A review of energy storage technologies for wind power applications

Due to the stochastic nature of wind, electric power generated by wind turbines is highly erratic and may affect both the power quality and the planning of power systems. Energy Storage Systems (ESSs) may play an important role in wind power applications by controlling wind power plant output and providing ancillary services to the power system and therefore, enabling an increased penetration of wind power in the system. This article deals with the review of several energy storage technologies for wind power applications. The main objectives of the article are the introduction of the operating principles, as well as the presentation of the main characteristics of energy storage technologies suitable for stationary applications, and the definition and discussion of potential ESS applications in wind power, according to an extensive literature review.     

The assessment of actual wind power availability in ireland

Data on actual wind energy availability in Ireland are sparse. This is because (a) relatively little data on wind speeds have been collected in Ireland at sites of interest for wind exploitation, and (b) such data need in any case to be integrated with the characteristics of actual windmills which respond more efficiently to certain wind speed than to others. This paper describes a methodology for performing such an integration, and offers tables of specific output for windmills of different characteristics located at different sites in Ireland. the variations in this specific output are discussed.     

Adequacy evaluation of wind power generation systems

This paper attempts to assess the adequacy of wind power generation systems using the data collected from seven wind farms in Muppandal, Tamilnadu (India) with a total capacity of 37 MW. A Monte Carlo model simulation is incorporated in the algorithm to obtain the hourly power output of wind farms, which also takes into account the unavailability of wind turbines. A typical load demand profile is used to examine the chronological hourly wind power generation for each month. The reliability index of LOLE (loss of load expectation) is used to estimate the reliable contribution of wind farm power generation.     

Investigation on wind power potential on Hong Kong islands—an analysis of wind power and wind turbine characteristics

This paper discusses the potential for electricity generation on Hong Kong islands through an analysis of the local weather data and typical wind turbine characteristics. An optimum wind speed, u_op, is proposed to choose an optimal type of wind turbine for different weather conditions. A simulation model has been established to describe the characteristics of a particular wind turbine. A case study investigation allows wind speed and wind power density to be obtained using different hub heights, and the annual power generated by the wind turbine to be simulated. The wind turbine's capacity factor, being the ratio of actual annual power generation to the rated annual power generation, is shown to be 0.353, with the capacity factor in October as high as 0.50. The simulation shows the potential for wind power generation on the islands surrounding Hong Kong.     

The large-scale integration of wind generation: Impacts on price,reliability and dispatchable conventional suppliers

This work examines the effects of large-scale integration of wind powered electricity generation in a deregulated energy-only market on loads (in terms of electricity prices and supply reliability) and dispatchable conventional power suppliers. Hourly models of wind generation time series, load and resultant residual demand are created. From these a non-chronological residual demand duration curve is developed that is combined with a probabilistic model of dispatchable conventional generator availability, a model of an energy-only market with a price cap, and a model of generator costs and dispatch behavior. A number of simulations are performed to evaluate the effect on electricity prices, overall reliability of supply, the ability of a dominant supplier acting strategically to profitably withhold supplies, and the fixed cost recovery of dispatchable conventional power suppliers at different levels of wind generation penetration. Medium and long term responses of the market and/or regulator in the long term are discussed.     

Identification-based prediction of wind park power generation

This paper approaches the problem of output power prediction for an off-shore wind park. To this end, a so called wind deficiency factor for each turbine and for each wind direction sector is identified using past data. This identification is done by using the effective wind speed concept that can establish a link between output power of each wind turbine and meteorological mast measures in terms of wind speed and direction. Based on forecast wind speed and direction, a wind park simulator that uses the previously-identified deficiency factors, computes future output power time evolutions. Numerical simulations show the feasibility of the proposed approach.     

Landscape externalities from onshore wind power

The expansion of renewable energy is a central element of the German Federal Government's climate and energy policy. The target for 2020 is to produce 30% of the electricity from renewable energies. Wind power has been selected to be a major contributor to this change. Replacing old wind turbines by modern ones and building new turbines on land will be crucial in meeting this target. However, the expansion of onshore wind power is not universally accepted. In several regions of Germany residents are protesting against setting up new wind turbines. To determine the negative effects two choice experiments were applied in Westsachsen and Nordhessen, Germany. In both regions the externalities of wind power generation until 2020 based on today's state of technology were measured. The results show that negative landscape externalities would result from expanding wind power generation. Using latent class models three different groups of respondents experiencing different degrees of externalities were identified.     

A review of power converter topologies for wind generators

Wind energy conversion systems have become a focal point in the research of renewable energy sources. This is in no small part due to the rapid advances in the size of wind generators as well as the development of power electronics and their applicability in wind energy extraction. This paper provides a comprehensive review of past and present converter topologies applicable to permanent magnet generators, induction generators, synchronous generators and doubly fed induction generators. The many different generator–converter combinations are compared on the basis of topology, cost, efficiency, power consumption and control complexity. The features of each generator–converter configuration are considered in the context of wind turbine systems.     

The impact of wind power on electricity prices

This paper investigates the impact of wind power on electricity prices using a production cost model of the Independent System Operator – New England power system. Different scenarios in terms of wind penetration, wind forecasts, and wind curtailment are modeled in order to analyze the impact of wind power on electricity prices for different wind penetration levels and for different levels of wind power visibility and controllability. The analysis concludes that electricity price volatility increases even as electricity prices decrease with increasing wind penetration levels. The impact of wind power on price volatility is larger in the shorter term (5-min compared to hour-to-hour). The results presented show that over-forecasting wind power increases electricity prices while under-forecasting wind power reduces them. The modeling results also show that controlling wind power by allowing curtailment increases electricity prices, and for higher wind penetrations it also reduces their volatility.     

A probabilistic security assessment approach to power systems with integrated wind resources

Renewable energy sources, such as wind and photovoltaic solar, have added additional uncertainty to power systems. These sources, further to the conventional sources of uncertainty due to stochastic nature of both the load and the availability of generation resources and transmission assets, make clear the limitations of the conventional deterministic power flow in power system analysis and security assessment applications. In order to manage uncertainties, probabilistic approaches can provide a valuable contribution.In this paper, we propose a new scheme for probabilistic security assessment. The model can deal with various types of probability distributions modeling power injections and can explicitly represent the effects on system security of correlation among nodal power injections (such as wind power) and of contingencies due to branch and generating unit outages. In addition, the steady-state behavior of the frequency regulation is explicitly included in the model. A new approach to deal with current limits is also proposed.Extensive testing on both the modified IEEE-14 bus test system and the Sicilian power system indicates good performance of the proposed approach in comparison with the result obtained by the computationally more demanding Monte Carlo approach.     

The spectrum of power from wind turbines

The power spectral density of the output of wind turbines provides information on the character of fluctuations in turbine output. Here both 1-second and 1-hour samples are used to estimate the power spectrum of several wind farms. The measured output power is found to follow a Kolmogorov spectrum over more than four orders of magnitude, from 30 s to 2.6 days. This result is in sharp contrast to the only previous study covering long time periods, published 50 years ago. The spectrum defines the character of fill-in power that must be provided to compensate for wind's fluctuations when wind is deployed at large scale. Installing enough linear ramp rate generation (such as a gas generator) to fill in fast fluctuations with amplitudes of 1% of the maximum fluctuation would oversize the fill-in generation capacity by a factor of two for slower fluctuations, greatly increasing capital costs. A wind system that incorporates batteries, fuel cells, supercapacitors, or other fast-ramp-rate energy storage systems would match fluctuations much better, and can provide an economic route for deployment of energy storage systems when renewable portfolio standards require large amounts of intermittent renewable generating sources.     

Economics of compressed air energy storage to integrate wind power: A case study in ERCOT

Compressed air energy storage (CAES) could be paired with a wind farm to provide firm, dispatchable baseload power, or serve as a peaking plant and capture upswings in electricity prices. We present a firm-level engineering-economic analysis of a wind/CAES system with a wind farm in central Texas, load in either Dallas or Houston, and a CAES plant whose location is profit-optimized. With 2008 hourly prices and load in Houston, the economically optimal CAES expander capacity is unrealistically large – 24 GW – and dispatches for only a few hours per week when prices are highest; a price cap and capacity payment likewise results in a large (17 GW) profit-maximizing CAES expander. Under all other scenarios considered the CAES plant is unprofitable. Using 2008 data, a baseload wind/CAES system is less profitable than a natural gas combined cycle (NGCC) plant at carbon prices less than $56/tCO₂ ($15/MMBTU gas) to $230/tCO₂ ($5/MMBTU gas). Entering regulation markets raises profit only slightly. Social benefits of CAES paired with wind include avoided construction of new generation capacity, improved air quality during peak times, and increased economic surplus, but may not outweigh the private cost of the CAES system nor justify a subsidy.     

Redefinition power curve for more accurate performance assessment of wind farms

The lack of accurate methods for assessment of the productive capacity of wind power plants is becoming a bottleneck in an increasingly commercialized wind power industry. In this article the inherent components of performance assessment are identified and analysed and ways of minimizing uncertainties on the components are investigated. The main components are identified as ‘site calibration’, ‘wind turbine sensitivity to flow variables’, ‘plant blockage effects’ and ‘uncertainty analysis’. Site calibration is the action of estimating the flow variables at the wind turbine position from measurements of these quantities at another (reference) position. The purpose of sensitivity analysis is to clarify which and how flow variables influence power output. Plant blockage effects refer to the power plant's influence on the reference measurements of flow variables. Finally, the component uncertainties and in turn the integrated uncertainty on the average productive capacity of the wind power plant are investigated. It is found that uncertainties can be reduced (1) by including several more flow variables in addition to hub‐height wind speed, (2) by carrying out site calibration with utmost care and by inclusion of more variables, (3) by taking plant blockage into consideration, (4) by aiming at ‘plant‐average’ power instead of looking only at individual machines and, possibly, (5) by introduction of remote‐sensing anemometer techniques. Copyright © 2000 John Wiley & Sons, Ltd.     

Performance assessment of Portuguese wind farms: Ownership and managerial efficiency

This paper analyzes ownership and unobserved managerial ability as factors affecting the performance of a representative sample of Portuguese wind farms by means of frontier models. These farms are ranked according to their technical efficiency during the period 2004–2008 and homogenous and heterogeneous variables are disentangled in the cost function, which leads us to advise the implementation of common policies as well as policies by segments. Economic implications arising from the study are also considered.     

Design requirements for medium-sized wind turbines for remote and hybrid power systems

This paper provides an overview of the design requirements for medium-sized wind turbines intended for use in a remote hybrid power system. The recommendations are based on first-hand experience acquired at the University of Massachusetts through the installation, operation, and upgrade of a 250-kW turbine on a mountain top with difficult access in Western Massachusetts. Experience with the operation of this turbine and the design of its control system, together with a long history in the design and analysis of hybrid power systems, has made it possible to extend the work in Western Massachusetts to remote or hybrid power systems in general. The University test site has many attributes of more remote sites and the overall wind turbine installation is typical of one that could power a hybrid wind system. For example, access to the site is limited due to steep terrain, snow, and environmental restrictions. Also, the power lines feeding the turbine exhibit voltage sags and phase imbalance, especially during start-up. This paper is based on the experience gained from the operation of this wind turbine and assesses the requirements for the design and operation of medium to large wind turbines in remote locations. The work summarizes lessons learned relative to: (1) sensors, communication, and control capabilities; (2) grid connection issues; and (3) weather-related problems. The final section of the paper focuses on design requirements to ensure successful installation and the completion of maintenance and repairs at remote sites.     

Understanding the variability of wind power costs

Wind power has a significant contribution to make in efforts to abate CO₂ emissions from global energy systems. Currently, wind power generation costs are approaching parity with costs attributed to conventional, carbon-based sources of energy but the economic advantage still rests decidedly with conventional sources. Therefore, there is an imperative to ensure that wind power projects are developed in the most economically optimal fashion. For wind power project developers, shaving a few tenths of a cent off of the kilowatts per hour cost of wind power can mean the difference between a commercially viable project and a non-starter. For civic authorities who are responsible for managing municipally supported wind power projects, optimizing the economics of such projects can attenuate stakeholder opposition. This paper attempts to contribute to a better understanding of how to economically optimise wind power projects by conflating research from the fields of energy economics, wind power engineering, aerodynamics, geography and climate science to identify critical factors that influence the economic optimization of wind power projects.     

Well-functioning balancing markets: A prerequisite for wind power integration

This article focuses on the design of balancing markets in Europe taking into account an increasing wind power penetration. In several European countries, wind generation is so far not burdened with full balancing responsibility. However, the more wind power penetration, the less bearable for the system not to allocate balancing costs to the responsible parties. Given the variability and limited predictability of wind generation, full balancing exposure is however only feasible conditionally to well-functioning balancing markets. On that account, recommendations ensuring an optimal balancing market design are formulated and their impact on wind generation is assessed. Taking market-based or cost-reflective imbalance prices as the main objective, it is advised that: (1) the imbalance settlement should not contain penalties or power exchange prices, (2) capacity payments should be allocated to imbalanced BRPs via an additive component in the imbalance price and (3) a cap should be imposed on the amount of reserves. Efficient implementation of the proposed market design may require balancing markets being integrated across borders.     

An assessment of governmental wind power programmes in Sweden—using a systems approach

The purpose of this paper is to assess the effects, the cost efficiency, and the goal achievement of policy instruments aimed for the development and deployment of wind power in Sweden during the period 1975 to 2000. The paper presents an empirical example of a socio-technical system-based approach for impact assessment, in which changes in the wind power system are described and analysed with respect to technology development, cost development and actors’ involvement. The results show that the policy instruments were not designed to have a broad, system-oriented perspective but targeted and included restricted technology concepts—i.e. large, two-bladed turbines—and limited involvement of actors. The assessment shows that early inflexible steering of technology and market development, together with a lack of comprehensive, long-term strategy, lack of continuity in policy interventions and weak combinations of policy programmes and measures have contributed to a very limited wind power development in Sweden. A rough cost efficiency analysis reveals that Sweden has much less wind power installed in relation to expenditures on various support than Germany and Spain. The Swedish policy instruments did, however, achieve the Government's goals to increase wind energy production.     

基于可靠性指标LOLP的风电场容量可信度的研究

介绍了基于可靠性指标LOLP的风电场容量可信度计算方法,同时给出了用于风电场可靠性计算的两种模型———发电机模型和负的负荷模型。利用不同的模型,结合实际算例,得出了一系列的计算结果,并对可能影响风电场容量可信度的一些相关因素作了灵敏度分析。