Characterizations of strontium(II) and barium(II) adsorption from aqueous solutions using dolomite powder

In this research, adsorption technique was applied for strontium and barium removal from aqueous solution using dolomite powder. The process has been investigated as a function of pH, contact time, temperature and adsorbate concentration. The experimental data was analyzed using equilibrium isotherm, kinetic and thermodynamic models. The isotherm data was well described by Langmuir isotherm model. The maximum adsorption capacity was found to be 1.172 and 3.958 mg/g for Sr(II) and Ba(II) from the Langmuir isotherm model at 293 K, respectively. The kinetic data was tested using first and pseudo-second order models. The results indicated that adsorption fitted well with the pseudo-second order kinetic model. The thermodynamic parameters (ΔG°, ΔH°, and ΔS°) were also determined using the equilibrium constant value obtained at different temperatures. The results showed that the adsorption for both ions was feasible and exothermic.     

Removal of Pb(II) ions from aqueous solutions by sulphuric acid-treated wheat bran

Sulphuric acid-treated wheat bran (STWB) was used as an adsorbent to remove Pb(II) ions from aqueous solution. It was observed that the adsorption yield of Pb(II) ions was found to be pH dependent. The equilibrium time for the process was determined as 2h. STWB gave the highest adsorption yield at around pH 6.0. At this pH, adsorption percentage for an initial Pb(II) ions concentration of 100mg/L was found to be 82.8 at 25 degrees C for contact time of 2h. The equilibrium data obtained at different temperatures fitted to the non-linear form of Langmuir, Freundlich and Redlich-Peterson and linear form of Langmuir and Freundlich models. Isotherm constants were calculated and compared for the models used. The maximum adsorption capacity (q(max)) which was obtained linear form of Langmuir model increased from 55.56 to 79.37mg/g with increasing temperature from 25 to 60 degrees C. Similar trend was observed for other isotherm constants related to the adsorption capacity. Linear form of Langmuir isotherm data was evaluated to determine the thermodynamic parameters for the process. Thermodynamic parameters show that adsorption process of Pb(II) ions is an endothermic and more effective process at high temperatures. The pseudo nth order kinetic model was successfully applied to the kinetic data and the order (n) of adsorption reaction was calculated at the range from 1.711 to 1.929. The values of k(ad) were found to be 5.82x10(-4) and 21.81x10(-4)(min(-1))(mg/g)(1-n) at 25 and 60 degrees C, respectively. Activation energy was determined as 29.65kJ/mol for the process. This suggest that the adsorption Pb(II) ions by STWB is chemically controlled.     

Immobilization of 2,2'-dipyridyl onto bentonite and its adsorption behavior of copper(II) ions

In this study, the immobilization of 2,2'-dipyridyl onto bentonite was firstly carried out and it was then used for the adsorption of copper(II) ions from aqueous solutions. The variation of the parameters of pH, contact time, initial copper(II) concentration and temperature were investigated in the adsorption experiments. The XRD, FTIR, elemental and thermal analyses were performed to observe the immobilization of 2,2'-dipyridyl onto natural bentonite. The adsorption data obtained were well described by the Langmuir adsorption isotherm model at all studied temperatures. The results indicated that the maximum adsorption capacity was 54.07 mg g(-1) from the Langmuir isotherm model at 50 degrees C. The thermodynamic parameters indicated that the adsorption process is spontaneous, endothermic and chemical in nature. The kinetic parameters of the adsorption were calculated from the experimental data. According to these parameters, the best-fit was obtained by the pseudo-second-order kinetic model. The results showed that 2,2'-dipyridyl-immobilized bentonite can be used as the effective adsorbent for the removal of heavy metal contaminants.     

Adsorption of platinum (IV), palladium (II) and gold (III) from aqueous solutions onto L-lysine modified crosslinked chitosan resin

Crosslinked chitosan resin chemically modified with L-lysine has been used to investigate the adsorption of Pt(IV), Pd(II) and Au(III) from aqueous solutions. Batch adsorption studies were carried out with various parameters, such as initial metal ion concentration, contact time, pH and temperature. The maximum adsorption capacity was found at pH 1.0 for Pt(IV), at pH 2.0 for Au(III) and Pd(II). Langmuir and Freundlich isotherm models were applied to analyze the experimental data. The best interpretation for the experimental data was given by the Langmuir isotherm and the maximum adsorption capacity was found to be 129.26 mg/g for Pt(IV), 109.47 mg/g for Pd(II) and 70.34 mg/g for Au(III). The kinetic data was tested using pseudo-first-order and pseudo-second-order kinetic models. Kinetic data correlated well with the pseudo-second-order kinetic model, indicating that the chemical sorption was the rate-limiting step. Thermodynamic parameters like Gibbs free energy (DeltaG degrees), enthalpy (DeltaH degrees) and entropy (DeltaS degrees) were evaluated by applying the Van't Hoff equation. The thermodynamic study indicated that the adsorption process is spontaneous and exothermic in nature. The desorption studies were carried out using various reagents. The maximum percent desorption of precious metal ions were obtained when the reagent 0.7 M thiourea-2 M HCl was used.     

Adsorption of lead(II) ions onto 8-hydroxy quinoline-immobilized bentonite

In this study, the immobilization of 8-hydroxy quinoline onto bentonite was carried out and it was then used to investigate the adsorption behavior of lead(II) ions from aqueous solutions. The changes of the parameters of pH, contact time, initial lead(II) ions concentration and temperature were tested in the adsorption experiments. The XRD, FTIR, elemental and thermal analyses were done to observe the immobilization of 8-hydroxy quinoline onto natural bentonite. The adsorption was well described by the Langmuir adsorption isotherm model at all studied temperatures. The maximum adsorption capacity was 142.94mgg(-1) from the Langmuir isotherm model at 50 degrees C. The thermodynamic parameters implied that the adsorption process is spontaneous and endothermic. The kinetic data indicate that the adsorption fits well with the pseudo-second-order kinetic model. 8-Hydroxy quinoline-immobilized bentonite can be used as well respective adsorbent for the removal of the heavy metal pollutants according to the results.     

Comparative adsorption of Cu(II), Zn(II), and Pb(II) ions in aqueous solution on the crosslinked chitosan with epichlorohydrin

The crosslinked chitosans synthesized by the homogeneous reaction of chitosan in aqueous acetic acid solution with epichlorohydrin were used to investigate the adsorptions of three metals of Cu(II), Zn(II), and Pb(II) ions in an aqueous solution. The crosslinked chitosan characterized by 13CNMR, SEM, and elemental analysis, and the effects of pH and anion on the adsorption capacity were carried out. The dynamical study demonstrated that the adsorption process was followed the second-order kinetic equation. The results obtained from the equilibrium isotherms adsorption studies of three metals of Cu(II), Zn(II), and Pb(II) ions by being analyzed in three adsorption models, namely, Langmuir, Freundlich, and Dubinnin-Radushkevich isotherm equations, indicated to be well fitted to the Langmuir isotherm equation under the concentration range studied, by comparing the linear correlation coefficients. The order of the adsorption capacity (Qm) for three metal ions was as follows: Cu2+>Pb2+>Zn2+. This technique for syntheses of the crosslinked chitosans with epichlorohydrin via the homogeneous reaction in aqueous acetic acid solution showed that the adsorptions of three metal ions in aqueous solution were followed the monolayer coverage of the adsorbents through physical adsorption phenomena.     

Comparative study of adsorption properties of Turkish fly ashes. I. The case of nickel(II), copper(II) and zinc(II)

The objective of this study was to compare two different Turkish fly ashes (Afsin-Elbistan and Seyitomer) for their ability to remove nickel [Ni(II)], copper [Cu(II)] and zinc [Zn(II)] from an aqueous solution. The effect of contact time, pH, initial metal concentration and fly ash origin on the adsorption process at 20+/-2 degrees C were studied. Batch kinetic studies showed that an equilibrium time of 2h was required for the adsorption of Ni(II), Cu(II) and Zn(II) on both the fly ashes. The maximum metal removal was found to be dependent on solution pH (7.0-8.0 for Ni(II), 5.0-6.0 for Cu(II) and 6.0-7.0 for Zn(II)) for each type of fly ash. With an increase in the concentrations of these metals, the adsorption of Ni(II) and Zn(II) increased while the Cu(II) adsorption decreased on both the fly ashes. Adsorption densities for the metal ions were Zn(II)>Cu(II)>Ni(II) for both the fly ashes. The effectiveness of fly ash as an adsorbent improved with increasing calcium (CaO) content. Adsorption data in the range of pH values (3.0-8.0) using Ni(II) and Cu(II) concentrations of 25+/-2mg/l and Zn(II) concentration of 30+/-2mg/l in solution were correlated using the linear forms of the Langmuir and Freundlich equations. The adsorption data were better fitted to the Langmuir isotherm since the correlation coefficients for the Langmuir isotherm were higher than that for the Freundlich isotherm. The fly ash with high calcium content (Afsin-Elbistan) was found to be a metal adsorbent as effective as activated carbon and, therefore, there are good prospects for the adsorptions of these metals on fly ash with high calcium content in practical applications in Turkey.     

Adsorption characteristics of Cu(II) and Pb(II) onto expanded perlite from aqueous solution

The adsorption characteristics of Cu(II) and Pb(II) onto expanded perlite (EP) from aqueous solution were investigated with respect to the changes in pH of solution, adsorbent dosage, contact time and temperature of solution. For the adsorption of both metal ions, the Langmuir isotherm model fitted to equilibrium data better than the Freundlich isotherm model. Using the Langmuir model equation, the monolayer adsorption capacity of EP was found to be 8.62 and 13.39 mg/g for Cu(II) and Pb(II) ions, respectively. Dubinin-Radushkevich (D-R) isotherm model was also applied to the equilibrium data and the mean free energies of adsorption were found as 10.82 kJ/mol for Cu(II) and 9.12 kJ/mol for Pb(II) indicating that the adsorption of both metal ions onto EP was taken place by chemical ion-exchange. Thermodynamic functions, the change of free energy (DeltaG degrees ), enthalpy (DeltaH degrees ) and entropy (DeltaS degrees ) of adsorption were also calculated for each metal ions. These parameters showed that the adsorption of Cu(II) and Pb(II) ions onto EP was feasible, spontaneous and exothermic at 20-50 degrees C. Experimental data were also evaluated in terms of kinetic characteristics of adsorption and it was found that adsorption process for both metal ions followed well pseudo-second-order kinetics.     

Equilibrium and kinetic studies for the biosorption system of copper(II) ion from aqueous solution using Tectona grandis L.f. leaves powder

The biosorption of copper(II) ions from aqueous solution by Tectona grandis L.f. was studied in a batch adsorption system as a function of pH, metal ion concentration, adsorbent concentration and adsorbent size. The biosorption capacities and rates of copper(II) ions onto T. grandis L.f. were evaluated. The Langmuir, Freundlich, Redlich-Peterson and Temkin adsorption models were applied to describe the isotherms and isotherm constants. Biosorption isothermal data could be well interpreted by the Langmuir model with maximum adsorption capacity of 15.43 mg/g of copper(II) ion on T. grandis L.f. leaves powder. The kinetic experimental data properly correlated with the second-order kinetic model. Various thermodynamic parameters such as deltaG(o), deltaH(o), and deltaS(o) were calculated indicating that this system was a spontaneous and exothermic process.     

The adsorption of Cd(II) ions on sulphuric acid-treated wheat bran

The adsorption of Cd(II) ions which is one of the most important toxic metals by using sulphuric acid-treated wheat bran (STWB) was investigated. The effects of solution pH and temperature, contact time and initial Cd(II) concentration on the adsorption yield were studied. The equilibrium time for the adsorption process was determined as 4 h. The adsorbent used in this study gave the highest adsorption capacity at around pH 5.4. At this pH, adsorption capacity for an initial Cd(II) ions concentration of 100 mg/L was found to be 43.1 mg/g at 25 degrees C for contact time of 4 h. The equilibrium data were analysed using Langmuir and Freundlich isotherm models to calculate isotherm constants. The maximum adsorption capacity (qmax) which is a Langmuir constant decreased from 101.0 to 62.5 mg/g with increasing temperature from 25 to 70 degrees C. Langmuir isotherm data were evaluated to determine the thermodynamic parameters for the adsorption process. The enthalpy change (deltaH(o)) for the process was found to be exothermic. The free energy change (deltaG(o)) showed that the process was feasible. The kinetic results indicated that the adsorption process of Cd(II) ions by STWB followed first-order rate expression and adsorption rate constant was calculated as 0.0081 l/min at 25 degrees C. It was observed that the desorption yield of Cd(II) was highly pH dependent.     

Isotherm studies of lead(II), manganese(II), and cadmium(II) adsorption by Nigerian bentonite clay in single and multimetal solutions

This study was aimed at evaluating the isotherm of lead(II), manganese(II), and cadmium(II) adsorption in single and multimetal solutions using Nigerian bentonite. The natural and calcined clays were characterized for specific surface area, surface morphology, elemental composition, and cation exchange capacity (CEC). The adsorption data were analyzed and interpreted using isotherm models. The natural bentonite exhibits a specific surface area of 23.5?m²/g and a CEC value of 47.7 mEq/100?g and displays a higher adsorption capacity of all heavy metals in both single and multimetal solutions than the calcined bentonite. The removal of lead(II) by natural bentonite in single-component system is 0.0448?mmol/g. The order of selectivity is lead(II)?>?cadmium(II)?>?manganese(II). Result also shows that both clays demonstrate a preferable adsorption toward lead(II). Lead(II) adsorption is less affected by the presence of counter cations in multimetal solution. The adsorption of heavy metals onto Dijah-Monkin bentonite is site selective and site specific, and the adsorption data are well presented by the Langmuir model. The CEC could be the primary mechanism for the uptake of heavy metals, and the removal capacity was shown to depend on the ionic radius of metal ions.     

Biosorption of cadmium(II), zinc(II) and lead(II) by Penicillium simplicissimum: Isotherms, kinetics and thermodynamics

The isotherms, kinetics and thermodynamics of Cd(II), Zn(II) and Pb(II) biosorption by Penicillium simplicissimum were investigated in a batch system. The effects of pH, initial metal ions concentration, biomass dose, contact time, temperature and co-ions on the biosorption were studied. Adsorption data were well described by both the Redlich–Peterson and Langmuir model. Chemical ion-exchange was found to be an important process based on free energy value from Dubini–Radushkevich isotherm for all metal ions. The results of the kinetic studies of all metal ions at different temperature showed that the rate of adsorption followed the pseudo second-order kinetics well. The thermodynamics constants ΔG°, ΔH° and ΔS° of the adsorption process showed that biosorption of Cd(II), Zn(II) and Pb(II) ions on Penicillium simplicissimum were endothermic and spontaneous.     

Copper(II) and zinc(II) biosorption on Pinus sylvestris L

The biosorption properties of copper(II) and zinc(II) onto a cone biomass of Pinus sylvestris L. was investigated by using batch techniques. The biosorption studies carried out with single metal solutions. The removal of copper(II) and zinc(II) from aqueous solution increased with pH and sharply decreased when pH of the solution was decreased. The maximum biosorption efficiency of P. sylvestris was 67% and 30% for Cu(II) and Zn(II), respectively. Batch kinetic and isotherm of biosorption metal ions were investigated. The second-order kinetic model was used to correlate the experimental data. The Freundlich and Langmuir model can describe the adsorption equilibrium of metal(II) on cone biomass. The biosorption constants were found from the Freundlich and Langmuir isotherms at 25 degrees C. It is found that the biosorption data of metals on cone biomass fitted both the Freundlich and Langmuir adsorption models.     

An investigation into the sorption of heavy metals from wastewaters by polyacrylamide-grafted iron(III) oxide

An adsorbent for heavy metals was synthesized by introducing carboxylate functional group into polyacrylamide-grafted hydrous iron(III) oxide. The product exhibits a very high adsorption potential for Pb(II), Hg(II) and Cd(II). The removal of metal ions by adsorption on adsorbent has been found to be contact time, concentration, pH and temperature dependent. The process follows first-order reversible kinetics. The intraparticle diffusion of metal ions through pores in the adsorbent was shown to be the main rate-limiting step. The optimum pH range for the removal of metal ions was found to be 5.0-6.0. The thermodynamic parameters such as free energy change, enthalpy change and entropy change have been calculated to predict the nature of adsorption. The adsorption data were fitted using the Langmuir equation and maximum adsorption for each metal was estimated using their respective Langmuir equation constants. The method was applied for synthetic wastewaters. NaCl regeneration has been tried for several cycles with a view to recover the adsorbed metal ions and also to restore the sorbent to its original state.     

Adsorption of copper (II), chromium (III), nickel (II) and lead (II) ions from aqueous solutions by meranti sawdust

The present study proposed the use of meranti sawdust in the removal of Cu(II), Cr(III), Ni(II) and Pb(II) ions from synthetic aqueous solutions. Batch adsorption studies showed that meranti sawdust was able to adsorb Cu(II), Cr(III), Ni(II) and Pb(II) ions from aqueous solutions in the concentration range 1–200 mg/L. The adsorption was favoured with maximum adsorption at pH 6, whereas the adsorption starts at pH 1 for all metal ions. The effects of contact time, initial concentration of metal ions, adsorbent dosage and temperature have been reported. The applicability of Langmuir, Freundlich, and Dubinin–Radushkevich (D–R) isotherm was tried for the system to completely understand the adsorption isotherm processes. The adsorption kinetics tested with pseudo-first-order and pseudo-second-order models yielded high R² values from 0.850 to 0.932 and from 0.991 to 0.999, respectively. The meranti sawdust was found to be cost effective and has good efficiency to remove these toxic metal ions from aqueous solution.     

Removal of copper(II) and lead(II) from aqueous solution by manganese oxide coated sand II. Equilibrium study and competitive adsorption

The adsorption equilibrium of MOCS and the Cu(II) and Pb(II) ions removal capacity by MOCS in single-(non-competitive) and binary-(competitive) component sorption systems from aqueous solutions were investigated. The equilibrium data were analyzed using the Langmuir, Freundlich, Temkin and Redlich-Peterson isotherms. The characteristic parameters for each isotherm were determined. The Langmuir and Redlich-Peterson isotherms provided the best correlation for both Cu(II) and Pb(II) onto MOCS. From the Langmuir isotherms, maximum adsorption capacities of MOCS towards Cu(II) and Pb(II) are determined at different temperature. The maximum adsorption capacity of Cu(II) and Pb(II) per gram MOCS in single component sorption systems were from 5.91 and 7.71 micromol to 7.56 and 9.22 micromol for the temperature range of 288-318 K, respectively. The order of affinity based on a weight uptake by MOCS was as follows: Pb(II)>Cu(II). The same behavior was observed during competitive adsorption that is in the case of adsorption from their binary solution. The thermodynamic parameters (DeltaG degrees , DeltaH degrees , and DeltaS degrees) for Cu(II) and Pb(II) sorption on MOCS were also determined from the temperature dependence. This competitive adsorption showed that the uptake of each metal was considerably reduced with an increasing concentration of the other, the adsorption of Cu(II) being more strongly influenced by Pb(II) than vice versa due to the higher affinity of MOCS for the latter.     

Kinetics and equilibrium isotherms of adsorption of Pb(II) and Cu(II) onto raw and arginine-modified montmorillonite

Arg-Mt, was fabricated by modifying sodium montmorillonite (Na-Mt) with Arginine monohydrochloride (Arg salt), to adsorb Pb(II) and Cu(II) in aqueous solution. The X-ray powder diffraction (XRD), Fourier transform infrared (FTIR) spectrum, thermal analysis (TG/DTG), Brunauer-Emmett-Teller (BET) and Scanning electron microscope (SEM) were employed to investigate the properties of Na-Mt and Arg-Mt. The effects of the amount of modifier, pH value, the initial concentration of M(II), temperature and contact time were tested in a single adsorption system. The isotherm model was well matched with the Langmuir curve and the kinetic adsorption fitted well with the pseudo-second-order rate equation. The saturated adsorption of Pb(II) and Cu(II) by Arg-Mt were 124.69 and 29.15?mg/g, respectively, which were higher than that of Na-Mt (89.08 and 23.93?mg/g). The thermodynamic equation indicated that the adsorption process was spontaneous, endothermic, and the randomness of the samples changed a little after adsorption. The adsorption capacity of heavy metal ions in the binary co-adsorption system was poor than single adsorption system. Furthermore, the adsorbed M(II) onto Arg-Mt can hardly be dissolved under weak acidic condition (pH?>?4) according to the desorption experiments. High-efficiency and low-cost make Arg-Mt to be used in the removal of heavy ions in aqueous solution.     

Biosorption of copper(II) by nonliving lichen biomass of Cladonia rangiformis hoffm

Biosorption of heavy metals can be an effective process for the removal of heavy metal ions from aqueous solutions. In this study, the adsorption properties of lichen biomass of Cladonia rangiformis hoffm. for copper(II) were investigated by using batch adsorption techniques. The effects of initial metal ion concentration, initial pH, biosorbent concentration, stirring speed and contact time on biosorption efficiency were studied. In the experiments the optimum pH value was found out 5.0 which was the native pH value of solution. The experimental adsorption data were fitted to the Langmuir adsorption model. The highest metal uptake was calculated from Langmuir isotherm and found to be 7.6923 mg Cu(II)/g inactivated lichen at 15 degrees C. The results indicated that the biomass of C. rangiformis is a suitable biosorbent for removing Cu(II) from aqueous solutions.     

Adsorption of Cd(II) and Cu(II) from aqueous solution by carbonate hydroxylapatite derived from eggshell waste

Carbonate hydroxylapatite (CHAP) synthesized by using eggshell waste as raw material has been investigated as metal adsorption for Cd(II) and Cu(II) from aqueous solutions. The effect of various parameters on adsorption process such as contact time, solution pH, amount of CHAP and initial concentration of metal ions was studied at room temperature to optimize the conditions for maximum adsorption. The results showed that the removal efficiency of Cd(II) and Cu(II) by CHAP could reach 94 and 93.17%, respectively, when the initial Cd(II) concentration 80 mg/L and Cu(II) 60 mg/L and the liquid/solid ratio was 2.5 g/L. The equilibrium sorption data for single metal systems at room temperature could be described by the Langmuir and Freundlich isotherm models. The highest value of Langmuir maximum uptake, (b), was found for cadmium (111.1mg/g) and copper (142.86 mg/g). Similar Freundlich empirical constants, K, were obtained for cadmium (2.224) and copper (7.925). Ion exchange and surface adsorption might be involved in the adsorption process of cadmium and copper. Desorption experiments showed that CaCl2, NaCl, acetic acid and ultrasonic were not efficient enough to desorb substantial amount of metal ions from the CHAP. The results obtained show that CHAP has a high affinity to cadmium and copper.