Microbial biofilm detection on food contact surfaces by macro-scale fluorescence imaging

Hyperspectral fluorescence imaging methods were utilized to evaluate the potential detection of pathogenic bacterial biofilm formations on five types of food contact surface materials: stainless steel, high-density polyethylene (HDPE), plastic laminate (Formica), and two variations of polished granite. The main objective of this study was to determine a minimal number of spectral fluorescence bands suitable for detecting microbial biofilms on surfaces commonly used to process and handle food. Spots of biofilm growth were produced on sample surfaces by spot-inoculations of pathogenic Escherichia coli O157:H7 and Salmonella followed by room temperature storage for 3 days. Subsequently, hyperspectral fluorescence images were acquired from 421 to 700 nm using ultraviolet-A excitation. Both E. coli O157:H7 and Salmonella biofilms emitted fluorescence predominantly in the blue to green wavelengths with emission maxima at approximately 480 nm. A single-band image at 559 nm was able to detect the biofilm spots on stainless steel. On HDPE and granite, algorithms using different two-band ratios provided better separation of the biofilm spots from background areas than any single-band images did. The biofilm spots on stainless steel, HDPE, and granite could be detected with overall detection rate of 95%. On Formica, too many false positives were present to accurately determine an effective biofilm detection rate. This may have been due to the lower cell population density that was observed for the biofilm spots grown on Formica (approximately 4.3–6.4 log cfu cm⁻²) as compared to the other surfaces. These findings can be incorporated into developing portable hand-held imaging devices for sanitation inspection of food processing surfaces.     

Inactivation of biofilm cells of foodborne pathogens by steam pasteurization

The objective of this study was to evaluate the effect of steam pasteurization on the inactivation of Escherichia coli O157:H7, Salmonella Typhimurium, and Listeria monocytogenes biofilms on stainless steel and polyvinyl chloride (PVC). Biofilms were formed on a stainless steel and PVC coupon by using a mixture of three strains each of three foodborne pathogens. Six-day-old biofilms on stainless steel and PVC coupons were treated with steam at 75 and 85 °C for 5, 10, 20, 30, 40, and 50 s. Biofilm cells of E. coli O157:H7, S. Typhimurium, and L. monocytogenes on stainless steel were reduced by more than 6 log CFU/coupon after exposure to steam at 75 °C for 30, 40, and 30 s, respectively, and at 85 °C for 30, 20, and 20 s, respectively. Steam treatment resulted in less reduction in the levels of biofilm cells on PVC coupons. Biofilm cells of E. coli O157:H7, S. Typhimurium, and L. monocytogenes were reduced by 1.78, 2.04, and 1.29 log CFU/coupon, respectively, after 50 s of exposure to steam at 75 °C. Exposure to steam at 85° for 50 s reduced biofilm cells of E. coli O157:H7, S. Typhimurium, and L. monocytogenes by 2.53, 3.01, and 1.70 log CFU/coupon, respectively. The results of this study suggest that steam pasteurization has potential as a biofilm control method by the food industry.     

Reduction of Escherichia coli O157:H7 in Biofilms Using Bacteriophage BPECO 19

Biofilm formation is a growing concern in the food industry. Escherichia coli O157:H7 is one of the most important foodborne pathogens that can persists in food and food‐related environments and subsequently produce biofilms. The efficacy of bacteriophage BPECO 19 was evaluated against three E. coli O157:H7 strains in biofilms. Biofilms of the three E. coli O157:H7 strains were grown on abiotic (stainless steel, rubber, and minimum biofilm eradication concentration [MBEC^TM] device) and biotic (lettuce) surfaces at different temperatures. The effectiveness of bacteriophage BPECO 19 in reducing preformed biofilms on these surfaces was further evaluated by treating the surfaces with a phage suspension (10⁸ PFU/mL) for 2 h. The results indicated that the phage treatment significantly reduced (P  < 0.05) the number of adhered cells in all the surfaces. Following phage treatment, the viability of adhered cells was reduced by ≥3 log CFU/cm², 2.4 log CFU/cm², and 3.1 log CFU/peg in biofilms grown on stainless steel, rubber, and the MBEC^TM device, respectively. Likewise, the phage treatment reduced cell viability by ≥2 log CFU/cm² in biofilms grown on lettuce. Overall, these results suggested that bacteriophages such as BPECO 19 could be effective in reducing the viability of biofilm‐adhered cells.     

Inactivation of Escherichia coli O157:H7 on stainless steel upon exposure to Paenibacillus polymyxa biofilms

We investigated the potential use of biofilm formed by a competitive-exclusion (CE) microorganism to inactivate Escherichia coli O157:H7 on a stainless steel surface. Five microorganisms showing inhibitory activities against E. coli O157:H7 were isolated from vegetable seeds and sprouts. The microorganism with the greatest antimicrobial activity was identified as Paenibacillus polymyxa (strain T5). In tryptic soy broth (TSB), strain T5 reached a higher population at 25 °C than at 12 or 37 °C without losing inhibitory activity against E. coli O157:H7. When P. polymyxa (6 log CFU/mL) was co-cultured with E. coli O157:H7 (2, 3, 4, or 5 log CFU/mL) in TSB at 25 °C, the number of E. coli O157:H7 decreased significantly within 24 h. P. polymyxa formed a biofilm on stainless steel coupons (SSCs) in TSB at 25 °C within 24 h, and cells in biofilms, compared to attached cells without biofilm formation, showed significantly increased resistance to a dry environment (43% relative humidity [RH]). With the exception of an inoculum of 4 log CFU/coupon at 100% RH, upon exposure to biofilm formed by P. polymyxa on SSCs, populations of E. coli O157:H7 (2, 4, or 6 log CFU/coupon) were significantly reduced within 48 h. Most notably, when E. coli O157:H7 at 2 log CFU/coupon was applied to SSCs on which P. polymyxa biofilm had formed, it was inactivated within 1 h, regardless of RH. These results will be useful when developing strategies using biofilms produced by competitive exclusion microorganisms to inactivate foodborne pathogens in food processing environments.     

Resistance of pathogenic bacteria on the surface of stainless steel depending on attachment form and efficacy of chemical sanitizers

Various bacteria including food spoilage bacteria and pathogens can form biofilms on different food processing surfaces, leading to potential food contamination or spoilage. Therefore, the survival of foodborne pathogens (Escherichia coli O157:H7, Listeria monocytogenes, Salmonella typhimurium, Staphylococcus aureus, Cronobacter sakazakii) in different forms (adhered cells, biofilm producing in TSB, biofilm producing at RH 100%) on the surface of stainless steel and stored at various relative humidities (RH 23%, 43%, 68%, 85%, and 100%) at room temperature for 5 days was investigated in this study. Additionally, the efficacy of chemical sanitizers (chlorine-based and alcohol-based commercial sanitizers) on inhibiting various types of biofilms of E. coli O157:H7 and S. aureus on the surface of stainless steel was investigated. The number of pathogens on the surface of stainless steel in TSB stored at 25 °C for 7 days or RH 100% at 25 °C for 7 days was significantly increased and resulted in the increase of 3 log₁₀ CFU/coupon after 1 day, and these levels were maintained for 7 days. When stainless steel coupons were stored at 25 °C for 5 days, the number of pathogens on the surface of stainless steel was significantly reduced after storage at RH 23%, 43%, 68%, and 85%, but not at 100%. When the bacteria formed biofilms on the surface of stainless steel in TSB after 6 days, the results were similar to those of the attached form. However, levels of S. aureus and C. sakazakii biofilms were more slowly reduced after storage at RH 23%, 43%, 68%, and 85% for 5 days than were those of the other pathogens. Formation of biofilms stored at RH 100% for 5 days displayed the highest levels of resistance to inactivation. Treatment with the alcohol sanitizer was very effective at inactivating attached pathogens or biofilms on the surface of stainless steel. Reduction levels of alcohol sanitizer treatment ranged from 1.91 to 4.77 log and from 4.35 to 5.35 log CFU/coupon in E. coli O157:H7 and S. aureus, respectively. From these results, the survival of pathogens contaminating the surfaces of food processing substrates such as stainless steel varied depending on RH and attachment form. Also, alcohol-based sanitizers can be used as a potential method to remove microbial contamination on the surfaces of utensils, cooking equipment, and other related substrates regardless of the microbial attached form.     

Influence of organic acid concentration on survival of Listeria monocytogenes and Escherichia coli 0157:H7 in beef carcass wash water and on model equipment surfaces

Acid-adapted cultures of Escherichia coli O157:H7 and Listeria monocytogenes were inoculated in meat decontamination spray-washing runoff fluids in order to evaluate their survival and potential to form biofilms on stainless steel coupons. The cultures (10⁷ cfu ml⁻¹) and stainless steel coupons were exposed to mixtures of water and organic acid washings (composites of each of 2% acetic acid or lactic acid washings with water washings from meat decontamination in proportions of 1/9, 1/49, 1/99 [vol/vol]) or to water washings for up to 14 days at 15°C. E. coli O157:H7 formed biofilms and remained detectable (1.3 log cfu cm⁻²) on stainless steel for up to 4 d in the 1/9 dilution (pH 3.17–3.77) of the organic acid washings, and persisted throughout storage (14 d) in the 1/49 (pH 3.96–4.33) and 1/99 (pH 4.34–6.86) dilution of the organic acid washings. L. monocytogenes populations were unable to form detectable (<1.3 log cfu cm⁻²) biofilms in the 1/9 and 1/49 dilutions of both organic acid washings for up to 14 d; however, by day-14 in the 1/99 dilution of the washings, the pathogen was able to attach at detectable levels (2.7 to 3.4 logs). The pH effects of lower concentrations (1/49 or 1/99) of acidic washings decreased over time due to the formation of amine compounds produced by the natural meat flora, allowing resuscitation of the acid-stressed pathogen survivors. The resuscitation of acid-stressed pathogens may potentially enhance their survival and prevalence in biofilms and thus more attention should be focused on avoiding or minimizing the collection of decontamination runoff fluids on food contact equipment surfaces.     

Evaluation of a novel antimicrobial (lauric arginate ester) substance against biofilm of Escherichia coli O157:H7, Listeria monocytogenes,and Salmonella spp.

The purpose of this study was to evaluate the activity of a novel antimicrobial substance lauric arginate ester (LAE) against selected foodborne pathogens (Escherichia coli O157:H7, Listeria monocytogenes and Salmonella spp.) in biofilm. Minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) were determined and showed that LAE exhibits a strong antimicrobial activity. Biofilms were grown on abiotic stainless steel, rubber, MBEC biofilm device) and biotic (lettuce) surfaces. The efficacy of LAE (50, 100 and 200 ppm) at reducing the biofilm cells on these surfaces was examined by applying LAE for 2 h. Results revealed that LAE exhibited the reduction in biofilm bacteria up to 7 log CFU cm^?2, 3.5 log CFU cm^?2, 4.0 log CFU peg^?1 and 1.5 log CFU cm^?2 on stainless steel, rubber, MBEC and lettuce surfaces, respectively. Overall, these results suggest that LAE has been shown to be a potential alternative to control bacteria in biofilm mode in food industry.     

Production of biofilm and quorum sensing by Escherichia coli O157:H7 and its transfer from contact surfaces to meat,poultry, ready-to-eat deli,and produce products

Multistate outbreaks of Escherichia coli O157:H7 infections through consumption of contaminated foods including produce products have brought a great safety concern. The objectives of this study were to determine the effect of biofilm and quorum sensing production on the attachment of E. coli O157:H7 on food contact surfaces and to evaluate the transfer of the pathogen from the food contact to various food products. E. coli O157:H7 produced maximum levels of AI-2 signals in 12 h of incubation in tested meat, poultry, and produce broths and subsequently formed strong biofilm in 24 h of incubation. In general, E. coli O157:H7 formed stronger biofilm on stainless steel than glass. Furthermore, E. coli O157:H7 that had attached on the surface of stainless steel was able to transfer to meat, poultry, ready-to-eat deli, and produce products. Strong attachment of the transferred pathogen on produce products (cantaloupe, lettuce, carrot, and spinach) was detected (>10³ CFU/cm²) even after washing these products with water. Our findings suggest that biofilm formation by E. coli O157:H7 on food contact surfaces can be a concern for efficient control of the pathogen particularly in produce products that require no heating or cooking prior to consumption.     

Escherichia coli O157:H7 survival,biofilm formation and acid tolerance under simulated slaughter plant moist and dry conditions

Microorganisms persisting in slaughter plant environments may develop acid resistance and be translocated to other environmental surfaces or products. The objective of this study was to evaluate the potential of Escherichia coli O157:H7 to form biofilms and maintain acid resistance, under different culture habituation scenarios, on stainless steel coupons (2 × 5 × 0.08 cm), in the presence of beef carcass decontamination runoff fluids (washings). Coupons were stored in test tubes with unsterilized water washings (WW; pH 6.94) or lactic acid washings (LAW; pH 4.98), which were inoculated with E. coli O157:H7 (10³–10⁴ CFU/ml) and incubated at 15 (24 or 48 h) or 35 °C (7 or 24 h), simulating different habituation scenarios on sites of a slaughter plant, including sanitation and overnight drying, during consecutive operational shifts. Acid resistance (AR) of planktonic and detached E. coli O157:H7 cells was assessed in tryptic soy broth adjusted to pH 3.5 with lactic acid. The highest pre-drying attachment and AR of E. coli O157:H7 were observed after 24 h at 35 °C and 48 h at 15 °C. Drying reduced (P < 0.05) recovery of attached E. coli O157:H7 cells; however, exposure of dried coupons to uninoculated washings allowed recovery of attached E. coli O157:H7, which restored AR, especially under conditions that favored post-drying growth. Exposure of attached cells to 50 ppm PAA for 45 s before drying, as well as habituation in LAW, reduced the recovery and AR of E. coli O157:H7. Therefore, incomplete removal of biofilms may result in cells of increased AR, especially in sites within a slaughter plant, in which liquid meat wastes may remain for long periods of time.     

Autoinducer-2 activity of gram-negative foodborne pathogenic bacteria and its influence on biofilm formation

ABSTRACT:  This study evaluated whether autoinducer-2 (AI-2) activity would be associated with biofilm formation by Salmonella and Escherichia coli O157:H7 strains on food contact surfaces. In study I, a Salmonella Typhimurium DT104 strain and an E . coli O157:H7 strain, both AI-2 positive, were individually inoculated into 50 mL of Luria–Bertani (LB) or LB + 0.5% glucose (LBG) broth, without or with stainless steel or polypropylene ( Salmonella ) coupons. At 0, 14 ( Salmonella ), 24, 48, and 72 h of storage (25 °C), cells in suspension and detached cells from the coupons, obtained by vortexing, were enumerated on tryptic soy agar. In study II, a Salmonella Thompson AI-2-positive strain and an AI-2-negative strain, and an E . coli O157:H7 AI-2-positive strain and an AI-2-negative strain were inoculated into LB broth with stainless steel coupons. Cells were enumerated as in study I. In both studies, AI-2 activity was determined in cell-free supernatants. Cell numbers of S . Typhimurium DT104 on biofilms were higher ( P < 0.05) in LB than those in LBG, while the E . coli O157:H7 strain showed no difference ( P ≥ 0.05) in biofilm cell counts between LB and LBG after storage for 72 h. Both S . Typhimurium DT104 and E . coli O157:H7 strains produced higher ( P < 0.05) AI-2 activity in LBG than LB cell suspensions. Cell counts of AI-2-positive and-negative S . Thompson and E . coli O157:H7 strains were not different ( P ≥ 0.05) within suspensions or coupons (study II). The results indicated that, under the conditions of this study, AI-2 activity of the pathogen strains tested may not have a major influence on biofilm formation on food contact surfaces, which was similar between AI-2-positive and -negative strains.     

Inhibition of biofilm formation,adhesion and invasion in Caco-2 cells by foodborne pathogens using phyto-mediated synthesised silver nanoparticles from industrial wastes

Certain foodborne diseases are associated with antibiotic resistance, a significant problem throughout the world. Silver nanoparticles (AgNPs) using industrial waste from Eucalyptus camaldulensis and sericin, a protein derived from Bombyx mori, were synthesised by a one-step approach. Spherical-shaped nanoparticles with the average size of 17.19 nm exhibited strong antioxidant activity. The minimum bactericidal concentrations against foodborne pathogens including Bacillus cereus, Listeria monocytogenes, Staphylococcus aureus, Escherichia coli O157:H7, Klebsiella pneumoniae, Salmonella Typhimurium, Shigella sonnei, Vibrio cholerae and Vibrio parahaemolyticus were between 2.96 and 11.83 µg/mL. Killing against L. monocytogenes and E. coli O157:H7 was observed within 4 h. Treatment with AgNPs at 0.25 – 0.5 × MIC significantly reduced biofilm production in all isolates (P < 0.05). AgNPs significantly impeded adhesion to and invasion of human epithelial Caco-2 cells by L. monocytogenes and E. coli O157:H7 (P < 0.05). Biocompatibility assessment of AgNPs with Caco-2 and human red blood cells demonstrated no toxic effects.     

Biofilm Formation of O157 and Non‐O157 Shiga Toxin‐Producing Escherichia coli and Multidrug‐Resistant and Susceptible Salmonella Typhimurium and Newport and Their Inactivation by Sanitizers

This study compared biofilm formation by 7 serogroups of pathogenic Escherichia coli and 2 or 3 phenotypes of Salmonella (susceptible, multidrug‐resistant [MDR], and/or multidrug resistant with ampC gene [MDR‐AmpC]). One‐week mature biofilms were also exposed to water, quaternary ammonium compound‐based (QAC), and acid‐based (AB) sanitizers. Seven groups (strain mixture) of above‐mentioned pathogens were separately spot‐inoculated onto stainless steel coupons surfaces for target inoculation of 2 log CFU/cm², then stored statically, partially submerged in 10% nonsterilized meat homogenate at 4, 15, and 25 °C. Biofilm cells were enumerated on days 0, 1, 4, and 7 following submersion in 30 mL for 1 min in water, QAC, and AB. Counts on inoculation day ranged from 1.6 ± 0.4 to 2.4 ± 0.6 log CFU/cm² and changed to 1.2 ± 0.8 to 1.9 ± 0.8 on day 7 at 4 °C with no appreciable difference among the 7 pathogen groups. After treatment with QAC and AB on day 7, counts were reduced (P < 0.05) to less than 0.7 ± 0.6 and 1.2 ± 0.5, respectively, with similar trends among pathogens. Biofilm formation at higher temperatures was more enhanced; E. coli O157:H7, as an example, increased (P < 0.05) from 1.4 ± 0.6 and 2.0 ± 0.3 on day 0 to 4.8 ± 0.6 and 6.5 ± 0.2 on day 7 at 15 and 25 °C, respectively. As compared to 4 °C, after sanitation, more survivors were observed for 15 and 25 °C treatments with no appreciable differences among pathogens. Overall, we observed similar patterns of growth and susceptibility to QAC and AB sanitizers of the 7 tested pathogen groups with enhanced biofilm formation capability and higher numbers of treatment survivors at higher temperatures.     

Simultaneous Detection of Escherichia coli O157:H7 and Salmonella Typhimurium: The Use of Magnetic Beads Conjugated with Multiple Capture Antibodies

Streptavidin-coated magnetic beads were conjugated with biotinylated capture antibodies to both Escherichia coli O157:H7 and Salmonella Typhimurium to form multi-pathogen capture immunomagnetic beads (IMB-M). The efficacy of these beads was investigated in both pure and mixed culture suspensions, as well as in inoculated spinach and ground beef. Using dual-label time-resolved fluorescence, a sandwich immunoassay consisting of europium- and samarium-labeled detection antibodies was used to measure the capture of E. coli and Salmonella, respectively. IMB-M was just as effective as the mixture of IMB against E. coli and Salmonella in capturing both organisms in pure culture and E. coli in mixed culture. Capture of Salmonella in mixed culture by IMB-M resulted in lower fluorescent signals, but comparable detection limit. In inoculated food samples, IMB-M was just as effective as the mixture of IMB specific for both target organisms in detecting 1 cfu/g of E. coli and 100 cfu/g of Salmonella after a 6-h enrichment at 37 °C. Multi-pathogen capture IMB have the potential to be convenient and important tools for multi-pathogen detection.     

Effects of Zataria multiflora boiss essential oil,ultraviolet radiation and their combination on Listeria monocytogenes biofilm in a simulated industrial model

The objective of this study was to investigate the inhibitory effect of Zataria multiflora boiss essential oils (ZEOs), ultraviolet (UV) radiation and their combination against Listeria monocytogenes biofilm in a simulated industrial model (SIM). The effect of minimal inhibitory concentration (MIC) and sub‐MIC concentration of ZEOs, different contact time of UV and their combination was evaluated in a SIM on 6‐ and 12‐day‐old L. monocytogenes biofilm. In a SIM, 0.3% ZEOs were adequate to completely eliminate 6‐ and 12‐day‐old biofilm grown on stainless steel coupons. The population of viable L. monocytogenes biofilm cells under a 15‐ to 45‐min contact time of UV treatment declined significantly at 6‐ and 12‐day‐old biofilm. The combined effect of ZEO and UV showed antagonist effects. These findings indicated that in the single use, ZEO and UV revealed a suitable antilisteria biofilm activity, while combining them is not a promising method to remove listeria biofilms from stainless steel surfaces.     

A new 7-plex PCR assay for simultaneous detection of shiga toxin-producing Escherichia coli O157 and Salmonella Enteritidis in meat products

A 7-plex PCR assay was developed to achieve an effective detection and identification of serotype Enteritidis of Salmonella spp. and shiga toxin-producing type of Escherichia coli O157 in meat products. Six DNA sequences in the invA and sdfI genes of Salmonella Enteritidis as well as rfbE, eae, stx1, and stx2 genes of E. coli O157:H7 were employed to design primers. The multiplex PCR assay could specifically and sensitively detect and identify target pathogens. Applying the assay to meat samples, the multiplex PCR assay was able to simultaneously detect and identify the two pathogens at a sensitivity of three CFU/10 g raw meats after simple 16 h enrichment in buffered peptone water. Further applying in 21 retail meat samples revealed that two samples were positive for non-shiga toxin producing E. coli O157, one sample was positive for Stx2 producing E. coli O157 and five samples were positive for Salmonella enterica Enteritidis. Taken together, the 7-plex PCR assay is a rapid and reliable method for effectively screening single or multiple pathogens occurrences in various meat products, and could also identify the Salmonella enterica Enteritidis from all Salmonella spp. and shiga toxin producing type from all E. coli strains. Considering as a non expensive screening tool, the multiplex PCR assay has a great potential in complement for food stuff analysis by conventional microbiological tests.     

Fate of biofilm cells of Cronobacter sakazakii under modified atmosphere conditions

Survival of biofilm cells of Cronobacter sakazakii formed on stainless steel and polyvinyl chloride (PVC) on exposure to different atmosphere conditions was studied. Biofilms were formed on stainless steel and PVC coupons by using three strains of C. sakazakii. Six day old biofilms on stainless steel and PVC coupons were stored under N₂ gas, CO₂ gas, and air for up to 20 days. N₂ and CO₂ gases resulted in significant (p < 0.05) further reductions of 1.79 and 2.47 log CFU/cm² after 20 days of storage, respectively, compared to air storage. N₂ and CO₂ gases led to less reduction of biofilm cells on PVC compared to those on stainless steel. N₂ and CO₂ gases resulted in significant (p < 0.05) further reductions of 0.98 and 1.20 log CFU/cm² after 20 days of storage, respectively, compared to air storage.     

Inhibitory effects of UV treatment and a combination of UV and dry heat against pathogens on stainless steel and polypropylene surfaces

Abstract: Pathogens that contaminate the surfaces of food utensils may contribute to the occurrence of foodborne disease outbreaks. We investigated the efficacy of UV treatment combined with dry heat (50 °C) for inhibiting 5 foodborne pathogens (Escherichia coli O157:H7, Salmonella Typhimurium, Pseudomonas aeruginosa, Listeria monocytogenes, and Staphylococcus aureus) on stainless steel and polypropylene surfaces in this study. We inoculated substrates with each of the 5 foodborne pathogens cultured on agar surface and then UV treatment alone or a combination of both UV and dry heat (50 °C) was applied for 30 min, 1 h, 2 h, and 3 h. The initial populations of the 5 pathogens before treatment were 8.02 to 9.18 and 8.73 to 9.16 log₁₀ CFU/coupon on the surfaces of stainless steel and polypropylene coupons, respectively. UV treatments for 3 h significantly inhibited S. Typhimurium, L. monocytogenes, and S. aureus on the stainless steel by 3.06, 2.18, and 2.70 log₁₀ CFU/coupon, and S. aureus on the polypropylene by 3.11 log₁₀ CFU/coupon, respectively. The inhibitory effects of the combined UV and dry heat treatment (50 °C) increased as treatment time increased, yielding significant reductions in all samples treated for 3 h, with the exception of S. aureus on polypropylene. The reduction level of E. coli O157:H7 treated for 3 h on the surface of stainless steel and polypropylene treated was approximately 6.00 log₁₀ CFU/coupon. These results indicate that combined UV and dry heat (50 °C) treatments may be effective for controlling microbial contamination on utensils and cooking equipment surfaces as well as in other related environments.     

Efficacy of Neutral pH Electrolyzed Water in Reducing Escherichia coli O157:H7 and Salmonella Typhimurium DT 104 on Fresh Produce Items using an Automated Washer at Simulated Food Service Conditions

The objective of this study was to determine the efficacy of neutral pH electrolyzed (NEO) water (155 mg/L free chlorine, pH 7.5) in reducing Escherichia coli O157:H7 and Salmonella Typhimurium DT 104 on romaine lettuce, iceberg lettuce, and tomatoes washed in an automated produce washer for different times and washing speeds. Tomatoes and lettuce leaves were spot inoculated with 100 μL of a 5 strain cocktail mixture of either pathogen and washed with 10 or 8 L of NEO water, respectively. Washing lettuce for 30 min at 65 rpm led to the greatest reductions, with 4.2 and 5.9 log CFU/g reductions achieved for E. coli O157:H7 and S. Typhimurium respectively on romaine, whereas iceberg lettuce reductions were 3.2 and 4.6 log CFU/g for E. coli O157:H7 and S. Typhimurium respectively. Washing tomatoes for 10 min at 65 rpm achieved reductions greater than 8 and 6 log CFU/tomato on S. Typhimurium and E. coli O157:H7 respectively. All pathogens were completely inactivated in NEO water wash solutions. No detrimental effects on the visual quality of the produce studied were observed under all treatment conditions. Results show the adoption of this washing procedure in food service operations could be useful in ensuring produce safety.     

Synergistic effect of steam and lactic acid against Escherichia coli O157:H7, Salmonella Typhimurium, and Listeria monocytogenes biofilms on polyvinyl chloride and stainless steel

This study was designed to investigate the individual and combined effects of steam and lactic acid (LA) on the inactivation of biofilms formed by Escherichia coli O157:H7, Salmonella Typhimurium, and Listeria monocytogenes on polyvinyl chloride (PVC) and stainless steel. Six day old biofilms were developed on PVC and stainless steel coupons by using a mixture of three strains each of three foodborne pathogens at 25°C. After biofilm development, PVC and stainless steel coupons were treated with LA alone (immersed in 0.5% or 2% for 5s, 15s, and 30s), steam alone (on both sides for 5, 10, and 20s), and the combination of steam and LA. The numbers of biofilm cells of the three foodborne pathogens were significantly (p<0.05) reduced as the amount of LA and duration of steam exposure increased. There was a synergistic effect of steam and LA on the viability of biofilm cells of the three pathogens. For all biofilm cells of the three foodborne pathogens, reduction levels of individual treatments ranged from 0.11 to 2.12 log CFU/coupon. The combination treatment of steam and LA achieved an additional 0.2 to 2.11 log reduction compared to the sum of individual treatments. After a combined treatment of immersion in 2% LA for 15s or 30s followed by exposure to steam for 20s, biofilm cells of the three pathogens were reduced to below the detection limit (1.48 log). From the results of this study, bacterial populations of biofilms on PVC coupons did not receive the same thermal effect as on stainless steel coupons. Effectiveness of steam and LA may be attributed to the difference between Gram-negative and Gram-positive characteristics of the bacteria studied. The results of this study suggest that the combination of steam and LA has potential as a biofilm control intervention for food processing facilities.     

Lactic acid resistance of Shiga toxin-producing Escherichia coli and multidrug-resistant and susceptible Salmonella Typhimurium and Salmonella Newport in meat homogenate

This study compared lactic acid resistance of individual strains of wild-type and rifampicin-resistant non-O157 Shiga toxin-producing Escherichia coli (STEC) and of susceptible and multidrug-resistant (MDR) and/or MDR with acquired ampC gene (MDR-AmpC) Salmonella against E. coli O157:H7. After inoculation of sterile 10% beef homogenate, lactic acid was added to a target concentration of 5%. Before acid addition (control), after acid addition (within 2 s, i.e. time-0), and 2, 4, 6 and 8 min after addition of acid, aliquots were removed, neutralized, and analyzed for survivors. Of wild-type and of rifampicin-resistant non-O157 STEC strains, irrespective of serogroup, 85.7% (30 out of 35 strains) and 82.9% (29 out of 35 strains), respectively, reached the detection limit within 0–6 min. Of Salmonella strains, 87.9% (29 out of 33 isolates) reached the detection limit within 0–4 min, irrespective of antibiotic resistance phenotype. Analysis of non-log-linear microbial survivor curves indicated that non-O157 STEC serogroups and MDR and susceptible Salmonella strains required less time for 4D-reduction compared to E. coli O157:H7. Overall, for nearly all strains and time intervals, individual strains of wild-type and rifampicin-resistant non-O157 STEC and Salmonella were less (P < 0.05) acid tolerant than E. coli O157:H7.