本体聚合法制备低分子量水基钻井液降粘剂

采用本体聚合的方法,以苯乙烯(St)和马来酸酐(MA)为原料制备苯乙烯-马来酸酐聚合物(SMA),采用氯磺酸进一步磺化后得到低分子量的水基钻井液降粘剂磺化苯乙烯-马来酸酐(SSMA)。研究了单体配比、聚合温度、引发剂用量以及链转移剂用量对产物降粘性能的影响。结果表明,SMA的最佳合成条件为:在St与MA的摩尔比为1∶1的条件下,聚合温度为65℃,引发剂的用量为单体总质量的1.5%,链转移剂的用量为单体总质量的4%,经磺化改性制得的SSMA降粘剂能显著降低钻井液的粘度。利用红外光谱仪、凝胶色谱仪和差热分析仪对聚合物进行表征,可知所合成的聚合物结构与设计结构基本一致,重均分子量在3 000⁵ 000之间,分子量较低;通过热重分析曲线可知,在289℃左右失重保持在90%以上,聚合物热稳定性能良好。     

本体聚合法制备低分子量水基钻井液降粘剂

采用本体聚合的方法,以苯乙烯(St)和马来酸酐(MA)为原料制备苯乙烯-马来酸酐聚合物(SMA),采用氯磺酸进一步磺化后得到低分子量的水基钻井液降粘剂磺化苯乙烯-马来酸酐(SSMA)。研究了单体配比、聚合温度、引发剂用量以及链转移剂用量对产物降粘性能的影响。结果表明,SMA的最佳合成条件为:在St与MA的摩尔比为1∶1的条件下,聚合温度为65℃,引发剂的用量为单体总质量的1.5%,链转移剂的用量为单体总质量的4%,经磺化改性制得的SSMA降粘剂能显著降低钻井液的粘度。利用红外光谱仪、凝胶色谱仪和差热分析仪对聚合物进行表征,可知所合成的聚合物结构与设计结构基本一致,重均分子量在3 000~5 000之间,分子量较低;通过热重分析曲线可知,在289℃左右失重保持在90%以上,聚合物热稳定性能良好。     

超支化苯乙烯-马来酸酐共聚物酯化物的制备及应用

以醇为酯化剂,对超支化苯乙烯-马来酸酐(BPSMA)进行酯化,考察了反应温度、时间、酯化剂结构及用量等对超支化苯乙烯-马来酸酐酯化物(BPSME)酯化度的影响,在优化实验的基础上制备了以甲醇为酯化剂的超支化苯乙烯-马来酸酐共聚物酯化物(M-BPSME),探讨了M-BPSME对颜料红122的分散性能。结果表明BPSMA与甲醇发生了酯化反应,且较佳的反应时间为6 h,酯化温度80℃。分散结果表明,相同条件下线型苯乙烯马来酸酐(LPSMA)、BPSMA、M-BPSME对颜料红122的分散效率为M-BPSMEBPSMALPSMA,且MBPSME作分散剂的颜料分散体系的离心稳定性和冻融稳定均在97%以上。     

溶液聚合法合成苯乙烯-马来酸酐交替共聚物

在过氧化苯甲酰(BPO)引发下,以丁酮为溶剂,采用溶液聚合法合成了苯乙烯-马来酸酐共聚物,并详细研究了温度、引发剂用量、苯乙烯与马来酸酐配比、单体(苯乙烯与马来酸酐)质量分数及聚合时间对聚合反应的影响。研究表明,在温度80℃,x(BPO)=0.6%(相对于苯乙烯与马来酸酐),n(苯乙烯)∶n(马来酸酐)=1∶1,w(单体)=15%(相对于混合溶液),反应时间4 h的条件下,聚合物收率可达99%。采用13CNMR、IR、GPC、元素分析对共聚物结构进行了表征。利用TG测定了其热稳定性。结合共聚物的元素分析与13CNMR的分析结果,表明合成的苯乙烯-马来酸酐共聚物是一种交替共聚物。     

IA—SSS—MA共聚物的合成与阻垢机理研究

以衣康酸、苯乙烯磺酸钠、马来酸酐为单体,采用水溶液自由基聚合方法合成衣康酸-苯乙烯磺酸钠-马来酸酐共聚物．静态试验条件下探讨了共聚物投加量、钙离子质量浓度对共聚物阻垢率的影响;利用电视显微电泳仪和透射电镜对阻垢机理进行了初步研究。实验结果表明：衣康酸-苯乙烯磺酸钠-马来酸酐共聚物具有良好的阻垢分散性能,其主要通过螯合增溶作用、静电斥力作用和晶格畸变三方面的作用来实现其阻垢性能。     

相容剂种类对PA6/ABS合金性能的影响

采用苯乙烯-马来酸酐(SMA)、苯乙烯-丙烯腈-马来酸酐(SAMAH)和苯乙烯-丙烯腈-甲基丙烯酸(SAMAA)三种共聚物增容尼龙6/丙烯腈-丁二烯-苯乙烯共聚物(PA6/ABS)共混物,利用双螺杆挤出机制备出PA6/ABS合金,对其结构及其性能进行了表征和探讨。结果表明,三种相容剂均可有效地增容PA6/ABS合金,改善ABS在PA6中的分散,大幅度提高了缺口冲击强度;通过差示扫描量热(DSC)分析发现PA6/ABS的结晶度降低,结晶速率变慢;同时通过流变实验发现PA6/ABS共混物为假塑性流体,三种相容剂均提高了其表观黏度。     

低温合成苯乙烯-马来酸酐交替共聚物

苯乙烯(St)和马来酸酐(MA)自由基引发共聚反应,生成共聚物SMA,是典型的交替共聚。在过氧化苯甲酰(BPO)引发下,以丙酮为溶剂,采用溶液聚合法合成苯乙烯-马来酸酐共聚物,并用收率作为评价标准,对反应条件进行研究。结果表明,在温度为60℃,BPO的质量分数x(BPO)=0.3%,n(苯乙烯)∶n(马来酸酐)=1∶1,w(单体)=30%,反应2 h的条件下,聚合物的收率可达到98.5%。利用化学滴定法测得聚合物中马来酸酐摩尔分数为49.91%,结合理论,证明了合成的苯乙烯-马来酸酐共聚物是一种交替共聚物。一种低温合成苯乙烯-马来酸酐交替共聚物的工艺得到开发。     

PPO/PA合金研究进展

回顾了聚苯醚(PPO)/聚酰胺(PA)合金在近期取得的研究成果。将PPO和PA共混,可以把两者的优点结合起来,但是这两种材料热力学不相容,影响了材料的力学性能。为了达到增容效果,一方面可以添加相容剂,马来酸酐接枝三元乙丙橡胶(EPDM-g-MAH)、苯乙烯-乙烯-丁二烯-苯乙烯嵌段共聚物(SEBS)、苯乙烯-丁二烯-苯乙烯嵌段共聚物(SBS)、苯乙烯-马来酸酐共聚物(SMA)、马来酸酐接枝聚苯醚(PPO-g-MAH)和马来酸酐接枝苯乙烯-乙烯-丁二烯-苯乙烯嵌段共聚物(SEBS-g-MAH)等都具有增容作用;另一方面采用合适的加工工艺,也可以有效增加两者的相容性,改善材料的性能。     

梳状改性苯乙烯-马来酸酐共聚物制备与性能

以靛红酸酐(IA)与聚乙二醇单甲醚550(MPEG550)合成带有伯氨基的活性支链(IP550),并对苯乙烯-马来酸酐共聚物(SMA)进行酰胺化改性,制备出梳状改性SMA(SMA-IP550)。考察了产物的合成条件,并采用FTIR和~1HNMR对SMA-IP550的结构进行表征。结果表明:催化剂(4-二甲氨基吡啶)用量为反应物总质量的0.9%,MPEG550和IA的物质的量比为1∶1,反应温度120℃,反应时间30 min,活性支链IP550产率达79.3%;SMA改性温度为140℃,IP550与SMA中马来酸酐(MA)的物质的量比为0.5∶1,反应体系的固含量30%,反应时间2h,得到接枝率为42.5%的改性苯乙烯-马来酸酐共聚物(SMA-IP550)。通过对比不同长度活性支链改性SMA的分散、降黏、乳化和润湿性能,结果表明该类助剂结构可调,其分散作用以及乳化作用与结构紧密相关。     

α-蒎烯/马来酸酐/苯乙烯三元共聚反应研究

以苯乙烯,α-蒎烯和马来酸酐为原料合成了苯乙烯/α-蒎烯/马来酸酐三元共聚物(STMA).研究了反应温度、反应时间、原料配比、催化剂用量对共聚物产率和软化点的影响,并对共聚物结构进行了分析.结果表明,最佳反应条件为:反应温度为175℃,反应时间为10h,投料比(摩尔比)α-蒎烯:马来酸酐:苯乙烯＝1:1:1;催化剂质量分数为0.5%.红外光谱与核磁共振研究表明:α-蒎烯、马来酸酐与苯乙烯(St)交替共聚倾向较大.用该共聚物与环氧树脂(E-12)进行反应,研究了共聚物用量、固化温度对凝胶时间的影响,实验证明凝胶时间随共聚物用量的减少而延长、随固化温度的升高而缩短.同时研究了其含量对涂料性能的影响.     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。