Luminescence properties of Eu ions doped in Y2−xGdxO3 thin films grown by pulsed laser deposition method

Luminescence properties of Y_2−xGd_xO₃:Eu³⁺ (x = 0 to 2.0) thin films are investigated by site-selective laser excitation spectroscopy. The films were grown by pulsed laser deposition method on SiO₂ (100) substrates. Cubic phase Y₂O₃ and Gd₂O₃ and monoclinic phase Gd₂O₃ are identified in the excitation spectrum of the ⁷F₀ → ⁵D₀ transition of Eu³⁺. The emission spectra of the ⁵D₀ → ⁷F_J (J = 1 and 2) transition from individual Eu³⁺ centers were obtained by tuning the laser to resonance with each excitation line. The excitation line at around 580.60 nm corresponds to the line from Eu³⁺ with C₂ site symmetry of cubic phase. New lines at 578.65 and 582.02 nm for the C_S sites of Gd₂O₃ with monoclinic phase are observed by the incorporation of Gd in Y₂O₃ lattice. Energy transfer occurs between Eu³⁺ ions at the C_S sites and from Eu³⁺ ions at the C_S sites to those at the C₂ site in Y_2−xGd_xO₃.     

Photoluminescence properties of RE-activated Na3GdP2O8 (RE = Tb, Dy, Eu, Sm) under VUV excitation

RE³⁺-activated monoclinic Na₃GdP₂O₈ (RE³⁺ = Tb³⁺, Dy³⁺, Eu³⁺, Sm³⁺) phosphors have been synthesized by a solid-state reaction method. Their photoluminescence properties in the vacuum ultraviolet (VUV) region were investigated. By analyzing their excitation spectra, the host-related absorption band was determined to be around 166 nm. The f-d transition bands and the charge transfer bands for Na₃GdP₂O₈:RE³⁺ (RE³⁺ = Tb³⁺, Dy³⁺, Eu³⁺, Sm³⁺) were assigned and corroborated. For the sample Na₃GdP₂O₈:5%Tb³⁺, the strong bands at around 202 and 221 nm are assigned to the 4f-5d spin-allowed transitions and the weak band at 266 nm is related to the spin-forbidden transition of Tb³⁺. For Na₃GdP₂O₈:5%Dy³⁺, the broad band at 176 nm could be related to the f-d transitions of Dy³⁺ and the O²⁻ → Dy³⁺ charge transfer band (CTB) besides the host-related absorption. In the excitation spectrum of Eu³⁺ doped sample, the O²⁻ → Eu³⁺ CTB is observed to be at 245 nm. For the Sm³⁺ doped sample, the O²⁻ → Sm³⁺ CTB is not distinguished obviously and is overlapped with the host-related absorption band.     

Influence of excitation wavelengths on luminescent properties of Sr3Al2O6:Eu, Dy phosphors prepared by sol-gel-combustion processing

Eu²⁺ and Dy³⁺ ion co-doped Sr₃Al₂O₆ red-emitting long afterglow phosphor was synthesized by sol-gel-combustion methods using Sr(NO₃)₂, Al(NO₃)₃·9H₂O, Eu₂O₃, Dy₂O₃, H₃BO₃ and C₆H₈O₇·H₂O as raw materials. The crystalline structure of the phosphors were characterized by X-ray diffraction, luminescent properties of phosphors were analyzed by fluorescence spectrophotometer. The effect of excitation wavelengths on the luminescent properties of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors was discussed. The emission peak of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphor lays at 516 nm under the excitation of 360 nm, and at 612 nm under the excitation of 468 nm. The results reveal that the Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphor will emit a yellow-green light upon UV illumination, and a bright red light upon visible light illumination. The emission mechanism was discussed according to the effect of nephelauxetic and crystal field on the 4f⁶5d¹ → 4f⁷ transition of the Eu²⁺ ions in Sr₃Al₂O₆. The afterglow time of (Sr_0.94Eu_0.03Dy_0.03)₃ Al₂O₆ phosphors lasts for over 600s after the excited source was cut off.     

Optical properties of transparent Dy doped Ba2TiSi2O8 glass ceramic

The Ba₂TiSi₂O₈ is a well known piezoelectric, ferroelectric and non-linear crystal. Nanocrystals of Ba₂TiSi₂O₈ doped with 1.5 Dy³⁺ have been obtained by thermal treatment of a precursor glass and their optical properties have been studied. X-ray diffraction patterns and optical measurements have been carried out on the precursor glass and glass ceramic samples. The emission spectra corresponding to the Dy³⁺: ⁴F_9/2 → ⁶H_13/2 (575 nm), ⁴F_9/2 → ⁶H_11/2 (670 nm) and ⁴F_9/2 → ⁶H_9/2 (757 nm) transitions have been obtained under laser excitation at 473 nm. These measurements confirm the incorporation of the Dy³⁺ ions into the Ba₂TiSi₂O₈ nanocrystals which produces an enhancement of luminescence at 575 nm. At this wavelength has been demonstrated a maximum optical amplification around 1.9 cm⁻¹ (∼8.2 dB/cm).     

A yellow-emitting Ca3Si2O7: Eu phosphor for white LEDs

A series of yellow-emitting phosphors based on a silicate host matrix, Ca_3 − xSi₂O₇: xEu²⁺, was prepared by solid-state reaction method. The structure and photoluminescent properties of the phosphors were investigated. The XRD results show that the Eu²⁺ substitution of Ca²⁺ does not change the structure of Ca₃Si₂O₇ host and there is no impurity phase for x < 0.12. The SEM images display that phosphors aggregate obviously and the shape of the phosphor particle is irregular. The EDX results reveal that the phosphors consist of Ca, Si, O, Eu and the concentration of these elements is close to the stoichiometric composition. The Ca_3 − xSi₂O₇: xEu²⁺ phosphors can be excited at a wavelength of 300-490 nm, which is suitable for the emission band of near ultraviolet or blue light-emitting-diode (LED) chips. The phosphors exhibit a broad emission region from 520 to 650 nm and the emission peak centered at 568 nm. In addition, the shape and the position of the emission peak are not influenced by the Eu²⁺ concentration and excitation wavelength. The phosphor for x = 0.045 has the strongest excitation and emission intensity, and the Ca_3 − xSi₂O₇: xEu²⁺ phosphors can be used as candidates for the white LEDs.     

Preparation and upconversion property of TeO2:Er/Yb nanoparticles

Different crystal structure of TeO₂ nanoparticles were used as the host materials to prepare the Er³⁺/Yb³⁺ ions co-doped upconversion luminescent materials. The TeO₂ nanoparticles mainly kept the original morphology and phase after having been co-doped the Er³⁺/Yb³⁺ ions. All the as-prepared TeO₂:Er³⁺/Yb³⁺ nanoparticles showed the green emissions (525 nm, 545 nm) and red emission (667 nm) under 980 nm excitation. The green emissions at 525 nm, 545 nm and red emission at 667 nm were attributed to the ²H_11/2 → ⁴I_15/2, ⁴S_3/2 → ⁴I_15/2 and ⁴F_9/2 → ⁴I_15/2 transitions of the Er³⁺ ions, respectively. For the α-TeO₂:Er³⁺/Yb³⁺ (3/10 mol%) nanoparticles, three-photon process involved in the green (²H_11/2 → ⁴I_15/2) emission, while two-photon process involved in the green (⁴S_3/2→⁴I_15/2) and red (⁴F_9/2 → ⁴I_15/2) emissions. For the β-TeO₂:Er³⁺/Yb³⁺ (3/10 mol%) nanoparticles, two-photon process involved in the green (²H_11/2 → ⁴I_15/2), green (⁴S_3/2 → ⁴I_15/2) and red (⁴F_9/2 → ⁴I_15/2) emissions. It suggested that the crystal structure of TeO₂ nanoparticles had an effect on transition processes of the Er³⁺/Yb³⁺ ions. The emission intensities of the α-TeO₂:Er³⁺/Yb³⁺ (3/10 mol%) nanoparticles and β-TeO₂:Er³⁺/Yb³⁺ (3/10 mol%) nanoparticles were much stronger than those of the (α + β)-TeO₂:Er³⁺/Yb³⁺ (3/10 mol%) nanoparticles.     

Improved luminescence from Y2Sn2O7:Tb nanoparticles co-doped with Sb ions

Very small nanoparticles (size 3-5 nm) of Y₂Sn₂O₇, Y₂Sn₂O₇:Tb³⁺ and Sb³⁺ co-doped Y₂Sn₂O₇:Tb³⁺ were prepared at a relatively low temperature of 700 °C. Y₂Sn₂O₇ host is characterised by an emission around 436 nm, which is arising from the oxygen vacancies present in the lattice. Tb³⁺ emission improves significantly when Sb³⁺ ions are co-doped with Y₂Sn₂O₇:Tb³⁺ nanoparticles. Incorporation of Sb³⁺ ions at the Y³⁺ site of Y₂Sn₂O₇ lattice and associated lattice distortion around Tb³⁺/Y³⁺ ions brought about by the difference in the stable coordination number of Sb³⁺ and Y³⁺ ions are responsible for the improved Tb³⁺ emission from the co-doped samples.     

White light generation in Al2O3:Ce:Tb:Mn films deposited by ultrasonic spray pyrolysis

Aluminium oxide (Al₂O₃) films doped with CeCl₃, TbCl₃ and MnCl₂ were deposited at 300 °C with the ultrasonic spray pyrolysis technique. The films were analysed using the X-ray diffraction technique and they exhibited a very broad band without any indication of crystallinity, typical of amorphous materials. Sensitization of Tb³⁺ and Mn²⁺ ions by Ce³⁺ ions gives rise to blue, green and red simultaneous emission when the film activated by such ions is excited with UV radiation. The overall efficiency of such energy transfer results to be about 85% upon excitation at 312 nm. Energy transfer from Ce³⁺ to Tb³⁺ ions through an electric dipole-quadrupole interaction mechanism appears to be more probable than the electric dipole-dipole one. A strong white light emission for the Al₂O₃:Ce³⁺(1.3 at.%):Tb³⁺(0.2 at.%):Mn²⁺(0.3 at.%) film under UV excitation is observed. The high efficiency of energy transfer from Ce³⁺ to Tb³⁺ and Mn²⁺ ions, resulting in cold white light emission (x = 0.30 and y = 0.32 chromaticity coordinates) makes the Ce³⁺, Tb³⁺ and Mn²⁺ triply doped Al₂O₃ film an interesting material for the design of efficient UV pumped phosphors for white light generation.     

Photoluminescence properties of Y2O3:Tb and YBO3:Tb green phosphors synthesized by hydrothermal method

In this work, two Tb³⁺ activated green phosphors: Y₂O₃:Tb³⁺ and YBO₃:Tb³⁺ were prepared by hydrothermal method. Photoluminescence properties of both phosphors were studied in details. Both phosphors exhibit similar luminescent characteristics symbolized by the dominant green emission at 545 nm. Concentration quenching occurs at the Tb³⁺ concentration of 1.60 atomic% and 2.57 atomic% for Y₂O₃:Tb³⁺ and YBO₃:Tb³⁺, respectively. Luminescence decay properties were characterized to better understand the mechanism of concentration quenching. Based on the calculation, the concentration quenching in both phosphors was caused by the dipole–dipole interaction between Tb³⁺ ions.     

Synthesis and luminescent characteristic of Eu-doped (Gd,Lu)2O3 nanopowders

Eu³⁺ doped (Gd,Lu)₂O₃ nanopowders with particle sizes ranging from 20 to 70 nm were synthesized by the co-precipitant method using mixed precipitants, namely the mixture of ammonium hydroxide (NH₃⋅H₂O) and ammonium hydrogen carbonate (NH₄HCO₃). The precipitate precursor prepared by this method was believed to possess a basic carbonate composition and its thermal decomposition of the (Gd,Lu)₂O₃:Eu³⁺ powders were investigated by Thermogravimetric analysis and differential thermal analysis (TG-DTA). This preparation was followed by a calcination process at 800-1100 °C and corresponding phosphor structure were examined by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Photoluminescence measurement of the (Gd,Lu)₂O₃:Eu³⁺ particles show typical red emission at the 612 nm corresponding to the ⁵D₀ → ⁷F₂ transition. We found that the optimal Eu³⁺ molar doping concentration, calcined temperature and reaction time were 7 mol%, 1000 °C, and 2 h, respectively, which is helpful to obtain the final transparent ceramics with excellent properties.     

High pressure luminescence and time resolved spectra of La2Be2O5:Pr

We present luminescence, luminescence excitation and luminescence time resolved spectra of La₂Be₂O₅:Pr³⁺ system. We used high pressure spectroscopy approaches, with high pressure applied in diamond anvil cell (DAC) and sapphire anvil cell (SAC), for detailed analysis of luminescence related to the 4f5d → 4f² and 4f² → 4f² transitions. We present effect of up-converted luminescence related to 4f5d → 4f² transition excited with 488 nm. We also discussed possibility of existence of praseodymium trapped exciton (PTE) states in La₂Be₂O₅:Pr³⁺ system. Lack of the PTE is attributed to high quantity of bulk modulus of this material.     

Crystallization behavior and thermoelectric characteristics of the electrodeposited Sb2Te3 thin films

Crystallization behavior of the electrodeposited Sb₂Te₃ film was characterized and the effect of the amorphous-crystalline transition on the Seebeck coefficient was evaluated. The as-electrodeposited Sb₂Te₃ film was amorphous and exhibited the Seebeck coefficient of 268-322 μV/K, which was much larger than the value of the crystalline Sb₂Te₃ film. When annealed at temperatures above 100 °C, the Seebeck coefficient of the Sb₂Te₃ film dropped significantly to 78-107 μV/K due to the amorphous-crystalline transition at 94 °C. The thermal stability of the electrodeposited Sb₂Te₃ film was improved by the addition of Cu, and the crystallization temperature of the CuSbTe film increased up to 149.5 °C.     

Sr3.5Mg0.5Si3O8Cl4: Eu bluish-green-emitting phosphor for NUV-based LED

Sr₄Si₃O₈Cl₄:Eu²⁺ and Sr_3.5Mg_0.5Si₃O₈Cl₄:Eu²⁺ phosphors were prepared by a conventional solid state reaction (SS). Excited by 370 nm near-ultraviolet light, the phosphors show an efficient bluish-green wide-band emission centering at 484 nm, which originates from the 4f5d¹ → 4f⁷ transition of Eu²⁺ ion. The excitation spectra of the phosphors are a broad band extending from 250 nm to 400 nm. Mg²⁺-codoping greatly enhances the bluish-green emission of the phosphors. An LED was fabricated by coating the Sr_3.5Mg_0.5Si₃O₈Cl₄:0.08Eu²⁺ phosphor onto an ~ 370 nm-emitting InGaN chip. The LED exhibits bright bluish-green emission under a forward bias of 20 mA. The results indicate that Sr_3.5Mg_0.5Si₃O₈Cl₄:0.08Eu²⁺ is a candidate as a bluish-green component for fabrication of NUV-based white LEDs.     

Varistor properties of ZnO-Pr6O11-CoO-Cr2O3-Y2O3-In2O3 ceramics

The varistor properties of the ZnO-Pr₆O₁₁-CoO-Cr₂O₃-Y₂O₃-In₂O₃ ceramics were investigated for different concentrations of In₂O₃. The increase of In₂O₃ concentration slightly increased the sintered density (5.60-5.63 g/cm³) and slightly decreased the average grain size (3.4-2.9 μm). The breakdown field increased from 6023 to 14822 V/cm with increasing concentration of In₂O₃. The nonlinear coefficient increased from 17.6 to 44.6 for up to 0.005 mol%, whereas the further doping caused it to decrease to 36.8. In₂O₃ acted as an acceptor due to the donor concentration, which decreases in the range of 1.02 × 10¹⁷ to 0.24 × 10¹⁷/cm³ with increasing concentration of In₂O₃.     

Luminescence properties of Ba2LiB5O10:Dy phosphor

A novel warm white phosphor Ba₂LiB₅O₁₀:Dy³⁺ with various Dy³⁺ concentrations was synthesized by the conventional solid-state reaction at 800 °C. The crystal structure of the phosphor was characterized by X-ray diffraction (XRD). The photoluminescence properties of Ba₂LiB₅O₁₀:Dy³⁺ were investigated, and the critical concentration of the activator ion (Dy³⁺) was found to be 0.04 mol per formula unit. Under the ultraviolet excitation of 348 nm, the phosphor presented warm white luminescence with dominating emissions at 484.6 and 577 nm, corresponding to ⁴F_9/2-⁶H_15/2, ⁴F_9/2-⁶H_13/2 transitions, respectively. The chromatic properties of the typical sample Ba₂LiB₅O₁₀:0.04Dy³⁺ phosphor have been found to have chromaticity coordinates of x = 0.31 and y = 0.35.     

Effects of Zn doping on the structural and luminescent properties of Sr4Si3O8Cl4:Eu phosphors

Sr₄Si₃O₈Cl₄: Eu²⁺ phosphors were synthesized by the solid-reaction at high temperature. The emission intensity reaches a maximum at 0.08 mol% of Eu²⁺ concentration. The present paper mainly focused on the effects of Zn²⁺ on the crystallization behavior and photoluminescence (PL) properties of Sr₄Si₃O₈Cl₄:0.08Eu²⁺. Results suggested that no new phase is introduced by co-doping with a small amount of Zn²⁺ ions, but when co-doped with excessive amount of Zn²⁺ ions, Sr₂ZnSi₂O₇ appears. We find that the co-doping of a small amount of Zn²⁺ could remarkably improve the PL intensity of Sr₄Si₃O₈Cl₄:0.08Eu²⁺. When x = 0.05, the intensity of Sr₄Si₃O₈Cl₄:0.08Eu²⁺,xZn²⁺ was increased up to 2.3 times that of pure Sr₄Si₃O₈Cl₄:0.08Eu²⁺, which could be attributed to the flux effect of Zn²⁺ ions, and the Zn²⁺ doping reduces the opportunities of the energy transfer between Eu²⁺.     

Basic study of single crystal fibers of Pr:Lu3Al5O12 scintillator for gamma-ray imaging applications

Single-crystalline fibers were grown from 0.25, 0.70, and 1.50 mol% Pr-doped Lu₃Al₅O₁₂ (LuAG) melts by the micro-pulling down (μ-PD) method with a diameter of 0.3-0.5 mm and a length of about 200 mm. They were cut to 10 mm long specimens, and their scintillation properties, including light yield and decay time profile, were examined. These results were compared with corresponding properties of the specimens (0.8×0.8×10 mm³) cut from the bulk crystals produced by conventional Czochralski (CZ) growth. The μ-PD-grown fibers demonstrated relatively low light yield and had the same decay time constant when compared with those of the samples cut from the CZ-grown crystals. The fiber crystals were used to assemble scintillating arrays with dimensions of Ø 0.5×10 mm²×20 pixels and Ø 0.3×10 mm²×30 pixels coated by a BaSO₄ reflector. After optical coupling with a position sensitive photomultiplier tube, the fiber-based arrays demonstrated acceptable imaging capability with a spatial resolution of about 0.5 mm.     

Growth and spectral properties of Cr:KAl(MoO4)2 crystal

The Cr³⁺:KAl(MoO₄)₂ single crystal was grown by top seeding solution growth method (TSSG). Based on the absorption and emission spectra, the crystal field strength Dq, the Racah parameters B and C, the effective phonon energy ?ω and the Huang-Rhys factor S were calculated: Dq = 1494.8 cm^− 1, B = 585.5 cm^− 1 and C = 3049 cm^− 1, ?ω = 373.8 cm^− 1 and the Huang-Rhys factor S = 3.74, respectively. The value Dq/B = 2.55 indicates that Cr³⁺ ion occupies the strong crystal field site in KAl(MoO₄)₂ crystal. A comparison of crystal field parameters for Cr³⁺:KAl(MoO₄)₂ with other Cr³⁺-doped crystals was presented. The results of spectral measurement show that Cr³⁺:KAl(MoO₄)₂ may be a potential candidate for broadband laser applications.     

Long wavelength Ce emission in Y6Si3O9N4 phosphors for white-emitting diodes

Y₆Si₃O₉N₄:Ce³⁺ phosphor was prepared by a solid-state reaction in reductive atmosphere. X-ray powder diffraction (XRD) analysis confirmed the formation of Y₆Si₃O₉N₄:Ce³⁺. Scanning electron microscopy (SEM) observation indicated that the microstructure of the phosphor consisted of irregular fine grains with an average size of about 5 μm. Photoluminescence (PL) measurements showed that the phosphor can be efficiently excited by near ultraviolet (UV) or blue light excitation, and exhibited bright green emission peaked at about 525 nm. Compared with Ce³⁺-doped Y₄Si₂O₇N₂ phosphors, Ce³⁺-doped Y₆Si₃O₉N₄ phosphors showed longer wavelengths of both excitation and emission. The Y₆Si₃O₉N₄:Ce³⁺ is a potential green-emitting phosphor for white LEDs.     

Observation of broadband infrared luminescence in a novel Bi-doped P2O5-B2O3-Al2O3 glass

A novel Bi-doped P₂O₅-B₂O₃-Al₂O₃ glass was investigated, and strong broadband NIR (near infrared) luminescence was observed when the sample was excited by 445 nm, 532 nm, 808 nm and 980 nm lasers, respectively. The max FWHM with 312 nm, the lifetime with 580 μs and the σ_emτ product with 5.3 × 10^− 24 cm² s were obtained which indicates that this glass is a promising material for broadband optical amplifier and tunable laser. The effect of the introduction of B₂O₃ on the glass structure and Bi-ions illuminant mechanism were discussed and analyzed. It is suggested that the introduction of B₂O₃ makes the glass structure closer, and the broadband NIR emission derives from Bi⁰:²D_3/2 → ⁴S_3/2 and Bi⁺:³P₁ → ³P₀ transitions.