Preparation of core–shell particles by dispersion polymerization with a poly(ethylene oxide) macroazoinitiator

A macroazoinitiator (MAI) containing a poly(ethylene oxide) (PEO) block was used with a methyl methacrylate monomer to prepare polymer particles in ethanol/H₂O solutions. The effects of the monomer/MAI ratio (RMI) and H₂O content in the solutions on the molecular weight, particle diameters, and chemical structure of the resulting polymer particles were investigated. The reaction mixtures showed three kinds of states, which were milky colloid solutions, macrogels and/or precipitations, and clear solutions. The colloid solutions were obtained in the solutions with an H₂O content of about 50–90 vol % and a RMI of 20–400. In the colloid solutions, core–shell nanospheres consisting of PEO shells and poly(methyl methacrylate) (PMMA) cores were predominantly obtained. In the specific conditions close to the area of gel and/or precipitation formation, particles connected about 0.5–5 μm in length were obtained. Multiblock copolymers nanospheres tended to be obtained with lower RMIs, and PMMA‐PEO‐PMMA tri‐bloc and/or PMMA‐PEO di‐block copolymer nanospheres were obtained with higher RMIs. The solubility of the monomer and the generated polymer in solutions may have affected the polymerization development and the state of the products. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Emulsifier‐free reversible addition–fragmentation chain transfer emulsion polymerization of alkyl acrylates mediated by symmetrical trithiocarbonates based on poly(acrylic acid)

Emulsifier‐free batch emulsion polymerization of n‐butyl acrylate and its semi‐batch copolymerization with 2,2,3,3,4,4,5,5‐octafluoropentyl acrylate and 2,2,3,4,4,4‐hexafluorobutyl acrylate both mediated by poly(acrylic acid) containing the trithiocarbonate group in the chain was employed to produce amphiphilic triblock copolymers. The polymerization‐induced self‐assembly of these copolymers in aqueous media gave rise to spherical core–shell particles. Irrespective of the experimental conditions, the polymeric product was characterized by a bimodal molecular weight distribution. The apparent violation of the reversible addition–fragmentation chain transfer polymerization mechanism may be attributed to restricted accessibility of the trithiocarbonate group in the self‐assembled block copolymers for propagating radicals that enter into the particle. Mean‐field theoretical arguments were employed to explain the exclusively spherical morphology of the particles observed in the experiment. © 2019 Society of Chemical Industry     

α‐Amylase immobilized by Fe3O4/poly(styrene‐co‐maleic anhydride) magnetic composite microspheres: Preparation and characterization

Fe₃O₄/poly(styrene‐co‐maleic anhydride) core–shell composite microspheres, suitable for binding enzymes, were prepared using magnetite particles as seeds by copolymerization of styrene and maleic anhydride. The magnetite particles were encapsulated by polyethylene glycol, which improved the affinity between the magnetite particles and the monomers, thus showing that the size of the microspheres, the amount of the surface anhydrides, and the magnetite content in the composite are highly dependent on magnetite particles, comonomer ratio, and dispersion medium used in the polymerization. The composite microspheres, having 0.08–0.8 μm diameter and containing 100–800 μg magnetite/g microspheres and 0–18 mmol surface‐anhydride groups/g microsphere, were obtained. Free α‐amylase was immobilized on the microspheres containing reactive surface‐anhydride groups by covalent binding. The effects of immobilization on the properties of the immobilized α‐amylase [magnetic immobilized enzyme (MIE)] were studied. The activity of MIE and protein binding capacity reached 113,800 U and 544.3 mg/g dry microspheres, respectively. The activity recovery was 47.2%. The MIE had higher optimum temperature and pH compared with those of free α‐amylase and showed excellent thermal, storage, pH, and operational stability. Furthermore, it can be easily separated in a magnetic field and reused repeatedly. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 328–335, 2005     

Kinetics of reversible addition–fragmentation transfer (RAFT) miniemulsion polymerization of styrene using dibenzyl trithiocarbonate as RAFT reagent and costabilizer

The roles of dibenzyl trithiocarbonate (DBTTC) as both costabilizer and reversible addition–fragmentation transfer (RAFT) reagent in RAFT miniemulsion polymerizations of styrene were investigated. The effectiveness of DBTTC costabilizer in retarding Ostwald ripening involved in the storage stability of miniemulsion is comparable to that of conventional low‐molecular‐weight costabilizers such as cetyl alcohol, but inferior to that of hexadecane. The major variables chosen for studying kinetics of RAFT miniemulsion polymerizations include the type of initiators and levels of DBTTC and surfactant. At a constant level of DBTTC, the rate of polymerization for benzoyl peroxide (BPO)‐initiated polymerization is slower than that for sodium persulfate (SPS)‐initiated polymerization. Furthermore, the polymerization rate decreases with increasing level of DBTTC for polymerizations initiated by BPO (or SPS). It is the monomer droplet nucleation that governs BPO‐initiated polymerizations. In contrast, for SPS‐initiated polymerizations, the probability for homogeneous nucleation to take place is greatly increased, especially for polymerizations with lower levels of DBTTC and higher levels of surfactant. © 2015 Society of Chemical Industry     

Interfacially initiated microemulsion copolymerization: One‐stage preparation of poly(n‐butyl methacrylate)–poly(N‐vinyl pyrrolidone) core–shell nanoparticles

Interfacially initiated microemulsion copolymerizations of n‐butyl methacrylate (BMA) and N‐vinyl pyrrolidone (NVP) by the redox initiation couple of benzoyl peroxide and ferrous sulfate were carried out with Tween 80 and n‐butanol as the surfactant and cosurfactant, respectively. Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy were recorded to analyze the chemical composition of the latex particles. Transmission electron microscopy was used to observe the particle morphology and dynamic light scattering to determine the particle size. The results demonstrated that interfacially initiated microemulsion polymerization prompted the copolymerization of the water‐soluble NVP monomer with the oil‐soluble BMA monomer to form core–shell nanoparticles. The influence of the surfactant concentration, BMA amount, and temperature on the particle size and polymerization rate was investigated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3751–3757, 2006     

Effect of the chain‐transfer‐agent content on the emulsion polymerization process and adhesive properties of poly(n‐butyl acrylate‐co‐acrylic acid) latexes

The effect of water on regenerated silkworm silk fibers has been studied and compared with that of water on natural silkworm silk fibers. Regenerated fibers are spun from an N‐methylmorpholine‐N‐oxide (NMMO) fibroin solution through a wet‐spinning process, leading to fibers with two distinct tensile behaviors, labeled as brittle and ductile, respectively. Regenerated fibers show a significant contraction when immersed in water. Contraction increases further after drying. In contrast, natural silkworm silk fibers show a negligible contraction when submerged in water. Regenerated fibers tested in water are considerably more compliant than samples tested in air, though their stiffness and tensile strength are significantly reduced. It has been shown that the tensile properties of brittle regenerated fibers can be modified by a wet‐stretching process, which consists of deforming the fiber while immersed in water. Regenerated wet‐stretched fibers always show a ductile behavior independent from their initial tensile behavior. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Direct polymer reaction of poly(styrene‐co‐maleic anhydride): Polymeric imidization

Using direct polymer reaction of poly(styrene‐co‐maleic anhydride) (SMA), a synthesis of copolymer of styrene and N‐aryl succinimide (SMI) has been investigated. SMI copolymers were synthesized from SMA copolymers by a concerted two‐step reaction, which consisted of the condensation reaction (step 1) of SMA with aromatic amine to prepare a precursor, succinamic acid, for imide formation and the cyclodehydration reaction (step 2) of succinamic acid. In this article, the application of Searle's preparation method of N‐aryl or N‐alkyl maleimide to the direct polymer reaction for SMI was attempted. Compared with synthesis of monomeric imides, the imide formation in polymeric condition appeared to be a little more sensitive to the reaction condition. The optimum condition for maximum conversion was examined in terms of time, temperature, and the amount of reactants. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1187–1196, 1999     

Preparation of well‐defined block copolymer having one polystyrene segment and another poly(styrene‐alt‐maleic anhydride) segment with RAFT polymerization

Block copolymers, polystyrene‐b‐poly(styrene‐co‐maleic anhydride), have been prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization technique using three different approaches: 1‐phenylethyl phenyldithioacetate (PEPDTA) directly as RAFT agent, mediated polystyrene (PS) block as the macromolecular PS‐RAFT agent and mediated poly(styrene‐maleic anhydride) (SMA) block with alternating sequence as the macromolecular SMA‐RAFT agent. Copolymers synthesized in the one‐step method using PEPDTA as RAFT agent possess one PS block and one SMA block with gradient structure. When the macromolecular RAFT agents are employed, copolymers with one PS block and one alternating SMA block can be produced. However, block copolymers with narrow molecular weight distribution (MWD) can only be obtained using the PS‐RAFT agent. The MWD deviates considerably from the typical RAFT polymerization system when the SMA is used as the RAFT agent. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effect of ethylene–acrylate–(maleic anhydride) terpolymer on mechanical properties and morphology of poly(ethylene terephthalate)/polyamide‐6 blends

Background: Poly(ethylene terephthalate) (PET)/polyamide‐6 (PA‐6) blends are promising for engineering and food‐packaging applications. However, their poor toughness limits their use. In this study, an ethylene–acrylate–(maleic anhydride) terpolymer (E‐AE‐MA) was added to PET/PA‐6 blends in order to improve the toughness. Results: Izod impact tests indicated an excellent toughening effect of E‐AE‐MA. E‐AE‐MA particles were observed to be selectively dispersed at the interface between PET and PA‐6 phases and in the domain of the PA‐6 phase. Fourier transform infrared spectroscopy and differential scanning calorimetry results demonstrated that the formation of E‐AE‐MA layers around PA‐6 particles cut off the interaction between PET and PA‐6, resulting in an enlarged PA‐6 phase domain. Conclusion: Based on the experimental results, a core–shell microstructure, with PA‐6 as a hard core and E‐AE‐MA as a soft shell, could be suggested. The formation of this core–shell microstructure, along with the increased PA‐6 phase domain size, is the main toughening mechanism of E‐AE‐MA in PET/PA‐6 blends. Copyright © 2007 Society of Chemical Industry     

Blends of acrylonitrile–butadiene–styrene/waste poly(ethylene terephthalate) compatibilized by styrene maleic anhydride

Waste poly(ethylene terephthalate) (PET) from thin bottles was blended with acrylonitrile–butadiene–styrene (ABS) copolymer in different proportions, up to 10 wt %. Styrene maleic anhydride (SMA) copolymer was used as a compatibilizer. The tensile strength and heat deflection temperature of the blend were higher than that of virgin ABS. Flexural modulus remained unaffected, although a slight decrease in impact property was observed. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2593–2599, 2001     

Poly(dimethylsiloxane‐b‐styrene) diblock copolymers prepared by reversible addition–fragmentation chain‐transfer polymerization: Synthesis and characterization

Well‐defined poly(dimethylsiloxane‐b‐styrene) diblock copolymers were prepared by reversible addition–fragmentation chain‐transfer (RAFT) polymerization. Monohydroxyl‐terminated polydimethylsiloxane was modified to form a functional polydimethylsiloxane/macro‐RAFT agent, which was reacted with styrene to form the diblock copolymers. The chemical compositions and structures of the copolymers were characterized by proton nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and gel permeation chromatography. The surface properties and morphology of the copolymers were investigated with static water contact‐angle measurements, X‐ray photoelectron spectroscopy, transmission electron microscopy, and atomic force microscopy, which showed a low surface energy and microphase separation surfaces that were composed of hydrophobic domains from polydimethylsiloxane segments. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of poly(vinyl acetate) by degenerative transfer polymerization in the presence of iodine

A new curing agent containing maleimide and biphenyl moieties (MIBP) was synthesized by the condensation polymerization of 4,4′-bismethoxymethylbiphenyl and N-(4-hydroxyphenyl)maleimide (HPM). The chemical structure was characterized with Fourier transform infrared (FTIR) spectroscopy, and the molecular weight of the new curing agent was determined by gel permeation chromatography. Curing reactions of O-cresol formaldehyde epoxy (CNE) resin with MIBP were investigated under nonisothermal differential scanning calorimetry, and the exotherm exhibited two overlapping exothermic peaks during the curing process; this was demonstrated by FTIR traces. The Flynn–Wall–Ozawa and Friedman methods were used to examine the kinetic parameters and the kinetic models of the curing processes of the CNE/MIBP mixtures. Both reactions turned out to be nth-order curing mechanisms. Values of the reaction order (n) = 1.42 and activation energy (E_a) = 91.2 kJ/mol were obtained for the first reaction of the curing of the CNE/MIBP system, and values of n = 1.11 and E_a = 78.7 kJ/mol were obtained for the second reaction. The thermal properties of the cured resin were measured with thermogravimetric analysis, and the results show a high glass-transition temperature (T_g = 155°C), good thermal stability (temperature at 10% weight loss, under nitrogen and in air, ≈ 400 and 408°C, respectively), and high char yield (temperature = 800°C, char residue = 44.5% under nitrogen). These excellent thermal properties were due to the introduction of the maleimide and biphenyl groups of MIBP into the polymer structure. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Ab initio reversible addition–fragmentation chain transfer emulsion polymerization of styrene/butyl acrylate mediated by poly(acrylic acid)‐block‐polystyrene trithiocarbonate

Ab initio reversible addition–fragmentation chain transfer (RAFT) emulsion polymerization of styrene/butyl acrylate was investigated with the trithiocarbonate macro‐RAFT agent poly(acrylic acid)‐block‐polystyrene (PAA‐b‐PS) as a stabilizer and a RAFT agent. Influences of the amount of ammonium persulfate (APS), the amount of PAA‐b‐PS and the mass ratio of monomers on emulsion polymerization and film properties are discussed. The particle morphology exhibited spherical‐like structure with particles of about 90 nm in diameter and relatively narrow particle size distribution characterized using transmission electron microscopy and dynamic laser scattering. Fourier transform infrared and ¹H NMR spectra showed that the styrene/butyl acrylate emulsion was successfully synthesized. The monomer conversion increased initially with increasing amount of APS, from 0.4 up to 0.8 wt%, and then decreased. The particle size increased and its distribution decreased gradually with increasing amount of APS. The monomer conversion increased from 76.83 to 94.21% as the amount of PAA‐b‐PS increased from 3 to 4 wt%, and then decreased with further increase of PAA‐b‐PS. The particle size decreased and its distribution increased with increasing amount of PAA‐b‐PS. The water resistance and solvent resistance of the polymer films initially increased and then decreased with decreasing mass ratio of butyl acrylate to styrene. © 2014 Society of Chemical Industry     

Study of poly(methyl methacrylate–maleic anhydride)/silica hybrid materials

Poly(methyl methacrylate–maleic anhydride) [P(MMA–MAn)] with active groups, anhydrides, was synthesized by radical copolymerization. Using P(MMA–MAn) as a basic polymer, the P(MMA–MAn)/SiO₂ hybrid materials were obtained by a sol–gel process in different ways. The structures of the materials were characterized by IR spectra, and their properties were studied by thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), and dynamic analysis (DA). The results show that the hybrids prepared in different ways have different properties, and the contents of SiO₂ also have influence on the properties of the hybrids. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 379–383, 2000     

Evolutionary computing approach for evaluating flory distribution curves in gel permeation chromatography: Study of the poly(1‐octene) system

We carried out deconvolution of the molecular weight distribution curves from gel permeation chromatography for polyolefins into individual active sites considering Flory distribution by an evolutionary‐computing‐based real‐coded genetic algorithm, a nonlinear multivariate optimization algorithm. We applied the deconvolution to homopolymers of 1‐octene synthesized using heterogeneous Ziegler–Natta catalysts with different amounts of hydrogen. The molecular weight distribution was deconvoluted in to five Flory distributions, which showed a sensitivity to hydrogen amounts. With no hydrogen presence, the peaks corresponding to high‐molecular‐weight fractions were intense. As the amount of hydrogen was increased, not only did the intensities of the high‐molecular‐weight peaks decrease, but also peaks corresponding to low‐molecular‐weight fractions were observed. The method allowed us to determine the active site distribution of the polymer molecular weight distribution obtained from gel permeation chromatography. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and properties of fluoroalkyl end‐capped sulfobetaine polymers

A variety of fluoroalkyl end‐capped 3‐[N‐(3‐acrylamido)propyl‐N,N‐dimethylammonio]propanesulfonate polymers [R_F–(APDAPS)_n–R_F] were prepared by the reactions of fluoroalkanoyl peroxides with the corresponding monomer under very mild conditions. Similarly, fluoroalkyl end‐capped 2‐vinylpyridinio propane sulfonate polymer was obtained by the use of fluoroalkanoyl peroxide. These fluoroalkyl end‐capped sulfobetaine polymers exhibited a good solubility in water; however, these polymers have a poor solubility in other solvents. In particular, R_F–(APDAPS)_n–R_F polymers caused gelation in methanol, although R_F–(VPPA)_n–R_F polymer showed no gelation in methanol. R_F–(APDAPS)_n–R_F polymers were found to form the self‐assembled molecular aggregates with the aggregations of the end‐capped fluoroalkyl segments and the ionic interactions between sulfobetaine segments in aqueous solutions. On the other hand, it was suggested that R_F–2‐vinylpyridinio propane sulfonate (VPPS)_n–R_F polymer is not likely to form the self‐assemblies in aqueous solutions because of the steric hindrance of pyridiniopropyl betaine units in polymer. We also studied the surfactant properties of R_F–(APDAPS)_n–R_F and R_F–(VPPS)_n–R_F polymers compared with those of other fluoroalkyl end‐capped betaine‐type polymers such as 2‐acrylamido‐2‐methylpropanesulfonic acid polymers and 2‐(3‐acrylamidopropyldimethylammonio) ethanoate polymers. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1144–1153, 2004     

Preparation of poly(tert‐butyl acrylate)‐poly(acrylic acid) amphiphilic copolymers via radiation‐induced reversible addition–fragmentation chain transfer mediated polymerization of tert‐butyl acrylate

Poly(tert‐butyl acrylate) (PtBA) is a versatile hydrophobic macromolecule usually preferred in the development of new materials for a host of applications. PtBA homopolymers with well‐defined structure and controlled molecular weight in a wide range were successfully synthesized via radiation‐induced reversible addition–fragmentation chain transfer (RAFT) polymerization in the presence of a trithiocarbonate type RAFT agent. The polymerization of tBA was performed under ⁶⁰Co γ‐irradiation in the presence of 2‐(dodecylthiocarbonothioylthio)‐2‐methylpropionic acid (DDMAT) as the RAFT agent in toluene at room temperature with three [tBA]/[DDMAT] ratios (400, 600 and 1000) and different irradiation times. Radiation‐induced polymerization of tBA displayed controlled free radical polymerization characteristics: a narrow molecular weight distribution (M_w/M_n ~ 1.1), pseudo first order kinetics and controlled molecular weights. The system followed the RAFT polymerization mechanism even at very low amounts of RAFT agent ([tBA]/[DDMAT] = 1000), and molecular weights up to 113 900 with narrow dispersity (Ð =1.06) were obtained. PtBA was further hydrolysed into different amphiphilic PtBA‐co‐poly(acrylic acid) (PAA) copolymers by low (27.5%) and high (77.3%) degrees of hydrolysis. The pH sensitivity of the two copolymers was investigated by dynamic light scattering at pH 2 and pH 9 (above and below the pK_a value of PAA) and their hydrodynamic diameters and zeta potential values were determined. © 2020 Society of Chemical Industry     

Synthesis and characterization of biodegradable block copolymers of poly(propylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol) and poly(ethylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol)

The synthesis of two low molecular weight linear unsaturated oligoester precursors, poly(propylene fumarate‐co‐sebacate) (PPFS) and poly(ethylene fumarate‐co‐sebacate) (PEFS), are described. PPFS, PEFS, and poly(ethylene glycol) are then used to prepare poly(propylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol) (PPFS‐co‐PEG) and poly(ethylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol) (PEFS‐co‐PEG) block copolymers. The products thus obtained are investigated in terms of the molecular weight, composition, structure, thermal properties, and solubility behavior. A number of design parameters including the molecular weights of PPFS, PEFS, and PEG, the reaction time in the polymer synthesis, and the weight ratio of PEG to PPFS or to PEFS are varied to assess their effects on the product yield and properties. The hydrolytic degradation of PPFS‐co‐PEG and PEFS‐co‐PEG in an isotonic buffer (pH 7.4, 37°C) is investigated, and it is found that the fumarate ester bond cleaves faster than does the sebacate ester bond. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 295–300, 2004     

Compatibility and thermal properties of poly(acrylonitrile–butadiene–styrene) copolymer blends with poly(methyl methacrylate) and poly(styrene‐co‐acrylonitrile)

The mechanical and heat‐resistant properties of acrylonitrile–butadiene–styrene (ABS) binary and ternary blends were investigated. The relationship of compatibility and properties was discussed. The results show that poly(methyl methacrylate) (PMMA) and styrene–maleic anhydride (SMA) can improve the thermal properties of conventional ABS. The Izod impact property of ABS/PMMA blends increases significantly with the addition of PMMA, whereas that of ABS/SMA blends decreases significantly with the addition of SMA. Blends mixed with high‐viscosity PMMA are characterized by higher heat‐distortion temperature (HDT), and their heat resistance is similar to that of blends mixed with SMA. For high‐viscosity PMMA, from 10 to 20%, it is clear that blends appear at the brittle–ductile transition, which is related to the compatibility of the two phases. TEM micrographs show low‐content and high‐viscosity PMMA in large, abnormally shaped forms in the matrix. Compatibility between PMMA and ABS is dependent on both the amount and the viscosity of PMMA. When the amount of high‐viscosity PMMA varied from 10 to 20 wt %, the morphology of the ABS binary blends varied from poor to satisfactory compatibility. As the viscosity of PMMA decreases, the critical amount of PMMA needed for the compatibility of the two phases also decreases. SMA, as a compatibilizer, improved the interfacial adhesiveness of ABS and PMMA, which results in PMMA having good dispersion in the matrix. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2652–2660, 2002     

Preparation of nano‐sized poly(ethylene oxide) star microgels via reversible addition‐fragmentation transfer polymerization in selective solvents

Poly(ethylene oxide) (PEO) star microgels with a cross‐linked polystyrene core were successfully prepared by reversible addition‐fragmentation transfer polymerization of styrene (St) and divinylbenzene (DVB) with dithiobenzoate‐terminated PEO monomethyl ether (DTB‐MPEO) as macro chain transfer agent in mixtures of ethanol and tetrahydrofuran (THF). The formation of star polymers was affected by polymerization time, solvents and St:DVB:DTB‐MPEO molar ratios. Narrow polydispersed star microgels with high molecular weight were obtained under appropriate polymerization conditions. Transmission electron micrographs suggest that PEO star polymers could form nano‐size spherical micelles in mixtures of water and THF, which further demonstrates the amphiphilic nature of the star polymers. Copyright © 2006 Society of Chemical Industry