共查询到20条相似文献,搜索用时 125 毫秒
1.
纳米二氧化钛的性质及应用进展 总被引:1,自引:0,他引:1
纳米二氧化钛微粒具有大的比表面积,其表面原子数、表面能和表面张力随粒径的下降急剧增加,由于其尺寸的细微化,表现出独特的物理和化学特性,导致纳米二氧化钛微粒的热、光、敏感特性和表面稳定性等方面不同于常规粒子,这就使其在环境、信息、材料、能源、医疗与卫生等领域有着广阔的应用前景。综述了纳米二氧化钛的性质,并介绍了近年来纳米二氧化钛的应用研究发展动态。 相似文献
2.
3.
纳米二氧化钛的制备工艺与应用进展 总被引:4,自引:0,他引:4
论述了国内纳米二氧化钛微粒制备工艺的进展,重点论述了液相法制备纳米二氧化钛的相关技术进展。提及纳米微粒的改性技术和表征方法。最后论述了纳米二氧化钛作化工材料的应用进展。 相似文献
4.
纳米二氧化钛微粒具备良好的耐候性、耐化学腐蚀性,且抗紫外线能力强,透明性优异,从而使得它在环境、信息材料、能源、医疗与卫生领域有着广阔的应用前景.但在实际应用中,由于纳米二氧化钛极性强,易团聚,使其优异性能得不到发挥.因此,纳米二氧化钛的各种修饰与改性已成为纳米材料科学的研究热点.从纳米二氧化钛的性质与应用、纳米二氧化钛材料的掺杂改性等方面对其研究现状进行了综述,并对其未来研究进行了展望. 相似文献
5.
6.
纳米二氧化钛表面改性与应用研究进展 总被引:1,自引:0,他引:1
纳米二氧化钛作为一种重要的纳米材料,在陶瓷材料、催化剂载体等领域有着广泛的应用。在纳米二氧化钛粉体的工业化生产中,表面处理技术是必不可少的关键步骤之一,因为改性方法的选取以及包覆物的性质会直接影响产品的应用范围。在综合分析相关文献的基础上,概述了有关纳米二氧化钛粉体表面包覆的相关机理、方法和制备过程中的控制因素等内容;主要介绍了近几年世界纳米二氧化钛粉体表面改性的研究成果及进展,并提出了今后的研究方向。 相似文献
7.
8.
9.
本文详细介绍了纳米二氧化钛光催化材料的作用和基本特性。介绍了纳米二氧化钛超亲水性原理及应用方面的分类。对纳米二氧化钛的基本制备方法和应用进行了探讨。总结了光催化材料在实用技术和应用方面存在的问题,并对其今后的发展方向进行了前景展望。 相似文献
10.
11.
纳米Al2O3/环氧树脂复合材料的制备及性能 总被引:11,自引:1,他引:11
在原位法制备纳米复合材料时,要使纳米粒子在树脂中分散均匀,必须首先获得稳定的单体悬浮体系。基于这一原理,本文通过对纳米Al2O3表面改性即选择合适的分散剂,获得稳定的纳米Al2O3/丙酮悬浮液,然后将环氧树脂溶解于其中,制得纳米Al2O3/环氧树脂复合材料。运用透射电子显微镜,观察了纳米Al2O3在环氧基体中的分散情况。分析并讨论了纳米Al2O3含量对该复合材料力学性能的影响。结果表明:利用稳定的悬浮体系能制得分散较为均匀的纳米复合材料,在纳米Al2O3含量为5%的情况下,纳米复合材料的力学性能达到最优。 相似文献
12.
13.
14.
15.
16.
17.
《Propellants, Explosives, Pyrotechnics》2017,42(2):158-166
This study presents a comparison of commercially available titania nano‐particles produced using electric wire explosion with nano‐particles manufactured by the authors using a sol‐gel synthesis process. For the present study, 20‐nm titania was purchased off‐the‐shelf. It was determined to be rough spheres of 20 nm forming large, micron‐sized agglomerates, whereas particles synthesized using the sol‐gel process were found to be fundamentally 10 nm but with sub‐micron agglomerations thereof. The nano‐titania was added to 80% AP monomodal propellants at 0.3% and 1.0% by mass. Additional, 85% bimodal‐AP mixtures were made, comparing commercial titania to the laboratory‐synthesized particles at 1.0% by mass. Another set of samples compared a method of pre‐mixing the synthesized additives directly into the binder material at 0.3% by mass of laboratory titania; two additional pre‐mixed titania batches at 0.5% by mass were doped with either Fe or Cu into the nanocrystals. All propellants were tested up to 13.8 MPa at 3.8 MPa increments. Dry powder laboratory additives show a 60‐to‐100% increase in burning rate over the baseline samples with no catalyst and a 20‐to‐30% increase over the commercial nano‐particles. Pre‐mixed additives were found to produce similar burning rate increases but with lower concentrations required. This latest generation of particle synthesis techniques was further demonstrated in this study to have great potential for future propellant catalyst development. 相似文献
18.
纳米药物作为纳米技术与医药技术的重要组成部分,受到了全世界学术界和产业界的重视。药物纳米化工程及应用是研究的热点问题。本文总结了液相沉淀法制备纳微结构药物颗粒的基本原理和方法,综述了近年来本课题组在药物构型的密度泛函计算以及液相沉淀法制备纳微结构药物颗粒方面的学术和产业化成果。针对不同药物体系的特性,提出了采用反溶剂沉淀法、反应沉淀法、反溶剂与反应耦合沉淀法以及分子自组装沉淀法等来制备纳微结构药物颗粒,阐述了超重力可控沉淀技术在制备纳微结构药物颗粒方面的工业化应用前景。 相似文献
19.
20.
《国际聚合物材料杂志》2012,61(13):999-1010
Epoxy-based nanocomposites containing functionalized nanoscale TiO2 with 0.5%, 1%, 5%, and 10% by weight were developed. A coupling agent was employed to functionalize nano titania for better compatibility of nanoscale particles with dispersing media. Under sliding conditions, the specific wear rate and coefficient of friction were evaluated. The dispersion of fillers in the matrix was also studied using scanning electron microscopy. The wear mechanism is studied in correlation with a micrograph of the worn-out surface of nanocomposites. The various mechanical properties and thermal stability were studied and the influences of nanofiller loading on these parameters were observed. 相似文献