Improvement of the k-means clustering filtering algorithm

In this paper, we present a modified filtering algorithm (MFA) by making use of center variations to speed up clustering process. Our method first divides clusters into static and active groups. We use the information of cluster displacements to reject unlikely cluster centers for all nodes in the kd-tree. We reduce the computational complexity of filtering algorithm (FA) through finding candidates for each node mainly from the set of active cluster centers. Two conditions for determining the set of candidate cluster centers for each node from active clusters are developed. Our approach is different from the major available algorithm, which passes no information from one stage of iteration to the next. Theoretical analysis shows that our method can reduce the computational complexity, in terms of the number of distance calculations, of FA at each stage of iteration by a factor of FC/AC, where FC and AC are the numbers of total clusters and active clusters, respectively. Compared with the FA, our algorithm can effectively reduce the computing time and number of distance calculations. It is noted that our proposed algorithm can generate the same clusters as that produced by hard k-means clustering. The superiority of our method is more remarkable when a larger data set with higher dimension is used.     

半监督的改进K-均值聚类算法

K-均值聚类算法必须事先获取聚类数目,并且随机地选取聚类初始中心会造成聚类结果不稳定,容易在获得一个局部最优值时终止。提出了一种基于半监督学习理论的改进K-均值聚类算法,利用少量标签数据建立图的最小生成树并迭代分裂获取K-均值聚类算法所需要的聚类数和初始聚类中心。在IRIS数据集上的实验表明,尽管随机样本构造的生成树不同,聚类中心也不同,但聚类是一致且稳定的,迭代的次数较少,验证了该文算法的有效性。     

The global k-means clustering algorithm

We present the global k-means algorithm which is an incremental approach to clustering that dynamically adds one cluster center at a time through a deterministic global search procedure consisting of N (with N being the size of the data set) executions of the k-means algorithm from suitable initial positions. We also propose modifications of the method to reduce the computational load without significantly affecting solution quality. The proposed clustering methods are tested on well-known data sets and they compare favorably to the k-means algorithm with random restarts.     

Fast modified global k-means algorithm for incremental cluster construction

The k-means algorithm and its variations are known to be fast clustering algorithms. However, they are sensitive to the choice of starting points and are inefficient for solving clustering problems in large datasets. Recently, incremental approaches have been developed to resolve difficulties with the choice of starting points. The global k-means and the modified global k-means algorithms are based on such an approach. They iteratively add one cluster center at a time. Numerical experiments show that these algorithms considerably improve the k-means algorithm. However, they require storing the whole affinity matrix or computing this matrix at each iteration. This makes both algorithms time consuming and memory demanding for clustering even moderately large datasets. In this paper, a new version of the modified global k-means algorithm is proposed. We introduce an auxiliary cluster function to generate a set of starting points lying in different parts of the dataset. We exploit information gathered in previous iterations of the incremental algorithm to eliminate the need of computing or storing the whole affinity matrix and thereby to reduce computational effort and memory usage. Results of numerical experiments on six standard datasets demonstrate that the new algorithm is more efficient than the global and the modified global k-means algorithms.     

基于Ward’s方法的k-平均优化算法及其应用

通过对k-平均算法存在不足的分析,提出了一种基于Ward’s方法的k-平均优化算法。算法首先在用Ward’s方法对样本数据初步聚类的基础上,确定合适的簇数目、初始聚类中心等k-平均算法的初始参数,并进行孤立点检测、删除;基于上述处理再采用传统k-平均算法进行聚类。将优化的k-平均算法应用到罪犯人格类型分析中,实验结果表明,该算法的效率、聚类效果均明显优于传统k-平均算法。     

A k-means type clustering algorithm for subspace clustering of mixed numeric and categorical datasets

Almost all subspace clustering algorithms proposed so far are designed for numeric datasets. In this paper, we present a k-means type clustering algorithm that finds clusters in data subspaces in mixed numeric and categorical datasets. In this method, we compute attributes contribution to different clusters. We propose a new cost function for a k-means type algorithm. One of the advantages of this algorithm is its complexity which is linear with respect to the number of the data points. This algorithm is also useful in describing the cluster formation in terms of attributes contribution to different clusters. The algorithm is tested on various synthetic and real datasets to show its effectiveness. The clustering results are explained by using attributes weights in the clusters. The clustering results are also compared with published results.     

Fast global k-means clustering using cluster membership and inequality

In this paper, we present a fast global k-means clustering algorithm by making use of the cluster membership and geometrical information of a data point. This algorithm is referred to as MFGKM. The algorithm uses a set of inequalities developed in this paper to determine a starting point for the jth cluster center of global k-means clustering. Adopting multiple cluster center selection (MCS) for MFGKM, we also develop another clustering algorithm called MFGKM+MCS. MCS determines more than one starting point for each step of cluster split; while the available fast and modified global k-means clustering algorithms select one starting point for each cluster split. Our proposed method MFGKM can obtain the least distortion; while MFGKM+MCS may give the least computing time. Compared to the modified global k-means clustering algorithm, our method MFGKM can reduce the computing time and number of distance calculations by a factor of 3.78-5.55 and 21.13-31.41, respectively, with the average distortion reduction of 5,487 for the Statlog data set. Compared to the fast global k-means clustering algorithm, our method MFGKM+MCS can reduce the computing time by a factor of 5.78-8.70 with the average reduction of distortion of 30,564 using the same data set. The performances of our proposed methods are more remarkable when a data set with higher dimension is divided into more clusters.     

Hybrid differential evolution algorithm for optimal clustering

The problem of optimal non-hierarchical clustering is addressed. A new algorithm combining differential evolution and k-means is proposed and tested on eight well-known real-world data sets. Two criteria (clustering validity indexes), namely TRW and VCR, were used in the optimization of classification. The classification of objects to be optimized is encoded by the cluster centers in differential evolution (DE) algorithm. It induced the problem of rearrangement of centers in the population to ensure an efficient search via application of evolutionary operators. A new efficient heuristic for this rearrangement was also proposed. The plain DE variants with and without the rearrangement were compared with corresponding hybrid k-means variants. The experimental results showed that hybrid variants with k-means algorithm are essentially more efficient than the non-hybrid ones. Compared to a standard k-means algorithm with restart, the new hybrid algorithm was found more reliable and more efficient, especially in difficult tasks. The results for TRW and VCR criterion were compared. Both criteria provided the same optimal partitions and no significant differences were found in efficiency of the algorithms using these criteria.     

基于变异精密搜索的蜂群聚类算法

针对K-means 聚类算法过度依赖初始聚类中心、局部收敛、稳定性差等问题, 提出一种基于变异精密搜索的蜂群聚类算法. 该算法利用密度和距离初始化蜂群, 并根据引领蜂的适应度和密度求解跟随蜂的选择概率P;  然后通过变异精密搜索法产生的新解来更新侦查蜂, 以避免陷入局部最优; 最后结合蜂群与粗糙集来优化K-means. 实验结果表明, 该算法不仅能有效抑制局部收敛、减少对初始聚类中心的依赖, 而且准确率和稳定性均有较大的提高.

     

Interval set clustering

Rough k-means clustering describes uncertainty by assigning some objects to more than one cluster. Rough cluster quality index based on decision theory is applicable to the evaluation of rough clustering. In this paper we analyze rough k-means clustering with respect to the selection of the threshold, the value of risk for assigning an object and uncertainty of objects. According to the analysis, clusters presented as interval sets with lower and upper approximations in rough k-means clustering are not adequate to describe clusters. This paper proposes an interval set clustering based on decision theory. Lower and upper approximations in the proposed algorithm are hierarchical and constructed as outer-level approximations and inner-level ones. Uncertainty of objects in out-level upper approximation is described by the assignment of objects among different clusters. Accordingly, ambiguity of objects in inner-level upper approximation is represented by local uniform factors of objects. In addition, interval set clustering can be improved to obtain a satisfactory clustering result with the optimal number of clusters, as well as optimal values of parameters, by taking advantage of the usefulness of rough cluster quality index in the evaluation of clustering. The experimental results on synthetic and standard data demonstrate how to construct clusters with satisfactory lower and upper approximations in the proposed algorithm. The experiments with a promotional campaign for the retail data illustrates the usefulness of interval set clustering for improving rough k-means clustering results.     

Improved rough k-means clustering algorithm based on weighted distance measure with Gaussian function

Rough k-means clustering algorithm and its extensions are introduced and successfully applied to real-life data where clusters do not necessarily have crisp boundaries. Experiments with the rough k-means clustering algorithm have shown that it provides a reasonable set of lower and upper bounds for a given dataset. However, the same weight was used for all the data objects in a lower or upper approximate set when computing the new centre for each cluster while the different impacts of the objects in a same approximation were ignored. An improved rough k-means clustering based on weighted distance measure with Gaussian function is proposed in this paper. The validity of this algorithm is demonstrated by simulation and experimental analysis.     

Parallel bisecting <Emphasis Type="Italic">k</Emphasis>-means with prediction clustering algorithm

In this paper, we propose a new parallel clustering algorithm, named Parallel Bisecting k-means with Prediction (PBKP), for message-passing multiprocessor systems. Bisecting k-means tends to produce clusters of similar sizes, and according to our experiments, it produces clusters with smaller entropy (i.e., purer clusters) than k-means does. Our PBKP algorithm fully exploits the data-parallelism of the bisecting k-means algorithm, and adopts a prediction step to balance the workloads of multiple processors to achieve a high speedup. We implemented PBKP on a cluster of Linux workstations and analyzed its performance. Our experimental results show that the speedup of PBKP is linear with the number of processors and the number of data points. Moreover, PBKP scales up better than the parallel k-means with respect to the dimension and the desired number of clusters. This research was supported in part by AFRL/Wright Brothers Institute (WBI).     

A fuzzy clustering algorithm based on evolutionary programming

In this paper, a fuzzy clustering method based on evolutionary programming (EPFCM) is proposed. The algorithm benefits from the global search strategy of evolutionary programming, to improve fuzzy c-means algorithm (FCM). The cluster validity can be measured by some cluster validity indices. To increase the convergence speed of the algorithm, we exploit the modified algorithm to change the number of cluster centers dynamically. Experiments demonstrate EPFCM can find the proper number of clusters, and the result of clustering does not depend critically on the choice of the initial cluster centers. The probability of trapping into the local optima will be very lower than FCM.     

Cluster center initialization algorithm for K-modes clustering

Partitional clustering of categorical data is normally performed by using K-modes clustering algorithm, which works well for large datasets. Even though the design and implementation of K-modes algorithm is simple and efficient, it has the pitfall of randomly choosing the initial cluster centers for invoking every new execution that may lead to non-repeatable clustering results. This paper addresses the randomized center initialization problem of K-modes algorithm by proposing a cluster center initialization algorithm. The proposed algorithm performs multiple clustering of the data based on attribute values in different attributes and yields deterministic modes that are to be used as initial cluster centers. In the paper, we propose a new method for selecting the most relevant attributes, namely Prominent attributes, compare it with another existing method to find Significant attributes for unsupervised learning, and perform multiple clustering of data to find initial cluster centers. The proposed algorithm ensures fixed initial cluster centers and thus repeatable clustering results. The worst-case time complexity of the proposed algorithm is log-linear to the number of data objects. We evaluate the proposed algorithm on several categorical datasets and compared it against random initialization and two other initialization methods, and show that the proposed method performs better in terms of accuracy and time complexity. The initial cluster centers computed by the proposed approach are close to the actual cluster centers of the different data we tested, which leads to faster convergence of K-modes clustering algorithm in conjunction to better clustering results.     

On cluster tree for nested and multi-density data clustering

Clustering is one of the important data mining tasks. Nested clusters or clusters of multi-density are very prevalent in data sets. In this paper, we develop a hierarchical clustering approach—a cluster tree to determine such cluster structure and understand hidden information present in data sets of nested clusters or clusters of multi-density. We embed the agglomerative k-means algorithm in the generation of cluster tree to detect such clusters. Experimental results on both synthetic data sets and real data sets are presented to illustrate the effectiveness of the proposed method. Compared with some existing clustering algorithms (DBSCAN, X-means, BIRCH, CURE, NBC, OPTICS, Neural Gas, Tree-SOM, EnDBSAN and LDBSCAN), our proposed cluster tree approach performs better than these methods.     

A MapReduce-based K-means clustering algorithm

The partitioning-based k-means clustering is one of the most important clustering algorithms. However, in big data environment, it faces the problems of random selection of initial cluster centers randomly, expensive communication overhead among MapReduce nodes and data skewing in data partitions, and others. To solve these problems, this paper proposes a parallel clustering algorithm based on grid density and local sensitive hash function (MR-PGDLSH) which takes into account the advantages of MapReduce and LSH (locality sensitive hash function). In the MR-PGDLSH, firstly the GDS (grid density strategy) is designed to obtain the relatively reasonable initial cluster centers. Then, a DP-LSH (data partition based on locality sensitive hash function) is proposed to divide the data set into multiple segments. The relevant data objects are mapped to the same sub-data set. The similarity function is designed to generate clusters, thereby reducing frequent communication overhead between nodes. Next, the AGS (adaptive grouping strategy) is applied to distribute the amount of data on each node evenly, which solves the problem of data skew on the node. Finally, the MR-PGDLSH is applied to mine the cluster centers in parallel, which obtains the final clustering results. Both theoretical analysis and experimental results have shown that the MR-PGDLSH is superior to the existing clustering algorithms.

     

A clustering method combining differential evolution with the K-means algorithm

The present paper considers the problem of partitioning a dataset into a known number of clusters using the sum of squared errors criterion (SSE). A new clustering method, called DE-KM, which combines differential evolution algorithm (DE) with the well known K-means procedure is described. In the method, the K-means algorithm is used to fine-tune each candidate solution obtained by mutation and crossover operators of DE. Additionally, a reordering procedure which allows the evolutionary algorithm to tackle the redundant representation problem is proposed. The performance of the DE-KM clustering method is compared to the performance of differential evolution, global K-means method, genetic K-means algorithm and two variants of the K-means algorithm. The experimental results show that if the number of clusters K is sufficiently large, DE-KM obtains solutions with lower SSE values than the other five algorithms.     

Two-phase clustering process for outliers detection

In this paper, a two-phase clustering algorithm for outliers detection is proposed. We first modify the traditional k-means algorithm in Phase 1 by using a heuristic “if one new input pattern is far enough away from all clusters' centers, then assign it as a new cluster center”. It results that the data points in the same cluster may be most likely all outliers or all non-outliers. And then we construct a minimum spanning tree (MST) in Phase 2 and remove the longest edge. The small clusters, the tree with less number of nodes, are selected and regarded as outlier. The experimental results show that our process works well.     

Automatically finding clusters in normalized cuts

Normalized Cuts is a state-of-the-art spectral method for clustering. By applying spectral techniques, the data becomes easier to cluster and then k-means is classically used. Unfortunately the number of clusters must be manually set and it is very sensitive to initialization. Moreover, k-means tends to split large clusters, to merge small clusters, and to favor convex-shaped clusters. In this work we present a new clustering method which is parameterless, independent from the original data dimensionality and from the shape of the clusters. It only takes into account inter-point distances and it has no random steps. The combination of the proposed method with normalized cuts proved successful in our experiments.     

A feature group weighting method for subspace clustering of high-dimensional data

This paper proposes a new method to weight subspaces in feature groups and individual features for clustering high-dimensional data. In this method, the features of high-dimensional data are divided into feature groups, based on their natural characteristics. Two types of weights are introduced to the clustering process to simultaneously identify the importance of feature groups and individual features in each cluster. A new optimization model is given to define the optimization process and a new clustering algorithm FG-k-means is proposed to optimize the optimization model. The new algorithm is an extension to k-means by adding two additional steps to automatically calculate the two types of subspace weights. A new data generation method is presented to generate high-dimensional data with clusters in subspaces of both feature groups and individual features. Experimental results on synthetic and real-life data have shown that the FG-k-means algorithm significantly outperformed four k-means type algorithms, i.e., k-means, W-k-means, LAC and EWKM in almost all experiments. The new algorithm is robust to noise and missing values which commonly exist in high-dimensional data.