介孔有机硅分子筛表面的碱改性及其催化性能

采用水热法直接合成出表面含有机碱中心的介孔有机硅分子筛PMOs催化剂.XRD分析结果表明,3种有机碱改性的催化剂都具有介孔分子筛的完整晶体结构.红外光谱IR分析结果证明了在分子筛的表面含有机碱基团.热失重（TGA）分析认为各种有机碱中心在有机介孔分子筛表面的热稳定性高于300 ℃,骨架中的乙烷基在低于500 ℃下保持稳定.甲醇与十八碳烯酸的酯化反应结果表明,十八碳烯酸的转化率随碱强度和碱中心数增加而升高,催化剂活性的顺序为PMO-DN>PMO-Py>PMO-N;3个催化剂反应后的XRD衍射强度比反应前都加强,分析认为与模板剂的脱除方法——碱化乙醇溶液有关.     

HMS介孔分子筛合成及其在丙烷脱氢制丙烯反应中的应用

分别以正硅酸乙酯和伯胺表面活性剂为原料和模板剂成功制备HMS介孔分子筛，经负载活性组分后得到Pt-Sn/HMS催化剂并将其应用于丙烷脱氢制丙烯反应。探究合成过程中伯胺表面活性剂碳链长度及水和乙醇的比例对HMS介孔分子筛孔结构的影响。XRD和N₂吸附-脱附等分析结果表明，模板剂链长增长时，介孔分子筛孔径、孔壁厚、比表面积及孔容均增大。适当的水/乙醇比例有利于获得更大比表面积和孔体积的介孔分子筛，并表现出更有序的介孔结构。丙烷脱氢制丙烯反应评价和热分析等表征结果表明，HMS介孔分子筛孔道特征直接影响Pt-Sn/HMS催化剂的催化性能。使用孔体积且比表面积较大的HMS样品作为载体制备的脱氢催化剂在丙烷脱氢反应中表现出优异的催化活性。性能最优的Pt-Sn/HMS-0.60-16催化剂上，平均丙烷转化率达到46.5%,平均丙烯选择性为94.1%,反应24 h后积炭量仅为质量分数3.4%。     

金属改性的FSM-16分子筛催化苯与过氧化氢合成苯酚

研究了金属改性的FSM-16分子筛在催化苯与过氧化氢合成苯酚反应中的应用,其中钒改性的FSM-16分子筛显示了较好的活性和高的选择性。当温度为323 K,反应时间为10 h,n(H2O2)∶n(C6H6)=1∶1,乙酸作溶剂,在催化剂V-FSM-16上得到苯的转化率为5.8%,苯酚的选择性为98.8%。催化剂的红外光谱和XRD的表征表明,钒进入了分子筛的骨架中。     

有机官能化介孔催化剂制备及其在正丁醛自缩合制辛烯醛反应中的应用

通过表面接枝法将3-氨丙基三甲氧基硅烷、N-氨乙基-g-氨丙基三甲氧基硅烷和N,N-二乙基氨丙基三甲氧基硅烷嫁接在MCM-41介孔分子筛表面,制得3种相应有机胺官能介孔固体碱催化剂NH2-MCM, NH2NH-MCM及NR2-MCM,并利用2-氰乙基三甲氧基硅烷对NH2-MCM进行了修饰,制得NH2-MCM-COOH酸碱双功能催化剂,对所制催化剂进行了性能表征,将其用于正丁醛自缩合制辛烯醛反应,研究了催化剂的催化性能. 结果表明,相同反应条件下,3种催化剂中NH2-MCM的催化效果最好,在用量为0.3 mmol胺时反应10 h,辛烯醛产率达70%以上;NH2-MCM-COOH用量为0.15 mmol胺时反应10 h,辛烯醛产率约为NH2-MCM的2倍,表明催化剂表面碱性有机胺基团和酸性基团具有明显的酸碱协同效应,可显著促进正丁醛缩合反应.     

苄基磺酸化MCM-41介孔分子筛的合成、表征及催化酯化性能

MCM-41介孔分子筛先后与苄基氯和氯磺酸接枝反应,得到苄基磺酸介孔分子筛(SBM)。通过X射线多晶衍射(XRD)、氮气吸附脱附、红外光谱(IR)、有机元素分析、扫描电镜(SEM)等方法对所得样品进行了表征。研究结果表明,MCM-41表面硅羟基与苄基氯反应,接枝量w(C)=6.68%;进一步磺化,接枝率w(S)=8.46%。XRD等分析结果表明,经过两步接枝反应,SBM仍然具有介孔结构特征,比表面积和孔容分别为366.9 m2/g、0.349 cm3/g。以SBM为催化剂,催化合成柠檬酸三丁酯;在n(酸)∶n(醇)=1.0∶9.0,w(催化剂)=3%,反应温度110℃,回流时间7 h的条件下,柠檬酸转化率可达93.2%;催化剂重复使用4次柠檬酸转化率为76.3%。     

含钛介孔分子筛的合成与催化性能

论述了含钛介孔分子筛的水热合成、室温合成、微波合成和选择不同模板剂与嫁接法等合成方法及其特点。对含钛介孔分子筛的表面修饰与改性技术进行了概述。总结了含钛介孔分子筛在催化氧化、烯烃环氧化、羟基化和光催化等反应中的催化性能。指出今后的研究方向是:高水热稳定性含钛介孔分子筛的合成方法;通过对含钛介孔分子筛进行表面修饰,制备出具有独特性能的催化材料;含钛介孔分子筛在光催化及其他催化反应中的催化作用机理。     

介孔分子筛MCM-41在有机催化中的研究进展

介绍了近几年MCM-41在环氧化、加氢反应、烷基化、酯化等有机反应中的应用。介孔分子筛MCM-41具有较高的比表面和规整的结构,以及表面带有羟基,是催化剂的优良载体。因此,可以将催化剂引入到MCM-41的结构中,从而提高其性能。认为应在介孔分子筛的水热稳定性、研究合成机理、合成方法等方面加强研究,对介孔分子筛在有机化工催化领域中的应用现状及前景进行了分析。     

M/SBA-15(M=Cu、Fe、Cr)介孔分子筛的制备、表征及其催化NO+CO反应研究

以介孔分子筛SBA-15为载体,采用浸渍法制备M/SBA-15(M=Cu、Fe、Cr) 介孔分子筛催化剂。采用XRD、BET、FT-IR、H₂-TPR和XPS等对样品进行分析表征,在固定床微型反应器中评价M/SBA-15(M=Cu、Fe、Cr)分子筛催化剂催化NO+CO的反应性能。结果表明,负载金属的SBA-15分子筛仍保持高度有序的二维六方介孔结构,比表面积和孔径略有减少,负载的活性金属组分在SBA-15分子筛表面具有较高的分散度。Cu/SBA-15、Cr/SBA-15和Fe/SBA-15催化剂对NO+CO反应体系均有一定活性,但由于活性金属自身的特性及其在载体表面负载量的差异,3种催化剂上呈现的NO还原活性不同,顺序为：Cr/SBA-15＞Cu/SBA-15＞Fe/SBA-15。     

苄基磺酸化MCM-41介孔分子筛的合成、表征及性能研究

MCM-41介孔分子筛分别与苄基氯和氯磺酸接枝反应,得到苄基磺酸介孔分子筛（SBM）。通过X射线多晶衍射（XRD）、氮气吸附脱附、红外光谱（IR）、有机元素分析、扫描电镜（SEM）等方法对所得样品进行了表征。研究结果表明,MCM-41表面硅羟基与苄基氯反应,C接枝量（w%）达到5.84%。进一步磺化,S接枝率（w%）可达7.46%。XRD等分析结果表明,经过两步接枝反应,SBM仍然具有介孔结构特征,比表面积和孔容分别为366.9 m2•g-1、0.349 cm3•g-1。以SBM为催化剂,催化合成柠檬酸三丁酯。结果表明,当n(酸)：n（醇）=1.0∶9.0,w（cat）=3%,反应温度为110 ℃,回流时间7 h,酯化率可达93.22%。且催化剂可重复使用,重复五次,酯化率仍然为76.33%。     

碱处理改性对Zn/HZSM-5分子筛催化剂性能的影响

以不同浓度的NaOH溶液对HZSM-5分子筛进行碱处理改性后所得多级孔ZSM-5分子筛作为活性组分制备甲醇制芳烃催化剂,采用XRD、SEM、NH3-TPD和N2吸-脱附等手段对催化剂进行了表征,分别考察了碱处理改性对分子筛催化剂骨架结构、酸性质、孔结构以及催化性能的影响.结果表明,通过合适浓度的NaOH碱溶液处理后,HZSM-5分子筛在保持微孔骨架结构的同时,可以调变其晶内介孔孔道结构分布以及酸性质.随着NaOH碱溶液浓度升高,HZSM-5分子筛的酸量、介孔孔容、介孔表面积都增加、孔容分布变宽,催化剂的活性和稳定性等催化性能得以改善.HZSM-5分子筛碱处理改性适宜的NaOH溶液浓度为0.4 mol/L,改性后的催化剂芳烃收率由25.07％增加到32.22％,使用寿命由8d增加到16d,但NaOH溶液浓度超过0.6 mol/L后会严重破坏HZSM-5分子筛骨架结构,催化活性下降较快.     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。