Coplanar waveguide-fed circularly polarized microstrip antenna

Design of a square microstrip antenna for obtaining circular polarization (CP) radiation using a coplanar waveguide (CPW) feed is presented. This CP design is achieved by insetting a slit to the boundary of the square microstrip patch, which makes possible the splitting of the dominant resonant mode into two near-degenerate orthogonal modes for CP radiation and introducing an inclined slot in the CPW feed line for coupling the electromagnetic (EM) energy of the CPW to the square patch. Good impedance matching for CP operation can be obtained by adjusting the inclined slot length and the tuning-stub length of the CPW feed line. Typical experimental results are presented and discussed     

CPW feed circularly polarised microstrip antenna using asymmetric coupling slot

Design of a coplanar waveguide (CPW) feed square microstrip antenna with circular polarisation (CP) radiation is described. This CP design is achieved by using an asymmetric inductively coupling slot in the ground plane of the CPW feed line. Results show that the proposed antenna can have a CP bandwidth of 2.4%, whereas a simple inclined coupling slot case has 1.6% CP bandwidth at a fixed square patch size. Typical experimental results are presented and discussed     

An offset CPW-fed triple-band circularly polarized printed antenna for multiband wireless applications

An offset coplanar waveguide (CPW)-fed triple-band circularly polarized tilted asymmetrical E-shaped printed antenna for multiband wireless applications is presented in this paper. The antenna mainly consists of a tilted asymmetrical E-shaped patch and excite by a 50 Ω offset CPW feed line using a transformer for impedance matching to generate wide quad operating bands. By properly embedding rectangular slots in the tilted asymmetrical E-shaped patch and triangular stubs loaded modified CPW ground plane, the antenna reveals triple-band circular polarization (CP) features. Numerical analysis and experimental validation of the antenna structure have been carried out and results are presented. The mechanism of triple-band CP operation, analysis of surface current distributions, design procedure, and parametric study of the design is discussed in details. It is well suited for the application of UMTS-2100, 3.5/5.5 GHz WiMAX, 5.2/5.8 GHz WLAN, ITS, downlink of X-band satellite communication, and ITU 8 GHz bands.     

Broadband circularly polarised crosspatch- loaded square slot antenna

A new design of a circularly polarised square slot antenna loaded with a cross patch is presented. A cross patch inclined diagonally with respect to the square slot is placed at the centre of the square slot. By choosing proper dimensions of the cross patch, two orthogonal resonant modes with a 90deg phase difference for circular polarisation can be excited and feed the square slot antenna using a 50 Omega CPW with a protruded signal strip. 10 dB return loss bandwidth of 846 MHz (39.6%) and 3 dB axial ratio bandwidth of 240 MHz (12.4%) for the proposed antenna are achieved. Gain variation within the CP bandwidth is observed to be less than 1 dB     

Broadband printed CPW-fed circular slot antenna

A broadband printed CPW-fed circular slot antenna is proposed. This antenna is composed of a circular slot fed with a 50 /spl Omega/ CPW line through a circular patch. A parametric study was carried out to optimise the proposed structure, and the simulated and measured results show that the proposed design offers an ultra-wide bandwidth of 143.2% (from 2.3 to 13.9 GHz).     

Small slot-coupled circularly-polarised microstrip antenna withmodified cross-slot and bent tuning-stub

A novel design of small slot-coupled circularly-polarised circular microstrip antenna with a modified cross-slot cut in the patch and a bent tuning-stub aligned along the patch boundary is proposed and experimentally studied. Results show that, for fixed circular polarisation (CP) operation, the antenna proposed can have an antenna size reduction of ~80%, as compared to a regular-size CP design. The significant size reduction of the proposed antenna is due to the novel modified cross-slot cut in the patch, and CP operation is obtained using a bent tuning-stub incorporating a properly oriented coupling-slot in the ground plane of the microstrip feed line     

Dual-frequency microstrip antenna with dual circular polarisation

A single-feed dual-frequency microstrip patch antenna that can produce dual circular polarisations (CP) is presented. The microstrip antenna has an annular-ring patch and is excited by an L-shaped microstrip line through the coupling of a ring slot in the ground plane. The occurrence of the dual CP is because the magnetic currents circulating along the ring slot at two specific frequencies have opposite flowing directions. Both simulated and measured results are provided to validate the CP performance of the proposed antenna     

Circularly-Polarized Wide Slot Antenna Loaded With a Parasitic Patch

A design is described of a broadband circularly-polarized (CP) slot antenna. A conventional annular-ring slot antenna is first analyzed, and it is found that two adjacent CP modes can be simultaneously excited through the proximity coupling of an L-shaped feed line. By tuning the dimensions of this L-shaped feed line, the two CP modes can be coupled together and a broad CP bandwidth is thus formed. The design method is also valid when the inner circular patch of the annular-ring slot antenna is vertically raised from the ground plane. In this case, the original band-limited ring slot antenna is converted into a wide-band structure that is composed of a circular wide slot and a parasitic patch, and consequently the CP bandwidth is further enhanced. For the patch-loaded wide slot antenna, its key parameters are investigated to show how to couple the two CP modes and achieve impedance matching. The effects of the distance between the parasitic patch and wide slot on the CP bandwidth and antenna gain are also presented and discussed in details.      

Circular polarised microstrip patch antennas for broadband and dual-band operation

A novel design of microstrip patch antennas for circular polarisation (CP) is proposed. As an example, two CP patch antennas are investigated: a broadband CP patch antenna and a dual-band CP patch antenna. The proposed structure can be achieved by embedding circular holes in the microstrip circular resonator. By changing the size and position of loaded holes, two orthogonal modes are simultaneously excited with equal amplitude and /spl plusmn/90/spl deg/ out of phase. Without any 90/spl deg/ phase-shifter, the proposed CP patch antennas are excited by single feed.     

一种新型圆极化UHF通用型RFID读写器天线

面向超高频(UHF)通用型射频识别(RFID)读写器天线的应用需求,设计了一款完全覆盖全球UHF(840-960MHz)频段的RFID圆极化读写器天线。天线采用平面缝隙贴片结构,以共面波导(CPW)馈电方式实现宽频带圆极化特性。测试结果表明,天线的阻抗带宽为735-1014MHz(S11<-10dB),相对带宽31.9%,并且在840-960MHz频段内S11<-20dB,3dB轴比带宽为838-1134MHz,相对带宽30.0%,工作频带内有大于3.5dBi的平坦增益。仿真结果与测试结果基本吻合,天线结构精简,易于加工,满足全球UHF RFID读写器天线的应用需求。     

Circularly polarised patch antenna array using proximity-coupledL-strip line feed

A microstrip antenna array for circular polarisation (CP) using a proximity L-strip line feed is proposed and experimentally investigated. By placing a cross-slot with unequal slot lengths on the circular patch, circular polarisation can be excited. Also, a sequential rotation technique is adopted for the design of this CP antenna array to widen the bandwidth. The impedance and axial ratio bandwidth values are 78 and 16.15%, respectively. The boresight axial ratio is 0.4 dB at 1.91 GHz     

Axial-ratio bandwidth enhancement of asymmetric-CPW-fed circularly-polarised square slot antenna

A novel broadband circularly-polarised (CP) square slot antenna fed by an asymmetric coplanar waveguide (CPW) from a corner of the slot is proposed. A CP bandwidth larger than 10% can be attained simply by using an inverted-L tuning stub protruded from the signal line of the CPW. With an additional pair of grounded strips implanted in the slot, the 3 dB axial-ratio bandwidth and the VSWR ⩽ 2 impedance bandwidth can be greatly raised to be as high as 30 and 35%, respectively.     

Miniaturized wideband dual linearly and circularly polarized printed square slot antenna for multiradio wireless systems

A dual symmetrical coplanar waveguide (CPW)-fed small size wideband printed square slot antenna (SSA) with dual linearly and circularly polarized radiation capability is presented. The antenna is composed using a square slot, two symmetrical orthogonal CPW feed lines connected to horizontal and vertical arm of L-shaped radiator, an embedded parasitic inverted-L strip at the lower left corner of the square ground slot and engraving slots in the ground plane. Circular polarization (CP) is achieved due to two orthogonal CPW feed lines and a common L-shaped radiator. Isolation between ports is improved by engraving slots at the lower left corner of ground plane and embedded parasitic inverted-L strip. The sense of dual-polarization can be changed in pass-band by changing the port excitation. Measured antenna reveals that an 84.4% (4.6 GHz, 3.15–7.75 GHz) −10 dB impedance bandwidth (IBW) and about 33% (2.03 GHz, 5.12–7.15 GHz) 3-dB axial ratio bandwidth (ARBW). Isolation between ports <−16 dB is achieved over usable CP band.     

X‐Band Phased Array Antenna Using Ferroelectric (Ba,Sr)TiO3 Coplanar Waveguide Phase Shifter

A phased array antenna was fabricated using four‐element ferroelectric phase shifters with a coplanar waveguide (CPW) transmission line structure based on a Ba0.6Sr0.4TiO3(BST)/MgO structure. Epitaxial BST films were deposited on MgO (001) substrates by pulsed laser deposition. To attain the large differential phase shift and small losses for a ferroelectric CPW phase shifter, an impedance‐matching‐part adding technique between the effective transmission line and connecting cable was used. The return loss and insertion loss for this technique‐adapted BST CPW device were improved with respect to those for a normal BST CPW device. For an X‐band phased array antenna system consisting of ferroelectric BST CPW phase shifters, power divider, dc block, patch antenna, and programmed dc power, the steering beam could be tilted by 15° in either direction.     

一款UHF 波段小型化RFID 天线的设计

随着太赫兹成像技术的快速发展,太赫兹成像研究过程中对测试系统提出了大带宽、高性能、通用性强及使用灵活性高等要求,针对这一需求,提出了用通用测试仪器构建太赫兹成像系统的思路:充分利用了通用仪器频率覆盖宽、指标高、通用性强等特点,使得构建的系统指标更高;充分利用了毫米波扩频模块的标准化、模块化设计思路,可实现成像系统测试频段的灵活更换。利用构建的成像系统进行的成像试验结果验证了方法的可行性,能够满足太赫兹成像研究人员快捷方便构建高性能成像系统的要求。     

一种双频双圆极化微带天线的设计

提出了一种仅利用单端口馈电的共口径双频双圆极化微带天线。天线通过在对应高端谐振频率的圆形贴片外层附加对应低端谐振频率的圆环形贴片,并采用四个窄带条连接两贴片,从而实现双频工作;通过在圆形和圆环形贴片外侧开缺口的方式实现了圆极化波辐射,并通过在两贴片上开置的缺口相正交,从而形成了低端右旋圆极化（RHCP）、高端左旋圆极化（LHCP）的特性。对提出的天线进行了仿真并优化设计,给出了该天线在两个谐振频段上具有较好的阻抗匹配和双圆极化性能。     

A New Coupling Mechanism for Circularly Polarized Annular-Ring Patch Antenna

A novel coupling technique for circularly polarized annular-ring patch antenna is developed and discussed. The circular polarization (CP) radiation of the annular-ring patch antenna is achieved by a simple microstrip feed line through the coupling of a fan-shaped patch on the same plane of the antenna. Proper positioning of the coupling fan-shaped patch excites two orthogonal resonant modes with 90 phase difference, and a pure circular polarization is obtained. The dielectric material is a cylindrical block of ceramic with a permittivity of 25 and that reduces the size of the antenna. The prototype has been designed and fabricated and found to have an impedance bandwidth of 2.3% and a 3 dB axial-ratio bandwidth of about 0.6% at the center frequency of 2700 MHz. The characteristics of the proposed antenna have been by simulation software HFSS and experiment. The measured and simulated results are in good agreement.     

Slot-coupled microstrip antenna for broadband circular polarisation

A microstrip antenna with broadband circular polarisation (CP) is presented. The proposed microstrip antenna has a circular patch and is excited by a series microstrip-line-feed configuration through the coupling of a ring slot in the ground plane. The broadband operation is achieved by coupling two CP resonant elements, which are due to the circular patch and the ring slot, respectively. A typical prototype using foam material of thickness 5 mm as the antenna substrate is constructed. Measured results show the 3 dB-axial-ratio bandwidth centred at 2500 MHz is more than 10%.     

Broadband T-shaped microstrip-fed U-slot coupled patch antenna

A U-slot coupled patch antenna with T-shaped microstrip feedline is studied. The characteristics of the proposed antenna depend highly on the length (l_d) of the horizontal as well as the offset position (offset) of the feed line. The measured bandwidth was approximately 76.8% for the VSWR ⩽ 2.0. Experimental results for the radiation patterns with relatively good characteristics are presented     

A Double Rhombus Antenna Fed by 180$^{circ}$ Phase Shifter for Ultrawideband Phased Array Applications

A double rhombus antenna fed through a microstrip 180deg phase shifter is presented. The 180deg phase shifter is a novel design of microstrip-to-coplanar waveguide (CPW)-to-microstrip transition. The proposed phase shifter is obtained without changing the layer of the second microstrip line for an easy embedding into the feedline. Via holes are used to transfer the current from the top to the bottom substrate layer and vice versa. The antenna with the phase shifter is operating in a wide bandwidth from 5.7 and 18.6 GHz (106%), and provides stable endfire radiation patterns. This design is tested in a modified two-element array configuration and proved to have a wide usable bandwidth.