Ferroelectric properties of Mn-Doped Bi3.15Nd0.85Ti3O12 thin films prepared under different annealing conditions

Mn-doped Bi_3.15Nd_0.85Ti₃O₁₂ (BNTM) thin films were fabricated on Pt/Ti/SiO₂/Si(100) substrates by a chemical solution deposition technique and annealed at different temperatures from 650 to 800 °C. The structures of the films were analyzed using X-ray diffraction, which showed that the BNTM films exhibit polycrystalline structures and random orientations. The surface morphologies of the samples were investigated using scanning electron microscopy. The average grain size of the films increases with increasing annealing temperature. Electrical properties such as remanent polarization (2P_r) are quite dependent on the annealing temperature of BNTM films. It is found that the film annealed at 750 °C exhibits excellent ferroelectricity with a remanent polarization of 2P_r = 89.3 μC/cm² and a coercive field of E_c = 99.2 kV/cm respectively.     

Leakage current characteristics of Bi3.15Nd0.85Ti3 − xZrxO12 thin films

Thin films of Bi_3.15Nd_0.85Ti₃O₁₂ (BNT) and Bi_3.15Nd_0.85Ti_3 − xZr_xO₁₂ (BNTZ_x, x = 0.1 and 0.2) were fabricated on Pt/TiO₂/SiO₂/Si(100) substrates by a chemical solution deposition (CSD) technique at 700 °C. Structures, surface morphologies, leakage current characteristics and Curie temperature of the films were studied as a function of Zr ion content by X-ray diffraction, atomic force microscopy, ferroelectric test system and thermal analysis, respectively. Experimental results indicate that Zr ion substitution in the BNT film markedly decreases the leakage current of the film, while almost not changing the Curie temperature of the film, which is at about 420-460 °C. The decrease of the leakage current in BNTZ_x films is that the conduction by the electron hopping between Ti⁴⁺ and Ti³⁺ ions is depressed because Zr⁴⁺ ions can block the path between two adjacent Ti ions and enlarge hopping distance.     

The improvement in ferroelectric performance of (Bi3.15Nd0.85)4Ti3O12 films by the addition of hydrogen peroxide in a spin-coating solution

Chemically synthesized (Bi_3.15Nd_0.85)Ti₃O₁₂ (BNT) films annealed at 650 °C for 15 min were prepared by different approaches to improve their fatigue problem. These approaches involved the selection of substrates with different overlayers, the addition of hydrogen peroxide (H₂O₂) to a spin-coating solution, and annealing in different atmospheres. BNT films on Ti-overlayered substrates had performed badly if processed at oxidation environments. BNT films on TiO₂-overlayered substrates displayed stable and unchanged fatigue endurance if the spin-coating solution was modified by drops of the H₂O₂ solution to lesson the formation of oxygen vacancies in crystalline films. They were also fatigue-free in ferroelectricity after 10¹⁰ switching cycles and had remanent polarization of 24 μm/cm², coercive field of 52 kV/cm, nonvolatile charge density of 13 μC/cm² during relaxed fatigue tests, and leakage current of 10^− 6 A at 3 V.     

Dependence of Zr content on electrical properties of Bi3.15Nd0.85Ti3-xZrxO12 thin films synthesized by chemical solution deposition (CSD)

The Bi_3.15Nd_0.85Ti_3-xZr_xO₁₂ (BNTZ) thin films with Zr content (x = 0, 0.05, 0. 1, 0.15, and 0.2) were prepared on Pt/Ti/SiO₂/Si (100) substrates by chemical solution deposition (CSD) technique. The crystal structures of BNTZ films were analyzed by X-ray diffraction (XRD). The effects of Zr contents on the ferroelectric, dielectric properties, and leakage current of BNTZ films were thoroughly investigated. The XRD results demonstrated that all the films possessed a single phase bismuth-layered structure and exhibited the highly preferred (117) orientation. Among these films, the film with Zr content x = 0.1 held the maximum remanent polarization (2P_r) of 50.21 μC/cm² and a low coercive field (2E_c) of 210 kV/cm.     

Multiferroic properties of BiFeO3/Bi4Ti3O12 double-layered thin films fabricated by chemical solution deposition

Multiferroic BiFeO₃/Bi₄Ti₃O₁₂ (BFO/BTO) double-layered film was fabricated on a Pt(111)/Ti/SiO₂/Si(100) substrate by a chemical solution deposition method. The effect of an interfacial BTO layer on electrical and magnetic properties of BFO was investigated by comparing those of pure BFO and BTO films prepared by the same condition. The X-ray diffraction result showed that no additional phase was formed in the double-layered film, except BFO and BTO phases. The remnant polarization (2P_r) of the double-layered film capacitor was 100 μC/cm² at 250 kV/cm, which is much larger than that of the pure BFO film capacitor. The magnetization-magnetic field hysteresis loop revealed weak ferromagnetic response with remnant magnetization (2M_r) of 0.4 kA/m. The values of dielectric constant and dielectric loss of the double-layered film capacitor were 240 and 0.03 at 100 kHz, respectively. Leakage current density measured from the double-layered film capacitor was 6.1 × 10^− 7 A/cm² at 50 kV/cm, which is lower than the pure BFO and BTO film capacitors.     

Synthesis of epitaxial BaZrO3 thin films by chemical solution deposition

This work reports on the low temperature preparation and characterization of BaZrO₃ (BZO) epitaxial thin films by chemical solution deposition (CSD). The X-ray θ-2θ scan and φ-scan measurements have demonstrated that the BZO films exhibit cube-on-cube epitaxy on (100) MgO substrates, with the full width at half maximum (FWHM) for the ω-scan and φ-scan of 0.35° and 0.46°, respectively. The SEM and AFM analyses revealed that the morphology of the films is strongly correlated with annealing temperature. The root mean square roughness for the film annealed at 600 °C is 3.63 nm, while for the film grown at 1000 °C is 5.25 nm.     

Texture control and ferroelectric properties of Pb(Nb,Zr,Sn,Ti)O3 thin films prepared by chemical solution method

A chelating and spin-coating procedure was used to prepare antiferroelectric thin films of Pb_0.99Nb_0.02[(Zr_0.84Sn_0.16)_0.982Ti_0.018]_0.98O₃. By controlling substrate and thermal processing conditions, films with strong (100) and (111) textures, as well as without textures, were prepared. These antiferroelectric films showed the characteristic double hysteresis polarization vs. electric field loops. An orientation dependence of the critical field for the antiferroelectric-to-ferroelectric phase transition was also observed. In addition, when the applied voltage exceeded a critical level during the first “ramp up,” an abnormal reduction in the area of the hysteresis loop was noticed in the (100) and (111) textured films.     

Enhancement of remnant polarization in multilayered Bi4Ti3O12/(Bi3.25La0.75)Ti3O12 films obtained by chemical solution deposition

Enhancement of remnant polarization was observed in artificially multilayered Bi₄Ti₃O₁₂ (BT)/(Bi_3.25La_0.75)Ti₃O₁₂ (BLT) films_. The multilayer were prepared on platinum coated silicon substrate by chemical solution deposition and compared with the single-phase BT, BLT and (Bi_3.5La_0.5)Ti₃O₁₂ films_. The multilayered film with a stacking periodicity of 60 nm BLT/30 nm BT shows a remnant polarization (2Pr) of about 61 μC/cm², which is much higher than those of the single-phase films. In addition, the multilayered films show a good fatigue-endurance character. After post-annealing the multilayered films at 700 °C for a long time (20 h), its remnant polarization decreased to a value close to the corresponding uniform film. Some possible mechanisms behind the polarization enhancement were proposed.     

Precursor chemistry for the solution deposition of epitaxial La0.66Sr0.33MnO3 (LSMO) thin films

A new chemical solution deposition method for the epitaxial growth of La_0.66Sr_0.33MnO₃ (LSMO) thin films from metal acetates, acetylacetonates and propionic acid is presented. Using this method, epitaxial LSMO thin films were grown on (001) SrTiO3 (STO) single crystalline substrates in the temperature range from 800 °C to 1100 °C, both in air and in oxygen atmosphere. The LSMO thin films exhibit good structural and electrical properties. The FWHM of the ω-scan for the (002) peak has a mean value of 0.06°. The Curie temperature of the LSMO thin films is about 320 K and 350 K for the annealed in oxygen and air, respectively.     

La-substitution Bi2Ti2O7 thin films grown by chemical solution deposition

(La_0.05Bi_0.95)₂Ti₂O₇ (LBTO) thin films had been successfully prepared on P-type Si substrate by chemical solution deposition method. The structural properties of the films were studied by X-ray diffraction. The phase of (La_0.05Bi_0.95)₂Ti₂O₇ is more stable than the phase of Bi₂Ti₂O₇ without La substitution. The films exhibited good insulating properties with room temperature resistivities in the range of 10¹²-10¹³ Ω cm. The dielectric constant of the film annealed at 550 °C at 100 kHz was 157 and the dissipation factor was 0.076. The LBTO thin films can be used as storage capacitors in DRAM.     

The optical properties of Bi3.25La0.75Ti3O12 thin films with different thickness prepared by chemical solution deposition

Bi_3.25La_0.75Ti₃O₁₂(BiLT) thin films with different thickness were successfully deposited onto fused quartz by chemical solution deposition. X-ray diffraction analysis shows that BiLT thin films are polycrystalline with (0 0 2)-preferred orientation. The dispersion of refractive indices of the BiLT thin films was investigated by the optical transmittance spectrum. The optical band gap energy was estimated from the graph of (hνα)² versus hν. The results show that the refractive index and band-gap energy of the BiLT thin films decrease with the films thickness.     

Testing field and annealing temperature dependence of leakage properties in Bi3.25La0.75Ti3O12 thin films

Ferroelectric Bi_3.25La_0.75Ti₃O₁₂ thin films annealed at different temperatures were prepared on Pt/Ti/SiO₂/Si substrates by metalorganic decomposition method. The leakage current behavior and the current conduction mechanism were investigated. For all films, the leakage current density − electric field (J−E) characteristic is confined within a “triangle” in the log (J)− log (E) plane bounded by three limiting curves: Ohm's law (J ∝ E), trap-filled-limit (J ∝ E^a, a > 1), and Child's law (J ∝ E²). At high field region, Bi_3.25La_0.75Ti₃O₁₂ thin films with grains of rod-like show higher leakage current, while films with grains of spherical- or planar-like exhibit lower leakage current.     

Enhanced magnetic properties of chemical solution deposited BiFeO3 thin film with ZnO buffer layer

Magnetic properties of BiFeO₃ films deposited on Si substrates with and without ZnO buffer layer have been studied in this work. We adopted the chemical solution deposition method for the deposition of BiFeO₃ as well as ZnO films. The x-ray diffraction measurements on the deposited films confirm the formation of crystalline phase of BiFeO₃ and ZnO films, while our electron microscopy measurements help to understand the morphology of few micrometers thick films. It is found that the deposited ZnO film exhibit a hexagonal particulate surface morphology, whereas BiFeO₃ film fully covers the ZnO surface. Our magnetic measurements reveal that the magnetization of BiFeO₃ has increased by more than ten times in BiFeO₃/ZnO/Si film compared to BiFeO₃/Si film, indicating the major role played by ZnO buffer layer in enhancing the magnetic properties of BiFeO₃, a technologically important multiferroic material.     

Microstructural and transport properties of LaNiO3−δ films grown on Si (111) by chemical solution deposition

Electrically conductive LaNiO_3−δ (LNO) thin films with typical thickness of 200 nm were deposited on Si (111) substrates by a chemical solution deposition method and heat-treated in air at 700 °C. Structural, morphological, and electrical properties of the LNO thin films were characterized by X-ray diffraction (XRD), atomic force microscopy (AFM), field-emission scanning electron microscopy (FEG-SEM), and electrical resistivity ρ(T). The thin films have a very flat surface and no droplet was found on their surfaces. The average grain size observed by AFM and FEG-SEM was approximately 100 nm in excellent agreement with XRD data. The ρ(T) data showed that these thin films display a good metallic character in a large range of temperature. These results suggest the use of this conductive layer as electrode in the integration of microelectronic devices.     

Composition, surface morphology and electrical characteristics of Al2O3-TiO2 nanolaminates and AlTiO films on silicon

We propose and demonstrate Metal-Oxide-Semiconductor structures comprising Al₂O₃-TiO₂ nanolaminate and AlTiO films. Composition, structural and electrical characteristics were studied in detail and compared to TiO₂ thin film-based structures. All dielectric films were evaporated using an electron beam gun (EBG) system on unheated p-Si substrate without adding O₂. MOS structures were investigated in detail before and after annealing at up to 950 °C in O₂ and N₂ + O₂ environments. The nanolaminate films remain in an amorphous state after annealing at 950 °C. The smallest quantum mechanical corrected equivalent oxide thickness measured was ∼1.37 nm. A large reduction of the leakage current density to 1.8 × 10^− 8 A/cm² at an electric field of 2 MV/cm was achieved by the annealing process.     

Unipolar resistive switching behavior of BiFeO3 thin films prepared by chemical solution deposition

Bismuth ferrite (BiFeO₃, BFO) thin films were spin-coated on Pt/Ti/SiO₂/Si substrates by a chemical solution deposition method. The ferroelectric BFO films annealed at 500 °C and 550 °C were found to possess unipolar resistive switching behaviors. The resistance ratio of the high resistance state (HRS) to the low resistance state (LRS) of the unipolar resistance switching is about 10³ for the ferroelectric BFO films. The conduction mechanisms are concluded to be space charge-limited conduction for the initial state and Ohmic conduction for the LRS. As for the HRS, the Poole-Frenkel emission fits well in the whole voltage region. Traps composed of oxygen vacancies are considered to play a key role in forming conducting paths. The relaxation time of electronic carriers is much shorter than that of ionic oxygen vacancies; therefore, the resistance switching is considered more probably due to carrier injection and emission through the Poole-Frenkel model after forming.     

The influence of annealing temperatures on the properties of Bi2VO5.5/LaNiO3/Si thin films

Bi₂VO_5.5 ferroelectric thin films were fabricated on LaNiO₃/Si(100) substrate via chemical solution deposition. Ferroelectric and dielectric properties of the thin films annealed at 500-700 °C were studied. The thin film annealed at 700 °C exhibited more favorable ferroelectric and dielectric properties than those annealed at lower temperatures. The values of remnant polarization 2P_r and coercive field E_c for the film annealed at 700 °C are 10.62 µC/cm² and 106.3 kV/cm, respectively. The leakage current of the film is about 1.92 × 10^− 8 A/cm² at 6 V. The possible mechanism of the dependence of electrical properties of the films on the annealing temperature was discussed.     

Structural and electrical properties of LuMnO3 thin film prepared by chemical solution method

Hexagonal LuMnO₃ thin films have been prepared based on a chemical solution deposition method. These films were deposited by spin-coating technique and annealed at different temperatures from 750 °C up to 850 °C, based on the thermogravimetric and differential thermal analysis results. An amorphous phase is observed in the film annealed at 750 °C, while a pure LuMnO₃ hexagonal phase is reached in the films annealed at 800 °C and 850 °C, along with a visible enhancement in the grain morphology as the annealing temperature increase. Low temperature magnetic analysis of the LuMnO₃ films annealed at 850 °C reveals several magnetic transitions, which are consistent with those reported for both LuMnO₃ ceramics and single crystals. Moreover, the emergence of a canted spin arrangement was evidenced from the temperature dependence of the specific induced magnetization and magnetic hysteretic cycles. No significant effect of the substrate on the magnetic properties was also sorted out. Dielectric measurements reveal the existence of a complex frequency behavior of the dielectric permittivity, which can be associated with relaxation processes arising from the interfaces film/electrodes.     

Size effects of polycrystalline lanthanum modified Bi4Ti3O12 thin films

The film thickness dependence on the ferroelectric properties of lanthanum modified bismuth titanate Bi_3.25La_0.75Ti₃O₁₂ was investigated. Films with thicknesses ranging from 230 to 404 nm were grown on platinum-coated silicon substrates by the polymeric precursor method. The internal strain is strongly influenced by the film thickness. The morphology of the film changes as the number of layers increases indicating a thickness dependent grain size. The leakage current, remanent polarization and drive voltage were also affected by the film thickness.     

Improved dielectric properties of chemical solution derived Pb0.5Sr0.5TiO3 thin films by a layer-by-layer annealing method

Pb_0.5Sr_0.5TiO₃ thin films were prepared on Pt/TiO₂/SiO₂/Si and LaNiO₃ (LNO)/Si substrates by using chemical solution deposition technique, and a layer-by-layer annealing method was used in an attempt to improve the dielectric properties of the thin films. The structure, dielectric, and ferroelectric properties of the thin films were investigated. Improved dielectric properties of the thin films were clearly confirmed: the dielectric constant and dielectric loss for the films on Pt/TiO₂/SiO₂/Si substrates annealed at 650 °C were 1064 and 0.027, respectively, at 1 kHz, with a dielectric tunability of more than 50%; similarly, the films prepared on LNO/Si substrates, showed a high dielectric constant of 1280 and a low dielectric loss of 0.023, at 1 kHz. P-E hysteresis loop measurements indicated that the remanent polarization and coercive field for the films on Pt/TiO₂/SiO₂/Si substrates annealed at 650 °C were 15.7 μC/cm² and 51 kV/cm, respectively.