共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
3.
供应链管理的战略管理策略 总被引:5,自引:0,他引:5
本文分析了供应链的定义,提出了供应链的概念模型,同时分析了供应链管理所包含的内容,在此基础上提出了供应链管理的层次模型,并详细阐述了战略管理策略。 相似文献
4.
从多刚体仿真分析、刚柔耦合仿真分析、机液耦合仿真分析三种角度提出了机液耦合机构的比较完整的仿真分析的实现策略,最后提出了仿真分析中应当注意的问题。 相似文献
5.
《机械制造与自动化》2017,(3):96-99
分析了骑行运动和洗衣机工作的各自特性,并结合各自的优点,创新地提出了多功能洗衣机的设计方案。对骑行部分,发电部分,洗衣部分等详细结构的设计思路,效率及可行性做出了论证与阐述。并对传动轴部件做了静态分析,对洗衣机的机箱做了模态分析并结合静态分析和模态分析结果,提出了优化方案。为进一步研究提供了基础。 相似文献
6.
在分析电力通信网通信电源系统基本结构的基础上,提出了通信电源故障分类和故障分析方法,并针对不同故障类型提出了详细的分析和处理措施。 相似文献
7.
8.
文章以变电站高压设备检修技术为研究对象,首先对变电站高压设备检修提出新要求的原因进行了分析,接着对其中的检修技术进行了分析研究并提出了相应的应对方法,主要包括:变电站高压断路器检修技术研究分析、隔离开关检修分析、状态检修技术分析。最后针对变电站高压设备检修技术的管理进行了分析研究。 相似文献
9.
新型单激励椭圆超声振动切削系统的研究 总被引:8,自引:0,他引:8
提出了一种新型的单激励纵弯复合椭圆振动切削系统的结构。通过理论分析揭示了实现振动方式转换的机理,提出了实现椭圆振动的条件和结构设计的方法。通过有限元动态数值模拟分析和实验验证了理论分析的结果。 相似文献
10.
玉米机械收获的现状及前景展望 总被引:2,自引:0,他引:2
介绍了我国玉米机械收获的发展现状,分析了当前玉米机械收获发展中存在的主要问题并提出了提高玉米机械收获水平所采取的具体方案。对当前玉米收获机械的技术特点、设计缺陷进行了分析总结,并提出技术改进思路。同时,结合滦南实际情况,分析了我县玉米机械收获的现状和发展方向,提出了加快玉米收获机械化的政策措施,并对玉米机械收获的前景进行了展望。 相似文献
11.
余昊喆 《现代制造技术与装备》2014,(2):28-29
数控机床的定位精度深刻影响加工零组件的精度与种类,在机械制造与设计领域,数控机床的定位准确度严重影响着机械制造的质量与水平。影响数控机床定位精度的因素有很多,环境因素更是主要的影响因素,外界热量引起的设计误差、机床伺服系统误差等都是影响数控机床定位精度的主要环境因素,只有合理控制环境因素,才能维持数控机床定位精度。 相似文献
12.
Analysis and compensation of positional and deformation errors using integrated fixturing analysis in flexible machining parts 总被引:1,自引:1,他引:0
H.T. Sánchez M. Estrems F. Faura 《The International Journal of Advanced Manufacturing Technology》2006,29(3-4):239-252
The final precision with which workpieces are formed strongly depends on good design and correct operation of fixtures. The
main errors introduced by fixtures are related to positioning, indentation and structural deformation. This paper describes
a procedure for studying these errors, which integrates positioning and deflecting fixturing analysis methods. These methods
are applied to the special case of flexible workpieces, which are fixed by hyperstatical fixturing systems when the roughing
and finishing operations are carried out in the same setup. Once these errors have been calculated by the integrating procedure,
all the information is introduced in a CADCAM database so that the above errors can be compensated during the machining operation
by means of a new cutting tool path provided by the CADCAM program. 相似文献
13.
提出了新的数控机床机械手柔性定位控制方法。在柔性条件下构建数控机床机械手双作业臂的运动学模型,基于该模型设计气动定位控制硬件与控制程序,硬件选用光编码器和分周处理器等设备,软件程序通过 PLC 来编制,从而实现对机械手手臂各关节及基座等位置的定位控制。测试结果表明:应用所提方法后,作业臂旋转关节定位变量值与其定位理想值十分接近;作业臂 1 、2 的定位变量值相对误差最高不超过 0.50° 、0.40° ,平均定位误差分别为 52.805 mm 、 58.055 mm 。说明所提方法的定位控制性能能够满足设计需求。 相似文献
14.
15.
16.
Samir Mekid 《Journal of Mechanical Science and Technology》2009,23(11):2873-2884
Some key aspects in the design of actuators for ultra precision systems will require particular attention as actuators have
to comply with ultra precision positioning and related tight specifications. The actuation is an important sub-group within
the overall system to be designed. Any design failure in this sub-group will degrade drastically the machine performance.
An interface analysis with immediate surrounding sub-groups is important to secure better generation of motion. In this paper,
a design procedure for an actuator dedicated to generate high precision motion is presented with a discussion of some important
aspects encountered when designing a friction drive. The procedure encompasses design concepts, axis stiffness, control, system
dynamics, and, error compensation using a dedicated control strategy compensating for errors. A case study is discussed. 相似文献
17.
“一面两销”定位是机械加工中工件与夹具、夹具与机床定位方式中最常用的一种形式,介绍了一种可调整式“一面两销”定位装置的设计特点,通过定位销基座的方式完成定位销和机床夹具本体的连接,同时具有位置可调性,从而满足定位销的位置优化。相对于固定式“一面两销”定位装置,在专用夹具设计应用中具有较大的便捷性、优越性和兼容性,能够针对夹具定位误差进行补偿校正,有效地消除各种定位误差带来误差影响,提高一面两销定位精度,大大提高工件加工的位置精度。 相似文献
18.
数控机床几何精度综合解析与试验研究 总被引:4,自引:0,他引:4
以对机床精度影响较大的几何误差为对象,通过理论与试验相结合,对其进行较深入的研究。基于多体系统理论,综合考虑各轴定位误差、直线度误差以及角度误差等几何误差元的耦合作用,提出一种机床综合误差建模方法,并在机床坐标系下建立三轴数控机床综合误差模型。通过利用激光干涉仪的大量试验得出定位误差、直线度误差以及角度误差曲线,分析证实定位误差相对于直线度误差和角度误差影响更为显著。以此为基础,进一步研究工作空间综合误差在各轴各误差元耦合作用下的分布和演变规律,发现综合误差在某轴向的分量与该轴的定位误差非常接近,给出定位误差是影响综合误差的决定性因素的结论。机床几何精度的分析对于机床精度补偿方法的选取与运用具有理论和实际意义。 相似文献
19.
介绍了一面两孔定位方案的设计方法及步骤,对几种典型加工精度参数在一面两孔定位方案下产生的定位误差的计算方法进行了分类总结,从而使一面两孔定位方案的设计过程变得十分简捷。 相似文献
20.
Assessing geometrical errors of multi-axis machines by three-dimensional length measurements 总被引:5,自引:0,他引:5
G. H. J. Florussen F. L. M. Delbressine M. J. G. van de Molengraft P. H. J. Schellekens 《Measurement》2001,30(4):241-255
In this paper a method is presented for assessing geometrical errors of multi-axis machines based on volumetric three-dimensional length measurements. A universal machine error model is proposed since a large variety of machine configurations exists. Such models can be used for software error compensation techniques in order to improve the machine’s positioning behaviour as well as for diagnostic purposes. Length measurements are chosen for the measurement of the positioning errors of a multi-axis machine because these measurements can be executed in a short period of time in a relatively simple way combined with a high accuracy. In order to get comparable results for the geometrical errors as measured with conventional techniques, i.e., laser interferometry, the design of the measurement setup as well as the formulation of the machine error model (including parameter correlation effects) appeared to be of major importance and are subject of this paper. 相似文献