properties of the flame‐retarded‐PC composites were assayed by limiting oxygen index (LOI), vertical burning test (UL‐94), cone calorimeter test, and thermogravimetric analysis. PC/5 wt.% BASPB and PC/5 wt.% ABDPP composites passed UL‐94 V‐0 rating; their LOI values were 35.5% and 34.7%, respectively. Scanning electron microscopy revealed that the char properties had crucial effects on the flame retardancy. The mechanical properties and water resistance of the PC/BASPB and PC/ABDPP composites were also measured. After water resistance test, PC/5 wt.% BASPB and PC/5 wt.% ABDPP composites kept V‐0 rating, and the mass loss was only 1.0%. Copyright © 2012 John Wiley & Sons, Ltd.     

Fire performance and thermal stability of polypropylene nanocomposites containing organic phosphinate and ammonium polyphosphate additives

In order to develop polymer‐clay nanocomposites with reduced flammability by incorporation of char‐forming conventional nitrogen and phosphorus based flame retardants at low loading levels, the polypropylene‐clay nanocomposites were prepared by melt blending method with Cloisite 15A (15A), organic phosphinate (OP) and ammonium polyphosphate (AP) additives. Thermal analysis shows that addition of 5% 15A along with 15% (w/w) OP in polypropylene (PP)/PPgMA increases the thermal stability of PP/PPgMA/OP/15A composite by 82 °C showing synergistic effect, and the PP/PPgMA/AP/15A sample with same loading becomes thermally stable by 70 °C. Cone calorimeter analysis of the PP/PPgMA/OP/15A and PP/PPgMA/AP/15A composites measures the reduction in peak heat release rate values by 66% and 58%, respectively. Addition of 20% OP to PP/PPgMA enhances the limiting oxygen index (LOI) value and gives V‐2 rating of UL‐94 test. Further, on replacing 5% OP with 5% 15A for PP/PPgMA/OP/15A sample without changing the total 20% loading, the LOI value increases further slightly but give no UL‐94 rating. Also, PP/PPgMA/AP/15A sample with same loading similar to that of PP/PPgMA/OP/15A sample shows an enhancement in LOI value and gives no rating in UL‐94 test. No relation was observed between LOI values and UL‐94 test rating in the present study. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of a novel flame retardant containing phosphorus and sulfur and its application in polycarbonate

A novel flame retardant containing phosphorus and sulfur, bis(2‐tienyl)phenylphosphine (BTPP) was synthesized and characterized with Fourier transform infrared spectroscopy, ¹H, ¹³C, and ³¹P nuclear magnetic resonance. BTPP was used to impart flame retardancy to polycarbonate (PC). Combustion behaviors and thermal degradation properties of PC/BTPP system were assayed by limiting oxygen index (LOI), vertical burning test (UL‐94), cone calorimeter test, and thermogravimetric analysis. PC/3 wt% BTPP passed UL‐94 V‐0 rating with 3.0 mm samples and the LOI value was 36.5%. PC/6 wt% BTPP passed UL‐94 V‐0 rating with 1.6 mm samples and the LOI value was 38.5%. Scanning electron microscopy revealed that char properties had direct effects on the flame retardancy. Mechanical properties and water resistance of PC/BTPP system were also examined. After water resistance test, PC/3 wt% BTPP with 3.0 mm samples and PC/6 wt% BTPP with 1.6 mm samples kept V‐0 rating and mass loss were only 0.2%. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

The effect of red phosphorus on the fire properties of intumescent pine wood flour – LDPE composites

Red phosphorus (RP) was used to improve the fire performance of wood flour – low density polyethylene (LDPE) composites containing ammonium polyphosphate (APP). The fire performance of LDPE‐based composites was investigated by using limiting oxygen index (LOI), UL‐94 standard, thermogravimetric analysis, and cone calorimeter. The addition of 30 wt% APP increased the LOI value from 17.5 to 24.2 and still burned to clamp (BC) in UL‐94 test. The RP showed beneficial effect when combinedly used with APP. The maximum beneficial effect was seen at ratio of 5:1 (APP : RP) with the highest LOI value of 27.2 and UL‐94 rating of V0. RP showed its beneficial effect via increasing the gas phase action of the flame retardant system. Copyright © 2015 John Wiley & Sons, Ltd.     

Flame retardation and thermal degradation of flame‐retarded polypropylene composites containing melamine phosphate and pentaerythritol phosphate

The flame retardation of polypropylene (PP) composites containing melamine phosphate (MP) and pentaerythritol phosphate (PEPA) was characterized by limiting oxygen index (LOI) and UL 94. The morphology of the char obtained from the combustion of the composites was studied by scanning electron microscopy (SEM). The thermal degradation of the composites was investigated using thermogravimetric (TG) analysis and real‐time Fourier transform infrared (RTFTIR) spectroscopy. It has been found that the PP composites containing only MP do not show good flame retardancy even at 40% additive level. Compared with the PP/MP binary composites, all the LOI values of the PP/MP/PEPA ternary composites at the same additive loading increase, and UL 94 ratings of the ternary composites at suitable MP/PEPA ratios are raised to V‐0 from no rating (PP/MP). The TG and RTFTIR studies indicate that the interaction occurs among MP, PEPA and PP. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis of a phenylene phenyl phosphine oligomer and its flame retardancy for polycarbonate

A novel flame retardant, phenylene phenyl phosphine oligomer (PPPO) was synthesized and its chemical structure was characterized using Fourier transform infrared spectroscopy, ¹H, ¹³C, ³¹P nuclear magnetic resonance spectroscopy and mass spectrometer. PPPO was used to impart flame retardancy to polycarbonate (PC). Combustion behaviors and thermal degradation properties of PC/PPPO system were assayed by limiting oxygen index (LOI), vertical burning test (UL‐94), cone calorimeter test, and thermogravimetric analysis. PC/6 wt % PPPO passed UL‐94 V‐0 rating with 3.0 mm samples and the LOI value was 34.1%, and PC/8 wt % PPPO also passed UL‐94 V‐0 rating with 1.6 mm samples and the LOI value was 36.3%. Scanning electron microscopy reveals that the char properties had crucial effects on the flame retardancy of PC. Mechanical properties and water resistance of PC/PPPO system were also measured. After water resistance test, PC/6 wt % PPPO with 3.0 mm samples and PC/8 wt % PPPO with 1.6 mm samples kept V‐0 rating and mass loss was only 0.2%. The results revealed that PPPO was an efficient flame retardant for PC. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synergistic effect of metal oxides on the flame retardancy and thermal degradation of novel intumescent flame‐retardant thermoplastic polyurethanes

The synergistic effects of some metal oxides on novel intumescent flame retardant (IFR)–thermoplastic polyurethane (TPU) composites were evaluated by limiting oxygen index (LOI), vertical burning test (UL‐94), thermogravimetric analysis (TGA), cone calorimetry, and scanning electron microscopy. The experimental data indicated that the metal oxides enhanced the LOI value and restricted the dropping of the composites. The IFR–TPU composites passed the UL‐94 V‐0 rating test (1.6 mm) in the presence of magnesium oxide (MgO) and ferric oxide (Fe₂O₃) at 35 wt % IFR loading, whereas only the MgO‐containing IFR–TPU composite reached a UL‐94 V‐0 rating at 30 wt % IFR loading. The TGA results show that the metal oxides had different effects on the process of thermal degradation of the IFR–TPU compositions. MgO easily reacted with polyphosphoric acid generated by the decomposition of ammonium polyphosphate (APP) to produce magnesium phosphate. MgO and Fe₂O₃ showed low flammability and smoke emission due to peak heat release rate, peak smoke production rate, total heat release, and total smoke production (TSP). However, zinc oxide brought an increase in the smoke production rate and TSP values. Among the metal oxides, MgO provided an impressive promotion on the LOI value. The alkaline metal oxide MgO more easily reacted with APP in IFRs. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Study on the flame retardancy of EVM/magnesium hydroxide composites optimized with a flame retardant containing phosphorus and silicon

A novel phosphorus‐silicon‐containing flame retardant, spirocyclic pentaerythritol bisphosphorate disphosphoryl chloride/9, 10‐dihydro‐9‐oxa‐10‐phosphaphanthrene‐10‐oxide/vinyl methyl dimethoxysilane (SPDV), was synthesized successfully and used for optimizing the flame retardancy of ethylene‐vinyl acetate copolymer (EVM) rubber/magnesium hydroxide (MDH) composites. The microstructure of SPDV was characterized and determined by Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopy. Thermogravimetric analysis (TGA) showed that SPDV had good charring effect in air even at high temperature (800°C). The flame retardancy of the optimized EVM/MDH composites by SPDV was investigated by limiting oxygen index (LOI), cone calorimeter, and UL‐94 vertical burning tests. A higher LOI value (29.4%) and better UL‐94 rating (V‐0) can be achieved for the optimized EVM/MDH composite (EVM‐7) than EVM/MDH composite without SPDV (EVM‐3) with the total loading of additives. The HRR decreased and residual mass increased gradually as the loading of SPDV increased for the optimized EVM/MDH composites. There existed distinct synergistic intumescent flame‐retardant effect between SPDV and MDH in EVM matrix. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

A phosphorus‐containing phenolic derivative and its application in benzoxazine resins: Curing behavior,thermal, and flammability properties

In this work, flame‐retardant benzoxazine resins were prepared by copolymerization of bisphenol A based benzoxazine (BA‐a) and a phosphorous‐containing phenolic derivative (DOPO‐HPM). The curing behavior, thermal stability, and flame resistance of BA‐a/DOPO‐HPM composites were studied by differential scanning calorimeter (DSC), thermogravimetric analysis (TGA), limited oxygen index (LOI) measurement, UL94 test, and cone calorimeter. The DSC results indicated that DOPO‐HPM catalyzed the curing reaction because of its acidity. The TGA results revealed that the BA‐a/DOPO‐HPM thermosets possessed higher decomposition temperatures (T_5%) and char yields than that of BA‐a. The combustion tests indicated that the flame retardant properties of BA‐a/DOPO‐HPM thermosets were enhanced. The BA‐a/DOPO‐HPM‐20 sample acquired the highest LOI value of 32.6% and UL94 V‐0 rating. Moreover, the average of heat release rate (av‐HRR), peak of heat release rate (pk‐HRR), average of effective heat of combustion (av‐EHC) and total heat release (THR) of BA‐a/DOPO‐HPM‐20 were decreased by 24.6%, 53.1%, 14.9%, and 22.1%, respectively, compared with BA‐a. The attractive performance of BA‐a/DOPO‐HPM blends was attributed to the molecular structure of DOPO‐HPM composed of DOPO group with excellent flame‐retardant effect and phenolic hydroxyl group with catalysis. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43403.     

阻燃聚丁二酸丁二醇酯复合材料的制备及其阻燃性能研究

采用熔融共混技术,将次磷酸铝(AHP)和三聚氰胺氰尿酸盐(MC)引入聚丁二酸丁二醇酯(PBS),制备了一系列阻燃PBS复合材料,并采用极限氧指数、垂直燃烧、微型量热测试以及热失重分析研究了复合材料的阻燃性能以及热稳定性。结果表明,AHP可以有效提高PBS复合材料的阻燃性能;AHP与MC复配可以进一步提高复合材料的阻燃性能,两者质量比为2∶1,添加量为20 %（质量分数,下同）即可使复合材料达到UL 94 V 0级别,极限氧指数达到29 %;AHP以及复合阻燃体系可以有效提高复合材料初始分解温度及其高温稳定性。     

Synergistic effects of 4A zeolite on the flame‐retardant properties and thermal stability of an efficient halogen‐free flame‐retardant EVA composite

The synergistic effects of 4A zeolite (4A) on the thermal degradation, flame retardancy, and char formation of an efficient halogen‐free flame‐retardant ethylene‐vinyl acetate copolymer composite (EVA/IFR) were investigated by limited oxygen index (LOI), vertical burning test (UL‐94), cone calorimeter test (CCT), digital photography, scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), laser Raman spectroscopy (LRS) and thermogravimetric analytical (TGA) methods. It was found that a small amount of 4A clearly improved the LOI value of the EVA/IFR composite and reinforced the fire retardant performance with a great reduction in the combustion parameters of the EVA/IFR system from the CCT test. The entire composites passed the UL‐94 V‐0 rating test. The TGA and integral procedure decomposition temperature (IDPT) results showed that 4A enhanced the thermal stability of the EVA/IFR system and increased the char residue content effectively. The morphological structures observed by digital and SEM imaging revealed that 4A could promote EVA/IFR to form a more continuous and compact intumescent char layer. The LRS and EDS results demonstrated that by introduction of 4A into the EVA/IFR system, a more graphite structure was formed with increase phosphorus content in the char residue. POLYM. ENG. SCI., 56:380–387, 2016. © 2016 Society of Plastics Engineers     

Synthesis of a magnesium/aluminum/iron layered double hydroxide and its flammability characteristics in halogen‐free,flame‐retardant ethylene/vinyl acetate copolymer composites

Mg–Al–Fe ternary hydrotalcites were synthesized by a coprecipitation method and characterized with powder X‐ray diffraction, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The flame‐retardant effects of Mg/Al–CO₃ layered double hydroxides (LDHs) and Mg/Al/Fe–CO₃ LDHs in an ethylene/vinyl acetate copolymer (EVA) were studied with the limited oxygen index (LOI), the UL‐94 test, and the cone calorimeter test (CCT), and the thermal degradation behavior of the composites was examined by thermogravimetric analysis. The results showed that the LOI values of the EVA/(Mg/Al/Fe–CO₃ LDH) composites were basically higher than those of the EVA/(Mg/Al–CO₃ LDH) composites at the same additive level. In the UL‐94 test, there was no rating for the EVA/(Mg/Al–CO₃ LDH) composite at the 50% additive level, and a dripping phenomenon occurred. However, the EVA/(Mg/Al/Fe–CO₃ LDH) composites at the same loading level of LDHs containing a suitable amount of Fe³⁺ ion reached the V‐0 rating, the dripping phenomenon disappearing. The CCTs indicated that the heat release rate (HRR) of the EVA composites with Mg/Al/Fe–CO₃ LDHs containing a suitable amount of Fe³⁺ decreased greatly in comparison with that of the composites with Mg/Al–CO₃ LDHs. The introduction of a given amount of Fe³⁺ ion into Mg/Al–CO₃ LDHs resulted in an increase in the LOI, a decrease in the HRR, and the achievement of the UL‐94 V‐0 rating. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of a novel phosphorus‐containing compound on the flame retardancy and thermal degradation of intumescent flame retardant polypropylene

A novel flame retardant, tetra(5,5‐dimethyl‐1,3‐ dioxaphosphorinanyl‐2‐oxy) neopentane (DOPNP), was synthesized successfully, and its structure was characterized by FT‐IR, ¹H NMR, and ³¹P NMR. The thermogravimetric analysis (TGA) results demonstrate that DOPNP showed a good char‐forming ability. Its initial decomposition temperature was 236.4°C based on 1% mass loss, and its char residue was 41.2 wt % at 600°C, and 22.9 wt % at 800°C, respectively. The flame retardancy and thermal degradation behavior of novel intumescent flame‐retardant polypropylene (IFR‐PP) composites containing DOPNP were investigated using limiting oxygen index (LOI), UL‐94 test, TGA, cone calorimeter (CONE) test, and scanning electron microscopy (SEM). The results demonstrate that DOPNP effectively raised LOI value of IFR‐PP. When the loading of IFR was 30 wt %, LOI of IFR‐PP reached 31.3%, and it passed UL‐94 V‐0. TGA results show that DOPNP made the thermal decomposition of IFR‐PP take place in advance; reduced the thermal decomposition rate and raised the residual char amount. CONE results show that DOPNP could effectively decrease the heat release rate peak of IFR‐PP. A continuous and compact char layer observed from the SEM further proved the flame retardance. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Preparation and flame retardancy of a novel flame‐retardant poly(ethylene‐co‐vinyl acetate)/aluminum hydroxide composites containing phosphorus

A novel flame‐retardant (SPDH) containing phosphorus was synthesized through the reaction of 10‐(2,5‐dihydroxyphenyl)‐9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide and synthesized intermediate product 3,9‐dichloro‐2,4,8,10‐tetraoxa‐3,9‐diphosphaspiro[5.5] undecane‐3,9‐dioxide, which was used for optimizing the flame retardancy of ethylene‐vinyl acetate copolymer (EVM) rubber/aluminum hydroxide (ATH) composites. The microstructure of SPDH was characterized and determined by Fourier transform infrared and nuclear magnetic resonance spectroscopy. Thermogravimetric analysis (TGA) showed that SPDH had good charring effect at high temperature (600°C). The flame retardancy of the optimized EVM/ATH composites by SPDH was investigated by limiting oxygen index (LOI), cone calorimeter, and UL‐94 vertical burning tests. A higher LOI value (29.8%) and better UL‐94 rating (V‐0) can be achieved for the optimized EVM/ATH composite (EVM‐7) than EVM/ATH composite without SPDH (EVM‐3) with the total loading of additives. The heat release rate decreased and residual mass increased gradually as the loading of SPDH increased for the optimized EVM/ATH composites. There existed distinct synergistic flame‐retardant effect between SPDH and ATH in EVM matrix. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Microencapsulation of ammonium polyphosphate: Preparation,characterization, and its flame retardance in polypropylene

Microencapsulated ammonium polyphosphate (MCAPP) with a melamine–formaldehyde (MF) resin coating layer was prepared by in situ polymerization. MCAPP was characterized by Fourier transform infrared, X‐ray photoelectron spectroscopy, and so on. The results show that the microencapsulation with MF resin leads to a decrease in the particles' size and water absorption. The flame retardant action and mechanism of MCAPP and ammonium polyphosphate (APP) in polypropylene are studied using limiting oxygen index (LOI) and UL 94 test, and their thermal stability is evaluated by thermogravimetric analysis. The LOI value of the PP/MCAPP composite at 30 wt% loading is 30.5%, whereas the corresponding value of the PP/APP composite is only 20%. Moreover, the LOI values of the PP/MCAPP/PER composites are higher than the ones of the PP/APP/PER composites. In the UL 94 test, the PP/MCAPP/PER composites with suitable ratios of MCAPP to PER can reach the V‐0 rating, and the best rating of the PP/APP/PER composites is V‐1. V‐1. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers