共查询到19条相似文献,搜索用时 203 毫秒
1.
当今世界,全球能源危机和环境污染问题日趋紧迫,严重危害人类健康并制约着人类社会发展。为了人类可持续发展,迫切需要开发和应用清洁无污染的新能源来解决环境问题。近年来,光催化氧化技术因其室温深度反应以及可直接利用太阳能作为光源来驱动反应等特点,成为一种高效、理想的环境污染治理技术,引起了各国研究者的密切关注,开发和应用高效的光催化剂已成为环境领域的研究热点。过去几十年,二氧化钛(TiO_2)因无毒、廉价易得、稳定性好等特点,成为研究最广的半导体光催化剂。然而,较窄的光频率响应范围、低的太阳能利用率等缺点限制了其实用化进程。为此,研究人员采用各种不同的制备方法,研究开发了大量具有不同结构的非TiO_2基光催化材料,包括简单氧化物、复合金属氧化物、钙钛矿型复合氧化物等。其中,钨酸锌(ZnWO_4)是一种具有宽禁带、高激发能、高紫外光响应、高催化活性等独特物理化学特性的重要新型非TiO_2基半导体光催化剂,被认为是最有潜力的金属钨酸盐光催化剂之一,其纳米粉体的制备合成及性能研究可为可见光催化降解有机污染物开辟一条新的路径,具有极其重要的研究价值,也是近些年来新型光催化剂研究的焦点。ZnWO_4半导体光催化剂的晶体形貌、尺寸、组成、掺杂物等对其光催化活性具有重要影响。目前,研究者们已通过固相反应法、水热法、溶剂热法、溶胶-凝胶法、化学沉淀法、微乳液法、模板法等不同的制备方法合成了具有不同形貌、尺寸和结晶度的ZnWO_4纳米光催化剂,探讨了制备工艺、晶体特性(形貌、尺寸、组成、结晶程度等)、光催化性能之间的关系。但这些方法合成的ZnWO_4光响应区域仍然较窄,只能吸收太阳光谱中具有较高能量的紫外光,其光量子产率仍然较低。为了进一步提高ZnWO_4的光响应范围,科学家们采用掺杂改性和材料复合等多种活性改进方法来提高其光电转换效率、拓宽光波吸收范围,使其具有良好的可见光响应,优化了其光催化性能。因此,加深制备工艺和性能改性方法对ZnWO_4晶体形貌、尺寸、组成等特性影响以及这些特性对光催化活性影响的理解,对进一步推进钨酸盐光催化材料的研究和应用具有重要的科学意义和实用价值。基于此,本文在分析ZnWO_4晶体结构特点的基础上,主要从制备方法、掺杂改性和材料复合这三个方面综述了近年来ZnWO_4光催化剂的研究进展,探讨了其结构、形貌、性能之间的相互关系,并进一步指出了ZnWO_4光催化剂的发展前景及提高其光催化性能的主要措施。 相似文献
2.
锡酸锌(Zn2SnO4)具有良好的传导率、较高的电子迁移率、物理和化学性质稳定且无毒的特性,是满足可持续发展要求的典型光催化剂之一。介绍了Zn2SnO4光催化剂的结构特征和制备方法;系统总结了具代表性的改性策略,包括离子掺杂、构建异质结、单质负载和形貌调控等;同时,简要介绍了其在光催化降解有机物、产氢、CO2转化等领域的应用。最后,对Zn2SnO4基光催化材料未来的发展进行总结和展望;为高效Zn2SnO4基光催化剂的构建提供一些新的思路与方向。 相似文献
3.
4.
5.
6.
为进一步提高钒酸铁(FeVO4)光催化活性,采用液相沉淀法分别制备钒酸铁和钒酸铜前躯体,再将钒酸铁和钒酸铜前驱体混合后进行热处理,制备了铜掺杂钒酸铁光催化剂,并采用X射线衍射(XRD)、扫描电子显微镜(SEM)、表面积(BET)和X射线光电子能谱分析(XPS)对样品进行表征和分析.在可见光照射下,通过光催化降解甲基橙溶液评价Cu掺杂对FeVO4光催化剂活的影响.结果表明,Cu/FeVO4光催化剂为三斜型,当掺杂质量分数大于5%时,晶体中出现新相Cu3Fe4(VO4)6;掺杂后样品的表面形貌产生了变化,但其比表面积变化较小;Cu/FeVO4样品的光催化活性大幅提高,主要是由于FeVO4和新相间起到类似复合半导体的作用;在所进行实验的条件下,钒酸铜的最佳掺杂质量分数为5%时,掺杂后的FeVO4对甲基橙溶液的脱色率较未掺杂前提高30%左右. 相似文献
7.
8.
以硝酸铋(Bi(NO_3)_3·5H_2O)、硝酸银(AgNO_3)、氯化钾(KCl)为原料,通过无模板、无加热、无表面活性剂的绿色化学方法制备了BiOCl片组装纳米花球,并在它的基础上采用浸渍法负载AgCl实现了对它的改性。以罗丹明B(RhB)和甲基橙(MO)为光催化反应降解模型,进行了光催化活性测试,考察了不同浸渍次数的AgCl对BiOCl光催化剂反应活性和稳定性的影响。用XRD、SEM、EDS、UV-Vis吸收光谱等手段对其结构、形貌、光谱吸收性能等进行了表征。研究表明,AgCl改性的BiOCl复合光催化剂的光催化性能明显优于纯BiOCl,当浸渍2遍时,光催化降解RhB活性最佳,当浸渍5遍时,光催化降解MO活性最佳。 相似文献
9.
氧化锌/氧化镁纳米复合材料的制备及其光催化性能研究 总被引:1,自引:0,他引:1
采用微波辅助共沉淀法制备了纳米氧化锌/氧化镁(ZnO/MgO)光催化剂,并对催化剂样品进行了X射线衍射、透射电镜、红外光谱以及紫外-可见吸收光谱等表征。以亚甲基蓝(MB)为目标降解物对不同锌镁比的ZnO/MgO催化剂样品及相同方法下合成的ZnO及MgO进行光催化降解实验。结果表明:合成的纳米ZnO/MgO光催化剂由立方相的ZnO和非晶相的MgO组成,其尺寸均匀,在40nm左右,并在紫外区域吸收性能良好。光催化降解MB实验表明,锌镁比为2∶1时ZnO/MgO催化剂的光催化性能最佳。 相似文献
10.
11.
Morrison SA Cahill CL Carpenter EE Calvin S Harris VG 《Journal of nanoscience and nanotechnology》2005,5(9):1323-1344
Nanoparticulate ferrites such as manganese zinc ferrite and nickel zinc ferrite hold great promise for advanced applications in power electronics. The use of these materials in current applications requires fine control over the nanoparticle size as well as size distribution to maximize their packing density. While there are several techniques for the synthesis of ferrite nanoparticles, reverse micelle techniques provide the greatest flexibility and control over size, crystallinity, and magnetic properties. Recipes for the synthesis of manganese zinc ferrite, nickel zinc ferrite, and an enhanced ferrite are presented along with analysis of the crystalline and magnetic properties. Comparisons are made on the quality of nanoparticles produced using different surfactant systems. The importance of various reaction conditions is explored with a discussion on the corresponding effects on the magnetic properties, particle morphology, stoichiometry, crystallinity, and phase purity. 相似文献
12.
Deveau PA Arsac F Thivel PX Ferronato C Delpech F Chovelon JM Kaluzny P Monnet C 《Journal of hazardous materials》2007,144(3):692-697
The development of photocatalysis processes offers a significant number of perspectives especially in gaseous phase depollution. It is proved that the photo-oxidizing properties of photocatalyst (TiO(2)) activated by UV plays an important role in the degradation of volatile organic compounds (VOC). Heterogeneous photocatalysis is based on the absorption of UV radiations by TiO(2). This phenomenon leads to the degradation and the oxidation of the compounds, according to a mechanism that associates the pollutant's adsorption on the photocatalyst and radical degradation reactions. The main objective of the study is the understanding of the TiO(2)-photocatalysis phenomenon including gaseous and adsorbed phase mechanisms. Results obtained with three different apparatus are compared; gaseous phases are analysed and mechanisms at the gaseous phase/photocatalyst interface are identified. This study leads to improve understanding of various mechanisms during pollutant photodegradation: adsorption of pollutants on TiO(2) first takes place, then desorption and/or photodegradation, and finally, desorption of degradation products on TiO(2). The association of analytical methods and different processes makes the determination of all parameters that affect the photocatalytic process possible. Mastering these parameters is fundamental for the design and construction of industrial size reactors that aim to purify the atmosphere. 相似文献
13.
14.
15.
目的 为了探索类水滑石的低成本制备方法及插层改性增加其新功能的方法,提出类水滑石制备及其功能改性的环保新方向。方法 基于类水滑石的常规制备方法以及矿物原料和固废制备类水滑石的方法,综述类水滑石常规制备方法的优缺点,同时综述增强阻燃性能、吸附性能、催化性能、润滑性能、光催化、抗菌抗肿瘤、抗紫外线等性能的类水滑石的功能改性方法。结论 认为目前类水滑石制备及改性应加强2个方面的研究:利用矿物原料和钢渣、矿渣、粉煤灰等固体废弃物直接制备类水滑石,以降低其制备成本;利用水滑石和类水滑石的层状结构,以及层间阴离子的可交换的特性,加强其多种性能的改性。 相似文献
16.
K. Prakash P. Senthil Kumar S. Pandiaraj K. Saravanakumar 《Journal of Experimental Nanoscience》2016,11(14):1138-1155
SnO2 photocatalyst was successfully synthesised by novel chemical route in hydrothermal environment and annealed at two different temperatures viz 550 and 600 °C, respectively. The crystal structure, optical properties, surface and bulk morphology have been characterised using various tools like X-ray diffraction (XRD), UV visible spectroscopy, Fourier transform infrared spectroscopy, transmission electron microscope (TEM) and scanning electron microscope (SEM). Cubic, spheres and porous like morphology of SnO2 photocatalyst was successfully confirmed using SEM micrographs and TEM. In addition to this the photocatalytic activity was evaluated towards the degradation of methylene blue dye solution. SnO2 photocatalyst annealed at 600 °C exhibits excellent photocatalytic efficiency which may be attributed to the unique morphology, high crystalline nature and charge separation. The photocatalyst efficiency was further tested towards the concentration of dye, catalyst dosage and pH of the dye. The involvement of ?OH in the photocatalytic reaction was evidenced using trapping experiment by employing different scavengers. The photocatalyst was moderately active, stable upto its fifth usage and stability of the photocatalyst before and after the photocatalytic reaction was also been studied using XRD and SEM. 相似文献
17.
Tailoring magnetic and dielectric properties of rubber ferrite composites containing mixed ferrites 总被引:1,自引:0,他引:1
M. R. Anantharaman K. A. Malini S. Sindhu E. M. Mohammed S. K. Date S. D. Kulkarni P. A. Joy Philip Kurian 《Bulletin of Materials Science》2001,24(6):623-631
Rubber ferrite composites containing various mixed ferrites were prepared for different compositions and various loadings.
The magnetic and dielectric properties of the fillers as well as the ferrite filled matrixes were evaluated separately. The
results are correlated. Simple equations are proposed to predetermine the magnetic and dielectric properties. The validity
of these equations is verified and they are found to be in good agreement. These equations are useful in tailoring the magnetic
and dielectric properties of these composites with predetermined properties. 相似文献
18.
Nanosized bismuth ferrite powder prepared through sonochemical and microemulsion techniques 总被引:1,自引:0,他引:1
Two processing routes, namely sonochemical and microemulsion have been exploited to prepare bismuth ferrite powders. Phase pure nanosized BiFeO3 powders are prepared by sonochemical and microemulsion techniques in the temperature range of 400 °C and at 500 °C which is much lower than that of the conventional preparation methods. The XRD obtained from both cases was likely to be pure bismuth ferrite. Though the microemulsion based powders showed slightly better properties with respect to particle size, surface area, and final density, sonochemically prepared powders may be more acceptable considering the ease of preparation and cost effectiveness. 相似文献
19.
P. M. Prithviraj Swamy S. Basavaraja Arunkumar Lagashetty N. V. Srinivas Rao R. Nijagunappa A. Venkataraman 《Bulletin of Materials Science》2011,34(7):1325-1330
The self-propagating low-temperature combustion method was used to produce nanocrystalline particles of zinc ferrite. The products were characterized for chemical and phase composition, morphology and magnetic properties. The results obtained showed the formation of single-phase zinc ferrite nanoparticles with an average particle size of about 40 nm. As-synthesized powder displayed good magnetic property. Due to the simplicity and low cost of this process, it could also become a valuable starting point for the generation of other mixed and complex ferrites. 相似文献